Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
2008 Toyota Prius Roof Rack by Yakima
Roof Rack Includes:
Q5 Q Clips for Yakima Q Towers (QTY 2)
Q124 Q Clips for Yakima Q Towers (QTY 2)
Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
Part Numbers: Y00605, Y00724, Y00409, Y00124
Retail:$334.00
Price:$300.60
Shipping SpecialQ5 Q Clips for Yakima Q Towers (QTY 2)
part number: Y00605
Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.
Features:
- Work with Yakima Q Towers to form base for aftermarket roof-rack system
- Required for mounting Q Towers to vehicle doorframe
- Designed as vehicle-specific application
- Provide base pads for bottom of Q Towers
- Pads keep towers from damaging vehicle paint job
- Constructed of thin, strong, stainless steel
- Resists rust
- Will not interfere with door closure
Specs:
- Quantity: 2
- 2 Kits required for most vehicles
- Vehicles often require two different sets of clips for installation of Q Towers
- Lifetime warranty
8000605 Q5 Clips for Yakima Q Towers
Q124 Q Clips for Yakima Q Towers (QTY 2)
part number: Y00724
Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.
Features:
- Work with Yakima Q Towers to form base for aftermarket roof-rack system
- Required for mounting Q Towers to vehicle doorframe
- Designed as vehicle-specific application
- Provide base pads for bottom of Q Towers
- Pads keep towers from damaging vehicle paint job
- Constructed of thin, strong, stainless steel
- Resists rust
- Will not interfere with door closure
Specs:
- Quantity: 2
- 2 Kits required for most vehicles
- Vehicles often require two different sets of clips for installation of Q Towers
- Lifetime warranty
8000724 Q124 Clips for Yakima Q Towers
Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00409
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Features:
- Serve as backbone of your aftermarket roof-rack system
- Provide stability to roof-mounted racks
- Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
- Fit all Yakima towers
- Constructed from vinyl-coated, galvanized steel
Specs:
- Quantity: 2
- Capacity (depending on application):
- 5 Bikes
- Yakima SkyBox Pro 12, PowderHound and 1 bike
- 2 Kayaks
- 2 Bikes and Yakima BasketCase
- 2 Kayaks on Yakima Kayak Stacker and 2 bikes
- Yakima SkyBox Pro and 2 bikes
- Yakima SkyBox Pro and kayak on HullRaiser
- Dimensions: 1-1/8" diameter x 58" long
- Steel wall: .085" thick
- Lifetime warranty
NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).
8000409 Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
part number: Y00124
For vehicles with a naked roof, Q Towers provide the base for building your own from-scratch system. Towers hold crossbars securely in place and ensure a perfect fit, with clips (sold separately) that are vehicle specific.
Features:
- Provide base for rack system on vehicles without rain gutters or factory racks
- Ensure perfect fit with tower and clip that move in 4 different ways (Quadruple Movement)
- Attach using interchangeable, vehicle-specific Q Clips (sold separately)
- Adjust to contours of vehicle with ball-and-socket mechanism
- Have die-cast interior to form solid, sturdy anchor to support load
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Remove and install quickly and easily following initial setup
Specs:
- Quantity: 4
- Additional components required for complete roof-rack system
- Q-Clips (sold separately) for vehicle-specific mounting
- Crossbars (sold separately) to provide attachment point for accessories
- SKS Cores required: 4
- Height: 5-1/4" from base to top of bar
- Lifetime warranty
8000124 Yakima Q Towers for Roof Rack Base (QTY 4)
Video of Yakima Q Tower Roof Rack Installation - 2007 Toyota Prius
Video Transcript for Yakima Q Tower Roof Rack Installation - 2007 Toyota Prius
Today we are going to be installing a Yakima roof rack on a 2007 Toyota Prius. We will be using 58 inch crossbars part number Y00409 and a set of Q-towers part number Y00124. We will also be using Q-clips designed to specifically fit our car. We will be using Q-clip Q124 and that is part number Y00724 and Q-clip number Q5. That is part number Y00605. These are our Q-clip sets. A Q-clip set will contain two metal brackets and two rubber patches. These rubber patches are designed to fit the contours of your vehicle and will snap into the bottom of our Q-tower. The Q-clips are contoured to fit the shape of your vehicle inside the door frame. We will be using the Q5 clips up front and the Q124 clips in the rear. 0:56
These are the Q-towers. These form the base for our roof rack. On the bottom, you can see where our rubber patches are going to attach. The crossbars themselves will fit through the top of our Q-tower. Included with the Q-tower are these core plugs. These will take the space of the optional lock cores on our Q-tower. You can add a set of Yakima lock cores so that you can secure the roof rack to the vehicle. These are the ends caps that we are going to snap into the ends of our crossbars. And finally, these are the crossbars themselves. They are a traditional round Yakima style crossbar and they will allow you to use virtually any roof rack accessory designed for round crossbars. 1:33
The first step is preparing our Q-tower. We are going to take the rubber pad from our Q5 clip and attach it to the bottom of our Q-tower. They simply press into place. Next we are going to attach our Q-towers to our crossbar. We will pull open this door here on the side so that we can access our tightening bolt. This is what will allow us to clamp down to our crossbar. We will slip the crossbar through our Q-tower and we will take the included Allen key and snug this bolt down. We do not need to lock anything down yet because we are going to have to adjust the position to make sure we have the right span. Then we will come over to the other end and do the same with the other Q-tower. 2:12
Next what we need to do is check the measurement from one Q-tower to the other. On this installation with our Prius we need to be at 42-1/2 inches from here to here. We will go ahead and pop our crossbar caps in now that we have our measurement set. Next we are going to take our Q-clips and fit them inside the tower. They just fit in the slots on the side of the clamp bracket. Then we will take our core holder and push it in place from the back. And we will push the retaining clips in to hold the core holder in place. We will do the same for the other side. Next we are ready to head to the car. First we will open the door on both the driver and passenger side and then we will lift our crossbar assembly into place. Next we will check our instructions for our measurements. We need to be 10 inches from the edge of the windshield to the leading edge of our Q-tower. Right now, we are at about 7-1/2 inches so we need to move back just a little bit. 3:10
We now have our Q-towers set 10 inches back from our windshield. Next we are going to come to our clips and use this adjusting screw to tighten them up. You want there to be a little bit of tension when you go to lock down the Q-towers on either side. You should not have to force it or put a lot of weight into it to get it to seat. In the rear, the spread between the Q-towers along the crossbar needs to be 40 inches. For the rear crossbar, we need to make sure our spread is 30 inches center on center. So we are going to measure from the center of the first crossbar to the center of the rear and we are right at 30 inches, where we need to be. And that does it for the Yakima roof rack installation on our 2007 Toyota Prius.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Which Q Clips Install on the Front and the Back of a 2003 Mazda Protege
- Yes, the Q5 Clips # Y00605 are for the front and the Q34 Clips # Y00634 are for the rear. I attached a video of each of these clips being installed on a vehicle for you to check out also.
view full answer... - Will 50 Inch Thule Load Bars Fit Instead of 58 Inch Yakima Cross Bars for 2010 Toyota Prius
- I used our Fit Guide to determine which cross bars will work for your 2010 Toyota Prius. I found that the 50 inch Thule Loadbars, part # THLB50, will fit your 2010 Toyota Prius, if you do not have a glass roof. If there is a glass roof, you will need to go with the 58 inch Yakima Crossbars. Also, the 48 inch Yakima Crossbars, part # Y00408, will not fit your 2010 Toyota Prius.
If your vehicle does not have the glass roof, and you decide to use the Thule Loadbars, part # THLB50, you will need
view full answer... - Suitcase Mounting Options on a 2009 Ford Taurus X sel with Roof Rack
- There are many different ways to attach your suitcase to the roof rack on your 2009 Ford Taurus X sel, but you will have to have crossbars that run perpendicular to the side rails. If you do not have crossbars, then I recommend getting the Yakima RailGrab Roof Rack. This roof rack uses the RailGrab Towers, # Y00138, that attach to the side rails on your roof and hold the round crossbars, # Y00409. This is also our most economical roof rack system designed for your vehicle.
I have attached an
view full answer... - Roof Rack and Kayak Carrier Recommendation for a 2012 Ford Focus.
- We carry many roof rack and kayak carrier options for your 2012 Ford Focus. The roof rack that I would recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the Q5 Q Clips, # Y00605, the Q83 Q Clips, # Y00683, and the Q Tower Feet, # Y00124. This will provide you with two crossbars to mount your kayak or kayak carrier to.
I have attached a link to all of the roof rack options that will fit your vehicle for you to check out.
You can mount your kayak dire
view full answer... - Roof Rack Recommendation for a 2002 Ford Windstar
- To install tracks in the grooves on the roof of your Windstar you will have to have a custom installation done. I checked with my contacts at Thule and Yakima and they do not offer a custom fit track for your vehicle at this time.
Yakima has a system, if your 2002 Windstar has the dual sliding doors, that will provide crossbars for carrying cargo or bikes on the top of the vehicle. To install this system you will need 3 parts.
Yakima Q Towers item # Y00124
Round 58" CrossBars for Yakima
view full answer... - Parts Needed to Install a Roof Rack for a Snowboard Carrier on a 2006 Hyundai Elantra 4 Door
- You will need the following items to install a roof rack on your 2006 Hyundai Elantra 4 Door.
Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4), item # Y00124
Round 48 inch CrossBars for Yakima Roof Rack System (QTY 2), item # Y00408
Q99 Q Clips for Yakima Q Towers (QTY 2), item # Y00699 Qty of 2 for Front and Back (4 altogether)
view full answer... - Complete Custom Fit Roof Rack System and Kayak Carrier for a 2004 Volkswagen New Beetle
- The racks available for your 2004 Beetle have been tested on the actual vehicle they are made for. That is how the companies determine that they will fit.
Everything you will need to install a roof rack on your 2002 V-dub New Beetle is included in the Yakima complete roof rack system (itemized below). You would then be able to add a kayak carrier like the Yakima HullRaiser J-Style Roof Mounted Kayak Carrier, # Y04039.
For the Yakima kit you will need a total of 2 sets of Q123 Q Clips, # Y0
view full answer... - Will Yakima Q Towers Roof Rack Feet and Load Bars Fit on a 2010 Jayco J Series Pop Up Camper
- Yes, you can use the Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4), # Y00124, on top of your 2010 Jayco pop up camper. First, you will need Bolt-On TopLoader Mounting Brackets for Yakima 1A Raingutter Towers, Q Towers, # Y08005, so you can mount the towers. These are sold in pairs so you will need two sets to install all four towers.
You would then just need to add load bars depending on how wide your camper is. I have included a link to our Yakima load bar main page below.
view full answer... - Should the Yakima Bolt TopLoader, # Y08005, Be Mounted through the Roof or Sidewall of a Trailer
- You should mount the TopLoader, # Y08005 and Q Towers, # Y00124 through the single-wall areas on the top (roof) and not the sidewall according to the Yakima instructions for the Bolt-On Top Loader. I have included a link to a video installation of a Yakima roof rack system below.
view full answer... - Fitting Of The Yakima Q Towers Roof Rack Feet, # Y00124, On A 2000 Mercury Mystique
- On the Yakima Q Towers Roof Rack Feet, # Y00124, for the 2000 Mercury Mystique there is a footnote in the instructions.
It says placement of the clips for this vehicle requires pulling a portion of the interior weather seal off from the door frame. Place the clips over the exposed steel ledge. Replace weather seal by pushing over clip and ledge.
I have a picture of how to attach the clips under the weather seal. I will send the picture in a separate email.
That might be what is keeping
view full answer... - Roof Rack Recommendation for a 2000 Saturn L Series
- You would need 2 sets of Q54 Q Clips for Yakima Q Towers, part # Y00654.
Then you could use the Round 48 inch CrossBars, part # Y00408, as well as the Yakima Q Towers Roof Rack Feet, part # Y00124, from your 1997 Ford Escort Wagon and you would have all you need for a roof rack on your 2000 Saturn L Series.
I attached a link to a video below that shows a Yakima rack being installed on a very similar Saturn L-Series as yours.
view full answer... - Roof Rack Recommendation for a 1996 Volkswagen Jetta
- Yes, the Yakima Q Towers Roof Rack Feet, part # Y00124, is the correct foot pad to use on your 1996 Volkswagen Jetta.
If you wanted the complete roof rack system you would also need two sets of Q76 Q Clips, part # Y00676, and a Round 48 inch CrossBars for Yakima Rack, part # Y00408.
I attached a review video of this roof rack system below for you to check out as well as manufacturer instructions for the # Y00124.
view full answer... - What Parts Are Needed To Install A Complete Yakima Roof Rack On A 2002 Infiniti I-35
- The Yakima Q Tower Roof Rack Feet for Naked Roof, part # Y00124, are just the Q Tower feet in the roof rack system. To complete the roof rack system for your 2002 Infiniti I-35 you will also need two of the Q106 Q Clips for Yakima Q Towers, part # Y00706, and one of the Round 48 Inch CrossBars for Yakima Roof Rack System, part # Y00408. This system will let you attach roof rack accessories that will require a crossbar spread of 27 inches or less.
With this Yakima roof rack system installed on
view full answer... - Availability of a Roof Rack for a 2009 Jayco Series 1006 Trailer
- If your 2009 Jayco trailer has a fiberglass roof, you can first install Yakima tracks like # Y01135 (60 inches long), # Y01127 (54 inches long), or # Y01126 (42 inches long). Then, you can add LandingPad 6 for Yakima Control Towers, # Y00226, and Control Towers, # Y00214. You would then add Yakima cross bars of the width you need, like the 86 inch long bars, # Y00420.
The cross bars are 58 inches wide and the tracks are 42 inches long. You will need to measure your trailer to make sure there
view full answer... - Recommendations To Carry Luggage On My 2000 Ford Windstar Van
- To carry luggage on the roof of your 2000 Ford Windstar, you will need to install a roof rack. I would recommend the Yakima Roof Rack. If your vehicle has a bare roof without any tracks that run front to back, you will need the Yakima Roof Rack, part # Y00628 (quantity of 2), Y00409, Y00124. If your Windstar does have tracks that run front to back, you will need Yakima Roof Rack, part # Y00221 (quantity 2), Y00408, Y00214.
You will want to also use a roof cargo basket to carry the luggage on
view full answer... - Will Roof Rack Feet from a 2008 Honda Civic Install on a 2012 Honda CR-V
- If the feet that you are referring to are the feet of a roof rack, then they may be compatible with your 2012 Honda CR-V, but it will depend on the brand of the feet.
At this time the only roof rack that is compatible with your CR-V is the Yakima Q Tower Roof Rack. This roof rack consists of two crossbars, # Y00409, Q99 Q Clips, # Y00699, Q83 Q Clips, # Y00683, and the Q Tower Feet, # Y00124. If the feet that you have are not the same as the parts that I have just referenced, then they will
view full answer... - Yakima Roof Rack for a 2004 Ford Mustang GT
- We have not installed a Yakima roof rack on a 2004 Ford Mustang, but Yakima has. I included a pictured showing the rack installed. Bascially what will happen is that when the clips and feet are properly tightened down the clips will pull up and out of the way of glass window.
The parts needed to install a Yakima roof rack are:
Crossbars # Y00409
Q56 Clips, # Y00656
Q50 Clips, # Y00650
Q Towers, # Y00124
And if you wanted more space between the crossbars use the stretch kit # Y00134.
view full answer...
