Diversi-Tech

Expert Answers about Diversi-Tech

• Availability of Disc-Style Padlocks that Can be Keyed Alike
• Only the 3 locks in the 3-pack of locks, # 40122KA3PK, will be keyed alike. This set cannot be keyed alike to match other locks or lock sets. I have included a link to a video review of these locks for you. What you can do if you needed more than 3 locks keyed alike is to use part # DT40124KA. Just select how many you need in the quantity box and they will arrive all keyed alike.
  view full answer...


• Is the Diversi-Tech Ball Mount # DTALBM6400-3S Strong Enough for Construction Work
• The Self-Locking, Adjustable, Aluminum Ball Mount, # DTALBM6400-3S, has a maximum capacity of 12,000 pounds when using the 2-5/16 inch diameter ball, 10,000 pounds with the 2 inch ball, and 2,000 pounds with the 1-7/8 inch ball. The unit is solid aluminum and very strong and dense. If you are towing items within the capacities listed above, I have no doubt this ball mount will perform well.
  view full answer...


• Will Diversi-Tech Coupler Lock # DT25013KA Fit 2 Inch Bulldog Coupler On Horse Trailer
• The Diversi-Tech Coupler Lock, part # DT25013KA, will fit the standard coupler type with a 1-7/8 inch, 2 inch and 2-5/16 inch ball size or the collar lock type that is more pointed at the end. If your coupler has a large lip around the outside where the lock would attach then you will need to measure the width of the coupler from side to side to make sure the width is less than 4-1/2 inches for the Diversi-Tech lock to work. If you look at the product page for the Diversi-Tech lock, it wil
  view full answer...


• What is the Diversi-Tech Universal Trailer Coupler Lock Made Of
• I spoke directly with Diversi-Tech about the Universal Trailer Coupler Lock, # DT25013KA. He stated that this lock is made of high pressure cast aluminum for the housing. The bar has triple chrome plating over steel. And the internal parts are steel. So there is steel all around the lock and chrome plating over that. The body itself is not made only of cast steel but many of the parts inside are.
  view full answer...


• Welding Diversi-Tech Puck Lock Part # DT39002 In Place
• I spoke with one of our friends in the Tech Services Department at Diversi-Tech, who tells me it is possible to weld their puck lock, part # DT39002 in place. He went on to say that the puck itself is chrome plated steel. The plating would need to be ground off of the surfaces to be welded. The welds themselves should be done slowly, in a stitch pattern so that the puck did not heat up too much.
  view full answer...


• What is the Difference Between Diversi-Tech Lock for Hasp/Latch Closures # DT39002 and # DT39002KA
• The only difference between the Diversi-Tech Lock for Hasp and Latch Closures, # DT39002 and # DT39002KA is the keyed alike option. Part # DT39002KA indicates that if you were to order more than 1 of this part number, all of the locks would be keyed the same. If you ordered more than 1 of part # DT39002 all of the locks would be keyed differently.
  view full answer...


• How Well Do the Locking Mechanisms Stand Up in the Diversi-Tech Aluminum Ball Mounts
• We have not had any complaints regarding the Self-Locking, Aluminum Ball Mount, # DTALBM6625, locking up or freezing. Sometimes you may need to lift up on or jostle the ball mount to take pressure off of it so it is easier to turn the key. You can also use some standard spray lubricant in the locking mechanisms to keep it in good working condition. You can check out the customer reviews on the product page. I have also included a link to a video review for you.
  view full answer...


• How to Measure the Receiver Hitch Opening on a 2007 GMC Denali AWD for Drawbar Selection
• Yes, when measuring the hitch opening on your 2007 GMC Denali AWD, you will want to measure the inside dimension of the hitch opening. I have provided a link to information on measuring your hitch opening and selecting a ball mount for you to review. The Self-Locking Adjustable Aluminum Ball Mount, # DTALBM7000, with up to 11 inch rise or 10 inch drop, is designed to fit in a 2 inch receiver opening and would work on your Denali. This ball mount has a deep drop and tall rise for your vehicle
  view full answer...


• Can Diversi-Tech Universal Trailer Coupler Locks be Keyed Alike to Match an Existing Lock
• The Maximum Security Universal Trailer Coupler Lock, # DT25013KA, are keyed alike no matter how many you need. The KA at the end of the part number indicates that these locks are the keyed alike model. If you need 3, just put 3 in the quantity box and they will all be keyed alike. In order to get the locks keyed alike to match one you already have, a special order would have to be placed through Diversi-Tech. The easiest way to do that would be to place your order through a customer service r
  view full answer...


• Will the Diversi-Tech Lock # DT25013 Secure to a Bulldog Collar-Lok Style Coupler
• We have not had any issues with the Maximum Security Universal Trailer Coupler Lock # DT25013 being used on 2-5/16 coupler on Bulldog Collar-Lok style couplers. I pulled a # DT25013 and a Bulldog Collar-Lok Coupler for 2-5/16 inch Balls # BD028630 and was able to install the lock on the coupler and found that the fit was pretty tight and was very secure. I attached a couple pictures of the lock on the coupler for you to check out also.
  view full answer...


• Adjustable Ball Mount Recommendation for a Ford F-350 Pickup
• The adjustable ball mount you will need will depend on the height of the top of the hitch opening on your F-350 with 2-1/2 inch receiver hitch. We have an article that explains how to measure to select the correct ball mount, see link. For instance, on my 2004 Dodge Ram 2500 the top of the receiver opening is 20 inches from the ground when parked on a level surface. I use an adjustable drop receiver at 5 inches of drop, top of receiver opening to top of ball mount, for towing a equipment trai
  view full answer...


• Can the Diversi-Tech Ball Mount # DTSTBM6600 Be Used in the Rise Position
• I spoke with my contact at Diversi-Tech and she informed me that you can absolutely use this Diversi-Tech Ball Mount # DTSTBM6600 in the rise position. I asked her about how you saw something in the paperwork that said not invert the ball mount and she was unsure what I was referring to, but she assured me that you can use this # DTSTBM6600 in the rise position. I have pulled a couple of these ball mounts from our warehouse and I will agree, these are much too pretty to scratch up.
  view full answer...


• Recommendation for a Pad Lock that Will Accept 1/2 Inch Diameter U-bolt
• I went out to the warehouse and pulled a Hasp and Hatch Lock, # DT39002, to measure it. This lock will accept a 1/2 inch diameter u-bolt, but the overall width of the bolt cannot exceed 1-11/16 inches. Something like a Disc Padlock, # DT40124, may be a better option. We also have the Master Lock Shrouded Padlock, # 37DAT, that may work for your application.
  view full answer...


• Recommendation for an Adjustable Ball Mount on a 2004 Chevy Tahoe Z71 with Factory Tow Package
• I offer adjustable ball mounts for a 2-1/2 hitch, but I would recommend to check the size of the hitch on your 2004 Chevrolet Tahoe Z71 with the factory installed tow package. The 2-1/2 inch size hitch would be a Class V hitch that would be rated to tow at least 14,000 lbs. I do not offer a hitch with a 2-1/2 inch opening for a 2004 Chevrolet Tahoe Z71. To check the size of your factory hitch you will just need to measure the inside of the opening of the hitch on your vehicle. The more comm
  view full answer...


• Ball Mount Recommendations for Towing a Trailer with Multiple Vehicles Requiring Different Drops
• You are on the right track for picking out the correct ball mount. Between the Self-Locking Adjustable Aluminum Ball Mount, part # DTALBM6400, and the Self-Locking Adjustable Aluminum Ball Mount, part # DTALBM6600, I believe that you would be better off with the # DTALBM6400. As it could do both the 1 inch and 5 inch drop and would not be be excessively longer than you need. The # DTALBM6600 would work in that regard, but it would be a little longer than you would need so the # DTALBM6400 wou
  view full answer...


• Is a Diversi-Tech Solid-Tow Aluminum Ball Mount Available With 2 Inch and 1-7/8 Inch Balls
• Yes, we have a product like this available from Diversi-Tech, it is the Solid-Tow Adjustable Aluminum Ball Mount, part # DTSTBM6807, which has a 2 inch and 1-7/8 inch hitch ball. This ball mount is adjustable to give you up to a 9 inch rise or an 8 inch drop and it is compatible with 2 inch receivers. To secure part # DTSTBM6807 to your hitch, you may be interested in the Trailer Hitch Receiver Lock, part # 40107.
  view full answer...


• Can The Hitch Balls Of Diversi-Tech Ball Mount # DTALBM6825 Be Replaced
• I contacted our representative at Diversi-Tech about the item you selected, Diversi-Tech Ball Mount, part # DTALBM6825, which is the self-locking series. The representative informed me that it is recommended to send in part # DTALBM6825 in the event the hitch balls need to be replaced. He also informed me that with the Solid-Tow series, like the Adjustable Solid-Tow Aluminum Ball Mount, part # DTSTBM6600, allows you to replace the hitch ball on your own, by using included Allen Key. To rep
  view full answer...


• Is Diversi-Tech Adjustable Trailer Ball Mount, # DTALBM6600 Corrosion Resistant
• The body of the Diversi-Tech Adjustable Ball Mount, # DTALBM6600, is made from aircraft-grade high-strength polished billet aluminum, which is naturally corrosion resistant and would be excellent for salt water marine applications. The integrated hitch pins are made from O-ring-sealed stainless-steel which is also corrosion resistant. The balls are chrome-plated which is not the most corrosion resistant material but they are durable when compared to zinc and aluminum balls. For the balls, I
  view full answer...


• Will Rock Tamers or Roadwing Removable Mud Flaps Fit Ball Mount, # DTALBM6600, 2002 Ford F-250
• I went out to the warehouse and measured the Self-Locking Adjustable Aluminum Ball Mount, # DTALBM6600, so you would be able to determine if you would be able to mount your Rock Tamers or another mud flap product, like the Roadmaster Roadwing Removable Mud Flaps, # RM-44000. From the center of the hitch pin hole to the end of the shank (just prior to the curved portion) it measures 3-3/16 inches. You will need to measure from the center of your hitch pin hole back to the face of the trailer h
  view full answer...


• What are the Dimensions for the Diversi-Tech Aluminum Trailer Hitch Ball Mount, # DTBM5400
• I went out to the warehouse and pulled a Aluminum Trailer Hitch Ball Mount, # DTBM5400, to take some measurements. The distance from the center of the hitch pin hole to the anti-rattle ball bearings on the top of the shank measures 1-7/8 inches. The overall length is 11-1/4 inches. And from the back of the shank to where it starts to slope down measures 5-3/8 inches. I have taken a few other measurements which can be seen in the image to the right.
  view full answer...


• Distance From Hitch Pin Hole Center To Back Of Ball Mount On Diversi-Tech Ball Mount # DTBM5200
• I went out to the warehouse and measured the Diversi-Tech Ball Mount, part # DTBM5200. The distance from the center of the hitch pin hole to the back end of the ball mount is 1-13/16 inches. The back end of the ball mount does have an angle to it, so I measured to the part that is the farthest back from the hitch pin hole. I am including a picture of the ball mount and where I measured. That measurement can vary between ball mounts because on most trailer hitch applications the hitch receiver
  view full answer...


• Aluminum Ball Mount Selection For 2005 Jeep Liberty
• A difference in length of your hitch, or ball mount will effect the clearance from the trailer to the rear of your Jeep Liberty. What you would want to do is measure the clearance needed on your Jeep Liberty. To measure the clearance needed, you will want to measure from the center of the hitch pin hole out 8-1/4 Inches. This will be the location of your hitch ball. Then what you can do is move your trailer and position the coupler to that approximate location to see if there will be any issues
  view full answer...


• Troubleshooting Excessive Movement After Towing with Adjustable Aluminum Ball Mount # DTALBM7000
• I spoke with my contact at Diversi-Tech regarding the problem you are having with the Self-Locking Adjustable Aluminum Ball Mount, # DTALBM7000. There are a couple of things that may be causing the slop you are experiencing in the ball mount. First, if any sand or other find debris finds its way under those ball bearings on the top of the shank, that could cause them to not pop up all the way. What you can do is push them in and clean them with a small fine bristle brush to remove the debris
  view full answer...


• Can the Balls be Changed Out for Other Sizes on Diversi-Tech Adjustable Ball Mount # DTSTBM6400
• We do have some available options in terms of adjustable ball mounts that do have a 1-7/8 inch and 2 inch ball. Take a look at the Rapid Hitch Adjustable, Aluminum Ball Mount Kit, # AM3411. This model has an 8,000 pound capacity with a 5-1/2 inch drop or 6-1/2 inch rise. Additional ball sizes are available like # AM3451 which has a 2-5/16 inch diameter. The main difference between this ball mount and the Diversi-Tech is that the Diversi-Tech models included an integrated locking system. We a
  view full answer...


• Drawbar Neck Length on a Self-Locking Adjustable Aluminum Ball Mount, Part # DTALBM7000
• I called my contact at Diversi- Tech to get the measurements for the Self-Locking Adjustable Aluminum Ball Mount, 2 Balls, Up to 11 inch Rise or 10 inch part # DTALBM7000, you referenced and was able to come up with the following measurements. The total length of neck on the shank is 13 inches. The length of the portion of the neck that actually hangs lower than the center of the hitch pin is 11-5/8 inches. If you were to have the ball in the lowest position to where the lower ball not
  view full answer...


• Locking Pin Diameter on Diversi-Tech Adjustable Self-Locking Aluminum Ball Mount Part # DTALBM6600
• The locking pins on the Diversi-Tech Adjustable Self-Locking Aluminum Ball Mount, part # DTALBM6600 measure 5/8 or .625 inch in diameter, the same as a standard hitch pin for a Class III or higher Receiver Hitch.
  view full answer...


• Comparison of the Diversi-Tech Puck-Style Guard Lock and the Master Lock Hidden Shackle Padlock
• The differences between the Diversi-Tech Hasp and Hatch Puck-Style Guard Lock, item # DT39002, and the Master Lock Hidden Shackle Padlock, item # 970DPF, are small. Both are quality products. The biggest difference, security wise, is that the Diversi-Tech lock has a hasp that is 3/16 inch larger in diameter than the Master Lock padlock, and the Diversi-Tech lock has a slightly larger opening for a hasp to fit into. I have a set of Diversi-Tech padlocks and they are very well constructed, s
  view full answer...


• What To Do If Key For Lock Is Missing On Diversi-Tech Ball Mount
• Without the key or the key number you will need to remove the locks that are on your Diversi-Tech ball mount and replace them with Diversi-Tech 2-Pack Re-Keying Kit, # DTLBM02RK. This kit will have 2 keyed-alike lock cylinders with 4 keys and lock covers. It will also include 2 set screws and an allen wrench. On the Diversi-Tech ball mount there will be a set screw that is located under the warning label on top of the hitch. If you lift up the warning label there will be a hole with a set scr
  view full answer...


• Can the Balls on the Adjustable Ball Mount, # DTALBM6600 Be Removed and Does it Screw Into Place
• I went out to the warehouse and pulled a Self-Locking Adjustable Aluminum Ball Mount, # DTALBM6600. The balls are locked into position whether or not the unit is locked and they cannot be removed easily. They do not simply screw into place. They are held in place by an internal pin that is not accessible from the outside.
  view full answer...


• How To Install The Replacement Locking Cylinders, # DTLBM02RK, On The Diversi-Tech Ball Mounts
• To install the Diversi-Tech Replacement Locking Cylinders, # DTLBM02RK, on a locking Diversi-Tech ball mount, the opening to get to the set screw is located under the warning label that is on the top of the hitch. I called the supplier (Diversi-Tech) and they recommended when installing the replacement locks to first put some air tool oil in the hole where the set screw is located and let set for awhile. This will help break up the threadlock that secures the set screw in the ballmount.
  view full answer...