See What Fits Your Vehicle
customer service | view cart  View Cart
Holland Fifth Wheels
Holland Fifth Wheel King Pins

Holland Lunette Ring
Holland King Pin Gauge


Holland





Holland Reviews and Installation Videos


Expert Answers about Holland

  • Will the Holland Inverted Fifth Wheel Hitch # FW0001 Install Upside Down on Truck Bed
  • I spoke with my contact at Holland and confirmed that the Inverted Fifth Wheel Hitch, # FW0001, can be used upside down to mount in your truck bed. To install this hitch head on the bed of your truck, you will need to mount the hitch to a steel plate and frame supports to secure the plate to the frame of your truck. I recommend welding the frame supports to a 1/4 inch thick steel plate approximately 36 inches wide x 50 inches long and the frame supports can be bolted to your truck frame using
    view full answer...

  • Pintle Hook Needed to Haul 25K Load on 12 Ton Rated Trailer
  • You will need to ensure that the capacity of the pintle hook you use exceeds the weight of the trailer plus the load placed on it. The 12 ton figure mentioned on your trailer is likely to be its capacity. The Holland Pintle Hook you referred to has a 90,000 lb capacity, which is almost positively more than enough to handle the weight of the trailer plus the equipment carried on it, but keep in mind that your towing system will only be rated at the capacity of its lowest rated component. T
    view full answer...

  • Diameter of Lunette Ring Compatible with the Holland Pintle Hook # PH210RN11
  • The Holland Pintle Hook you mentioned, part # PH210RN11 is designed for use with a 3 inch lunette ring, due to the large size of the pintle hook. You can see our selection of 3 inch lunette rings by clicking on the provided link.
    view full answer...

  • How Does the Holland Pintle Hook with Air Cushion and FastLatch Plumb to a Vehicle
  • To plumb the Holland Pintle Hook with Air Cushion # PH410RA11 you will need to tap into the air brakes of your vehicle and then using a 3/8 inch NPT threaded fitting attach it to the air chamber of the # PH410RA11.
    view full answer...

  • Gooseneck to Fifth Wheel Adapter Recommendation for a Truck with a B and W Turnover Hitch
  • Check out the Curt X5 Fifth Wheel Adapter for B and W Square Shank Turnover Ball Hitches # 16310. This adapter will convert your B and W turnover ball gooseneck hitch to a fifth wheel rail to install your Reese 5th wheel hitch into. You should note that this adapter is not designed to be used with sliding hitches.
    view full answer...

  • Will Holland 5th Wheel King Pin Fit a 1978 Holiday Rambler 5th Wheel Trailer
  • The Holland 5th wheel king pin, # T809, is an industry standard size. It will need to be welded on by a qualified professional. To determine if it will fit the pin box on your camper I have included a picture that shows the dimensions for you. It may be easier just to replace the pin box if you are able to locate one that is the same make and model number.
    view full answer...

  • Easy to Operate Fifth Wheel Hitch for 1999 Chevy Silverado 2500 HD
  • If you are trying to actuate the slide bar while hitched on uneven ground, the pressure of the king pin against the slide bar can make it difficult to operate. A fifth wheel hitch with a 4 way pivoting head that uses a different method of securing the king pin other than the slide bar would make it easier to connect and disconnect your fifth wheel. Curt offers a 5th wheel hitch that goes a step better than the 4-way pivot. If your truck has an 8 foot bed, the Curt Q20 5th wheel hitch, part #
    view full answer...

  • What are the Dimensions of the Fifth Wheel Trailer King Pin # T809
  • What you are describing sounds like a pin box. The part that is angled up would be at the front so when you hitch up to the 5th wheel hitch the skid plate on the hitch and pin box will make contact with each other. All of these parts are made of steel, like # T809. The upper thickness of T809 is 7/8 inches overall but where it gets welded to the trailer is 1/2 inch thick. I have included a picture that shows the measurements of the king pin for you.
    view full answer...

  • How Does the Holland Truck Bed Retractable King Pin, # fw0030, Install and Operate
  • The retractable king # FW0030 will include a threaded handle that you would use to raise the pin from the storage position. Simply screw in the handle and pull up. To install the Holland Truck Bed Retractable King Pin, # fw0030, you will need to make sure there is at least 6.625 inches of clearance below the bed, when the bed is loaded down, at the center of the rear axle where the king pin will be when retracted. Checking the clearance with a load will ensure that the suspension can work pro
    view full answer...

  • Shaft Measurements of the Holland Fifth Wheel King Pin
  • I pulled the Holland Fifth Wheel King Pin, part # T809, from my warehouse and measured the different diameters of the shaft. The bottom portion diameter measures 2-13/16 inches, the middle portion measures 2 inches and the top portion measures 2-7/8 inches. I have included an image containing all of the measurements plus more that may be helpful.
    view full answer...

  • Bolt Hole Spacing on Holland Pintle Hook #PH30RP41 with Fast Latch
  • I pulled one of the # PH30RP41 pintle hooks from our warehouse and took some measurements for you. The horizontal hole spacing is 3-3/8 inches from center to center. The vertical hole spacing is 1-3/4 inches from center to center. The bolt hole diameter is 17/32 of an inch. You will want to use a grade 8 bolt for installation. I have included a diagram of the hole layout to show the points at which I measured.
    view full answer...

  • Can a Holland Binkley Inverted 32k 5th Wheel Trailer Hitch be Used Upside Down in a Truck Bed
  • The Holland / Binkley Inverted Fifth Wheel Trailer Hitch, # FW0002-45, is not designed to be used as a standard upright hitch. The problem you will run into is having to have a custom mount fabricated for it and then a custom installation kit since it would not fit in the Reese rails. After all of that, any savings you would have had with the hitch would dissipate. What you could do is install the inverted hitch on the trailer and then use the Holland Truck Bed Retractable King Pin, # fw0030
    view full answer...

  • What Material is the Holland Fifth Wheel King Pin, # T809 Made Of
  • The Holland Fifth Wheel King Pin, # T809, is machined steel (specifically AISI 8630H hardened to 302-363 BHN). You should not need any special welding equipment outside of what you would normally use for welding steel. The same for the heat up/cool down. It will be the same as when welding any other steel component of like steel. Any welding should be done by a qualified professional welder.
    view full answer...

  • Why is the Holland / Binkley Inverted Fifth Wheel Trailer Hitch Inverted
  • For trucks that have a king pin mounted in the bed of their truck, they would need to have the Holland / Binkley Inverted Fifth Wheel Trailer Hitch, # FW0001, mounted to the trailer they wanted to tow. The Retractable king pin that would mount in the bed of the truck is # fw0030. You might find this type of set up on a flat bed truck or other cab and chassis style truck.
    view full answer...

  • Dimensions of Holland/Binkley Inverted Fifth Wheel Hitch Part FW0002-45
  • The Holland/Binkley Inverted Fifth Wheel hitch you are referring to, part # FW0002-45 is 8-1/8 inches tall measured from the top of the mounting plate to the top of the hitch plate itself. The mounting plate is rectangular, and measures 6x10-5/8. We also offer the retractable king pin, part # FW0030.
    view full answer...

  • Could a 1997 Ford F-350 Have a Inverted Fifth Wheel Setup
  • This Holland / Binkley Inverted Fifth Wheel Trailer Hitch # FW0002-45 that you referenced is designed to be installed onto a trailer and then a Holland Truck Bed Retractable King Pin # fw0030 will be installed into the bed of your truck. The # fw0030 would require some fabrication to be installed in the bed of your 1997 Ford F350, but it is possible to make this setup work for you. You will want a qualified welder/fabricator to install this product as it is largely a custom install that will
    view full answer...

  • Compatible Couplers for Truck Bed Retractable King Pin Part # FW0030 for use with Gooseneck Trailer
  • The Holland Binkley Inverted Fifth Wheel Hitch, part # FW0002-45 is compatible with your retractable king pin. The gooseneck trailer coupler would require some modification so that the inverted fifth wheel hitch could be welded to it. If your existing gooseneck coupler is height-adjustable, a length of 4 inch outside diameter tubing or pipe with could be fabricated with a plate and gussets welded to the bottom. The inverted fifth wheel hitch could then be welded to the bottom plate. This fabr
    view full answer...

  • How to Install Holland / Binkley Inverted Fifth Wheel Hitch # FW0002-45 on a Gooseneck Trailer
  • The Holland / Binkley Inverted Fifth Wheel Trailer Hitch, part # FW0002-45, is designed to be mounted to a trailer for use with a Holland Truck Bed Retractable King Pin, part # FW0030, welded into the bed of your 1996 Chevrolet truck. To install the Holland Inverted fifth wheel hitch on your gooseneck trailer you would need to remove the king pin from your exisitng gooseneck trailer coupler and weld the inverted fifth wheel hitch to the square or round coupler on the gooseneck trailer. It wou
    view full answer...

  • Where Does the Air Supply Connect on the Holland Pintle Hook with Air Cushion # PH410RA11
  • The air supply connects to the fitting in the back of the diaphragm, see photo, that is plugged with an orange plastic plug to keep debris out of the unit in shipping and prior to installation.
    view full answer...

  • How Long is the Pin Portion of the Fifth Wheel Trailer King Pin, # T809
  • My first reaction was that they would all be the same. But, I went out to our parking lot where there are many recreational 5th wheel trailers with king pins I could measure. I measured about 10 and all of them, except for one, measured about 2-5/8 inches from the end of the pin to where it meets the base. I also measured the Fifth Wheel Trailer King Pin, # T809, and it measures 3-11/16 inches from the bottom of the pin to the base and it is 4-5/8 inches tall overall.
    view full answer...

  • What Fifth Wheel Hitch Assembly will Also Allow Use of a Camper on a 2002 Dodge Ram 2500 4x4
  • If you have the 8 foot bed on your 2002 Dodge Ram 2500 4x4 Extended Cab I would recommend to use the Reese Elite Series Fifth Wheel Hitch, part # RP30142 and Reese Installation Kit, part # RP30069. This fifth wheel setup will use a custom, under-bed installation kit that will allow full use of your truck bed after the hitch is removed. Once the under-bed rails are installed on your vehicle it is just a matter of removing the hitch from your truck bed to install your camper. The fifth wheel h
    view full answer...

  • Does a King Pin for the Need to be Fabricated to Use Inverted 5th Wheel Trailer Hitch # FW0002-45
  • You are correct, you do not see many trailers with an inverted 5th wheel attached to them so it is sort of an unexpected theft deterrent. Yes, the Holland / Binkley Inverted Fifth Wheel Trailer Hitch, # FW0002-45, is easy enough for an experienced professional like yourself. He will also need Holland Truck Bed Retractable King Pin, # fw0030, installed in the truck bed, so you will not have to fabricate anything. But it does involve welding a steel plate to the truck and bolted and welding th
    view full answer...

  • How is Holland Truck Bed Retractable King Pin, # fw0030, Installed
  • To install the Holland Truck Bed Retractable King Pin, # fw0030, you will need to make sure there is at least 6.625 inches of clearance below the bed, when the bed is loaded down, at the center of the rear axle where the king pin will be when retracted. Checking the clearance with a load will ensure that the suspension can work properly and no damage will come to the rear end when there is up and down movement. You will need at least a 1/4 inch thick steel plate, at least 36 inches wide by 50
    view full answer...

  • What is the Upper Coupler Thickness of this Holland Fifth Wheel King Pin # T809
  • This Holland Fifth Wheel King Pin, part # T809, has a upper coupler thickness of .38 inches. I went out into our ware house and measured to be sure. The other model # T809 king pins from Holland have different upper coupler thicknesses have letters after the part # that designate the upper coupler thickness.
    view full answer...

  • Recommended Inverted Fifth Wheel Hitch for Flatbed Trailer
  • Although both hitches preform the same basic function, I would recommend going with the double pivot model that you referenced, part # FW0002-45. This model pivots front to back and side to side, which will provide some leeway to make hitching up much easier on pavement that is not perfectly level.
    view full answer...

  • What is the Plate Thickness at the Base of the Fifth Wheel Trailer King Pin # T809
  • The plate at the base of the Fifth Wheel Trailer King Pin, item # T809, where it is welded to the trailer is 1/2 inches thick. From the top of the base to the bottom the thickness is 7/8 inches. I have added a dimensions to a photo for you to explain the measurements I took.
    view full answer...

  • Recommendation for a 5th Wheel Trailer Hitch for a 1998 Ford F-800
  • The Holland / Binkley Inverted Fifth Wheel Trailer Hitch, # FW0002-45, is designed to be mounted to a trailer for use with a king pin, # FW0030, welded into the bed of the truck. For your truck, you would need a regular fifth wheel as it is designed for use in the bed of a truck. Instead, we have a 5th wheel trailer hitch designed for medium duty trucks like your Ford F-800. Take a look at the Reese Low-Profile 5th Wheel Trailer Hitch, # RP30054. This hitch is specifically designed for your a
    view full answer...

  • Dimensions of the Holland Fifth Wheel King Pin, # T809
  • I went out to the warehouse to measure a Holland Fifth Wheel King Pin, # T809. From the bottom of the plate to the end of the king pin it measures 3-11/16 inches. It has an overall height of 4-5/8 inches. The base has a diameter of 8 inches.
    view full answer...

  • What is the Capacity Of Wallace Forge 3 Inch Trailer Lunette Ring
  • I contacted our representative at Wallace Forge and he informed me that the maximum capacity of part # 1385 is total weight, which includes trailer and cargo. He said that 60,000 pounds is the most weight you can pull with the 3 Inch Trailer Lunette Ring, part # 1385. For example, if you have a 10,000 pound trailer, you could carry 50,000 pounds of cargo, if your trailer and towing vehicle were capable of towing that much weight. This part is not rated for sheer rating. If you need a mounting
    view full answer...

  • How Does the King Pin Extend and Retract on the Holland Truck Bed Retractable King Pin, # fw0030
  • The tube-like structure on the bottom of the Holland Truck Bed Retractable King Pin, # fw0030, is a housing for a spring and rod or plunger that holds the retractable king pin down when not in use, and props it up to allow the trailer to couple to it. There is a handle that threads into the top of the king pin to pull it up. The force required to pull it up and overcome the pin holding it down can be achieved by an individual person. When ready to retract the king pin, you simply apply enough
    view full answer...



Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com