Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
1995 Chevrolet Blazer Roof Rack by Rhino Rack
Roof Rack Includes:
Rhino-Rack SXBS Roof Rack for Raised, Factory Side Rails - Sportz Crossbars - 50" Long - Black
Part Numbers: SXBS8
Retail:$299.00
Price:$269.10
Shipping Special
Rhino-Rack SXBS Roof Rack Installation - 2010 Toyota Highlander - Video
Rhino-Rack SXBS Roof Rack Installation - 2005 Toyota Sienna - Video
Rhino-Rack SXBS Roof Rack Installation - 2005 Toyota Sienna - Video
Rhino-Rack SXBS Roof Rack for Raised, Factory Side Rails - Sportz Crossbars - 50" Long - Black
part number: SXBS8
Quick and easy to install, this kit is great for adding an aftermarket roof-rack system to your vehicle with raised, factory side rails. Includes 4 rail-grabbing legs; 2 black, 50" long Sportz crossbars; and 4 locking endcaps.
Features:
- Adjustable roof-rack system for your vehicle with elevated, factory side rails
- 2 Sportz black, low-profile crossbars hold bike racks, ski and kayak carriers, and other accessories
- Oval crossbars are more aerodynamic than standard square crossbars
- Reduces drag and cuts down on wind noise
- Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
- Built-in C-channel on top of each bar lets you mount Rhino-Rack Sportz and Aero accessories and carriers
- Rubber strip in the channel helps to cushion load and provide slip resistance
- Can be cut to accommodate track-mounted accessories and carriers
- Rubber strip in the channel helps to cushion load and provide slip resistance
- Built-in C-channel on bottom of each bar lets you mount crossbars to roof-rack legs
- Locking endcaps (included) secure accessories to your crossbars
- Oval crossbars are more aerodynamic than standard square crossbars
- 4 Roof-rack legs clamp directly to your vehicle's raised, OEM side rails
- Position anywhere along the rails to accommodate different-size loads
- Protect your roof-rack rails with rubber pads on leg clamps
- Constructed of UV-resistant, glass-reinforced nylon
- 2 Sportz black, low-profile crossbars hold bike racks, ski and kayak carriers, and other accessories
- Versatile leg-and-crossbar system is easy to install and remove
- Built-in security hardware deters theft - leg bolts require special tool (included) to loosen
Specs:
- Weight capacity: 165 lbs
- Crossbar dimensions: 50" long x 3-1/8" wide x 1-1/4" tall
- Limited lifetime warranty
SXBS8 Rhino Rack SXBS Roof Rack for Elevated OEM Rails - With Sportz Elliptical Cross Bars - 50" Long - Black
Video of Rhino-Rack SXBS Roof Rack Installation - 2010 Toyota Highlander
Video Transcript for Rhino-Rack SXBS Roof Rack Installation - 2010 Toyota Highlander
Today we have a 2010 Toyota Highlander, and we will be testing a Rhino-Rack Roof Rack system part number sxbs8. This kit has black crossbars, but it is also available with silver crossbars as part number sxbs8-silv. We already have the crossbar assemblies put together so now were ready to mount them up on the vehicle. We need to check for two things when we put the crossbar up. First we need to check that the bar is overhanging evenly on both sides of the vehicle, and we also need to make sure it is running perpendicular to our side rails. To do this we will find a fixed point on the side rail on both sides of the vehicle, and measure to the edge of the clamp system.
We will make sure that measurement is the same and then we will note that our crossbar assembly is perpendicular to our side rails. Once we have made sure that the bar is in the proper position we can begin tightening it down. Well move back and forth from the drivers side to the passengers side and tighten down the system evenly. With the front crossbar assembly tightened down were ready to move to the rear. Again we will make sure that the crossbar over hangs evenly on both the drivers side and the passengers side, but we need to make sure that the rear crossbar runs parallel to the front.
To do this we will measure from the center of the front bar to the center of the rear bar on both sides of the vehicle. When we make the measurement the same on both sides we will know that the rear bar runs parallel to the front. Now that we have the rear crossbar assembly in position, well tighten it down in the same manner that we tightened the front. With both of our crossbar assemblies tightened down, were ready to install our locking end caps. And that will finish the installation of our roof rack.
Now we will give you a quick measurement to see how much height we have added to the vehicle. From the top of the side rail to the top of our new crossbar assembly weve added about 2 inches of height, and that does it for our Rhino-Rack, roof rack test fit on our 2010 Toyota Highlander. .
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Rhino Rack Carriers
Fit to this rack on your 1995 Blazer by Chevrolet
