1992 Daihatsu Rocky Roof Rack by Yakima
Roof Rack Includes:
Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima 1A Raingutter Towers (QTY 4)
Part Numbers: Y00408, Y00101
Retail:$264.00
Price:$237.60
Shipping SpecialRound 48" CrossBars for Yakima Roof Rack System (QTY 2)
part number: Y00408
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Features:
- Serve as backbone of your aftermarket roof-rack system
- Provide stability to roof-mounted racks
- Carry the accessories that secure your gear (bike racks, kayak carriers, etc.)
- Fit all Yakima towers
- Constructed from vinyl-coated, galvanized steel
Specs:
- Quantity: 2
- Capacity (depending on application):
- 4 Bikes
- Yakima BasketCase and PowderHound
- 2 Bikes and a kayak
- 2 Bikes and Big PowderHound
- 2 Bikes and SkyBox Pro 12
- Canoe and a bike
- SkyBox Pro and a bike
- Dimensions: 1-1/8" diameter x 48" long
- Steel wall: .085" thick
- Lifetime warranty
NOTE: Load bars do not include end caps. The end caps are included with Yakima roof rack or ladder rack towers. Load bar end caps are also sold separately (part number Y8007026).
8000408 Round 48" CrossBars for Yakima Roof Rack System (QTY 2)
Yakima 1A Raingutter Towers (QTY 4)
part number: Y00101
For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.
Features:
- Clamp onto vehicle rain gutters
- Provide base for Yakima roof-rack crossbars
- Adjust to non-parallel rain gutters
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Constructed from tough Zytel nylon
Specs:
- Quantity: 4
- Additional components required for a complete roof-rack system:
- Crossbars (sold separately) to provide attachment point for accessories
- SKS Cores required: 4
- Height: 7-1/4"
- Can be increased by 3-1/2" by 1A HiRise Spacers (Y01101), sold separately
- Lifetime warranty
8000101 Yakima 1A Raingutter Towers (QTY 4)
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Can 58 Inch Yakima CrossBars # Y00408 Be Substituted in the Roof Rack Kit for a 1999 Toyota Rav4
- You can use the longer, 58" Yakima cross bars # Y00409 on your 1999 Toyota Rav4, but you will need to be conscious of the additional length that will be coming off either side of your vehicle roof.
We do not offer the longer cross bars in a package and cannot make substitutions, so you would need to place an order for all the items individually. You would need two of the Q Clips # Y00632 and the # Y00124 roof rack feet in addition to the 58" bars.
You can view additional information on th
view full answer... - Can I Install Yakima Roof Rack On My 2003 Volkswagen Beetle
- Yes, you will be able to install the Yakima 48 Inch Crossbars, part # Y00408, but you will need to install the complete Yakima roof rack. You will need the Yakima Q123 Q Clips, part # Y00723, the Yakima Q98 Q Clips, part # Y00698, the Yakima Q Towers, part # Y00124 and the Yakima Q Stretch Kit, part # Y00134. All the above parts will install on the bare roof of your 2003 Volkswagen Beetle.
You will want to check the owners manual of your vehicle for the load capacity of your roof as you will
view full answer... - Economical Roof Mounted Cargo Carrying Solutions for 2007 Hummer H3
- For a universal roof rack you could use # DTA968. You would need 2 of these bars. You could then mount a basket to them. A better option would be to install heavier-duty crossbars using the following parts:
Yakima 48 inch load bars, part# Y00408
Vehicle Specific Landing Pads, two sets of part # Y00224
Control Towers, part # Y00214
Once the crossbars are in place, you could install a low-priced roof basket like the Yakima BasketCase, # Y07012.
The Highland products would not be a good
view full answer... - Roof Rack and Kayak Carrier Recommendations for a 2012 Subaru Outback Wagon with Factory Side Rails
- I checked with Yakima and the RailGrab towers, # Y00138, will fit the raised side rails on a 2012 Subaru Outback Wagon. Yakima does also recommend the 48 inch bars for this system, # Y00408, that you have referenced. I have included some informational links on this system for you to view.
For a kayak carrier, I recommend the Yakima BowDown, # Y04042. This carrier will provide a safe method for carrying the kayak while protecting the kayak and the vehicle. To make loading easier, I recommend a
view full answer... - Roof Rack Recommendation for a 2005 Subaru Impreza RS
- You can add an aftermarket roof rack to your 2005 Subaru Impreza RS, but we will need to know if you have a sedan model with a naked roof or a wagon model with factory installed side rails to recommend the correct roof rack for your vehicle. I have attached a link to all of the roof rack options that we offer for your vehicle. Simply choose your style of roof and a list of all compatible roof racks will populate.
If you have a sedan model with a naked roof, then I would recommend looking at
view full answer... - Will Yakima Round 48 Inch Crossbars # Y00408 Fit My 1997 Toyota Corolla
- Yes, the Yakima Round 48 Inch Crossbars, part # Y00408, will fit your 1997 Toyota Corolla. To mount the # Y00408 Crossbars, you will need to use Yakima 1A Raingutter Towers, part # Y00101.
You will want to check the roof load carrying capacity of your Corolla as stated in the vehicle owners manual as you will not want to exceed it.
I have linked an FAQ roof racks that you may find as a good reference. Also linked are all the roof racks we have available for the 1997 Toyota Corolla.
view full answer... - Which Roof Racks Will Fit a 2004 Ford E-150 Van
- We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts:
Crossbars, # Y00410
Yakima Raingutter Towers, # Y00101
I have included a link to the installation details for the Raingutter Towers for you.
If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
view full answer... - Roof Rack System for 2008 Jeep Wrangler Unlimited with Factory Hardtop
- According to Yakima, the drip rails on that factory hard top are not structural. When used in this installation, the crossbars are intended for use with skis or snowboards only. The maximum allowable load would be 6 skis or 4 snowboards. When used within this limited scope, the drip rail mounts will not damage the rain gutter or drip rail. If used for any other purpose, they would most likely be damaged.
If you decide to install the Y00101 Raingutter Towers and 58 inch load bars, keep in min
view full answer... - What Prevents the Knobs on the Yakima 1A Raingutter Towers From Coming Loose
- Essentially, the tension that the towers # Y00101 are under are what prevents them from loosening. To prevent the knob from turning you can install lock cores, # Y07204. When locked the knob the system cannot be loosened.
view full answer...
Yakima Carriers
Fit to this rack on your 1992 Rocky by Daihatsu
