Select Your Vehicle
view cartView Cart


2012 Toyota Highlander Roof Rack by Rhino Rack

Roof Rack Includes:

Rhino-Rack SXBS Roof Rack for Raised, Factory Side Rails - Sportz Crossbars - 50" Long - Black


Rhino Rack

Part Numbers: SXBS8

Retail:$319.00

Price:$287.10

Shipping Special





Rhino-Rack SXBS Roof Rack for Raised, Factory Side Rails - Sportz Crossbars - 50" Long - Black
part number: SXBS8

Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 black, 50" long Sportz crossbars; and 4 locking endcaps.

Features:

  • Adjustable roof-rack system for your vehicle with elevated, factory side rails
    • 2 Sportz black, low-profile crossbars hold bike racks, ski and kayak carriers, and other accessories
      • Oval crossbars are more aerodynamic than standard square crossbars
        • Reduces drag and cuts down on wind noise
      • Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
      • Built-in C-channel on top of each bar lets you mount Rhino-Rack Sportz and Aero accessories and carriers
        • Rubber strip in the channel helps to cushion load and provide slip resistance
          • Can be cut to accommodate track-mounted accessories and carriers
      • Built-in C-channel on bottom of each bar lets you mount crossbars to roof-rack legs
      • Locking endcaps (included) secure accessories to your crossbars
    • 4 Roof-rack legs clamp directly to your vehicle's raised, OEM side rails
      • Position anywhere along the rails to accommodate different-size loads
      • Protect your roof-rack rails with rubber pads on leg clamps
      • Constructed of UV-resistant, glass-reinforced nylon
  • Versatile leg-and-crossbar system is easy to install and remove
  • Built-in security hardware deters theft - leg bolts require special tool (included) to loosen


Specs:

  • Weight capacity: 165 lbs
  • Crossbar dimensions: 50" long x 3-1/8" wide x 1-1/4" tall
  • Limited lifetime warranty


SXBS8 Rhino Rack SXBS Roof Rack for Elevated OEM Rails - With Sportz Elliptical Cross Bars - 50" Long - Black





Video of install-rhino-roof-rack-2010-toyota-highlander-sxbs8


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install rhino roof rack 2010 toyota highlander sxbs8
Rhino-Rack SXBS Roof Rack Installation - 2010 Toyota Highlander
Video install rhino rack roof rack 2012 toyota 4runner sxbs8
Rhino-Rack SXBS Roof Rack Installation - 2012 Toyota 4Runner
Video install rhino rack roof rack 2005 toyota sienna sxbs8
Rhino-Rack SXBS Roof Rack Installation - 2005 Toyota Sienna
Video install rhino roof rack 2010 mercedes benz gl sxbs8 silv
Rhino-Rack SXBS Roof Rack Installation - 2010 Mercedes-Benz GL


Video Transcript for Rhino-Rack SXBS Roof Rack Installation - 2010 Toyota Highlander

Today we have a 2010 Toyota Highlander, and we will be testing a Rhino-Rack Roof Rack system part number sxbs8. This kit has black crossbars, but it is also available with silver crossbars as part number sxbs8-silv. We already have the crossbar assemblies put together so now were ready to mount them up on the vehicle. We need to check for two things when we put the crossbar up. First we need to check that the bar is overhanging evenly on both sides of the vehicle, and we also need to make sure it is running perpendicular to our side rails. To do this we will find a fixed point on the side rail on both sides of the vehicle, and measure to the edge of the clamp system.

We will make sure that measurement is the same and then we will note that our crossbar assembly is perpendicular to our side rails. Once we have made sure that the bar is in the proper position we can begin tightening it down. Well move back and forth from the drivers side to the passengers side and tighten down the system evenly. With the front crossbar assembly tightened down were ready to move to the rear. Again we will make sure that the crossbar over hangs evenly on both the drivers side and the passengers side, but we need to make sure that the rear crossbar runs parallel to the front.

To do this we will measure from the center of the front bar to the center of the rear bar on both sides of the vehicle. When we make the measurement the same on both sides we will know that the rear bar runs parallel to the front. Now that we have the rear crossbar assembly in position, well tighten it down in the same manner that we tightened the front. With both of our crossbar assemblies tightened down, were ready to install our locking end caps. And that will finish the installation of our roof rack.

Now we will give you a quick measurement to see how much height we have added to the vehicle. From the top of the side rail to the top of our new crossbar assembly weve added about 2 inches of height, and that does it for our Rhino-Rack, roof rack test fit on our 2010 Toyota Highlander. .




Ask the Experts about this Roof Rack
Expert Answers about Roof RackDo you have a question about this Roof Rack?

Rhino Rack Carriers

Fit to this rack on your 2012 Highlander by Toyota

Info for this part was:


Photos by:
Theodore B

Written by:
Tyler C

Updated by:
DeAnne T

Video Edited:
Jacob T

Test Fit:
Matthew K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Customer Reviews

Roof Rack - SXBS8

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (1 Customer Reviews)




- SXBS8

ratingratingratingratingrating by: Mike07/25/2013

Is this review helpful?


Product is great, super easy to assemble and mount, and looks great on the truck. The only thing better then this roof rack is the customer service you get from e-trailer. Products are shipped quickly, e-mails are sent immediately, and the people are great. I give this particular product a 9 because I had to file the crossbars a little so that the locks would lock ( no big deal). And I give e-trailer a 10. Order without worry my friends, you will be glad you did.91528


Toyota Highlander Accessories


Stay Connected


Subscribe to our newsletter

Email  

privacy - we don't send unsolicited email





Only 13 Hours 30 Minutes Remaining

etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com