Select Your Vehicle



2007 Toyota Camry Roof Rack by Yakima

Roof Rack Includes:

Q5 Q Clips for Yakima Q Towers (QTY 2)
Q35 Q Clips for Yakima Q Towers (QTY 2)
Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)


Yakima

Part Numbers: Y00605,Y00635,Y00409,Y00124

Price:$370.00

Shipping Special





Q5 Q Clips for Yakima Q Towers (QTY 2)
part number: Y00605

Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.

Features:

  • Work with Yakima Q Towers to form base for aftermarket roof-rack system
    • Required for mounting Q Towers to vehicle doorframe
  • Designed as vehicle-specific application
  • Provide base pads for bottom of Q Towers
    • Pads keep towers from damaging vehicle paint job
  • Constructed of thin, strong, stainless steel
    • Resists rust
    • Will not interfere with door closure


Specs:

  • Quantity: 2
  • 2 Kits required for most vehicles
    • Vehicles often require two different sets of clips for installation of Q Towers
  • Lifetime warranty


8000605 Q5 Clips for Yakima Q Towers



Q35 Q Clips for Yakima Q Towers (QTY 2)
part number: Y00635

Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.

Features:

  • Work with Yakima Q Towers to form base for aftermarket roof-rack system
    • Required for mounting Q Towers to vehicle doorframe
  • Designed as vehicle-specific application
  • Provide base pads for bottom of Q Towers
    • Pads keep towers from damaging vehicle paint job
  • Constructed of thin, strong, stainless steel
    • Resists rust
    • Will not interfere with door closure


Specs:

  • Quantity: 2
  • 2 Kits required for most vehicles
    • Vehicles often require two different sets of clips for installation of Q Towers
  • Lifetime warranty


8000635 Q35 Clips for Yakima Q Towers



Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00409

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Features:

  • Serve as backbone of your aftermarket roof-rack system
  • Provide stability to roof-mounted racks
  • Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
  • Fit all Yakima towers
  • Constructed from vinyl-coated, galvanized steel


Specs:

  • Quantity: 2
  • Capacity (depending on application):
    • 5 Bikes
    • Yakima SkyBox Pro 12, PowderHound and 1 bike
    • 2 Kayaks
    • 2 Bikes and Yakima BasketCase
    • 2 Kayaks on Yakima Kayak Stacker and 2 bikes
    • Yakima SkyBox Pro and 2 bikes
    • Yakima SkyBox Pro and kayak on HullRaiser
  • Dimensions: 1-1/8" diameter x 58" long
  • Steel wall: .085" thick
  • Lifetime warranty

NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).



8000409 Round 58" CrossBars for Yakima Roof Rack System (QTY 2)



Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4)
part number: Y00124

For vehicles with a naked roof, Q Towers provide the base for building your own from-scratch system. Towers hold crossbars securely in place and ensure a perfect fit, with clips (sold separately) that are vehicle specific.

Features:

  • Provide base for rack system on vehicles without rain gutters or factory racks
  • Ensure perfect fit with tower and clip that move in 4 different ways (Quadruple Movement)
    • Attach using interchangeable, vehicle-specific Q Clips (sold separately)
  • Adjust to contours of vehicle with ball-and-socket mechanism
  • Have die-cast interior to form solid, sturdy anchor to support load
  • Are lockable with Same Key System (SKS) Cores (sold separately)
    • Cores lock crossbars to towers and towers to vehicle roof
    • SKS Cores can be changed out to make all your Yakima locks keyed alike
  • Remove and install quickly and easily following initial setup


Specs:

  • Quantity: 4
  • Additional components required for complete roof-rack system
    • Q-Clips (sold separately) for vehicle-specific mounting
    • Crossbars (sold separately) to provide attachment point for accessories
  • SKS Cores required: 4
  • Height: 5-1/4" from base to top of bar
  • Lifetime warranty


8000124 Yakima Q Towers for Roof Rack Base (QTY 4)



Video of demo-yakima-roof-rack-and-fit-kit-Y0605-Y00124-Y0408


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of yakima roof rack and fit kit Y0605 Y00124 Y0408
Yakima Q Tower Roof Rack System Review
Video install yakima q towers 2014 toyota camry y00408
Yakima Q Tower Roof Rack Installation - 2014 Toyota Camry
Video install yakima q towers 2014 toyota camry y00409
Yakima Q Tower Roof Rack Installation - 2014 Toyota Camry
Video install yakima q towers 2012 toyota camry y00409
Yakima Q Tower Roof Rack Installation - 2012 Toyota Camry
Video install yakima q towers 2011 toyota camry
Yakima Q Tower Roof Rack Installation - 2011 Toyota Camry
Video install yakima q towers 2010 toyota camry
Yakima Q Tower Roof Rack Installation - 2010 Toyota Camry
Video install yakima q towers 2011 toyota corolla
Yakima Q Tower Roof Rack Installation - 2011 Toyota Corolla
Video install yakima roof rack 2007 toyota prius
Yakima Q Tower Roof Rack Installation - 2007 Toyota Prius
Video install yakima q towers 2011 chevy aveo
Yakima Q Tower Roof Rack Installation - 2011 Chevrolet Aveo
Video install yakima q towers 2010 chevy aveo
Yakima Q Tower Roof Rack Installation - 2010 Chevrolet Aveo
Video install yakima q towers 2014 dodge avenger y00409
Yakima Q Tower Roof Rack Installation - 2014 Dodge Avenger
Video install yakima q towers 2011 dodge avenger
Yakima Q Tower Roof Rack Installation - 2011 Dodge Avenger
Video install yakima q towers 2010 dodge avenger
Yakima Q Tower Roof Rack Installation - 2010 Dodge Avenger
Video install yakima q towers 2009 hyundai sonata
Yakima Q Tower Roof Rack Installation - 2009 Hyundai Sonata
Video install yakima q towers 2013 kia optima y00409
Yakima Q Tower Roof Rack Installation - 2013 Kia Optima
Video install yakima q towers 2012 jeep grand cherokee
Yakima Q Tower Roof Rack Installation - 2012 Jeep Grand Cherokee


Video Transcript for Yakima Q Tower Roof Rack System Review

Today we are going to cover the typical components of a Yakima roof-rack system. We will start from the bottom and work our way up. On the bottom part are the actual pieces that are going to make actual contact with the vehicle, and those parts are referred to as Q Clips, part number Y0605. They actually adapt the rack to the car itself. And this is a set of the Towers right here, part number Y00124. These go from the roofline to the crossbars. And the Q Towers are lockable, so no one can take them off your vehicle. They do come with the cases for the locks themselves. These do not have the key lock inside them you do have to add the cores to them yourself. And that is part of Yakimas SKS System. And then the last part is the crossbars themselves, part number Y0408. And these bars come in various lengths, designed for specific applications. What we will do now is go ahead and assemble these components and actually install them on a typical application. In this case, we are actually going to install this on a 2005 Volkswagen Jetta.

We have the components for one corner of the rack system to give you an idea of how they go together. First off, we are going to open up the latch here, and there is a little adjustment screw right here. It actually fine-tines your adjustment to snug down the brackets to your car. And when you have them tight enough, you just close them to latch into place. We will go ahead and take out this screw and install the Fit Kit first. What happens here is that this Fit Kit part will fit on the bottom side here, and these corners - these corners right here - will actually fit into these slots. It is kind of a press fit, so you have to push pretty hard to get it in there. All right, once you get the corners started in there, then just push it together. And you can see how it fits into the corners here. And the next thing to do is to get it lined up with the keyhole here so we can attach the lock holder itself. And it is keyed, so it can go in only one way. And when you have it installed, put your clip in there that holds it in place. Now we can go ahead and reinstall this back into our Tower. And you do not have to go all the way in, maybe halfway, because you will have to go back and adjust both sides evenly when you install it on the vehicle. Now we will put our pad in for the Fit Kit, and the pad simply snaps into place. And that takes care of the Tower, and we only have three more to go.

When they come from the factory, the clamp for the bar itself is compressed, so you need to take the clamp loose so you can slide it on the bar. What you want to do is, this little plastic cover here, you want to pull that back out to get to the little assembly screw right here. And you have just got to undo it with the included Allen key. And then you just want to loosen it up a little bit and then push that tab down so you have a nice, round circle on the inside. This is the part that actually gets clamped up against the crossbar so it does not go anywhere. And then install our endcap. Repeat the same procedure for the other side of this bar and for the other bar, too. And then this rack will be ready to install on our vehicle. Now the instructions that come with the kit and the Fit Kit will tell you exactly where to mount these on the vehicle. So you actually snug this up, then the bar here actually snugs it down to the roofline. And you may have to adjust it a little bit left and right and on the threads of the center bolt to make sure you latch it on tight. All right, and then just repeat the same process for the rear crossbar. And with that, your roof rack is ready to add your accessory to it.




Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Which Q Clips Install on the Front and the Back of a 2003 Mazda Protege
  • Yes, the Q5 Clips # Y00605 are for the front and the Q34 Clips # Y00634 are for the rear. I attached a video of each of these clips being installed on a vehicle for you to check out also.
    view full answer...

  • Recommendations to Add Cargo Space Via Roof Rack and/or Cargo Carrier to a 2013 Volkswagen Passat
  • Indeed there are roof cargo carrying solutions for your 2013 Volkswagen Passat, you have several options: As a first step, you would need crossbars such as the Yakima Q Tower System. To obtain a complete set you need to order the following: Y00409 (set of 2) CrossBars: Y00635 (set of 2) Q35 Q Clips: Y00728 (set of 2) Q128 Q Clips: Y00124 (set of 4) Q towers Rack Feet. With the crossbars installed you can then look in several directions. If you would like a soft sided cargo bag,
    view full answer...

  • Recommended Yakima Q Clips for a 2013 Hyundai Accent GLS
  • The correct Yakima Q Clips for your 2013 Hyundai Accent GLS are the Q35 Q Clips, # Y00635, for the rear crossbar and the Q99 Q Clips, # Y00699, for the front crossbar. Due to the shape of your roof line, different Q Clips are required for the front and back. To complete the Q Tower roof rack, you will also want to add the 48 inch crossbars, # Y00408, and the Q Tower Feet, # Y00124. The Yakima round crossbars are compatible with almost any roof mounted accessory on the market. You can
    view full answer...

  • Parts Needed to Carry Surfboards on a 1991 Honda Accord Wagon Without a Roof Rack
  • There are several parts needed to carry surf boards on the roof of your 1991 Honda Accord Wagon without factory rails or crossbars. First you will need the complete roof rack system that includes the Q35 Q Clips, # Y00635, that you mentioned for the front of the roof, the Q6 Q Clips, # Y00606, for the rear of the roof, the Yakima Q Towers, # Y00124, and the Round 48 inch CrossBars, # Y00408. Then you would need a system for carrying surfboards on the roof rack system. For the 1991 Honda
    view full answer...

  • Wind Noise Caused by Roof Rack Mounted on 2013 Honda Civic
  • When equipment is installed on the roof of a vehicle, wind noise will occur. It is unavoidable, but you can do certain things to minimize the noise. The round bars used with the Yakima rack system you mentioned can be quieted to some degree by using a fairing like part # Y07049. Keep in mind, the fairing will help streamline the rack itself, but whatever is placed on the crossbars like a cargo basket, box or ski rack will cause further turbulence and therefore noise. Keep in mind that
    view full answer...

  • Roof Rack Options for 2013 Hyundai Santa Fe With Panoramic Sun Roof
  • You are correct that the discontinued Rola Roof Rack # 59765 was a fit for your 2013 Hyundai Santa Fe with panoramic sunroof. The other Rola rack you referenced, # 59790, is not a fit for your 2013 Santa Fe. Our contact at Rola advised that they have a replacement for the discontinued rack, part # 59779, which will fit the Santa Fe with a naked roof. We do also have other options for you and these will vary depending on which specific version of the Santa Fe you have; Hyundai offered
    view full answer...

  • Roof Rack and Kayak Carrier Recommendation for a 2012 Ford Focus.
  • We carry many roof rack and kayak carrier options for your 2012 Ford Focus. The roof rack that I would recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the Q5 Q Clips, # Y00605, the Q83 Q Clips, # Y00683, and the Q Tower Feet, # Y00124. This will provide you with two crossbars to mount your kayak or kayak carrier to. I have attached a link to all of the roof rack options that will fit your vehicle for you to check out. You can mount your kayak
    view full answer...

  • Will the Yakima Q Tower Roof Rack Support an Extension Ladder on a 2013 Scion xB
  • You can carry an extension ladder on your 2013 Scion xB with the Yakima Q Tower Roof Rack, but there are a few factors you will want to take into consideration. Once this roof rack is installed, you will have a crossbar spread of 45 inches. The crossbar spread is the distance from the center of the front crossbar to the center of the rear crossbar. The most important factor to consider is the weight of the ladder. The Yakima Q-Tower crossbars have a weight capacity of 165 lbs, however,
    view full answer...

  • Roof Rack Recommendation for a 2013 Jeep Wrangler Unlimited
  • We have a few different roof rack options for your 2013 Jeep Wrangler Unlimited. Two roof racks that I recommend looking at is the Yakima round bar roof rack or the Thule square bar roof rack systems for hardtops. It appears that your Jeep has a hardtop in the photo you provided. The Yakima roof rack consists of the following: 58 inch round crossbars # Y00409 Yakima 1A Raingutter Towers # Y00101 The Thule roof rack consists of the following: 58 inch square crossbars # THLB58 Gutter
    view full answer...

  • Recommended Roof Rack for 2013 Wrangler 2 Door with Hard Top
  • The easiest solution would be to assemble a roof rack using the following parts from Yakima: 58 Inch Long Round Crossbars, part # Y00409 Yakima 1A Raingutter Towers, part # Y00101 Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only,
    view full answer...

  • Will 50 Inch Thule Load Bars Fit Instead of 58 Inch Yakima Cross Bars for 2010 Toyota Prius
  • I used our Fit Guide to determine which cross bars will work for your 2010 Toyota Prius. I found that the 50 inch Thule Loadbars, part # THLB50, will fit your 2010 Toyota Prius, if you do not have a glass roof. If there is a glass roof, you will need to go with the 58 inch Yakima Crossbars. Also, the 48 inch Yakima Crossbars, part # Y00408, will not fit your 2010 Toyota Prius. If your vehicle does not have the glass roof, and you decide to use the Thule Loadbars, part # THLB50, you will
    view full answer...

  • What is the Crossbar Spread for the Yakima Q Tower Roof Rack on a 2014 Dodge Grand Caravan
  • The crossbar spread for the Yakima Q Tower roof rack on your 2014 Dodge Grand Caravan is 32 inches. For a complete Q Tower roof rack for your vehicle, you will need the 58 inch round crossbars, # Y00409, the Q Tower Feet, # Y00124, and 2 of the Q57 Q Clips, # Y00657. Your RocketBox 16 cargo box requires a crossbar spread of 30 inches to 36 inches, so this roof rack will work well for you. The crossbar spread for the Thule Rapid Traverse roof rack is shorter at 27-1/2 inches, so it will
    view full answer...

  • Roof Rack and Kayak Carriers for Use on 2014 Kia Sorento LX with Naked Roof
  • For your 2014 Kia Sorento LX with naked roof and without the Vista Roof feature you can use any of the roof rack systems shown on the link provided. Options include good basic racks like the cost-effective Yakima round bar system consisting of parts # Y00409, Y00699, Y00124 and ultra-quiet aerodynamic-type racks such as the Whispbar Flush Bar system made of parts # WB-S7 and # WB-K467. Generally round bar racks will offer the best compatibility with a range of different kayak carriers
    view full answer...

  • Will Yakima 48-Inch Roof Rack Crossbars Fit the 2013 Dodge Dart
  • The Yakima roof rack components that you referenced, parts # Y00409, # Y00702, # Y00606 and # Y00124, make up a complete rack system that fits the naked roof on your 2013 Dodge Dart. The crossbars in this system, part # Y00409, are 58-inches in length. Installation of this system on your vehicle is shown in the linked video. Crossbars that are 48-inches will not be long enough for your vehicle. The shortest crossbars that will work on your Dart are the 53-inch size that are part of the
    view full answer...

  • Roof Rack and Kayak Carrier Recommendations for a 2009 Buick Enclave and 2 Kayaks
  • The longest crossbars we have that will fit the Buick Enclave are in a Yakima roof rack # Y00409 for the 58 inch long bars and # Y00138 for the RailGrab feet. But you could use longer bars # Y00410 for 66 inch long bars. Just watch your head getting in and out of the vehicle! Then you could use 2 of the Yakima EvenKeel kayak carrier, # Y04052. The 66 inch long bars should be plenty long enough for this set up. Be sure to consult the vehicle owners manual and/or Buick for the roof
    view full answer...

  • Suitcase Mounting Options on a 2009 Ford Taurus X sel with Roof Rack
  • There are many different ways to attach your suitcase to the roof rack on your 2009 Ford Taurus X sel, but you will have to have crossbars that run perpendicular to the side rails. If you do not have crossbars, then I recommend getting the Yakima RailGrab Roof Rack. This roof rack uses the RailGrab Towers, # Y00138, that attach to the side rails on your roof and hold the round crossbars, # Y00409. This is also our most economical roof rack system designed for your vehicle. I have attached
    view full answer...

  • Weight Bearing Ability of Yakima Rain Gutter Roof Rack on 2014 Jeep Wrangler Unlimited
  • Because the rain gutters on the Wrangler Unlimited aren't very strong, Yakima states that a roof rack constructed of their # Y00101 Towers and the # Y00409 58 inch crossbars cannot handle the weight of anything other than a ski/snowboard carrier like the # Y03081 PowderHound, which can handle 4 pairs of skis or 2 snowboards. A larger size is also available, part # Y03082 which can handle up to 6 pairs of skis or 4 boards. A cargo box would be too heavy, and would likely allow enough air
    view full answer...

  • Roof Rack and Kayak Carrier for a 2014 Jeep Wrangler Unlimited Hard Top
  • The gutter mount roof racks such as the Yakima system are not likely to hurt the hard top roof on your 2014 Jeep Wrangler Unlimited. The rain gutter area where the feet install is the strongest part of the roof so no worries! Yakima indicates that with their rack you can only carry skis and snowboards. So I recommend the Thule roof rack using gutter feet # TH300 and load bars # THLB58. Then you can use a kayak carrier such as a the Hull-A-Port Pro, # TH835PRO. I have linked videos on
    view full answer...

  • Recommendation for Roof Rack 2014 Honda Odyssey with Naked Roof
  • A 2014 Honda Odyssey with a naked roof is a rarity. The vast majority of those vans came with factory installed rails. Although there isn't a custom fit rack available, we can still get a roof rack on your Odyssey. I recommend going with the Yakima 54 Inch Tracks, # Y01127, or the 60 Inch Tracks, # Y01135 for your Odyssey. You will want to measure the roof of your Odyssey to see which size will work best for you. This track permanently mounts to your vehicle with PlusNut hardware. There
    view full answer...

  • Can Thule Cargo Boxes Fit Yakima Round Cross Bars
  • Yes, Thule roof cargo boxes will attach to round Yakima crossbars. It looks like you have a 2011 Toyota Prius with the Yakima roof rack that consists of # Y00409, # Y00699, # Y00605, and # Y00124. For a smaller cargo box that would fit this rack I would recommend the Thule Force part # TH624. I attached a review video that shows this box being demoed on a similar Prius as yours.
    view full answer...

  • Will Thule Roof Rack For Ford C-Max Work On 2014 Dodge CV Tradesman
  • The roof rack we offer that is confirmed as a fit for the 2014 Dodge CV Tradesman, is the Yakima Q Tower Roof Rack. To order this roof rack you will need part # Y00409, part # Y00657, and part # Y00124. I have attached an installation video for this roof rack you can check out. The vehicle may be different but the installation would be similar. The roof rack you referenced is not a fit for the 2014 Tradesman.
    view full answer...

  • Can a 2008 Honda Odyssey Carry a Kayak and a Canoe at the Same Time
  • The ability to carry a canoe and a kayak on the roof of a 2008 Honda Odyssey is going to depend on two factors. It will depend on the weight capacity of the roof and the size of the canoe and kayak. Most aftermarket roof racks, like the Yakima Q Tower or RailGrab Roof Racks for the Honda Odyssey have a weight capacity ranging from 150 lbs to 165 lbs, however the weight capacity of the vehicle roof is typically lower. I recommend checking your owners manual to verify the actual weight
    view full answer...

  • Using Longer Than Recommended 58 Inch Yakima # Y00409 Crossbars on 2009 Kia Optima
  • As long at the crossbars you use aren't wider than the widest part of the vehicle, which could be a safety problem, you could certainly use the 58 inch crossbars instead of the 48 inch ones. According to my research, the 2009 Optima is about 71 inches wide at it's widest point. Using a 58 inch crossbar would be just fine. The rack capacity is 100 lbs, but keep in mind you might be limited by the actual capacity of the roof, if it's less. Your owner's manual or Kia dealer should be able
    view full answer...

  • Roof Rack Recommendation for a 2013 Kia Soul With a Naked Roof
  • You definitely have a lot of options that are substantially less than what your husband was quoted to have a quality roof rack for your 2013 Kia Soul with a naked roof. The first roof rack system I would recommend would be the Thule Square Load Bar System # THLB50. These square bars can hold just about any roof top accessory on the market and are made in the USA, and are constructed of galvanized steel. I have attached a brief video of this system on a 2013 Kia Soul. If you would
    view full answer...

  • Yakima Roof Rack for a 2004 Ford Mustang GT
  • We have not installed a Yakima roof rack on a 2004 Ford Mustang, but Yakima has. I included a pictured showing the rack installed. Bascially what will happen is that when the clips and feet are properly tightened down the clips will pull up and out of the way of glass window. The parts needed to install a Yakima roof rack are: Crossbars # Y00409 Q56 Clips, # Y00656 Q50 Clips, # Y00650 Q Towers, # Y00124 And if you wanted more space between the crossbars use the stretch kit # Y00134.
    view full answer...

  • Should the Yakima Bolt TopLoader, # Y08005, Be Mounted through the Roof or Sidewall of a Trailer
  • You should mount the TopLoader, # Y08005 and Q Towers, # Y00124 through the single-wall areas on the top (roof) and not the sidewall according to the Yakima instructions for the Bolt-On Top Loader. I have included a link to a video installation of a Yakima roof rack system below.
    view full answer...

  • Will Yakima Q Towers Roof Rack Feet and Load Bars Fit on a 2010 Jayco J Series Pop Up Camper
  • Yes, you can use the Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4), # Y00124, on top of your 2010 Jayco pop up camper. First, you will need Bolt-On TopLoader Mounting Brackets for Yakima 1A Raingutter Towers, Q Towers, # Y08005, so you can mount the towers. These are sold in pairs so you will need two sets to install all four towers. You would then just need to add load bars depending on how wide your camper is. I have included a link to our Yakima load bar main page below.
    view full answer...

  • Does the Yakima Q Tower Roof Rack for 2014 Dodge Grand Caravan Include Locks
  • The Yakima Q Tower Roof Rack for the 2014 Dodge Grand Caravan consists of parts # Y00409, # Y00657 and # Y00124. This round crossbar system does not include the lock cores needed to secure it to your Grand Caravan but these are available as separate items. We offer the Same Key System (SKS) lock cores in various quantities: 4-pieces as part # Y07204 (enough for the rack itself) but also in a 6-piece set as part # Y07206 (enough for the rack plus some Yakima accessories). This system
    view full answer...

  • What Roof Rack Fits a 2008 Ford Ranger XLT 2-Door Supercab
  • The roof rack I recommend for your 2008 Ford Ranger XLT 2-Door Supercab is the Yakima system consisting of parts # Y00409, # Y00625, # Y00124 and # Y00134. This kit includes 58-inch round crossbars, Q-Towers, Q-25 Clips and the stretch kit to allow wider placement of the crossbars to help fit larger loads. Also, the round crossbars included in this rack offer the widest possible compatibility with accessory items. This Yakima system is intended specifically for the Ranger 2-door Super
    view full answer...

  • Complete Custom Fit Roof Rack System and Kayak Carrier for a 2004 Volkswagen New Beetle
  • The racks available for your 2004 Beetle have been tested on the actual vehicle they are made for. That is how the companies determine that they will fit. Everything you will need to install a roof rack on your 2002 V-dub New Beetle is included in the Yakima complete roof rack system (itemized below). You would then be able to add a kayak carrier like the Yakima HullRaiser J-Style Roof Mounted Kayak Carrier, # Y04039. For the Yakima kit you will need a total of 2 sets of Q123 Q Clips,
    view full answer...

  • Roof Rack Recommendation for a 2015 Toyota Prius
  • Yakima has a roof rack confirmed to fit your 2015 Toyota Prius without a sunroof. For that you would want the following components. Yakima Q Towers part # Y00124 Q99 Clips part # Y00699 Q5 Q Clip part # Y00605 44 inch Fairing # Y07048
    view full answer...

  • Availability of a Roof Rack for a 2009 Jayco Series 1006 Trailer
  • If your 2009 Jayco trailer has a fiberglass roof, you can first install Yakima tracks like # Y01135 (60 inches long), # Y01127 (54 inches long), or # Y01126 (42 inches long). Then, you can add LandingPad 1 for Yakima Control Towers, # Y00221, and Control Towers, # Y00214. You would then add Yakima crossbars of the width you need, like the 86 inch long bars, # Y00420. The cross bars are 58 inches wide and the tracks are 42 inches long. You will need to measure your trailer to make sure
    view full answer...

  • Roof Rack Recommendation for a 2002 Ford Windstar
  • To install tracks in the grooves on the roof of your Windstar you will have to have a custom installation done. I checked with my contacts at Thule and Yakima and they do not offer a custom fit track for your vehicle at this time. Yakima has a system, if your 2002 Windstar has the dual sliding doors, that will provide crossbars for carrying cargo or bikes on the top of the vehicle. To install this system you will need 3 parts. Yakima Q Towers item # Y00124 Round 58" CrossBars for
    view full answer...

  • Parts Needed to Add a Yakima Roof Rack to a 2014 Audi A4
  • The Q Clips for a Yakima roof rack are vehicle specific so they are not included with the Q Towers, # Y00124. For your 2014 Audi A4 you will need 48 inch bars # Y00408, 2 sets of Q5 Q Clips, # Y00605, and the Q Towers # Y00124.
    view full answer...

  • Fitting Of The Yakima Q Towers Roof Rack Feet, # Y00124, On A 2000 Mercury Mystique
  • On the Yakima Q Towers Roof Rack Feet, # Y00124, for the 2000 Mercury Mystique there is a footnote in the instructions. It says placement of the clips for this vehicle requires pulling a portion of the interior weather seal off from the door frame. Place the clips over the exposed steel ledge. Replace weather seal by pushing over clip and ledge. I have a picture of how to attach the clips under the weather seal. I will send the picture in a separate email. That might be what is
    view full answer...

  • Roof Rack Components For 2008 Honda Accord
  • We do sell the roof rack components for the Yakima system that will fit your 2008 Honda Accord with a naked roof. Just for information this system is designed to use crossbars that are 58 inches long. You will need to order 3 different numbers to complete the roof rack system. You will need part # Y00702, part # Y00665, and part # Y00124. This will give you the custom clips that attach to the doorframe of your Accord and the feet that the crossbars are attached to. To cut down on
    view full answer...

  • 2010 Camaro Roof Rack Recommendation for Carrying Kayaks
  • The correct roof rack for your 2010 Chevy Camaro consists of the Yakima Cross Bars # Y00409, Q-towers # Y00678, and the Q-Clips # Y0124. This roof rack will mount directly to your vehicle door frame and doos not require drilling for installation. If you would like locks for this roof rack you can use the Yakima Same Key System (SKS) # Y07202. With the above Yakima Roof rack system mentioned above your cross bar spread (distance from the center of one cross bar to the center of the other
    view full answer...

  • Recommendation for Bolt on Roof Rack System for 2008 Ford Ranger
  • Rhino Rack offers the RT-Style Roof Rack Track that would mount directly to the roof of your 2008 Ford Ranger with pop rivets. You will need a rivet gun to install this track so if you do not have one already, you could purchase one from a local hardware or auto parts store. We offer the # RTS507 which is our shortest RT track and it measures 43-1/2 inches long. These tracks are offered in different lengths and can be cut if necessary. You will want to measure the roof of your Ranger
    view full answer...

  • Yakima Roof Rack Towers Needed for a 2011 Volkswagen Golf 3 Door Hatchback
  • Your 2011 Volkswagen Golf uses the Yakima Q Tower roof rack, so you will want the Q Tower roof rack feet, # Y00124, a set of the Q96 Q Clips, # Y00696, and a set of the Q102 Q Clips, # Y00702. I have attached links to each of these parts below where you can see the cost of each item. The Q Tower feet come in a set of 4 and the Q clips come in sets of two. You will not need to order multiple quantities of these items.
    view full answer...

  • Will Roof Rack Feet from a 2008 Honda Civic Install on a 2012 Honda CR-V
  • If the feet that you are referring to are the feet of a roof rack, then they may be compatible with your 2012 Honda CR-V, but it will depend on the brand of the feet. If the roof rack feet that you have are the Yakima Q Tower feet like part # Y00124, then yes, you can use those on your CR-V. To complete the roof rack, you will also need two round crossbars, # Y00409, and the Q99 Q Clips, # Y00699 (QTY 2). If the feet that you have are a different brand, let me know or feel free
    view full answer...

  • Roof Rack Recommendation for a 2000 Saturn L Series
  • You would need 2 sets of Q54 Q Clips for Yakima Q Towers, part # Y00654. Then you could use the Round 48 inch CrossBars, part # Y00408, as well as the Yakima Q Towers Roof Rack Feet, part # Y00124, from your 1997 Ford Escort Wagon and you would have all you need for a roof rack on your 2000 Saturn L Series. I attached a link to a video below that shows a Yakima rack being installed on a very similar Saturn L-Series as yours.
    view full answer...

  • Yakima Roof Rack Recommendation for a 2009 Pontiac Montana SV6
  • Yes, the Yakima Q Towers # Y00124 that you referenced would be a component for a roof rack that is confirmed to fit your 2009 Pontiac Montana SV6. To complete the roof rack you would need the following components as well: Round 48 inch Cross Bars # Y00408 A quantity of (2) Q Clips # Y00729 I attached an install video and installation instructions for this product for you to check out also.
    view full answer...

  • Kayak Carriers for a Yakima Roof Rack on a 2010 Chevy Camaro
  • I do have a solution for you but none of the Yakima kayak carriers will work with the roof rack on your 2010 Chevy Camaro. The issue is that the crossbar spread (center to center distance from one bar to the other) is only 20 inches. You would need at least 24 inches. You can't change the position of the bars on the roof since the parts are contoured to match the roof line. What you would have to do is use foam blocks # SR5525, one set for each kayak. And there will need to be enough
    view full answer...

  • How Does the Yakima Roof Rack Attach to the Roof of 2000 Acura TL
  • The Yakima Q Tower roof rack includes clips that grab the vehicle roof at the top of the door jambs. I have provided you a diagram captured from the installation instructions which shows how the rack attaches to the vehicle. I have also attached a video on a newer 2012 Acura TL to give you a good idea of what to expect. To order a complete Yakima Q Tower roof rack for your 2000 Acura TL, you will want the Yakima Round Crossbars, # Y00408, the Q92 Q Clips, # Y00692, the Q93 Q Clips, #
    view full answer...

Info for these parts were:


Photos by:
Jackie C

Video Edited:
Zack K

Written by:
Tyler C

Test Fit:
Patrick B

Expert Research:
Jameson C

Video Edited:
Jacob T

Video Edited:
Kathleen M

Photos by:
Sam P

Expert Research:
Robert G

Expert Research:
John H

Video by:
Patrick B

Expert Research:
Lori W

Expert Research:
Michael L

Expert Research:
Michael H

Expert Research:
Reno H

Video Edited:
Joshua S

Expert Research:
Adam R

Video Edited:
Dustin K

Test Fit:
Sabrina B

Expert Research:
Jeffrey L

Video Edited:
Sue W

Test Fit:
Randy B

Video Edited:
Chris R

Expert Research:
Jeff D

Test Fit:
Rick A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Customer Reviews

Q5 Q Clips for Yakima Q Towers (QTY 2) - Y00605

Average Customer Rating:  4.7 out of 5 stars   (7 Customer Reviews)

Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.


- Y00605

by: kelly10/06/2013


It works great, but I hear it after 40 mph+ on my roof of my Hyundai Sonata. I drove with my kayak on my roof today for 25 miles with no movement with Yakima Hull Raiser carrier. The roof rack is easy to remove and it took me one hour by myself to put in together. It takes one minute to remove from car. 102748






- Y00605

by: Peter T.06/04/2013


The shipment was received ahead of schedule and was accurate. The assembly instructions were very clear and to the point. Somewhere, I missed that without locks, the roof rack can be removed. So, soon I will order the locks too. Still happy with this roof rack. I highly recommend e-trailer 83258






- Y00605

by: Omar09/12/2014


The Yakima Tower Roof Rack is clean and streamlined. It looks great on my Prius and was easy to install. Many thanks to the etrailer staff, particularly, Patrick B, for sending an installation video that was immeasurably helpful! 150806






- Y00605

by: Megan12/15/2010


Good customer service I had a great experience with etrailer, and would recommend doing business with them to a friend. I would do business with them again myself. 4154






- Y00605

by: Todd Reber08/15/2013


Great product mounts easy and sturdy ma de. 95237






- Y00605

by: Tim G06/25/2011


Fast delivery. Easy to assemble. Thanks ! 17934






- Y00605

by: Tim H10/05/2012


Good Product. Easy Install 56480




7
7







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com