Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This 5-leaf slipper spring is 32-1/2" long x 2-1/2" wide. It is designed for use on trailers with 10,000-lb axles.
Features:
Specs:
| Part Number | A | B | C | D |
|---|---|---|---|---|
| 093161 | 32-1/2" | 29" | 4" | 14" |
Leaf springs are an integral part of your trailer suspension system. The slipper spring is suspended at one end by a hanger that attaches to the eye. The other end slips into a hanger or, in the case of tandem-axle or triple-axle systems, into an equalizer. To determine the type of hangers or hanger kit you need, you must know the specific type of leaf spring you have, as well as your axle diameter and capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications.
Please Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Video of 5-Leaf Slipper Spring for 10,000-lb Trailer Axles
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today well be taking a look at part number 093161, the 5-Leaf Slipper Spring for 10,000-lb Trailer Axles.Before ordering a spring for you axle, there are a few things you need to know first. This spring measures 29 inches long by 2 inches wide. Youll need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This springs half-length is 14 inches. One more measurement you will need to take is the springs height. To get this measurement, well draw a line from the center of the eye mount to the top of the leaf surface and then measure from that line to the top of the leaf surface at the leaf bolt.
This spring measures 4 inches high.Youll notice that it does have 5 leaves within it giving it the ability to support 5,000 lbs. When you multiply that by two per axle, you get your 10,000-lb total spring capacity.Youll notice that the mounting point on this spring is a inch diameter with a rubber bushing.And that does it for part number 093161, the 5-Leaf Slipper Spring for 10,000-lb axles.
Customers Who Purchased This Trailer Suspension Also Bought...
Ask the Experts about this Redline Trailer Suspension
Do you have a question about this Trailer Suspension?
