Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
2009 Chevrolet Suburban Roof Rack by Thule
Roof Rack Includes:
Thule Square Load Bars - Steel - 58" - Qty 2
Thule Crossroad Roof Mounted Roof Railing Foot Pack
Part Numbers: THLB58, TH450
Retail:$279.90
Price:$251.90
Shipping Special
Thule Crossroad Roof Rack Installation - 2010 Chevy Suburban - Video
Thule Crossroad Roof Rack Installation - 2008 Chrysler Aspen - Video
Thule Crossroad Roof Rack Installation - 2012 Dodge Journey - Video
Thule Crossroad Roof Rack Installation - 2011 Dodge Journey - Video
Show all 31 videos
Thule Crossroad Roof Rack Installation - 2008 Chrysler Aspen - Video
Thule Crossroad Roof Rack Installation - 2012 Dodge Journey - Video
Thule Crossroad Roof Rack Installation - 2011 Dodge Journey - Video
Show all 31 videos
Thule Square Load Bars - Steel - 58" - Qty 2
part number: THLB58
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Features:
- Load bars work with Thule foot packs to create a roof rack for mounting various accessories
- Mount a cargo carrier, bike rack, kayak saddles, ski carrier and more
- Racks and accessories must clamp around crossbars
- Mount a cargo carrier, bike rack, kayak saddles, ski carrier and more
- Standard, square load bars are sturdy and offer extreme support
- Crossbar length can accommodate the following, depending on the types of carriers and accessories used:
- 1 - 5 Bikes
- 1 - 2 Kayaks
- 1 - 10 Pairs of skis
- 2 - 4 Surfboards
- 1 Cargo box (with enough room to fit 2 bikes beside it)
- Plastic coating helps to prevent rust and corrosion while providing non-scratch cushion for your load
- Galvanized steel is strong and durable
Specs:
- Length: 58"
- Width: 1-1/4"
- Height: 7/8"
- Fits the following Thule foot packs:
- Crossroad (TH450)
- Aero (TH400XT)
- Tracker II (TH430)
- Low gutter feet (TH300)
- High gutter feet (TH387)
- Super-high gutter feet (TH953)
- Podium (TH460)
- Weight: 10 lbs
- Weight capacity: 165 lbs per pair
- Quantity: 2 crossbars
- Lifetime warranty
LB58 Thule Standard Square Steel Cross Bars - 58" Long
Thule Crossroad Roof Mounted Roof Railing Foot Pack
part number: TH450
Transform your vehicle's factory installed rails into flexible, multipurpose rack system with adapters. Rubber coated steel clamping straps provide maximum security and unmatched strength while protecting existing rails from surface damage.
- Features:
-
- Mounting system adjusts to clamp securely to existing raised side rails of roof rack
- Maximum rack strength and custom fit provided by rubber coated steel strap of foot
- Integrated rubber lining on bottom of foot keeps existing rails fully protected from surface damage
- Design and style of foot complement all vehicles
- Easily mount and remove feet with the integrated tool
- Optional One Key System Locks are available to secure the foot pack to the factory rails
- Requires 4 lock cylinders
- Includes 4 endcaps for load bars
- Mounting system adjusts to clamp securely to existing raised side rails of roof rack
- Specs:
-
- For use with Thule square load bars (#s THLB50, THLB58, THLB65 and THLB78).
- Also available in half pack (# TH4502).
Thule Crossroad-Roof Rack Mounting System
Turn the factory installed raised rails on your vehicle into a versatile, multipurpose rack system. The iron grip of the Crossroad, provided for by the flexible steel clamping strap, allows for unmatched strength and security when mounting carriers to the roof of your vehicle. Whether you are biking, boating, skiing, or packing up for a well-deserved weekend away, this mounting system is perfect for safely transporting whatever you need to your next destination.
Thule Crossroad adapters strap on to the factory roof rack.
The strap is tightened by turning a screw hidden behind a lockable door.
Video of Thule Crossroad Roof Rack Installation - 2010 Chevy Suburban
Video Transcript for Thule Crossroad Roof Rack Installation - 2010 Chevy Suburban
In this video we are going to show you how to install a Thule Crossroad roof rack onto a Suburban with existing side rails. We will be using the Thule Crossroad feet, part number TH450, and Thules 58 inch load bars, part number THLB58. The Crossroad pack comes with four Crossroad feet, the end caps with the built in Allen key and four smaller end caps that will go on the end of our bars. The Crossroad feet are designed to quickly and easily attach to the factory side rails on your vehicle. The band is actually a steel band coated in rubber. This gives it plenty of strength but the rubber also protects your factory side rails. It is going to loop around your side rail and connect back to the foot. Then we will use the end cap with the built in Allen head wrench to tighten down this bolt. It will tighten the whole system down to your vehicle, as well as tighten down the crossbars in the foot. 0:55
Now we are going to assemble one and get it ready to mount on our vehicle. We are going to take our crossbar and feed one of the Crossroad feet over it. Next we are going to snap our end cap. We are going to take our first crossbar assembly and mount it all of the way on the front of our side rails. Because the Crossroad system is designed to attach to vehicles with existing side rails, there are no unique measurements per vehicle. All that you have to do is make sure that your crossbar spread from the center of the front crossbar to the center of the rear crossbar is a minimum of 24 inches. We will also make sure that the crossbar overhangs the feet evenly on both sides. Once we have everything lined up, we can start tightening things down. 1:37
As we tighten the Allen bolt down, it is not only going to grab on to the side rails but it is also going to lock our crossbar into place. Now that we have the driver side foot snugged down, we are going to move to the passenger side, tighten that one all of the way down and come back and finish up with the driver side. Once it is good and tight, we will take the end cap, slide it into position and it snaps into place. We will repeat the same process for the crossbar in the rear. You can also install Thule lock cores, part number TH544. The lock cores will allow you to secure the Crossroad feet to your vehicle so that the roof rack cannot be easily removed. And that does it for our Thule Crossroad installation on our 2010 Chevrolet Suburban.
Ask the Experts about this Roof Rack
- Parts Needed to Install a Roof Rack System on the Roof and Camper Shell of a 2006 Toyota Tundra
- Since you are not adverse to drilling your vehicle roof and your camper shell I would recommend going with a Thule Podium Roof Mounted Foot Pack. You can use the square load bars, # THLB58, with the # TH460 Foot Pack or the Rapid Aero Load Bars, # THARB60, with the # TH460R Foot Pack.
To mount the foot packs to the sheet metal roof on your 2006 Toyota Tundra you will need the Thule direct mount system # THKIT3114, which does require drilling into the roof of your vehicle.
To mount the foot
view full answer... - What are the Dimensions of the Thule Square Bars
- I went out into our showroom and measured the dimensions of a set of Thule square bars like the part # THLB58 and found that they are 7/8 of an inch by 1-1/4 inches.
Check out the video I attached to see these measurements being taken.
view full answer... - Installing a Box on a 2012 Toyota Sequoia to Support a Roof Top Tent
- If you are wanting to remove the factory side rails that run front to back on your 2012 Toyota Sequoia, I do not recommend doing so. These rails were meant to be permanently installed on your vehicle and should not be removed. These rails are bolted and sealed to the roof and water could leak into the vehicle if they are removed and other damage could occur such as denting and scratching on the roof.
If you are wanting to remove the crossbars that run from side to side and attach to the side
view full answer... - Roof Rack Options for a 2011 Ford Flex
- If you have factory installed side rails that run front to back on your 2011 Ford Flex you would just need Thule Square Load Bars # THLB58 and you would have a complete roof rack system combined with the Thule Cross Road Foot Pack # TH450 that you currently have.
If you do not have factory raised side rails you will need the following items, Thule Square Load Bars # THLB58, Thule Traverse Roof-Rack Foot Pack # TH480, Thule Roof-Rack Fit Kit for Traverse Foot Packs # THKIT1518.
I attached i
view full answer... - Roof Rack Cross Bar Recommendation for a 2005 Pontiac Montana SV6 with Factory Raised Rails
- Yes, the Thule Crossroad Roof Mounted Roof Railing Foot Pack # TH450 would work well on your 2005 Pontiac Montana SV6, with factory raised rails that run front to back. Along with the raised rail foot pack you will need a set of 50 inch cross bars, # THLB50
I would recommend going with the Complete Crossroad Kit with 50 inch Long Bars and Locks, # TH45050, which includes locks to secure the bars to the side rails. We have a video installation for this item that should be helpful, see link.
view full answer...
Thule Carriers
Fit to this rack on your 2009 Chevrolet Suburban
THLB58
