1990 Dodge Dakota Roof Rack

Economically priced, removable roof rack clamps to your vehicle's naked roof. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers and cargo baskets. Included locks secure the rack to your roof.

Features:

• Low-cost, removable roof-rack system for your vehicle with a naked roof
  • May require the SportRack short-roof adapter (A21116; sold separately) for short roofs or dramatically curved rooflines
• 2 Square crossbars support bike racks, ski and snowboard carriers, kayaks, and other cargo
• Integrated locks secure the rack to your car's roof to deter theft
  • Includes 2 keys with chrome finish
• Rubber pads on bottoms of feet will not scratch or chip your vehicle's paint
• Easy installation - no tools required
  • 4 Roof-rack feet clamp to your roof and door jambs with included clips
• Sturdy steel construction with black plastic coating resists rust and harsh UV rays

Specs:

• Crossbar maximum weight capacity: 130 lbs
• Crossbar dimensions: 45-1/2" long x 3/4" wide x 3/4" tall
• 1-Year warranty

The semi-custom SportRack Frontier roof rack easily installs on your vehicle's bare roof so you can carry extra cargo to your next destination. Adjustable, rotating footpads combine with an easy-to-use numbering system to make the rack conform to your roof for a good fit.

A unique numbering system is inscribed on the crossbars to aid in installation. This system corresponds to numbers noted in the easy-to-read application guide. First, find the number indicated for your vehicle, and then slide the roof-rack feet along the crossbars until they line up with the appropriate number for your application. Tighten the feet in place with the included Allen wrench.

Refer to the application guide to find specific measurements that allow you to properly position the rack on your roof. To begin installing the roof rack on your vehicle, open the passenger's- and driver's-side doors. Place the front crossbar first, and make sure that the screws that hold the clamps in the roof-rack feet are loose before positioning the feet on your vehicle.

Before attaching the clamps to the door jambs of your vehicle and tightening them down, you need to make sure that the feet and pads are oriented correctly. The bottom of each foot can be rotated to better fit the slope of your roof. Make sure that the feet are sitting flush against the roof.

Once the feet are properly positioned, attach the clamps to the door jambs and tighten via the screws in the feet. After the front crossbar is positioned, review the instructions for the measurements needed to place the rear crossbar and repeat the same process for that crossbar.

Once everything is tightened down, place the locking covers over the feet to deter theft of the rack.

A21003S Sport Rack Frontier Roof Rack for Bare Roofs