Round 58" CrossBars for Yakima Roof Rack System (QTY 2) part number: Y00409
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Serve as backbone of your aftermarket roof-rack system
Provide stability to roof-mounted racks
Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
Fit all Yakima towers
Constructed from vinyl-coated, galvanized steel
Capacity (depending on application):
Yakima SkyBox Pro 12, PowderHound and 1 bike
2 Bikes and Yakima BasketCase
2 Kayaks on Yakima Kayak Stacker and 2 bikes
Yakima SkyBox Pro and 2 bikes
Yakima SkyBox Pro and kayak on HullRaiser
Dimensions: 1-1/8" diameter x 58" long
Steel wall: .085" thick
NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).
8000409 Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Q109 Q Clips for Yakima Q Towers (QTY 2) Qty 2 part number: Y00709
Q Clips integrate with Yakima Q Towers to provide a secure base for your aftermarket roof-rack system. Clips are vehicle specific; they are required for mounting Q Towers to your doorframe.
Work with Yakima Q Towers to form base for aftermarket roof-rack system
Required for mounting Q Towers to vehicle doorframe
Designed as vehicle-specific application
Provide base pads for bottom of Q Towers
Pads keep towers from damaging vehicle paint job
Constructed of thin, strong, stainless steel
Will not interfere with door closure
2 Kits required for most vehicles
Vehicles often require two different sets of clips for installation of Q Towers
8000709 Q109 Clips for Yakima Q Towers
Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4) part number: Y00124
For vehicles with a naked roof, Q Towers provide the base for building your own from-scratch system. Towers hold crossbars securely in place and ensure a perfect fit, with clips (sold separately) that are vehicle specific.
Provide base for rack system on vehicles without rain gutters or factory racks
Ensure perfect fit with tower and clip that move in 4 different ways (Quadruple Movement)
Attach using interchangeable, vehicle-specific Q Clips (sold separately)
Adjust to contours of vehicle with ball-and-socket mechanism
Have die-cast interior to form solid, sturdy anchor to support load
Are lockable with Same Key System (SKS) Cores (sold separately)
Cores lock crossbars to towers and towers to vehicle roof
SKS Cores can be changed out to make all your Yakima locks keyed alike
Remove and install quickly and easily following initial setup
Additional components required for complete roof-rack system
Q-Clips (sold separately) for vehicle-specific mounting
Crossbars (sold separately) to provide attachment point for accessories
SKS Cores required: 4
Height: 5-1/4" from base to top of bar
8000124 Yakima Q Towers for Roof Rack Base (QTY 4)
Video of install-yakima-q-towers-2013-chevrolet-silverado-y00409
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Q Tower Roof Rack Installation - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado we'll be test fitting the Yakima Round Bar Roof Rack System using the 58 inch crossbars, part number y00409; the Q118 Q-clips for the Yakima Q-Towers, part number y00718 and the Yakima Q-Towers Roof Rack Feet for the naked roof, part number y00124. With our roof rack assembled according to the instructions we'll begin our test fit by opening both front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this in the correct location we need to measure 11 inches from the leading edge of the windshield to the closest point on our foot pack. We'll do this measurement for both sides of the vehicle to ensure that our feet are in line with each other. Once we have our front bar in place we can use the thumb screw to tighten down our foot pack.
We'll make our way from side to side tightening a little bit at a time to make sure we don't lose our position. Once we have it snugged we can then close the cap which will finish securing our front bar. With our front bar in place we can then grab our rear bar. We'll place it onto the rear part of our roof. To make sure that we have this bar in the correct location we need to measure 32 inches from the center of our front bar to the center of our rear bar.
We'll do this measurement for both sides to ensure that our feet are in line with each other and that our bars are parallel. Once we have it in place we can repeat the same tightening process that we did with the front. That completes today's test fit for the Yakima Round Bar Roof Rack System, using part numbers y00409, y00718 and y00124 on our 2013 Chevrolet Silverado.
When equipment is installed on the roof of a vehicle, wind noise will occur. It is unavoidable, but you can do certain things to minimize the noise. The round bars used with the Yakima rack system you mentioned can be quieted to some degree by using a fairing like part # Y07049. Keep in mind, the fairing will help streamline the rack itself, but whatever is placed on the crossbars like a cargo basket, box or ski rack will cause further turbulence and therefore noise. Keep in mind that view full answer...
You are correct that the discontinued Rola Roof Rack # 59765 was a fit for your 2013 Hyundai Santa Fe with panoramic sunroof. The other Rola rack you referenced, # 59790, is not a fit for your 2013 Santa Fe.
Our contact at Rola advised that they have a replacement for the discontinued rack, part # 59779, which will fit the Santa Fe with a naked roof.
We do also have other options for you and these will vary depending on which specific version of the Santa Fe you have; Hyundai offered view full answer...
We carry many roof rack and kayak carrier options for your 2012 Ford Focus. The roof rack that I would recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the Q5 Q Clips, # Y00605, the Q83 Q Clips, # Y00683, and the Q Tower Feet, # Y00124. This will provide you with two crossbars to mount your kayak or kayak carrier to.
I have attached a link to all of the roof rack options that will fit your vehicle for you to check out.
You can mount your kayak view full answer...
You can carry an extension ladder on your 2013 Scion xB with the Yakima Q Tower Roof Rack, but there are a few factors you will want to take into consideration. Once this roof rack is installed, you will have a crossbar spread of 45 inches. The crossbar spread is the distance from the center of the front crossbar to the center of the rear crossbar.
The most important factor to consider is the weight of the ladder. The Yakima Q-Tower crossbars have a weight capacity of 165 lbs, however, view full answer...
We have a few different roof rack options for your 2013 Jeep Wrangler Unlimited. Two roof racks that I recommend looking at is the Yakima round bar roof rack or the Thule square bar roof rack systems for hardtops. It appears that your Jeep has a hardtop in the photo you provided.
The Yakima roof rack consists of the following:
58 inch round crossbars # Y00409
Yakima 1A Raingutter Towers # Y00101
The Thule roof rack consists of the following:
58 inch square crossbars # THLB58
Gutter view full answer...
The easiest solution would be to assemble a roof rack using the following parts from Yakima:
58 Inch Long Round Crossbars, part # Y00409
Yakima 1A Raingutter Towers, part # Y00101
Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only, view full answer...
The crossbar spread for the Yakima Q Tower roof rack on your 2014 Dodge Grand Caravan is 32 inches. For a complete Q Tower roof rack for your vehicle, you will need the 58 inch round crossbars, # Y00409, the Q Tower Feet, # Y00124, and 2 of the Q57 Q Clips, # Y00657. Your RocketBox 16 cargo box requires a crossbar spread of 30 inches to 36 inches, so this roof rack will work well for you.
The crossbar spread for the Thule Rapid Traverse roof rack is shorter at 27-1/2 inches, so it will view full answer...
For your 2014 Kia Sorento LX with naked roof and without the Vista Roof feature you can use any of the roof rack systems shown on the link provided. Options include good basic racks like the cost-effective Yakima round bar system consisting of parts # Y00409, Y00699, Y00124 and ultra-quiet aerodynamic-type racks such as the Whispbar Flush Bar system made of parts # WB-S7 and # WB-K467.
Generally round bar racks will offer the best compatibility with a range of different kayak carriers view full answer...
I used our Fit Guide to determine which cross bars will work for your 2010 Toyota Prius. I found that the 50 inch Thule Loadbars, part # THLB50, will fit your 2010 Toyota Prius, if you do not have a glass roof. If there is a glass roof, you will need to go with the 58 inch Yakima Crossbars. Also, the 48 inch Yakima Crossbars, part # Y00408, will not fit your 2010 Toyota Prius.
If your vehicle does not have the glass roof, and you decide to use the Thule Loadbars, part # THLB50, you will view full answer...
The longest crossbars we have that will fit the Buick Enclave are in a Yakima roof rack # Y00409 for the 58 inch long bars and # Y00138 for the RailGrab feet. But you could use longer bars # Y00410 for 66 inch long bars. Just watch your head getting in and out of the vehicle!
Then you could use 2 of the Yakima EvenKeel kayak carrier, # Y04052. The 66 inch long bars should be plenty long enough for this set up.
Be sure to consult the vehicle owners manual and/or Buick for the roof view full answer...
The Yakima roof rack components that you referenced, parts # Y00409, # Y00702, # Y00606 and # Y00124, make up a complete rack system that fits the naked roof on your 2013 Dodge Dart. The crossbars in this system, part # Y00409, are 58-inches in length. Installation of this system on your vehicle is shown in the linked video.
Crossbars that are 48-inches will not be long enough for your vehicle. The shortest crossbars that will work on your Dart are the 53-inch size that are part of the view full answer...
Because the rain gutters on the Wrangler Unlimited aren't very strong, Yakima states that a roof rack constructed of their # Y00101 Towers and the # Y00409 58 inch crossbars cannot handle the weight of anything other than a ski/snowboard carrier like the # Y03081 PowderHound, which can handle 4 pairs of skis or 2 snowboards. A larger size is also available, part # Y03082 which can handle up to 6 pairs of skis or 4 boards. A cargo box would be too heavy, and would likely allow enough air view full answer...
The gutter mount roof racks such as the Yakima system are not likely to hurt the hard top roof on your 2014 Jeep Wrangler Unlimited. The rain gutter area where the feet install is the strongest part of the roof so no worries!
Yakima indicates that with their rack you can only carry skis and snowboards. So I recommend the Thule roof rack using gutter feet # TH300 and load bars # THLB58. Then you can use a kayak carrier such as a the sTACKER # TH830. I have linked videos on the roof rack view full answer...
I spoke with my Yakima representative, who tells me that they recommend the longer 58 inch crossbar and that a 48 inch bar hasn't been tested and therefore they don't recommend using bars that short.
I've provided an install photo showing the 58 inch bar installed. As you can see, there's not much overhang. I doubt the 48 inch bar would be long enough. I don't believe you'd be able to use those shorter bars on a 2014 Focus.
I wish I had better news for you.
view full answer...
There are many different ways to attach your suitcase to the roof rack on your 2009 Ford Taurus X sel, but you will have to have crossbars that run perpendicular to the side rails. If you do not have crossbars, then I recommend getting the Yakima RailGrab Roof Rack. This roof rack uses the RailGrab Towers, # Y00138, that attach to the side rails on your roof and hold the round crossbars, # Y00409. This is also our most economical roof rack system designed for your vehicle.
I have attached view full answer...
The roof rack we offer that is confirmed as a fit for the 2014 Dodge CV Tradesman, is the Yakima Q Tower Roof Rack. To order this roof rack you will need part # Y00409, part # Y00657, and part # Y00124. I have attached an installation video for this roof rack you can check out. The vehicle may be different but the installation would be similar.
The roof rack you referenced is not a fit for the 2014 Tradesman.
view full answer...
A 2014 Honda Odyssey with a naked roof is a rarity. The vast majority of those vans came with factory installed rails. Although there isn't a custom fit rack available, we can still get a roof rack on your Odyssey.
I recommend going with the Yakima 54 Inch Tracks, # Y01127, or the 60 Inch Tracks, # Y01135 for your Odyssey. You will want to measure the roof of your Odyssey to see which size will work best for you. This track permanently mounts to your vehicle with PlusNut hardware. There view full answer...
The roof rack system I recommend for your 2013 Dodge Durango is the Yakima system which has a few components. Since you said you have the crossbars you can certainly order just the parts that would complete the roof rack system. First, since you said you have crossbars, to make sure they would work with the balance of the roof rack, you will want to measure your crossbars. For your Durango it requires the crossbars to be 58 inches long. If your crossbars are not the right length I recommend view full answer...
Yes, Thule roof cargo boxes will attach to round Yakima crossbars.
It looks like you have a 2011 Toyota Prius with the Yakima roof rack that consists of # Y00409, # Y00699, # Y00605, and # Y00124.
For a smaller cargo box that would fit this rack I would recommend the Thule Force part # TH624. I attached a review video that shows this box being demoed on a similar Prius as yours. view full answer...
All of the roof rack systems confirmed to fit your 2008 Toyota Camry have crossbars that are 58-inches or shorter. The Yakima Q Tower rack consisting of parts # Y00409, # Y00605, # Y00635 and # Y00124 uses 58-inch crossbars. Longer bars are available. The 66-inch # Y00410 can be substituted for part # Y00409, but note that these may extend out from beyond the sides of the vehicle which could pose a hazard.
You also want to confirm the actual weight of your canoes and check your Camry view full answer...
The Yakima Q Clips, # Y00709, all attach in the front door channels on the 1999 Chevrolet Silverado Ext. Cab 3dr. This leaves you with a cross bar spread of only 16 inches.
I would recommend adding the Yakima Q Stretch Kit, # Y00134, to your truck to get a 30 inch cross bar spread which will make things much more secure on the vehicle. I have attached a drawing showing how the stretch kit will work on the roof of your truck.
For the complete roof rack for your 1999 Silverado extended view full answer...
If your 2009 Jayco trailer has a fiberglass roof, you can first install Yakima tracks like # Y01135 (60 inches long), # Y01127 (54 inches long), or # Y01126 (42 inches long). Then, you can add LandingPad 1 for Yakima Control Towers, # Y00221, and Control Towers, # Y00214. You would then add Yakima crossbars of the width you need, like the 86 inch long bars, # Y00420.
The cross bars are 58 inches wide and the tracks are 42 inches long. You will need to measure your trailer to make sure view full answer...
We have not installed a Yakima roof rack on a 2004 Ford Mustang, but Yakima has. I included a pictured showing the rack installed. Bascially what will happen is that when the clips and feet are properly tightened down the clips will pull up and out of the way of glass window.
The parts needed to install a Yakima roof rack are:
Crossbars # Y00409
Q56 Clips, # Y00656
Q50 Clips, # Y00650
Q Towers, # Y00124
And if you wanted more space between the crossbars use the stretch kit # Y00134. view full answer...
You should mount the TopLoader, # Y08005 and Q Towers, # Y00124 through the single-wall areas on the top (roof) and not the sidewall according to the Yakima instructions for the Bolt-On Top Loader. I have included a link to a video installation of a Yakima roof rack system below. view full answer...
Yes, you can use the Yakima Q Towers Roof Rack Feet for Naked Roof (QTY 4), # Y00124, on top of your 2010 Jayco pop up camper. First, you will need Bolt-On TopLoader Mounting Brackets for Yakima 1A Raingutter Towers, Q Towers, # Y08005, so you can mount the towers. These are sold in pairs so you will need two sets to install all four towers.
You would then just need to add load bars depending on how wide your camper is. I have included a link to our Yakima load bar main page below. view full answer...
The roof rack I recommend for your 2008 Ford Ranger XLT 2-Door Supercab is the Yakima system consisting of parts # Y00409, # Y00625, # Y00124 and # Y00134. This kit includes 58-inch round crossbars, Q-Towers, Q-25 Clips and the stretch kit to allow wider placement of the crossbars to help fit larger loads. Also, the round crossbars included in this rack offer the widest possible compatibility with accessory items.
This Yakima system is intended specifically for the Ranger 2-door Super view full answer...
The Yakima Q Tower Roof Rack for the 2014 Dodge Grand Caravan consists of parts # Y00409, # Y00657 and # Y00124. This round crossbar system does not include the lock cores needed to secure it to your Grand Caravan but these are available as separate items.
We offer the Same Key System (SKS) lock cores in various quantities: 4-pieces as part # Y07204 (enough for the rack itself) but also in a 6-piece set as part # Y07206 (enough for the rack plus some Yakima accessories). This system view full answer...
Yakima has a roof rack confirmed to fit your 2015 Toyota Prius without a sunroof. For that you would want the following components.
Yakima Q Towers part # Y00124
Q99 Clips part # Y00699
Q5 Q Clip part # Y00605
44 inch Fairing # Y07048 view full answer...
The racks available for your 2004 Beetle have been tested on the actual vehicle they are made for. That is how the companies determine that they will fit.
Everything you will need to install a roof rack on your 2002 V-dub New Beetle is included in the Yakima complete roof rack system (itemized below). You would then be able to add a kayak carrier like the Yakima HullRaiser J-Style Roof Mounted Kayak Carrier, # Y04039.
For the Yakima kit you will need a total of 2 sets of Q123 Q Clips, view full answer...
To install tracks in the grooves on the roof of your Windstar you will have to have a custom installation done. I checked with my contacts at Thule and Yakima and they do not offer a custom fit track for your vehicle at this time.
Yakima has a system, if your 2002 Windstar has the dual sliding doors, that will provide crossbars for carrying cargo or bikes on the top of the vehicle. To install this system you will need 3 parts.
Yakima Q Towers item # Y00124
Round 58" CrossBars for view full answer...
The Q Clips for a Yakima roof rack are vehicle specific so they are not included with the Q Towers, # Y00124. For your 2014 Audi A4 you will need 48 inch bars # Y00408, 2 sets of Q5 Q Clips, # Y00605, and the Q Towers # Y00124. view full answer...
On the Yakima Q Towers Roof Rack Feet, # Y00124, for the 2000 Mercury Mystique there is a footnote in the instructions.
It says placement of the clips for this vehicle requires pulling a portion of the interior weather seal off from the door frame. Place the clips over the exposed steel ledge. Replace weather seal by pushing over clip and ledge.
I have a picture of how to attach the clips under the weather seal. I will send the picture in a separate email.
That might be what is view full answer...
We do sell the roof rack components for the Yakima system that will fit your 2008 Honda Accord with a naked roof. Just for information this system is designed to use crossbars that are 58 inches long.
You will need to order 3 different numbers to complete the roof rack system. You will need part # Y00702, part # Y00665, and part # Y00124. This will give you the custom clips that attach to the doorframe of your Accord and the feet that the crossbars are attached to.
To cut down on view full answer...
The correct roof rack for your 2010 Chevy Camaro consists of the Yakima Cross Bars # Y00409, Q-towers # Y00678, and the Q-Clips # Y0124. This roof rack will mount directly to your vehicle door frame and doos not require drilling for installation. If you would like locks for this roof rack you can use the Yakima Same Key System (SKS) # Y07202.
With the above Yakima Roof rack system mentioned above your cross bar spread (distance from the center of one cross bar to the center of the other view full answer...
If the feet that you are referring to are the feet of a roof rack, then they may be compatible with your 2012 Honda CR-V, but it will depend on the brand of the feet.
If the roof rack feet that you have are the Yakima Q Tower feet like part # Y00124, then yes, you can use those on your CR-V. To complete the roof rack, you will also need two round crossbars, # Y00409, and the Q99 Q Clips, # Y00699 (QTY 2).
If the feet that you have are a different brand, let me know or feel free view full answer...
Your 2011 Volkswagen Golf uses the Yakima Q Tower roof rack, so you will want the Q Tower roof rack feet, # Y00124, a set of the Q96 Q Clips, # Y00696, and a set of the Q102 Q Clips, # Y00702.
I have attached links to each of these parts below where you can see the cost of each item. The Q Tower feet come in a set of 4 and the Q clips come in sets of two. You will not need to order multiple quantities of these items. view full answer...
Rhino Rack offers the RT-Style Roof Rack Track that would mount directly to the roof of your 2008 Ford Ranger with pop rivets. You will need a rivet gun to install this track so if you do not have one already, you could purchase one from a local hardware or auto parts store.
We offer the # RTS507 which is our shortest RT track and it measures 43-1/2 inches long. These tracks are offered in different lengths and can be cut if necessary. You will want to measure the roof of your Ranger view full answer...
You would need 2 sets of Q54 Q Clips for Yakima Q Towers, part # Y00654.
Then you could use the Round 48 inch CrossBars, part # Y00408, as well as the Yakima Q Towers Roof Rack Feet, part # Y00124, from your 1997 Ford Escort Wagon and you would have all you need for a roof rack on your 2000 Saturn L Series.
I attached a link to a video below that shows a Yakima rack being installed on a very similar Saturn L-Series as yours. view full answer...
Yes, the Yakima Q Towers # Y00124 that you referenced would be a component for a roof rack that is confirmed to fit your 2009 Pontiac Montana SV6.
To complete the roof rack you would need the following components as well:
Round 48 inch Cross Bars # Y00408
A quantity of (2) Q Clips # Y00729
I attached an install video and installation instructions for this product for you to check out also.
view full answer...
The Yakima Q Tower roof rack includes clips that grab the vehicle roof at the top of the door jambs. I have provided you a diagram captured from the installation instructions which shows how the rack attaches to the vehicle. I have also attached a video on a newer 2012 Acura TL to give you a good idea of what to expect.
To order a complete Yakima Q Tower roof rack for your 2000 Acura TL, you will want the Yakima Round Crossbars, # Y00408, the Q92 Q Clips, # Y00692, the Q93 Q Clips, # view full answer...
I do have a solution for you but none of the Yakima kayak carriers will work with the roof rack on your 2010 Chevy Camaro. The issue is that the crossbar spread (center to center distance from one bar to the other) is only 20 inches. You would need at least 24 inches. You can't change the position of the bars on the roof since the parts are contoured to match the roof line.
What you would have to do is use foam blocks # SR5525, one set for each kayak. And there will need to be enough view full answer...
Fit to this rack on your 2005 Silverado by Chevrolet
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Round 58" CrossBars for Yakima Roof Rack System (QTY 2) - Y00409
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
Do you have a video to see how it looks while you install that rail track roof device.
comment by: Teodoro G - 08/25/2013
We have quite a few videos of Yakima roof rack installations. Is there a vehicle in particular you are looking for?
Patrick B - 8/26/2013
by: Joe C12/30/2012
The only reason I am not giving it an excellent rating is the considerable wind noise that occurs. While we had our luggage carrier atop our car it seemingly imperceptible, however after driving around for a week while on vacation with simply the bars breaking the wind it was quite loud. With that being said they were a breeze to install, aside from having to use allen tool tighten down the fittings. I later discovered that a wratcheting screwdriver with the correct bit size provided for much faster installation and removal. I would definitely recommend for purchase.
by: Paul D.08/19/2012
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
I ordered the Yakima Roof System for my Honda Element. I had amazingly fast delivery. Product exactly as advertised and the cost was lower than most other dealers. etrailer went the extra mile to get me my order as fast as possible (I didn't ask for quick delivery they just went ahead and took the initiative) and kept me well informed about its progress. I'd do business with them again in a heartbeat.
by: Sean M.06/30/2012
Etrailer is great with price and service. They upgraded my shipping for free and they are excellent with follow up emails to make sure I'm satisfied. As for the product, I am surprised with the amount of wind noise with the round Yakima bars. I previously had Barrecrafters on my Land Cruiser and didn't notice noise with them. If I knew before I would have upgraded to one of the Aero bars.
by: Dick D.07/20/2012
everything was great, got a day earlier than expected, fit fine, not to hard to install, I would recommend a helper the first time you are trying to get all the adjustments correct, 3 hands are needed at times. I worry a little about the rubber rain seal not working properly, has not been rained on yet. Using it to haul a kayak. Great price compared to local truck accessory store.
by: Rick U.07/24/2012
Thank you for the quick shipment of my new Yakima Q tower roof rack for my 2007 F150 King Ranch. Following the simple instructions it went together easily and works and looks great. The follow up after purchase has been great from etrailer and I felt like if there had been a problem they would have been there to help me through it.
by: Lang Family05/26/2012
We ordered the Yakima RailGrab Towers and Cross Bar set for our Taurus X to hold 2 kayaks and it was perfect! The instructions were clear, even added some humor which was welcome. They were shipped with the exact timeframe promised which was good as we needed them before our Memorial Day camping trip. Thank you. We will recommend to others.
by: Richard J11/22/2011
Roof rack kit worked perfectly. I tried to find out what kit I needed from the Yakima website but their fit my car function would not load. I was relieved to see that etrailer had their own kit to fit my car. I didn't have to worry that I ordered incompatible parts. Installation took less than an hour and the rack works great.
Just follow the directions and everything will workout. Took me 35 to 40 minutes but I thought I knew what I was doing without directions. Follow the measurements for our vehicle and it works perfect, just remember to order the air deflector to eliminate the wind noise. Always great service and delivery was very fast.
by: Kyle Z07/31/2013
I have included a picture of my 2008 Mitsubishi Eclipse, with the Yakima Q
System and Even-Keel Kayak saddles. I also used a stretch Kit, which I
picked up locally due to time constraints.
I'll be sure to keep you guys in mind when I am ready to get additional
parts for the system.
by: Peggy S.12/27/2010
Roof rack for Ford Explorer Bought the rack for my son for Christmas. Ordered it on Tuesday and received the correct item on Friday. He out it on his rig on Saturday! So many times I order items that do not fit. This was nice dealing with you for the first time. Thank you, Peggy
by: Michael J.07/22/2011
Clear concise instructions, easy to follow. Installed onto my 2004 Honda Pilot. No hiccups; the hardest part was reading my old tape measure in order to get things fasten down symmetrically. I highly recommend this product. Thank you Yakima and thank you etrailer.
etrailer shipped my order very quickly and the product arrived in condition. The system was relatively easy to install. You must take your time and measure multiple times for correct placement and tightening.
I ordered the Yakima base rack system for my 2011 Mazda CX-7, and it arrived in a timely manner and the product fit perfect and is top notch quality as always with Yakima. Thanks Yakima and etrailer.com
Was very pleased with the Yakima racks and installation was a snap! First time customer of etrailer and was elated with whole experience! Shipping was lighting fast too!!! Will do business again...
by: Micheal N.12/02/2011
Nice strong bars. These bars are great and worth the price. I put them on my 2004 Tahoe and they look good. Very easy to install. I would recommend to anyone looking for heavy duty crossbars.
by: Erin McAleer03/12/2012
The product came fast and as promised. The roof rack went together fairly smoothly. You can definitely hear the wind resistance from the rack, and the bars are a lot heavier than I expected.
by: Kevin J.10/27/2011
The roof rack worked wounderfully.. Assembly was sopt on with the instructions. Delevery was promp and as estimated in the tracking program .. Great shopping with you guys.. Kevin J..NY
by: kerwin t. keiffer04/04/2012
all put together and installed. had to adjust measurements a little to fit my cargo carrier. if it doesn't fly off on our way back to washington i'll be happy.
Received the product with everything intact. Instructions were easy to understand and took little time to assemble.
Soild product, I'll let you know how solid after my trip:)
Rails installed easily and without an issue! Shipping was supposed to take 3-7 days but arrived in <2 days.
For after market cargo add-ons, I won't go anywhere else!
by: Stacie Temple01/03/2011
Great Experience I know nothing about this sort of thing and your company made it so easy to find what I needed, order it, and have it delivered. Thanks.
by: Tony B.12/09/2012
When I bought the rack, I didn't realize that it was easily removable. This is exactly what I need to carry my Pirogue around on my Element.
by: Brig Harris05/15/2012
It looks great and was alreadt set up to fit my wife's Honda Pilot...
Thanks and I will follow up when I order my rack for my 2012 Civic
by: Cindy lou09/22/2012
so simple to enstall, I orderd the locks and the fairing after I put the racks on.. will share picture after the new order comes in
by: Frank P.01/07/2013
Very nice equipment for a great price. Fast shipping.
was able to track my order the whole way to Maryland.
Also easy to installe
Yakima roof rack was very easy to install and looks great!
etrailer.com was fast, efficient and very helpful!
by: Casey W.06/27/2012
The service at Etrailer was excellent and the product I ordered was top quality. Very satisfied.
The bars have not changed much over the years, but don't really need to.
Fit my Ford Freestyle, easy install, fast safe delivery. Quality product.
by: Tom B07/04/2014
Metal is too soft. The u-bolts from the cargo carrier cut into the rods
by: john wright03/12/2012
I have installed on my Prius and it fit very nicely. I am well pleased
by: William M10/31/2012
Good old Yakima. Always great quality with excellent instructions.
by: Paul M04/02/2012
Worked on my 2003 Ford Excursion no problem. Done in about 20 min.
by: CrossBars and towers06/15/2012
Great product, quick shipping, looked great and installed easily!
Great Price. the best I could Find. Very Prompt delivery.
by: Ronnie S07/02/2012
The rack fit perfect. Showed up quick. Nikki was great
by: Carissa Swilley07/13/2012
Thanks for quick deliever and good prod uct.