EGR

Expert Answers about EGR

How to install EGR In-Channel Slimline Air Deflectors and Remove Old Tape on Air Deflectors
The EGR In-Channel Slimline Window Visors, item # 574861, are installed by positioning the visors leading edge in the window track with the window down and then slightly bending it and working the visor into the window track all the way to the rear. We have an online video installation of this product on a similar vehicle that should help with your installation, see link. Removing your existing tape on air deflectors will require a bit of work. I removed a set of these off of a 1995 Chevrole
view full answer...

Installation of EGR Aerowrap Full Wrap Bug Shield # 393171 on 2006 Ford F-150
To install the EGR Aerowrap Full Wrap Bug Shield # 393171 on your 2006 Ford F-150, you will need to remove the grille. However, the installation process is relatively easy and requires no drilling. I have attached a video providing more information.
view full answer...

Window Visors for a 1990 Full Size GMC Jimmy
Yes the EGR Tape-On Slimline Window Visors, # 61031, will fit the full size 1990 GMC Jimmy. This is a 2-piece set for the front windows on your Jimmy.
view full answer...

How Much of the Tires is Covered When Using EGR Fender Flares, Part # 753044, on 2003 Expedition
The EGR Custom Molded Fender Flares, part # 753044, fit a number of Ford pickup trucks but are not intended for use on the 2003 Ford Expedition. The closest item we have that is compatible with your Expedition is the Putco Fender Trim Kit for the 2003 Ford Expedition, part # P97209, which is a stainless steel trim kit for all four fenders. It comes complete with all required stainless steel hardware and installs without any drilling. This item is protected by a Lifetime Warranty from Putco.
view full answer...

Will an EGR Bug Shield Hood Protector Fit a 2012 Dodge Ram Laramie 1500 Limited
The EGR hood protector # 392651 will fit your 2012 Dodge Ram Laramie 1500. This is a full wrap protector that covers end to end on the hood. For a thicker, taller shield that will also fit we have # 302651. This protector covers the center section of the hood but does not extend to the ends.
view full answer...

EGR Bug Shield Installation on a 2002 Chevrolet Silverado HD2500 LS Extended Cab
The EGR Superguard Bug Shield, # 301421, will install using the same 5 holes as your patriotic bug shield # 301429. I spoke with my contact at EGR and verified that the installation will be the same for both bug shields. They are made from the same mold so they will have the same fit and installation as your current bug shield.
view full answer...

Comparing EGR Window Air Deflectors for a 2012 Toyota Tacoma
The difference between EGR window air deflectors # 564981 and # 564971 is what vehicles they fit. Deflector # 564981 fits 2005 to 2012 Toyota Tacoma Access and Double Cab models. Deflector # 564971 fits 2005 to 2012 Toyota Tacoma Regular Cab models.
view full answer...

Bug Shield Color Choices for 2012 Ford F150
I have linked you to the available bug shield options for you 2012 Ford F150. As you can see, the smoke color is all that is available. You might be interested in the Husky Liners Paint Protection Kit, part # HL06949. The kit contains translucent 6-mil thick urethane film pieces that will protect the front of your hood, fenders and door edges. The film pieces are nearly invisible, and would allow the paint color to show through. I have linked you to the installation instructions of the Pai
view full answer...

Can I Make the EGR Window Visors for a 2002 Chevrolet TrailBlazer Ext Fit a Non-EXT Model
The correct 4 piece EGR In-Channel Slimline Window Visors for the 2002 Chevrolet TrailBlazer that is not an EXT model is part # 571251. The EGR In-Channel Slimline Window Visors for the 2002 TrailBlazer EXT will not work for the non-EXT models and modification is not recommended.
view full answer...

Installation of EGR Superguard Bug Shield # 303371 on a 2012 Ford F-150 XL
The correct EGR Superguard bug shield for a 2012 Ford F-150 XL is # 303371. The Superguard Bug Shield attaches to the hood of your truck with the included hardware. The hardware, threaded screw plugs, with screws, fit in existing holes in the hood of your truck. The plugs are inserted into the holes on the hood and the shield is attached to the hood with screws that will screw into the plugs. Only vehicles that have the grille attached to the hood would have to have the grille removed.
view full answer...

Is there a Bug Shield That Mounts Over the Chrome Trim on the Hood of a 2012 GMC Sierra 1500
The EGR Aerowrap Bug Shield, # 391601, that you referenced will fit on your 2012 GMC Sierra 1500 Crew Cab, but it will cover the chrome on your hood. For a bug shield that will not cover the chrome we offer the Husky Liners Bug Shield, # HL07219, which is a protection system made from a urethane film that is designed to help eliminate nicks, dings and bug stains on the hood of your 2012 GMC Sierra 1500 Crew Cab. This film will install above the chrome on your hood, however, it is not a p
view full answer...

Installation of EGR Superguard Bug Shield # 303371 on 2012 Ford F-150
The EGR Superguard Bug Shield, part # 303371, will attach to the hood of your 2012 Ford F-150 with the included hardware. The hardware is threaded screw plugs, with screws, that will use existing holes in the hood of your vehicle. The plugs are inserted into the holes on the hood and the bug shield is attached to the hood with screws that will screw into the plugs. The installation does not require any drilling.
view full answer...

Which Air Deflectors and Window Visors are Available for a 2007 Chevy Tahoe
We ave several options for window visors for a 2007 Chevy Tahoe. I have included a link to them for you. A rear set or individual pieces are not available. Only front sets or sets of 4 are available.
view full answer...

EGR Aerowrap Bug Shield Installation on a 2006 Hummer H3
The EGR Aerowrap Bug Shield, # 391311, installs using plastic screw plugs using existing holes on the underside of your hood. I have attached an installation video of a similar Aerowrap bug shield. The vehicle is different, but the installation process is the same.
view full answer...

Is Mounting Hardware Included on EGR Aerowrap Hood Protector # 394801 For 2011 Nissan Armada
The EGR Aerowrap Hood Protector, part # 394801, for your 2011 Nissan Armada, does come with the no-drill installation hardware. the hardware is supplied with the part from EGR. The installation hardware is particular to that part number for the specific vehicle it is designed to fit.
view full answer...

Will the EGR Chrome Aerowrap Part # 391624 Fit a 2011 Chevy Silverado
The EGR Chrome Aerowrap Bug Shield you referenced, part # 391624 is a fit for 1999-2007 Sierra Classic and 2000-2006 Yukon and Yukon XL models. To see the bug shields available for your 2011 Silverado, click on the provided link.
view full answer...

Side Window Deflectors for a 2012 Toyota Tacoma
I checked with EGR and they do list a window deflector fit for the 2012 Toyota Tacoma regular cab. You can use the EGR In-Channel Slimline Window Visors 2 Piece, # 564971. These deflectors fit in the window upper channels instead of using adhesive to stay in place.
view full answer...

How Does the EGR Superguard Bug Shield Hood Protector Install on a 2007 Jeep Commander
To install this EGR Superguard Bug Shield Hood Protector # 305041 on your 2007 Jeep Commander you will snap the installation blocks into ports under your hood and then use the included screws to attach the bug shield to the blocks. Check out the video I attached that shows a similar Superguard Bug Shield installing onto a similar vehicle to give you an idea of how it installs.
view full answer...

Will the EGR Rugged Look Fender Flares # 751524 Fit on a 2001 GMC Sierra 4x4 Extended Cab 6 Foot Bed
Yes the 4 Piece EGR Custom Molded Fender Flares, # 751524, are custom fit for your 2001 GMC Sierra 4wd with 6-1/2 foot box. The difference between the rugged look, # 751524 and OEM look fender flares, # 781524, that will fit your truck is that the rugged look flares are much wider and extend up on the fender farther than the OEM look fender flares.
view full answer...

How Does the EGR Aerowrap Bug Shield # 394991 Install on a 2009 Nissan Frontier
This EGR Aerowrap Bug Shield # 394991 that you referenced uses plastic screw plugs that will install into existing holes on the underside of your hood. I attached a video that shows how a similar Aerowrap bug shield will install onto a different vehicle to give you an idea of how it will install.
view full answer...

Installation of EGR Superguard Hood Protector # 304801 on a 2010 Nissan Titan
The EGR Superguard Hood Protector, part # 304801 will install on a 2010 Nissan Titan. The Superguard protector will attach to the hood of your vehicle using existing holes on the underside of your hood. It includes the mounting hardware. The mechanical installation means that you will need to use hand tools to install the protector. You do not have to do any drilling or use tape to attach the protector to your vehicle.
view full answer...

Availability of Window Vent Shades for a 1989 Chevrolet S-10 Blazer 2 Door
Yes, we do have window vent shades or window air deflectors for the 1989 Chevrolet S-10 Blazer 2 Door. I have the Weather Tech Side Window Air Deflectors, part # WT70152. The Weather Tech air deflector will install in the window channel and has a light tint. I like the Weather Tech deflectors because they are a thicker material and the installation is clean and simple. I am including a link to the installation instructions on the Weather Tech deflectors.
view full answer...

How Does the EGR Superguard Bug Shield Hood Protector # 303611 Secure to a 2010 Ford Explorer
The majority of what holds this EGR Superguard Bug Shield Hood Protector, part # 303611, is the factory scrivets that are in the middle of the grille. The two screws that go on the outer portion help secure it, but more screws would not be necessary to secure this to your 2010 Ford Explorer. The screw plugs will install in outer wing holes in the underside of the hood. They should snap right into what looks like slots on the underside of the hood near the outer edges.
view full answer...

How Do The EGR Air Deflectors # 573171 Install In Window Channel on 2010 Ford F-150
I contacted our representative at EGR and she informed me on how to install EGR Air Deflectors, part # 573171, on your 2010 Ford F-150. Our representative informed me that part # 573171 slides into the window channel where the molding is and where the window meets weather stripping. She said that it will be a tight fit at first, and you may have to help the window up with your hand. She also informed me that the windows should be left up 3 to 4 days to help part # 573171 stay in the window ch
view full answer...

Will EGR Aerowrap Full Wrap Bug Shield Hood Protector # 392651 Fit 2010 Dodge Ram Sport Model
I contacted our representative at EGR and she informed me that the EGR Aerowrap Full Wrap Bug Shield Hood Protector, part # 392651, will fit the 2010 Dodge Ram Sport if it is the 1500 model. Mechanical no drill installation means that there is no drilling needed for installation, and that part # 392651 will install using existing screw holes. Part # 392651 bolts in like an OEM bug shield would install.
view full answer...

Will EGR Superguard Bug Shield Hood Protector # 303611 Cover Grille on 2010 Ford F-250 Super Duty
The EGR Superguard Bug Shield Hood Protector, # 303611, is designed to fit on the front edge of the hood and should not cover the Super Duty lettering on the grille. You can see in the pictures on the product page how the shield will contour around the grille portion of the truck.
view full answer...

Does the Factory Grille need to Be Removed to Install Superguard Bug Shield Hood Protector # 303171
I spoke with my contact at EGR, and she stated that in order to install the Superguard Bug Shield Hood Protector, # 303171, you would have to remove the factory grille from the vehicle. One of the benefits of this shield is that it is a no-drill application, so you will not have to drill holes into your vehicle.
view full answer...

What Are Dimensions On EGR Superguard, # 303531, And EGR Aerowrap, # 393531, For 2007 Ford Explorer
I called the supplier (EGR) to see if they had dimensions available on the EGR Superguard, # 303531, and the EGR Aerowrap, # 393531, for your 2007 Ford Explorer XLT. They did not have any dimensions available, but they said the dimensions are the same for both of them, the difference is the impact resistant material is stronger on the Superguard model.
view full answer...

Are Fender Flares Available For 2002 Ford Escape XLS
At this time fender flares for a 2002 Ford Escape XLS are not available from our supplier.
view full answer...

Will the EGR Superguard 3D Carbon Look Bug Shield Fit On a 2004 GMC 2500 HD
I spoke to my contact EGR and found that the EGR Superguard 3D Carbon Look Bug Shield, item # 204160, fits the 1997 Jeep Cherokee and will not work on your 2004 GMC 2500 HD pickup. I have posted a link below to the bug shields that we currently have available for your truck. The EGR Superguard Bug Shield Hood Protector, item # 301621, is the premium bug shield offered by EGR and has a smoked finish. This bug shield is thicker and stands taller than most providing better protection. The EGR A
view full answer...

Contact and Help

What our customers are saying:

Excellent Service, Excellent Product - I wrote to customer service prior to placing my order because I had a question regarding the differences in two products. I purchased the recommended one, and am thrilled! It got here very quickly, was easy to install, looks great, and I can't wait to try it out!

Deborah

Gulfport, MS

Order Tracking
Shipping Information
Contact Us
About Us

Help Videos and Articles
Search
Privacy Policy
Your Account Login

Air Deflectors

Bug Shield

EGR Reviews and Installation Videos