1999 Toyota Tacoma Roof Rack by Inno
Roof Rack Includes:
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
Short Roof Adapter Kit for Inno Square Crossbars
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
Part Numbers: INB127,INJK,INK223
Retail:$379.84
Our Price: $324.00
You Save: $55.84
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
part number: INB127
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Specs:
- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 50" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
IN-B127 Inno Standard Square Steel Load Bars - 50" Long - Black
Short Roof Adapter Kit for Inno Square Crossbars
part number: INJK
Adapter lets you mount a roof rack on your vehicle's short or curved naked roof. Easy installation with components from your existing Inno roof rack for naked roofs.
Features:
- Adapter lets you mount a roof rack to your vehicle that has a short roof or a dramatically curved roofline
- Widens crossbar spread to increase rack stability and carrying capacity
- Steel bars with elastomer coating resist corrosion
- Weather-resistant AES plastic feet
- Bars hook onto the back of your existing Inno feet with included hardware
- Feet clamp to your roof with custom fit kit
Specs:
- Length: 30-5/16"
- Limited lifetime warranty
This adapter provides an easy way for you to install a roof rack on your vehicle with a short or curved roof.
The adapter attaches to your crossbar feet and installs onto your vehicle's roof with components from your Inno roof rack for naked roofs.
To install, use the 4 included holders to hook the 2 adapter bars to the back of your existing Inno roof rack feet. Then clamp the feet to your roof with a custom fit kit. To complete installation, tighten the knobs to secure the kit to your roof.
IN-JK Inno Short Roof Line Adapter Kit
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
part number: INK223
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Specs:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
K223 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Video of Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Review - 2015 Toyota 4Runner
Hi everyone, it's Evangeline here at etrailer. And today, we'll be taking a look at our Inno roof rack system with the Inno square crossbars that are 50 inches long, the Inno feet for square crossbars, right here on our 2015 Toyota 4Runner. Now for a comparison between these square bars and other roof racks design for your 4Runner is if you want more weight capacity, you would go with the square crossbars because they're made of steel, they have more capacity, but they could be slightly noisier compared to an aero crossbar. So that's something worth considering. Also, you might even want the longer crossbars, since if you want more overhang, this doesn't provide more overhang. You could just easily step up the size, no issues at all.
So it is up to you and your adventure. Some kayak carriers and some accessories require more overhang. So check those out before you choose your roof rack. So we have a bunch of different roof rack options right here at etrailer. That's because for your 4Runner, if you're going out on an adventure, you might want a little bit extra space for either your cargo, your roof rack accessories, like your bike racks, your roof boxes, or even your kayak carriers.
That's where this comes in. So this is an aftermarket roof rack. You add this onto your raised side rails on your 4Runner, and that allows you to carry those extra things on your roof. So let's take a look at this specific system, just to see if it's the right fit for you, your vehicle, your adventure, especially compared to the other roof rack options we have. So these are the square bars and they're made of steel.
So they have that nice weight capacity. Inno also has their own unique design. Sometimes, they don't look as good on vehicles, but on our 4Runner, I think their design works out pretty well. It matches just the sporty ruggedness of the 4Runner. So these are the 50-inch long crossbars in black.
So let's take a look at different measurements, just to see how it fits on your roof. So first we'll take a look at overhang. So technically, you have an overhang of two and a half inches. That's measuring from this end of the tower to your endcap. But because of the way our tower is built, where it sticks further out, I would like to say there's actually zero overhang with this crossbar length. Now let's talk about roof height and roof clearance. So roof clearance is going to be from the highest point of the roof to the bottom of our crossbar. So right here, it measures at about three inches of roof clearance. So if you do have clamps that go around your crossbars, that's how much space you have for those clamps. Also, if you carrying around skis and they do have extra thick bindings, you might wanna be concerned about roof clearance. So let's take a measurement that will help out with that too, and that's height. So you have it where it's four inches above your roof. So that's where your accessories are going to be sitting on. Add that to your clearance and that's how much space you have to work with. So your Toyota 4Runner could possibly also come with factory crossbars. These actually had those factory crossbars, but I took them off and replaced them with these roof rack bars because of the limited clearance. The factory bars fit right inside your rails and the space between the bars and your roof is so small that most of our clamps here at etrailer did not fit around them. So if you already have factory crossbars, you're wondering why you might want an aftermarket roof rack, that is the reason. You get more versatility, more clearance, and can carry around more things. Now speaking of clamps, you will have to make sure that your accessories fit around these bars. It's really cool that they have a 220-pound weight capacity. It's even more than your aero bars. But the thing with your modern aero bars is that they're designed to reduce wind noise and wind drag. And the Inno bars have a T-track channel, these do not. So just make sure that whatever accessory you have, if it does have a clamp, it is designed to fit around your square crossbars. We also have an integrated lock. So you do get these keys, and these keys are key to the towers that come with your kit. So one key to access all four locks. So these go right in there, twist them, and then you can take off the endcap. And when you wanna secure them, you just pop them right back in, because once that is locked in place, that endcap prevents you from boosting the tower. Another thing about our tower is we have this pad, and that goes around your raised rail. So this actually has a little bit more cushion compared to our other towers that I've seen. And it's nice to see how well that fitting is around your rail, as well as your options when it comes to what notch you put that strap in, just to get the best fit for you. Now let's talk about the tower. So your 4Runner has these raised side rails. I really like raised side rails because it gives you a little bit of versatility when it comes to any of your roof racks. You can move them back and forth just to get the best crossbar spread for your accessory. Now these towers are designed to go around your raised side rails. They have a strap that fits around those rails, and then they have a lever that tightens down. So let's take a look at that install process. So the install process is very simple, especially since these go right on to your raised rails. So this is pretty much all I need to install my crossbars. I already installed the rear ones so that we install the front ones together. So you have your crossbar, you have your towers, you have your endcaps for your towers, and you have your endcaps for your crossbars themselves. Some other tools that I use are the Moky doorstep, just to give myself some extra height and traction up on to our roof, and a tape measure so you can make sure that everything is aligned and has a good enough overhang. So let's start installing this crossbar. So get your tower, release the rubber strip for the notch that it is in. You may need to loosen that strap if needed, then you go get your crossbar. So we're just gonna bring this in and then feed this through. You may need to push down in order to get enough. So once you have your towers on your crossbars, you'll then make sure again that the straps are released. And now it's time to put them on our roof. While this is possible to do on your own, I highly recommend having your friend help you out, and just grab one end as you put it on your 4Runner. So this is Andy here. He's just gonna grab that tower and help align it with our raised rails. You may need to push the crossbar out a little bit. There we go. That will help both of us get onto the raised rails. Now we have two options when it comes to placing our straps 'cause you do go around the rail and then up into the tower. So what I'm gonna do is I'm gonna place it on the top notch, where it says standard or Normal. And before you fully tighten down your towers, you're gonna wanna measure for overhang. So that's gonna measure from your tower to the end of your crossbars, measure on the other side, and try to get them to match up as much as you can. That's how you know your crossbar is evenly distributed on your towers. But once you've done that, go ahead and tighten this all the way down. I recommend going partway on this side and on that side, and then tighten both down. That way, you don't skew it to one side or the other. Once you have this fully tightened down, just drop that lever so it's out of the way, and then start putting your endcaps on. So you're gonna have an endcap for both the crossbar. That pops right on, there's just a rubber endcap. Then you have this endcap for your tower that fits right into your tower and you have these keys to secure it. So do the exact same process on all four towers, so both of your crossbar pairs, and once you confirm that everything is locked down and tightened down, that's it for the install process. So my personal thoughts about this roof rack system is I like the weight capacity. I really like this design. I think it looks really rugged and sporty. I personally would use this with longer crossbars. Since you do not have T-track channels on top, if I really wanna maximize that 220-pound capacity, I would like longer bar space. So that's definitely something worth considering. If you're not into the square bar, you don't need that much weight capacity, definitely check out the Inno aero crossbars, especially the ones with the Through feet. Those look really good on the 4Runner and might be something worth considering as well. And that was a look right here at our Inno roof rack system with the 50-inch long Inno square crossbars and the Inno feet for square crossbars and your raised side rails, right here on our 2016 Toyota 4Runner..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 - INB127
Short Roof Adapter Kit for Inno Square Crossbars - INJK
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet - INK223
Average Customer Rating: 4.7 out of 5 stars (1070 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. Adapter lets you mount a roof rack on your vehicle's short or curved naked roof. Easy installation with components from your existing Inno roof rack for naked roofs. These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.by: LD05/14/2023
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
by: Kat11/30/2021
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
by: Andrew04/25/2023
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
by: Joey05/20/2022
Fast delivery and great communication about tracking. Easy to follow instructions. Great fit and looks. Thank you.
by: Chris02/08/2023
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
by: Reanna05/04/2019
2010 Dodge Caliber
Awesome product. I’ve been looking for a while to find custom fit roof racks for my 2010 Dodge Caliber. the dealership told me I would have to drill them right to my car and the labour would’ve cost me a fortune. I’m so extremely happy that I found etrailer that had exactly what I was looking for! No drilling, and no hassle! The instructions were easy to follow and the assembly went smoothly ! Fast delievery and great customer service. I would 10/10 recommend etrailer to anyone who is looking for durable, stylish looking roof racks for a great price!
by: Chad K.03/07/2021
For a roof with no mounts, this is a perfect choice!
The fitment selected for me by etrailer.com for my 2012 Ford Escape was perfect. The Inno Rack System is easy to install (made easier by the use of etrailer.com's instruction video links).
I chose the square bar fitment because I prefer the look over the various "aerodynamic designs", while I prefer the look over others, a wind fairing will prove to eliminate the very hint of sound that does emanate into the cabin.
If you are looking for a Clamp mounted system that requires zero modification/easily removabl this is the system for you.
by: Jason05/08/2021
So far so good! Was fairly easy to install. I will say the straps that came with it are not quite long enough for my kayak’s. Not an issue for me though. Overall I am definitely satisfied and would recommend for anyone that needs a rack for kayaks.
by: Brian10/21/2023
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
by: Shawn03/25/2018
Toyota 4Runner
Just installed the etrailer inno square load bars on my 4Runner. I also purchased the Round/square Crossbar Fit Kit .
Looks great and mounted easily to my Prinsu Rack.
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by: Hannon07/25/2019
We needed a set of crossbars for our vehicle and read many reviews of other brands before finding this product. We like the bars and the installation of them. We needed something trustworthy to accomodate our rooftop tent and this fit our needs. We experienced excellent customer service!
by: Eric08/05/2021
I'm very happy with the purchase. I wasn't sure about spending this much money on something that might not work well. After using it, I'd gladly purchase again for a different car.
Fit well on my car, was very solid and secure. Did not do any damage to the paint on my roof.
Installation is pretty easy - be sure to watch the video and follow the instructions for measurements to set bases to. I could see it being a nightmare to install without those measurements.
The kit also comes with a tightening handle that has a built in torque setting. It's not shown in the video, but a good idea to use so you're sure everything is tightened properly.
Fuel economy suffers about 10-15% with the racks on - even empty. I take them off when I don't need them. I marked the bottom surface of the bars with a paint marker so I know where to put the bases when I put them back on. I also painted on the measurements from the door post so it's easier to reinstall.
Also, an item was missing from the box. etrailer customer service was fantastic about getting me a replacement part.
by: Anton09/02/2018
2015 Acura TLX
Great product. Easy to install. This is one of three parts needed for a complete roof rack installation. Here is a photo of the finished installation on my 2015 Acura TLX sedan.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
by: 12/11/2023
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
by: Andres11/05/2021
I'm loving the roof rack , and Ashley from customer service was really helpful. Thanks e trailer. The reviews didn't lie.
by: Caitlin08/10/2023
We planned to leave this on for a short time but it's so unintrusive and functional we've had it on the car for a year now. It works great, we've used it to attach a canoe to the car and we now have a rocketbox attached.
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: JG07/01/2016
2016 Subaru Impreza
Really solid bars and end caps, not much more to say!
by: David04/06/2024
Well made, sturdy, thick and quality materials. Makes no noise at speed, no complaints thus far.
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Peter08/07/2022
These racks fit perfect very easy to install.Bailey was great she was great to work with. She assured me that they had the product and it would be shipped out by the end of the day. I placed the order on 8/3/22 and received it on 8/6/22!
Thanks
by: Michael06/20/2023
Installed on my 2009 Nissan Armada and it fit. If anyone owns an Armada you know that it takes a special kind of crossrail to fit over the large factory roof rails. This did the trick and was cheaper than the other websites. Arrived in less than a week. I’m happy
by: Matthew 03/08/2024
It was easy to install. Seems to be very stable.
25
901
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Roof Rack Recommendation for 2016 Ford Fiesta Sedan
- The best value roof rack we have for your 2016 Ford Fiesta that has a naked roof is the Inno rack part numbers # INB127, # INSUT, and # INK872. This will fit MUCH better than the Sportrack you tried as it is a custom fit rack and what you tried is only semi-custom and is a design that would most likely at least partially transfer to a similar future vehicle.
Then for a 2 kayak carrier the Thule Compass part # TH890000 fits this rack and would be an easy way to carry your kayaks. It's
view full answer... - Can Inno Crossbars and Inno Feet Be Purchased Individually?
- No, the Inno Square Crossbars # INB127 and the Inno Feet for Square Crossbars # INSUT are only sold in pairs as Inno does not offer these items individually.
view full answer... - Recommended Roof Rack for 2000 VW Beetle for Carrying Surfboards
- Without knowing the specifics about how the Yakima rack didn't fit well, it would be hard to compare the fit of the Inno rack to what you had. The Inno rack uses clamps that grab the upper door jamb of the vehicle, which is a reliable attachment method.
To provide a rack for your Beetle, you'd need the following items:
Square crossbars, part # INB127
Roof Rack Feet, # INSUT
Short Roof Adapter Kit # INJK
Custom Fit Kit # INK775
To carry your boards, you could use Inno's Locker
view full answer... - Roof Rack Compatible With The Most Roof Mounted Accessories
- The majority of rooftop mounted accessories such as bike racks and kayaks carrier are universal meaning that a Thule bike rack will work on a Yakima roof rack and vice versa.
If you are looking for a roof rack that is compatible with the greatest variety of rooftop mounted accessory, I recommend using the Inno Square Crossbar System part # INB127, part # INSUT, part # INK758 as square crossbars are generally compatible with a greater variety of rooftop accessories in comparison to round/aero
view full answer... - Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
- Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options.
For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
view full answer... - What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
- Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry:
- Inno Square Crossbars - Steel - Black - 58" Long # INB147
- Inno Square Crossbars - Steel - Black - 65" Long # INB165
- Inno Square Crossbars - Steel - Black - 71" Long # IN434
- Inno Square Crossbars - Steel - Black - 79" Long # IN436L
It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer
view full answer... - Installing an Inno Roof Rack on a 2007 Saturn Ion
- The Inno Roof Rack with bar part # INB127 will install its clamps over the trim into the door of the vehicle. Your fit kit, part # INK124 will hook over your door frame and install the foot pack into the bases over the side of your roof's lip. I've included the illustrations from the instructions as a point of reference to how this should look installed.
I've included an installation video for the 2017 Nissan Maxima so you can see an installation process on a similar 4 door sedan.
view full answer... - Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
- For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
view full answer... - What Roof Rack is Compatible with My 2015 Toyota Camry's Bare Roof?
- For a great economic option that will securely fasten to your bare roof of your 2015 Toyota Camry LE, I suggest the following parts:
- Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127
- Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT
- Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK872
With this roof rack system, you can leave the crossbars on after installation even when they are not in use. However, I recommend removing
view full answer... - Roof Rack for 2010 Honda Accord Crosstour
- For your 2010 Honda Accord Crosstour I would recommend the Inno roof rack part numbers # INB127, # INSUT, and # INK587 which will give you a higher quality square bar roof rack at a lower price.
view full answer... - Inno Roof Rack Compatibility with 2008 Hyundai Tiburon
- The Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 are a fit for your 2008 Hyundai Tiburon when used with the Inno Feet for Square Crossbars - Naked Roofs # INSUT, the Short Roof Adapter Kit for Inno Square Crossbars # INJK, and the Custom Fit Kit # INK295.
The fit kit is the key to the question you are asking as it is designed specifically for your vehicle to fit the door jambs. The clips will follow the jamb to roof transition perfectly and the pad feet will ensure
view full answer... - Roof Rack Recommendation for 2007 Subaru Impreza Sedan for Roof Tent
- The Inno Roof Rack Square Bar kit is made of part numbers # INB127, # INSUT and # INK106 would be your best option for a roof rack confirmed to fit the naked roof of your 2007 Subaru Impreza Sedan. This rack has a weight capacity of 220 pounds. You'll want to check with the manufacturer of the tent though to be sure it can be used on roof racks like this.
If you preferred an aero shaped roof rack to cut back on wind noise we also have the # RRVA118B-2, # RRRLKVA, and # DK070.
view full answer... - Weight Rating of Inno Roof Rack for 2013 Lexus GX 460
- Roof racks are rated for dynamic load capacity. A static rating is not provided since it is presumed a rack on a car will be moving.
Vehicle roof weight capacities are usually common for all years that are within the same generation. The Current generation of the GX 460, the second generation, includes all models from 2009 to the present. I checked the online owner's manual for the 2013 GX 460 but no specific weight rating for the roof is indicated; your printed manual may differ and
view full answer... - Roof Rack Recommendation for 2012 Dodge Caliber for Small Cargo Box
- For your 2012 Dodge Caliber we have one roof rack option. The Inno square roof rack part numbers # INB127, # INSUT, and # INK555 which would do a great job to carry a small cargo carrier as long as it's compatible with the smaller crossbar spread of this rack. The part # MPG901 would work and provides 12 feet of cubic space.
view full answer... - Fit of SportRack Vista XL Roof Cargo Box w/ Inno Square Crossbars on 2011 Jeep Grand Cherokee
- The Inno roof rack you mentioned, which consists of the following parts, # INB127, # INTR and # INTR132 would work just fine with the SportRack Vista XL roof mounted cargo box, part # SR7018. The roof rack is compatible with a 2011 Cherokee that has the roof side rails WITH the chrome strips on them.
The cargo box is compatible with crossbar spreads of 25-7/8, 27-7/8, and 29-7/8 inches. Since the crossbars will be capable of sliding fore and aft as needed, you'll have no trouble spacing
view full answer... - Roof Rack and Surfboard Carrier for 2008 Honda Accord Sedan
- The Inno square bar roof rack part numbers # INB127, # INSUT, and # INK745 which fits your 2008 Honda Accord sedan would be the rack I recommend as it's a higher quality roof rack at a lower price than it's competition.
Then for a surf board carrier the Inno Surfboard Carrier part # INA744 would be a great solution as well.
view full answer... - Is Fit Kit Available for Old Thule 400XT Feet on 2004 Honda Pilot
- Thule actually didn't start making the Thule Aero roof rack with feet # TH400XT until 2006. When I spoke with my contact at Thule she said that the discontinued fit kit 2163 is what was used for a 2006-2010 Honda Pilot. Since the first generation Honda Pilot was from 2003-2008 this kit may work for your application but Thule never test fit this and you'll probably have a really hard time finding this kit as the roof rack was discontinued back in about 2012.
If you can't find that fit
view full answer... - Can Inno Roof Rack Crossbars for 2013 Toyota Prius Be Installed Further Apart
- The Inno square bar roof rack for your 2013 Toyota Prius is an excellent choice for a simple, yet effective roof rack. Each roof rack manufacturer tests the different points of strength on the vehicle and they base the locations of the feet and fit kits off of where the vehicle is strongest. So while you can technically attach the crossbars wherever you want to, the fit kits are only designed for specific spots on the vehicle and if you move them you'll be dealing with unknown weight ratings.
The
view full answer... - Inno Roof Rack for a 2001 Toyota Tacoma Xtra Cab with Naked Roof
- For your 2001 Toyota Tacoma Xtra Cab you will need the following parts for an Inno roof rack:
50 inch crossbars # INB127 (this part number comes with 2 bars)
Foot pack # INSUT
Custom fit kit # INK223
Short roof adapter # INJK
Your assessment of how the short roof adapter works is correct. No additional parts are needed and the rear bar and feet will be secured by the short roof adapter.
view full answer... - Roof Rack for 2010 Ford Focus 2-Door to Carry Kayak
- There is a roof rack that will fit your 2-door 2010 Ford Focus, but a 2-door version is called a coupe, while a 4-door is called a sedan, so you'll need the option for the 2-door coupe. And there is one rack that will fit the 2010 Ford Focus with two doors, which is from Inno and consists of the following parts:
- Inno Square Crossbars # INB117
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit for Inno # INK571
- Short Roof Adapter Kit for Inno Square Crossbars # INJK
I
view full answer... - Roof Rack Confirmed to Fit a 1997 Toyota Avalon
- We do have a roof rack system confirmed to fit your 1997 Toyota Avalon but but none of them are Thule systems. I've linked all of the ones that fit.
I recommend the Inno rack, parts # INB127, # INSUT, and # INK223. This rack includes trhe locks to secure it to your roof. I've linked a video of it being installed on a Camry for you to take a look at.
view full answer...
Inno Accessories
Fit to this rack on your 1999 Toyota Tacoma
Info for these parts were:
Written by:
Tyler C
Updated by:
Lisa S
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.