RC Manufacturing

How to Attach the RC Aluminum A-Frame Toolbox # 350970 to a Box Trailer Frame
You could use 1/4 inch self tapping screws with fender washers to secure the RC Aluminum A-Frame Toolbox, # 350970 to your trailer frame. It is important that you use screws that are long enough to penetrate the trailer frame when a washer is used. The recommended method for attaching a toolbox to a trailer frame is to use bolts, but your method will work as well. If you would rather use bolts, you could drill an access hole in the frame (I recommend the bottom of the frame) and use the fish
view full answer...

Construction of RC Industries Z-Series Underbody Truck Toolbox # UB1416-24
The RC Industries Z-Series Underbody Truck Toolbox you mentioned, part # UB1416-24 is constructed of 14 gauge powder coated steel. The T-Handle is constructed of stainless steel.
view full answer...

What is the Thickness of the Aluminum Used for the A-Frame Trailer Storage Box # 350975
The RC Manufacturing A-Frame Toolbox, # 350975, is made of .072 inch thick diamond tread plate, which converts to slightly over 1/16 inch, but less than 5/64 inch.
view full answer...

Availability of Door Hinge for RC Manufacturing Underbody Toolbox # UB1818-48
Yes, I do carry a door hinge for your RC Manufacturing Underbody Toolbox, part # UB1818-48. This toolbox uses a stainless steel piano hinge as the door hinge. To get the correct size hinge, I would recommend to measure the width and length of the hinge you have now. To find out the size you will need, fully open the door of the toolbox and measure the width of the hinge. If the toolbox has a width of 2 inches, you will use the Redline 2 Inch Wide Stainless Steel Hinge, part # SH200. If it mea
view full answer...

Will Door Of RC Manufacturing Toolbox # UB1919-30 Open If Mounted on Flatbed Truck
Yes, you will be able to open the door or lid of the RC Manufacturing Toolbox, part # UB1818-30, if mounted on flat surface of your flatbed truck. Another box that is that is similar to part # UB1818-30, but a little bigger that I would recommend is RC Manufacturing Toolbox, part # UB1818-36, which is 6 Inches longer than part # UB1818-30. I have included a link to all the underbody toolboxes we have available.
view full answer...

Construction and Origin of the Underbody Truck or Trailer Toolbox # UB1818-36
The Underbody Truck or Trailer Toolbox, 36x18x18, item # UB1818-36, is constructed of minimum 14 gauge steel and in some places uses 13 gauge steel for strength. These boxes are manufactured in the U.S.A.
view full answer...

Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item # 350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a properly sized drill bit to drill 4 mounting holes in the proper locations on your trailer frame. Keep the holes as far to the front, back and sides of the box as possible for the most secure connection. Then use bolts, washers and nylon lock nuts to
view full answer...

Dimensions of RC Manufacturing Trailer Tongue Tool Box# 350970
The RC Manufacturing trailer tongue toolbox is 14 inches deep (front to back) and 14 inches tall. The front measures 18 inches long and the back is 30 inches long. You can see these dimensions in the photo I edited for you.
view full answer...

RC Manufacturing Trailer Tongue Tool Box # 350975 Dimensions
The dimensions for the RC Manufacturing Trailer Tongue Box are; width at back is 36 inches, width at front is 21-1/2 inches, the height of the box is 20 inches and the depth of the box is 16 inches. You can see these dimensions in the photo I have edited for you.
view full answer...