Select Your Vehicle

View Cart


2002 Toyota Highlander Roof Rack by Yakima

Roof Rack Includes:

Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)


Yakima

Part Numbers: Y00408,Y00138

Retail:$284.00

Price:$283.90

$227.10 after
Up to 20 Percent Off Select Yakima Products

Shipping Special





Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00408

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Features:

  • Serve as backbone of your aftermarket roof-rack system
  • Provide stability to roof-mounted racks
  • Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
  • Fit all Yakima towers
  • Constructed from vinyl-coated, galvanized steel


Specs:

  • Quantity: 2
  • Capacity (depending on application):
    • 4 Bikes
    • Yakima BasketCase and PowderHound
    • 2 Bikes and a kayak
    • 2 Bikes and Big PowderHound
    • 2 Bikes and SkyBox Pro 12
    • Canoe and a bike
    • SkyBox Pro and a bike
  • Dimensions: 1-1/8" diameter x 48" long
  • Steel wall: .085" thick
  • Lifetime warranty


NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).



8000408 Round 48" CrossBars for Yakima Roof Rack System (QTY 2)



Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4)
part number: Y00138

For roofs with raised or flush-mounted side rails, RailGrab Towers are the ultimate solution to building your own aftermarket roof rack. Lockable towers fit factory rails of almost any size and hold your crossbars securely in place.

Features:

  • Fit most raised and flush-mounted factory side rails
    • Include 3 interchangeable claws to match factory rails
  • Hold crossbars securely in place (sold separately)
  • Have a low profile for a sleek, integrated look
  • Install in seconds with included allen wrench
    • Wrench stores inside each tower
  • Are lockable with Same Key System (SKS) Cores (sold separately)
    • Cores lock crossbars to towers and towers to vehicle roof
    • SKS Cores can be changed out to make all your Yakima locks keyed alike


Specs:

  • Quantity: 4
  • Additional components required for complete roof-rack system:
    • Crossbars (sold separately) to provide attachment point for accessories
  • SKS Cores required: 4
  • Application: Replaces Yakima LowRider, LowRider Max and EZ Rider Towers
  • Lifetime warranty
Side of Yakima RailGrab Tower claw in the largest rail settingSide of Yakima RailGrab Tower claw in the smallest rail setting
Yakima RailGrab Tower claw in the largest rail settingYakima RailGrab Tower claw in the smallest rail setting

8000138 Yakima RailGrab Towers (QTY 4)
Replaces Yakima LowRider, LowRider Max and EZ Rider Towers





Video of Round 48" CrossBars for Yakima Roof Rack System (QTY 2)


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Yakima Q Tower Roof Rack System Review

Today we are going to cover the typical components of a Yakima roof-rack system. We will start from the bottom and work our way up. On the bottom part are the actual pieces that are going to make actual contact with the vehicle, and those parts are referred to as Q Clips, part number Y0605. They actually adapt the rack to the car itself. And this is a set of the Towers right here, part number Y00124. These go from the roofline to the crossbars. And the Q Towers are lockable, so no one can take them off your vehicle. They do come with the cases for the locks themselves. These do not have the key lock inside them you do have to add the cores to them yourself. And that is part of Yakimas SKS System. And then the last part is the crossbars themselves, part number Y0408. And these bars come in various lengths, designed for specific applications. What we will do now is go ahead and assemble these components and actually install them on a typical application. In this case, we are actually going to install this on a 2005 Volkswagen Jetta.

We have the components for one corner of the rack system to give you an idea of how they go together. First off, we are going to open up the latch here, and there is a little adjustment screw right here. It actually fine-tines your adjustment to snug down the brackets to your car. And when you have them tight enough, you just close them to latch into place. We will go ahead and take out this screw and install the Fit Kit first. What happens here is that this Fit Kit part will fit on the bottom side here, and these corners - these corners right here - will actually fit into these slots. It is kind of a press fit, so you have to push pretty hard to get it in there. All right, once you get the corners started in there, then just push it together. And you can see how it fits into the corners here. And the next thing to do is to get it lined up with the keyhole here so we can attach the lock holder itself. And it is keyed, so it can go in only one way. And when you have it installed, put your clip in there that holds it in place. Now we can go ahead and reinstall this back into our Tower. And you do not have to go all the way in, maybe halfway, because you will have to go back and adjust both sides evenly when you install it on the vehicle. Now we will put our pad in for the Fit Kit, and the pad simply snaps into place. And that takes care of the Tower, and we only have three more to go.

When they come from the factory, the clamp for the bar itself is compressed, so you need to take the clamp loose so you can slide it on the bar. What you want to do is, this little plastic cover here, you want to pull that back out to get to the little assembly screw right here. And you have just got to undo it with the included Allen key. And then you just want to loosen it up a little bit and then push that tab down so you have a nice, round circle on the inside. This is the part that actually gets clamped up against the crossbar so it does not go anywhere. And then install our endcap. Repeat the same procedure for the other side of this bar and for the other bar, too. And then this rack will be ready to install on our vehicle. Now the instructions that come with the kit and the Fit Kit will tell you exactly where to mount these on the vehicle. So you actually snug this up, then the bar here actually snugs it down to the roofline. And you may have to adjust it a little bit left and right and on the threads of the center bolt to make sure you latch it on tight. All right, and then just repeat the same process for the rear crossbar. And with that, your roof rack is ready to add your accessory to it.



Customer Reviews

Round 48" CrossBars for Yakima Roof Rack System (QTY 2) - Y00408

Average Customer Rating:  4.8 out of 5 stars   (47 Customer Reviews)

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.


- Y00408

by: Rob02/29/2012


The installation of this rack system went very well, all of the instructions were easy to read and use. I have attached some pictures of our installation. The vehicle is a 1994 Honda Accord EX four door sedan 32789



- Y00408

by: Travis08/23/2013


I've attachec a few pictures of the Yakima rack on my Audi Q7. It took a few attempts to find the right combination of attachments, but in the end, the pin attachments work best with the access points on the factory flush-mount rails. Great product!!!!! 96520



- Y00408

by: Debbie S.06/22/2012


I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise. 45299



- Y00408

by: SDW07/21/2012


I ordered the Yakima RailGrab Kit with 48" round bars and the Gunwale Canoe Carrier Brackets on the advice of friends who have used a Yakima rack for years. I want to carry a canoe on my Subaru Forester, equipped with factory flush mounted rack, but needed something wider to hold my canoe, which is 38.5" at its center. This system is just the thing. It installs easily and the towers fit my the contours of my factory siderails perfectly. The Gunwale Brackets adjust with a twist-knob to snug up to the canoe for a secure fit. Once they're adjusted to the correct width, loading the canoe is easy-ever-after. Note: the endcaps are included in the RailGrab package, as are two cam straps, so you don't need to buy these. At $300 for everything, etrailer has a great price, and the order was on my porch in less than a week. Emails to customer service were answered promptly, and a follow-up email to ask about my experience prompted me to write this very enthusiastic review. Thanks! 48762



- Y00408

by: Tom V09/29/2012


Roof Rack 2008 Saturn Astra The roof rack arrived one day early...The packaging was excellent and the quality of the product more than met my expectations. The instructions made the insulation very easy. It took less than 45 minutes to install the unit complete. 56141



- Y00408

by: Chris R.09/19/2011


Roof rack on my 2005 Chevy Uplander. Also ordered the Q towers and fairing. 24235



- Y00408

by: Ron P.07/12/2011


We got a Yakima Roof Rack system with locks and fairing for a "lime squeeze metallic" (Green...) 2011 Ford Fiesta 5dr Hatchback. Received the package yesterday and set it up within about an hour. 19256



- Y00408

by: Maggie07/23/2015


It arrived on time and was pretty easy to put on my car. (Glad it was a wagon and not a high-roofed SUV!). The directions couldn't be any clearer. I had trouble with one bolt "catching" but my daughter gave the piece a little more oomph and it caught. I like that it had words in addition to drawings. So many companies take the easy way out and just use pictures/drawings with arrows. Not so helpful. All of that praise aside, I haven't hit the road with my kayak yet. Tomorrow will tell. 213871



- Y00408

by: Wayne G.05/10/2012


My Explorer, love the service, from order to install in 3 days 39804



- Y00408

by: steve Z06/16/2012


roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :) 44421



- Y00408

by: Richard E.06/28/2012


Received product on Wednesday after placing the order Monday morning. Very impressed with the prompt shipment and delivery. I was able to mount the rack system in about 30 minutes. The instructions were excellent and the system was very easy to install. Looks great on my 2011 BMW! This is the 3rd or 4th time I have ordered products from e-trailer and I have been impressed every time. Keep up the great work! 45988



- Y00408

by: Magda09/05/2015


We are so happy with etrailer. The product is high quality and it arrived one day before the expected day of delivery! Their customer services is exceptional - real people who know their stuff first hand. The installation was easy and is a prefect match for our Yakima Sky Box. We took the car to Zion National Park as shown on the photo taken at the Watchman Campground! 224207



- Y00408

by: Robert P.12/23/2010


Yakima Roof Rack for BMW I recently purchased this product as part of the yakima roof rack system for my BMW and received everything needed for assembly in a very short amount of time even during the mad rush of Christmas shopping. I also received emails notifying me of the status of the shipping as well as a courtesy email. I highly recommend using etrailer.com! 4536



- Y00408

by: Shandela B.04/28/2012


Love the product. It was very easy to install and the instructions were quite clear. Etrailer did a great job with communication and the shipping was fast. I shopped online for quite some time and did plenty of comparisons and it was definitely the cheapest price. I am extremely happy! If I need anything again I will definitely shop here! 38657



- Y00408

by: Maggie07/23/2015


It arrived on time and was easy to attach to the car clamps. Although I didn't see it in the instructions, I used a rubber mallet to insert the end caps. I had another (more expensive) system that had flexible caps that went OVER the ends of the bars. It was long before they fell off. 213873



- Y00408

by: rcmbiker12/05/2012


The product is fine (I have had so many different Yakima racks it hurts) but I was more impressed with etrailer.com. Your price was competitive and the timeliness of the online order was impeccable. I wish more on line stores offered the same quality service. thanks again. 60688



- Y00408

by: Michael M10/08/2011


Free Shipping. Was supposed to be 5-6 days but they upgraded us for free and it arrived within 2. Product works just as advertised, easy to install on our 2011 Subaru Forester. Etrailer had excellent reveiews so we ordered from them. They didn't disappoint! 25282



- Y00408

by: Sean K.08/28/2012


Good product, on the highway I noticed I had rattling noise and pulled over and I figured out it was the round bars so I ordered the wind deflector as well, other then that easy to assemble and very happy with this procuct 53340



- Y00408

by: Sean K.08/28/2012


Good product, on the highway I noticed I had rattling noise and pulled over and I figured out it was the round bars so I ordered the wind deflector as well, other then that easy to assemble and very happy with this procuct 53339



- Y00408

by: Peter W.07/15/2011


The 48" CrossBars do not fit on a 2010 BMW 5 series GT! They have to be 58". Check before putting the end caps on the bars. Otherwise, there is nothing exciting about this product. It works. 19472



- Y00408

by: Arthur R.06/25/2012


Excellent communication from the time the order was placed until it was received. Prompt shipping once the item was located in the warehouse; received in two days! Excellent! 45564



- Y00408

by: Justin08/07/2014


Great product, seems really solid. Love the flexibility of different attachments for different types of transportation situations. Super quick delivery from etrailer! 144876



- Y00408

by: Don K03/30/2012


At first, I thought it wasn't the right product for my Equinox. After looking at other vehicles it was correct. It took no time at all to install 35613



- Y00408

by: Ted K.03/31/2012


Excellent product. Very easy to install. Excellent customer service as well. eTrailer very much has the sales and service piece dialed in. 35758



- Y00408

by: Tom F06/24/2014


Very strong thick walled tubing. Good stuff in and of themselves. Don't recommend using with Railgrab tower/Bowdown combination. 137466



- Y00408

by: Dennis A07/27/2012


Very good craftsmanship, easy to fit and I'm pleased with the product. Very solid construction and good coating protection. Thanks 49531



- Y00408

by: Will K.07/16/2012


Fit my Nissan Juke perfectly. etrailer.com has been great - the best customer service I've encountered in quite some time! 48051



- Y00408

by: Wes F.08/21/2013


I have a 90 Honda Civic Hatch and the Yakima rack system is great(Q Towers, clips, bars and fairing. No problems so far. 96221



- Y00408

by: sheila c.07/05/2011


Clear instructions made it easy to install on my 2011 Chevy Equinox. It's a solid, secure product and I'm very pleased. 18500



- Y00408

by: Kim M.04/03/2012


Love it! And, the same size bars are compatible with my boyfriend's car, which makes it even easier! Great versatility. 35988



- Y00408

by: Dave E.05/21/2013


Bars appear strong and sturdy. Easy to install with my Yakima RailGrab towers. Fast delivery 81366



- Y00408

by: Don D.12/13/2010


Cross Bars Solid great looking cross bar, simple to install love the finished look on the car. 4053



- Y00408

by: Zach09/24/2011


I've used these now for several months. Worked great on a trip across several states. 24506



- Y00408

by: Jeff B.09/04/2012


Easy to install, strong construction, and worked great with our canvas carrier! 53849



- Y00408

by: PB07/13/2011


Very simple to install. Good quality product. Will recommend. 19334



- Y00408

by: Kirk01/19/2012


Great product! Glad I chose this company and products ;] 29984



- Y00408

by: Ray H.03/17/2011


Solid product, easy to install. I would highly recommend 9596



- Y00408

by: Charlie Decker06/10/2011


I'm satisfied with product, quality, price. Thank you 16669



- Y00408

by: Mike P04/23/2011


Excellent buy. I would highly recommend this product. 12270



- Y00408

by: dave07/18/2012


super easy install and delivered in 1 d ay 48400



- Y00408

by: Robert P04/04/2012


Excellent quality and looks very good. 36114



- Y00408

by: Joel N.05/27/2011


So far so good! Cant beat the price! 15546



- Y00408

by: Dave M.07/12/2011


Quick shipping, great products. 19217



- Y00408

by: M.C.11/12/2015


Strong, but noisy on my car 231850



- Y00408

by: Mike C03/14/2012


Great product & service 33833



- Y00408

by: cetin y07/27/2012


great service 49539



- Y00408

by: Rich Doe10/11/2011


Good stuff!! 25439

62
62


Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?


  • Roof Rack Recommendation for a 2016 Kia Sorento with Flush Rails no Sunroof
  • The Yakima Roof Rack that consists of part numbers # Y00408 and # Y00138-Y8880201 has been confirmed as a fit for your 2016 Kia Sorento that has factory flush rails and no sunroof.
    view full answer...

  • Crossbar Spread Recommendation for a Yakima Roof Rack on a 2015 Subaru Forester
  • The recommended crossbar spread for the Yakima Roof Rack that consists of # Y00408 and # Y00138 on the 2015 Subaru Forester that is in the video you referenced is 44-1/2 inches. But since this roof rack is getting installed on raised side rails you can adjust them forward and back as you see fit. Typically the further forward the bars are installed on a vehicle the more noise they will make. I attached the link to the video you referenced to the right for you to check out as well.
    view full answer...

  • Roof Rack Recommendation for a 2016 Kia Sorento with Flush Rails
  • For your 2016 Kia Sorento with factory flush rails you would want the Yakima roof rack that consists of part numbers # Y00408, and # Y00138-Y8880201
    view full answer...

  • Which Claw is Used to Mount the Yakima RailGrab Tower # Y00138 on a 2013 Toyota 4Runner SR5
  • According to my contact at Yakima, you will want to use the small claws when mounting the Yakima RailGrab Towers, # Y00138, to your 2013 Toyota 4Runner SR5.
    view full answer...

  • Roof Rack Recommendation for a 2005 Subaru Impreza RS
  • You can add an aftermarket roof rack to your 2005 Subaru Impreza RS, but we will need to know if you have a sedan model with a naked roof or a wagon model with factory installed side rails to recommend the correct roof rack for your vehicle. I have attached a link to all of the roof rack options that we offer for your vehicle. Simply choose your style of roof and a list of all compatible roof racks will populate. If you have a sedan model with a naked roof, then I would recommend looking
    view full answer...

  • Roof Rack and Kayak Carrier Recommendations for a 2012 Subaru Outback Wagon with Factory Side Rails
  • I checked with Yakima and the RailGrab towers, # Y00138, will fit the raised side rails on a 2012 Subaru Outback Wagon. Yakima does also recommend the 48 inch bars for this system, # Y00408, that you have referenced. I have included some informational links on this system for you to view. For a kayak carrier, I recommend the Yakima BowDown, # Y04042. This carrier will provide a safe method for carrying the kayak while protecting the kayak and the vehicle. To make loading easier, I recommend
    view full answer...

  • What is the Capacity of Yakima 48 Inch Roof Rack Crossbars
  • The 48 inch Yakima crossbars, # Y00408, have a weight capacity of 165 pounds no matter which mounting system you are using. Different applications have different ratings though. It sounds like you are not using the system on a vehicle roof. Whatever you are using it for, if you can determine the capacity of the mounting surface that will be beneficial as you do not want to exceed it. Always go by the lowest rating.
    view full answer...

  • Roof Rack, Cargo Box, and Bike Rack Recommendation for a 2012 Audi A4 Wagon
  • If your 2012 Audi A4 wagon has the factory installed flush mounted side rails, then I recommend going with the Yakima RailGrab Roof Rack, which consists of the 48 inch round crossbars, # Y00408, and the RailGrab Towers, # Y00138-Y8880201. This roof rack will have a lower profile over the Thule roof racks and the round crossbars are compatible with almost any roof mounted accessory. This is also a quality roof rack at an economical price. According to Yakima, this roof rack has the ability
    view full answer...

  • Roof Rack Recommendation for a 2014 Jeep Cherokee Panoramic Sunroof
  • For your 2014 Jeep Cherokee with raised rails that run from front to back you would want the Thule AeroBlade Edge Roof Rack # TH7501-TH7502. This will work great for you and is also compatible with your panoramic sunroof. The Aeroblade bars are the quietest on the market and will also affect your gas mileage the least. Check out the install video I attached for this rack on a similar vehicle.
    view full answer...

  • How to Carry A Canoe with a 2008 Toyota Corolla
  • I may have an option that will work for you, however, I do not recommend carrying the canoe on the bare roof of your 2008 Toyota Corolla. Most vehicles cannot handle more than 50 lbs directly on top of the roof. Instead, I would recommend adding a roof rack like the Yakima Q Tower Roof Rack which consists of the following parts. 48 Inch Round Crossbars # Y00408 Q99 Q Clips # Y00699 Q31 Q Clips # Y00631 Q Tower Foot Pack # Y00124 Yakima states that this roof rack can support
    view full answer...

  • Recommendation For Carrying 3 Kayaks On 2003 Honda Odyssey With Factory Side Rails
  • The first thing you will want to do is consult your owners manual or with your dealership to make sure you do not exceed the roof weight capacity for your 2003 Honda Odyssey. The weight of 3 kayaks would probably be more than the weight capacity of any of the roof racks we offer for your Odyssey. If you are okay with a system for 2 kayaks I recommend the Yakima Railgrab Roof Rack System. This system features round 48 inch crossbars that have a weight capacity of 100 lbs, which should
    view full answer...

  • Roof Rack, Cargo Basket and Spare Tire Carrier Recommendation for a 2014 Subaru Forester
  • We have what you need. First you will need to start with a roof rack for that I recommend going with the Rhino Rack roof rack system, which includes the following parts: Rhino-Rack Vortex Aero Crossbars # RRVA118S-2 Rhino-Rack SX Series Leg Kit # RRSX005. Then you will want to get a roof mounted cargo basket for the spare tire to set in. For that I would recommend the Yakima LoadWarrior Roof Rack Cargo Basket # Y07070. Now to secure the wheel into the basket you would want the Spare
    view full answer...

  • Will Yakima RailGrab Roof Rack # Y00408 # Y00138 Fit 2012 Acura TSX Wagon
  • The Yakima RailGrab Roof Rack System consisting of parts # Y00408 and # Y00138 will indeed fit your 2012 Acura TSX wagon that is fitted with front-to-back roof side rails. I have linked an install video for your review. This roof rack uses round crossbars that provide excellent compatibility with a broad range of roof-mount accessories, including bike, kayak and cargo carriers. You can use the link provided to see all roof-mount bike carriers that will fit these round crossbars. You
    view full answer...

  • Can 58 Inch Yakima CrossBars # Y00408 Be Substituted in the Roof Rack Kit for a 1999 Toyota Rav4
  • You can use the longer, 58" Yakima cross bars # Y00409 on your 1999 Toyota Rav4, but you will need to be conscious of the additional length that will be coming off either side of your vehicle roof. We do not offer the longer cross bars in a package and cannot make substitutions, so you would need to place an order for all the items individually. You would need two of the Q Clips # Y00632 and the # Y00124 roof rack feet in addition to the 58" bars. You can view additional information
    view full answer...

  • Roof Rack Recommendation for a 2015 Mini Cooper
  • For your 2015 Mini Cooper the Yakima Roof Rack that you referenced that consists of part numbers # Y00408, # Y00124, and # Y00728 has been confirmed as a fit and would work well.
    view full answer...

  • Would the Yakima Skybox 16 fit a 2005 Infiniti FX35 without Hatch Interference
  • The Yakima SkyBox Pro 16s Rooftop Cargo Box # Y07196 requires at least 50 inches from the center of the front crossbar of the roof rack it is installed onto to the nearest portion of the hatch when opened. In order to determine if you would have the clearance to use this box on the roof of your vehicle you need to measure from the furthest point forward on the siderails that the Railgrab part # Y00138 could attach to of your roof to the rear hatch when opened. If that distance is greater
    view full answer...

  • Will the Yakima Q Tower Roof Rack Fit a 30 Inch x 30 Inch Cargo Bag on a 2003 Toyota Tacoma
  • The part numbers that you referenced complete the Yakima Q Tower roof rack for the Regular Cab and Xtra Cab Toyota Tacomas. According to Yakima, the crossbar spread of the Q Tower roof rack on your 2003 Toyota Tacoma Extended(Xtra) Cab is 34 inches. The crossbar spread is measured from the center of the front crossbar to the center of the rear crossbar. You should have no problem fitting your 30 inch x 30 inch cargo bag between the crossbar and the Stretch Kit side bars on the roof
    view full answer...

  • Roof Rack Recommendation for a 2015 Nissan Altima
  • We have roof racks available for the 2015 Nissan Altima, but at this time we don't have any from Thule. For a similar roof rack you would want to go with the Yakima that consists of part numbers # Y00408, # Y00727, # Y00606, # Y00124. I attached an install video for you to check out as well.
    view full answer...

  • 2016 Mazda CX5 Yakima Roof Rack Recommendation
  • For your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) Yakima Control Towers # Y00214 LandingPad 11 for Yakima Control Towers # Y00233
    view full answer...

  • 16 Cubic Foot Cargo Box by Yakima Recommendation for a 2016 Kia Sorento SX
  • I checked with Yakima and the Yakima SkyBox 16 Rooftop Cargo Box # Y00408 has been confirmed as a fit for your 2016 Kia Sorento's factory crossbars so it would fit and work well. This box has 16 cubic feet of storage space so we would recommend it for you.
    view full answer...

  • Roof Rack Crossbars for a 2013 Ford Flex with Factory Side Rails
  • We have a few options for crossbars for a 2013 Ford Flex with factory side rails that run front to back. I have included a link to them for you. Since you came from a Yakima product the Yakima rack that fits is comprised of 58 inch crossbars, # Y00409, and RailGrab towers, # Y00138, that you referenced. I have included a link showing a typical installation on a similar vehicle. Be sure to consult the vehicle owners manual for the weight carrying capacity of the side rails and roof.
    view full answer...

  • Yakima Roof Rack for a 2013 Subaru Outback with Factory Side Rails
  • I checked with Yakima and for a 2013 Subaru Outback Wagon with factory side rails that run front to back you will need to use the RailGrabs, # Y00138, with the small claws. You need to have 48 inch long crossbars (or longer but 48 inches is the recommended length), # Y00408. If the bars you have are shorter then you will need new bars. I have included a link to the instructions and a link to a video showing a typical installation on a similar vehicle.
    view full answer...

  • What is the Maximum Diameter Side Rail That The Yakima Railgrab Towers # Y001348 Will Attach To
  • The Yakima RailGrab Towers # Y00138 that you referenced comes with a long arm that can possibly fit around your tubes on your 2011 GMC Sierra in the picture. Through the following process I found that the maximum diameter that the RailGrab Towers will fit is just under 2-1/2 inches. In the picture attached I put the longer arm on the RailGrab Tower and put it on my Xterra. The diameter of the bars on my roof are 2-1/4 inches and the circumference is 7 inches. I still had about 3/16
    view full answer...

  • Will Yakima RailGrab Roof rack Towers Fit a 2012 Jeep Grand Cherokee Altitude Edition
  • I spoke with my contact at Yakima and he stated that the RailGrabs, # Y00138, will fit the 2012 Jeep Grand Cherokee Altitude Edition with flush rails. You will also need crossbars # Y00408. And finally, you will need Claws with Pin Adapters, # Y8880201, to install the RailGrabs to the flush rails. My contact stated that in this adapter and for your Jeep you would not need the pin part of the adapter, just the upper part.
    view full answer...

  • What Yakima Roof Rack System Will Fit 2012 Jeep Grand Cherokee Altitude with Flush Siderails
  • Thank you for submitting the photo of your Grand Cherokee roof line and flush side rails. My contact at Yakima confirmed that there is one roof rack option for your 2012 Grand Cherokee Altitude. The rack that will work with your flush side rails is the Q-Tower System, which can be seen using the link provided. This roof rack system consists of parts # Y00409, # Y00610, # Y00605 and # Y00124. It uses 58-inch black vinyl-coated round crossbars that are compatible with a range of rooftop
    view full answer...

  • How to Install the Yakima RailGrab Roof Rack on a 2009 Subaru Outback
  • Based on my research, you will want to use the medium claws to attach the RailGrab towers to the side rails on your 2009 Subaru Outback. If the small claws are currently on the towers, then that would explain why they are not making good contact with your side rails. I recommend using the medium claws to see how they fit. It does not matter if you tighten the silver allen bolts first or the black allen bolts. If it is easier for you to tighten the towers to the side rails before you
    view full answer...

  • Crossbar Recommendation for a 2011 Hyundai Santa Fe with Factory Side Rails
  • For a 2011 Hyundai Santa Fe with factory side rails that run front to back, you can use Yakima RailGrab Towers for Flat and Raised Side Rails (QTY 4), # Y00138, with Round 58 Inch CrossBars for Yakima Roof Rack System (QTY 2), # Y00409. The RailGrabs grip the side rails and the provide a place for the cross bars to mount to. I have included a link to a video review of the RailGraps for reference. Current pricing is available on the product pages.
    view full answer...

  • Will Yakima RailGrabs Work on a 2012 Toyota Tacoma 4 Door Double Cab
  • I checked with Yakima and as long as your 2012 Toyota Tacoma is a 4 door double cab model and you have the factory raised side rails on the truck, see attached photo, the Yakima RailGrab Towers, # Y00138, will work for you. You will need to use the small claws for installation on the side rails. You would need to add a set of 58 inch cross bars, # Y00409, to complete the system and the maximum allowable weight load is 100 lbs for the 2012 Toyota Tacoma 4 door double cab with factory
    view full answer...

  • Roof Rack Recommendation for a 2010 GMC Acadia with Factory Rails
  • Yes, you would need a Yakima Roof Rack for 2010 GMC Acadia, part # Y00409, Y00138. This will give you a set of cross bars that will mount onto your current roof rails that run from front to back. I attached a link to a review video that will help explain how it installs and operates.
    view full answer...

  • Roof Rack Recommendation to Carry Ladders on a 2010 Ford Escape Limited with Factory Side Rails
  • For your 2010 Ford Escape Limited I recommend a Rhino-rack system, # RRVA126B-2 and # RRSX001. The Aero bars can be fitted with load stops, like # S602 (sold in a 2-pack), and ladder slides, # SEGLK2B (sold with 2 for each bar), to help secure your ladder and make it easier to load and unload.
    view full answer...

  • Dimensions of the Yakima RailGrab Towers, # Y00138
  • The top part of the Yakima RailGrab, # Y00138, tower, where the bar slides through, is 4-1/4 inches. This is the part that covers up the bar. The height from the top part the covers the bar down to where it grabs the rail is 2-1/4 inches. And the overall width at the underneath part that holds the bar is 3-1/8 inches. I have included a picture that shows these dimensions for you.
    view full answer...

  • Can a Yakima Roof Rack Attach to Gobi Stealth Rack
  • Although it hasn't been officially tested I did some digging online and found several people who were able to use the medium clamp of a Yakima RailGrab # Y00138 to attach to a Gobi Stealth Rack which uses 1 inch bars. This would then allow you to install your 58 inch crossbars # Y00409.
    view full answer...

  • 2006 Suzuki Grand Vitara Roof Rack Rail Grab Towers and Cross Bar Recomendation
  • Yes, the Yakima RailGrab Towers for Flat and Raised Side Rails, item # Y00138, will work on the factory rack on your 2006 Suzuki Grand Vitara. Along with the RailGrab towers you will need the Round 48 inch CrossBars for Yakima Roof Rack System, item # Y00408, to complete the system.
    view full answer...

  • Roof Rack Recommendations for a 2014 Subaru Forester with Side Rails
  • The Yakima RailGrabs towers, # Y00138, are a fit for the raised side rails on your 2014 Subaru Forester. All of the round Yakima crossbars will fit the towers but you need some that are at least long enough to span the width of the roof and reach the towers. The recommended length for your vehicle is 48 inches, # Y00408. This system is rated for a maximum of 150 pounds. But you will need to consult the vehicle owners manual or Subaru to determine the weight capacity of the roof and/or
    view full answer...

  • Will Yakima LowRiders Roof Rack Feet Fit a 2000 Jeep Cherokee
  • From what I could find, the 2000 Jeep Cherokee was available with 1 of 3 roof options. First, it could have a plain roof with no rack. Second, it could have a roof rack that includes crossbars that run side to side. And third, it could have tracks that run front to back. If your Cherokee has the tracks that run front to back, the Yakima LowRiders will not fit. If you have the factory roof rack, you will need the following parts to install additional Yakima crossbars: One set of crossbars,
    view full answer...

  • Will the Yakima Landing Pad 12 Fit a 2013 Subaru Outback Wagon with Side Rails
  • For the 2013 Subaru Outback Wagon with factory side rails you can actually use Yakima RailGrab towers, # Y00138, and 48 inch crossbars, # Y00408, to add a roof rack. If you got the Landing Pad 12, # Y00236, you would then need Control Towers, # Y00214, and the crossbars. Going with the RailGrabs and bars will save you money.
    view full answer...

  • Roof Rack Cross Bars and Cargo Bag Recommendation for a 2005 Pontiac Montana with Factory Side Rails
  • Yes, the Yakima RailGrab Towers, # Y00138, are designed to fit your 2005 Pontiac Montana SV6 with factory installed raised rails that run front to back. I have had the opportunity to install these towers and Yakima CrossBars, # Y00408, several times and they are very secure. I attached a video installation for you to review. For a cargo bag, I recommend using the FarOut Pro Weather-Resistant Rooftop Cargo Bag, # Y07173. The basket will keep the bag off of your roof, eliminating the possibility
    view full answer...

  • Compatible Roof Rack Towers for a 2012 Chevrolet Traverse
  • I spoke with my contact at Yakima and we definitely have a solution for you. He said the Yakima RailGrab Towers, part # Y00138, will not work with your 2012 Chevrolet Traverse. Instead, you will want to use the Yakima Q Towers Roof Rack Feet, part # Y00124, with Q132 Q Clips, part # Y00732. The Q Tower roof rack feet do not use the factory rails installed on your vehicle, but mount directly to the vehicle just above the doors. The roof rack feet are compatible with round Yakima bars and
    view full answer...

Yakima Carriers

Fit to this rack on your 2002 Highlander by Toyota

Yakima WindShield Fairing for Roof Racks - 40" Long
Y05017
Retail: $99.00Price: $79.20

Info for these parts were:


Expert Research:
Michael L

Video Edited:
Zack K

Expert Research:
Sarah L

Written by:
Tyler C

Expert Research:
Michael H

Expert Research:
Reno H

Expert Research:
Jameson C

Video Edited:
Joshua S

Test Fit:
Nicholas E

Video Edited:
Jacob T

Test Fit:
Rick A

Expert Research:
John H

Expert Research:
Adam R

Video Edited:
Kathleen M

Expert Research:
Jeffrey L

Video Edited:
Sue W

Test Fit:
Randy B

Video Edited:
Chris R

Test Fit:
Jared G

Photos by:
Theodore B

Expert Research:
Robert G

Test Fit:
Patrick B

Expert Research:
Jeff D

Expert Research:
Brandon M

Updated by:
Laura H

Photos by:
Sam P

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Toyota Highlander Accessories








Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com