Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
1996 Chevrolet Suburban Roof Rack by Yakima
Roof Rack Includes:
Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
Part Numbers: Y00409, Y00138
Retail:$264.00
Price:$237.60
Shipping Special
Yakima RailGrab Roof Rack Installation - 2012 Dodge Journey - Video
Yakima RailGrab Roof Rack Installation - 2011 Dodge Journey - Video
Yakima RailGrab Roof Rack Installation - 2011 Ford Explorer - Video
Yakima RailGrab Roof Rack Installation - 2004 Ford Explorer - Video
Show all 26 videos
Yakima RailGrab Roof Rack Installation - 2011 Dodge Journey - Video
Yakima RailGrab Roof Rack Installation - 2011 Ford Explorer - Video
Yakima RailGrab Roof Rack Installation - 2004 Ford Explorer - Video
Show all 26 videos
Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00409
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Features:
- Serve as backbone of your aftermarket roof-rack system
- Provide stability to roof-mounted racks
- Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
- Fit all Yakima towers
- Constructed from vinyl-coated, galvanized steel
Specs:
- Quantity: 2
- Capacity (depending on application):
- 5 Bikes
- Yakima SkyBox Pro 12, PowderHound and 1 bike
- 2 Kayaks
- 2 Bikes and Yakima BasketCase
- 2 Kayaks on Yakima Kayak Stacker and 2 bikes
- Yakima SkyBox Pro and 2 bikes
- Yakima SkyBox Pro and kayak on HullRaiser
- Dimensions: 1-1/8" diameter x 58" long
- Steel wall: .085" thick
- Lifetime warranty
NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).
8000409 Round 58" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
part number: Y00138
For roofs with raised or flush-mounted side rails, RailGrab Towers are the ultimate solution to building your own aftermarket roof rack. Lockable towers fit factory rails of almost any size and hold your crossbars securely in place.
Features:
- Fit most raised and flush-mounted factory side rails
- Include 3 interchangeable claws to match factory rails
- Hold crossbars securely in place (sold separately)
- Have a low profile for a sleek, integrated look
- Install in seconds with included allen wrench
- Wrench stores inside each tower
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
Specs:
- Quantity: 4
- Additional components required for complete roof-rack system:
- Crossbars (sold separately) to provide attachment point for accessories
- SKS Cores required: 4
- Application: Replaces Yakima LowRider, LowRider Max and EZ Rider Towers
- Lifetime warranty
8000138 Yakima RailGrab Towers (QTY 4)
Replaces Yakima LowRider, LowRider Max and EZ Rider Towers
Video of Yakima RailGrab Roof Rack Installation - 2012 Dodge Journey
Video Transcript for Yakima RailGrab Roof Rack Installation - 2012 Dodge Journey
Today on a 2012 Dodge Journey, were going to do a test fit of the Yakima Roof Rack System. Well be using a Yakima RailGrab Towers and the 48-inch slide crossbars part numbers Y00408, Y00138.Ok, were gonna start off our install with our roof rack already assembled according to instructions. Well start off by placing the first crossbar onto to our factory roof rack then well go ahead and make sure theyre square with the factory roof rack. To make sure theyre square, were gonna measure from the edge thats on the factory roof rack to the leading edge of the railgrab. For this test fit, were gonna use a measurement of 10 inches. Ok, well take a second and make sure that the railgrab is tight against the factory roof rack and that the crossbar is even on both sides.Alright, well go ahead and repeat the same process for our second crossbar.
However, were gonna measure from the center of the first one to the center of the second one to square them both up. In this case, well be using a measurement of 27 inches.Now we go ahead and tighten the Yakima Roof Rack to the factory roof rack. Now, there are two screws inside the railgrab. Theres a silver one that tightens the railgrab to the crossbar and theres a black screw that tightens the railgrab to the factory roof rack. Now, its a good idea to tighten the black screw first because it will move around as you tighten it down.And those are the steps to install our Yakima Roof Rack.
Now well give you one more measurement of the added height to the factory roof rack. And that measurement will be 2 inches.And with that, thatll will finish it with our test fit of the Yakima Roof Rack System on our 2012 Dodge Journey.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Will 50 Inch Thule Load Bars Fit Instead of 58 Inch Yakima Cross Bars for 2010 Toyota Prius
- I used our Fit Guide to determine which cross bars will work for your 2010 Toyota Prius. I found that the 50 inch Thule Loadbars, part # THLB50, will fit your 2010 Toyota Prius, if you do not have a glass roof. If there is a glass roof, you will need to go with the 58 inch Yakima Crossbars. Also, the 48 inch Yakima Crossbars, part # Y00408, will not fit your 2010 Toyota Prius.
If your vehicle does not have the glass roof, and you decide to use the Thule Loadbars, part # THLB50, you will need
view full answer... - Suitcase Mounting Options on a 2009 Ford Taurus X sel with Roof Rack
- There are many different ways to attach your suitcase to the roof rack on your 2009 Ford Taurus X sel, but you will have to have crossbars that run perpendicular to the side rails. If you do not have crossbars, then I recommend getting the Yakima RailGrab Roof Rack. This roof rack uses the RailGrab Towers, # Y00138, that attach to the side rails on your roof and hold the round crossbars, # Y00409. This is also our most economical roof rack system designed for your vehicle.
I have attached an
view full answer... - Roof Rack and Kayak Carrier Recommendation for a 2012 Ford Focus.
- We carry many roof rack and kayak carrier options for your 2012 Ford Focus. The roof rack that I would recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the Q5 Q Clips, # Y00605, the Q83 Q Clips, # Y00683, and the Q Tower Feet, # Y00124. This will provide you with two crossbars to mount your kayak or kayak carrier to.
I have attached a link to all of the roof rack options that will fit your vehicle for you to check out.
You can mount your kayak dire
view full answer... - 2006 Suzuki Grand Vitara Roof Rack Rail Grab Towers and Cross Bar Recomendation
- Yes, the Yakima RailGrab Towers for Flat and Raised Side Rails, item # Y00138, will work on the factory rack on your 2006 Suzuki Grand Vitara. Along with the RailGrab towers you will need the Round 48 inch CrossBars for Yakima Roof Rack System, item # Y00408, to complete the system.
view full answer... - Roof Rack Recommendation for a 2010 GMC Acadia with Factory Rails
- Yes, you would need a Yakima Roof Rack for 2010 GMC Acadia, part # Y00409, Y00138. This will give you a set of cross bars that will mount onto your current roof rails that run from front to back.
I attached a link to a review video that will help explain how it installs and operates.
view full answer... - Will Yakima Railgrab Towers # Y00138 Fit 2008 Saturn Vue and 2004 Honda Odyssey with Factory Rails
- The Yakima RailGrab towers, part # Y00138, combined with the Yakima Round 48 Inch CrossBars, part # Y00408, will work on the 2008 Saturn Vue with factory side rails and the 2004 Honda Odyssey with factory side rails.
I am including a link to a video review on the Yakima RailGrab Towers.
view full answer... - How Much of a Roof Rack Crossbar is Covered Up by the Yakima RailGrabs
- I went out to the warehouse and pulled some Yakima RailGrabs, # Y00138, to measure the area that covers the crossbars for you. I got a measurement of 4-1/2 inches where the bar will be covered by the RailGrab and either end for a total of 8-1/2 inches.
If your intended application cannot straddle the RailGrabs, longer bars would not help because the space between the 2 RailGrabs will not change, just the amount that is coming out the other end away from the vehicle.
view full answer... - Are Longer Cross Bars Available for Use with the Yakima Rail Grab Towers on a 2011 Hyundai Santa Fe
- For installation of longer cross bars on your 2011 Hyundai Santa Fe with factory side rails you will need a set of Yakima RailGrab Towers, # Y00138 and a set of longer cross bars.
Yakima offers longer cross bars in 66 inch, # Y00410, 78 inch, # Y00411, and 86 inch, # Y00420.
Keep in mind that the weight limit for the roof of the 2011 Santa Fe is 165 lbs, and you should not exceed this weight, which includes the roof rack, Kayak, cargo box and all of the contents. You should also be aware t
view full answer... - Yakima Rail Grab Towers Recommendation for a 2001 Chevy Suburban
- The Yakima RailGrab Towers # Y00138 that you referenced would be the correct system for attaching a roof rack on your 2001 Chevy Suburban if it does not have cross bars that run from one side of the roof to the other.
If you got a Yakima Round Bar # Y00408 along with the # Y00138 you would have a complete roof rack system for your vehicle if it has raised side rails that run from front to back.
If your vehicle has cross bars already you would not necessarily need towers.
I attached inst
view full answer... - Will Yakima RailGrabs Work on a 2012 Toyota Tacoma 4 Door Double Cab
- I checked with Yakima and as long as your 2012 Toyota Tacoma is a 4 door double cab model and you have the factory raised side rails on the truck, see attached photo, the Yakima RailGrab Towers, # Y00138, will work for you. You will need to use the small claws for installation on the side rails.
You would need to add a set of 58 inch cross bars, # Y00409, to complete the system and the maximum allowable weight load is 100 lbs for the 2012 Toyota Tacoma 4 door double cab with factory side rail
view full answer... - Compatible Roof Rack Towers for a 2012 Chevrolet Traverse
- I spoke with my contact at Yakima and we definitely have a solution for you. He said the Yakima RailGrab Towers, part # Y00138, will not work with your 2012 Chevrolet Traverse. Instead, you will want to use the Yakima Q Towers Roof Rack Feet, part # Y00124, with Q132 Q Clips, part # Y00732. The Q Tower roof rack feet do not use the factory rails installed on your vehicle, but mount directly to the vehicle just above the doors. The roof rack feet are compatible with round Yakima bars and provide
view full answer... - Will Yakima RailGrab Towers Fit a 2010 Ford Expedition
- If your 2010 Ford Expedition has the side rails that run front to back on the roof of the vehicle, you can use the Yakima RailGrabs, # Y00138, and Yakima recommends 48 inch crossbars, # Y00408. I have included some installation instructions and a video showing a typical installation for you.
view full answer... - Will the Yakima RailGrab Roof Rack Support 2 Bikes and a Cargo Bag on a 2006 Honda Pilot
- The Yakima RailGrab Roof Rack which includes the RailGrab Towers, # Y00138, and the 58 inch Round Crossbars, # Y00409, is an excellent option to carry a cargo bag and two bike racks on your 2006 Honda Pilot.
I would recommend the Yakima Raptor Roof Bike Rack, # Y02085, and a rooftop cargo bag like the Yakima GetOut Roof Cargo Bag, # Y07187. Yakima states that their 58 inch crossbars will be able to accommodate two bike racks and a cargo box or bag up to 36 inches wide.
I have attached two
view full answer... - Roof Rack Cross Bars and Cargo Bag Recommendation for a 2005 Pontiac Montana with Factory Side Rails
- Yes, the Yakima RailGrab Towers, # Y00138, are designed to fit your 2005 Pontiac Montana SV6 with factory installed raised rails that run front to back. I have had the opportunity to install these towers and Yakima CrossBars, # Y00408, several times and they are very secure. I attached a video installation for you to review.
For a cargo bag, I recommend using the BasketCase Cargo Carrier, # Y07012, along with the GetOut Pro Weather-Resistant Rooftop Cargo Bag, # Y07188. The basket will keep t
view full answer... - Roof Rack Recommendation to Carry Ladders on a 2010 Ford Escape with Factory Side Rails
- If your 2010 Ford Escape is a hybrid, XLT, or XLS model I recommend a Rhino-rack system, # SXB3. The Aero bars can be fitted with load stops, like # S602 (sold in a 2-pack), and ladder slides, # SEGLK2B (sold with 2 for each bar), to help secure your ladder and make it easier to load and unload.
If you have a Limited model Escape, use # SXB4 for a roof rack. The same load stops and ladder slides will work with this system as well. I have included links to a couple of videos of each roof rack
view full answer... - Will Yakima LowRiders Roof Rack Feet Fit a 2000 Jeep Cherokee
- From what I could find, the 2000 Jeep Cherokee was available with 1 of 3 roof options. First, it could have a plain roof with no rack. Second, it could have a roof rack that includes crossbars that run side to side. And third, it could have tracks that run front to back.
If your Cherokee has the tracks that run front to back, the Yakima LowRiders will not fit. If you have the factory roof rack, you will need the following parts to install additional Yakima crossbars:
One set of crossbars,
view full answer... - Do the Yakima RailGrabs Fit a 2007 Suzuki XL7 Luxury Edition
- Provided that your 2007 Suzuki XL7 has the factory side rails that run front to back, you can use the Yakima RailGrabs, # Y00138. You will also need crossbars, # Y00408. I have incldued a link to a video featuring this system for you. You will not need any additional parts to add crossbars to the vehicle.
view full answer... - Will Yakima RailGrab Roof rack Towers Fit a 2012 Jeep Grand Cherokee Altitude Edition
- I spoke with my contact at Yakima and he stated that the RailGrabs, # Y00138, will fit the 2012 Jeep Grand Cherokee Altitude Edition with flush rails. You will also need crossbars # Y00408. And finally, you will need Claws with Pin Adapters, # Y8880201, to install the RailGrabs to the flush rails. My contact stated that in this adapter and for your Jeep you would not need the pin part of the adapter, just the upper part.
view full answer... - Dimensions of the Yakima RailGrab Towers, # Y00138
- The top part of the Yakima RailGrab, # Y00138, tower, where the bar slides through, is 4-1/4 inches. This is the part that covers up the bar. The height from the top part the covers the bar down to where it grabs the rail is 2-1/4 inches. And the overall width at the underneath part that holds the bar is 3-1/8 inches. I have included a picture that shows these dimensions for you.
view full answer... - 2012 Jeep Grand Cherokee Altitude w/ flush rails
- I am going to send you a set of instructions for the Claws with Pin Adapters # Y8880201 in a separate email that will describe how to install this product on the flush rails of your 2012 Jeep Grand Cherokee.
view full answer... - How to Install the Yakima RailGrab Roof Rack on a 2009 Subaru Outback
- Based on my research, you will want to use the medium claws to attach the RailGrab towers to the side rails on your 2009 Subaru Outback. If the small claws are currently on the towers, then that would explain why they are not making good contact with your side rails. I recommend using the medium claws to see how they fit.
It does not matter if you tighten the silver allen bolts first or the black allen bolts. If it is easier for you to tighten the towers to the side rails before you center t
view full answer... - Yakima Roof Rack Options for 2011 Jeep Liberty
- For your 2011 Jeep Liberty, there are shorter roof rack options than the Yakima Roof Rack # Y00138 you referenced. I recommend the Yakima Whispbar Roof Rack # WB-S17 that comes with the Factory Side Rail Fit Kit # WB-K328. The length of these crossbars are 52-3/4 inches with usable crossbar space of 51-1/4 inches. This rack, along with the one you mentioned, are compatible with vehicles that come with factory-installed rails that run front to back.
After speaking to my contact at Yakima, I ha
view full answer...
Yakima Carriers
Fit to this rack on your 1996 Chevrolet Suburban
