DeWalt Contractor

Expert Answers about DeWalt Contractor

• Which Toolboxes Will Fit a 2010 Nissan Titan
• The DeWalt boxes you are referring to are the gullwing style boxes like # DIGSTG70. However, for your 2010 Nissan Titan, there are no low profile boxes with this design. They will all have the standard 4 to 5 inch height above the truck bed rails. I have included a link to all of the tool box options for your truck. Just click on the appropriate cab type to see the available options.
  view full answer...


• Will the DeWalt Truck Bed Toolboxes Keep Out Dust and Snow
• I contacted our representative at Thule about the DeWalt Toolboxes. She informed me that the boxes should keep out dust, dirt and snow as the boxes have a foam seal on the lid. I produced a short video showing this seal. If you can send me the year, make and model of you truck I would be glad to recommend a toolbox that will fit your truck.
  view full answer...


• Dewalt Contractor Series Truck Bed Toolbox Recommendation for a 2001 Toyota Tacoma Reg Cab
• As long as your 2001 Toyota Tacoma regular cab does not have a step side this DeWalt Contractor Series Toolbox # DCS62LP would work for you as it has been confirmed to fit your vehicle. If you have a step side the # DCS62LP would not work for you. I attached a link to a page that has all of the different boxes that would work if you have a step side.
  view full answer...


• Will a Dewalt Contractor Toolbox Fit a 2004 Toyota Tacoma
• The Dewalt Toolbox, # DCS62LPB, will only fit a Regular Cab, excluding stepside 2004 Toyota Tacoma. To be certain, you can view the measurements of the box on the product page and compare those to the area in your truck. The toolbox will install using j-bolts that are included. I have included a link to a video that shows a typical toolbox installation for you.
  view full answer...


• Adarac Custom Truck Bed Ladder Rack Recommendation for 1999 Ford F250 with a Shortbed and Tool Box
• Since you have the tool box in the bed of your 1999 Ford F250 I would recommend you get an Adarac Custom Truck Bed Ladder Rack # A70505. This rack mounts on the top of the bed rails and should not interfere with your tool box as long as it is not bed-rail-mounted or stake-pocket-mounted and should provide you with plenty of storage space. I attached installation instructions for this product for you to check out also. You may also be interested in purchasing Retractable Ratchet Straps # 11
  view full answer...


• Is the Finish Smooth on the DeWalt Truck Bed Toolbox - White # DCSTS70 and Can it be Painted
• The DeWalt Contractor Series Truck Bed Toolbox - Crossover Style - White, part # DCSTS70, will fit a 2007 Toyota Tundra Double Cab, or CrewMax Cab. It will not fit a regular cab model. If you have a regular cab Tundra I would have the UWS Truck Bed Toolbox - Deep Crossover Style - White, part # UWS07270. This will be a similar style to the DeWalt toolbox you have referenced. DeWalt does not have a toolbox for the Tundra regular cab model. I spoke with my contact at DeWalt and they said tha
  view full answer...


• Availability of a Ladder Rack for a 2011 Ford Super Duty with a Camper Shell
• There is actually a specially designed ladder rack designed for use on truck bed camper shells. Take a look at the TracRac CapRac Ladder Rack, # TA29200. Installation does require drilling into the camper shell. I have included a link to the installation details for you to view. An adapter for the DeWalt Contractor Adjustable Aluminum Truck Rack, # DCAAR422XT, is not available.
  view full answer...


• Tool Box Recommendations for 2011 Ford F-150 Super Crew with a 5.5 foot bed
• I spoke with my contact at the manufacturer of the Dewalt and UWS tool boxes we sell and she recommended the following toolboxes for your 2011 Ford F-150 Super Crew with a 5.5 foot bed. UWS Tool Box # UWS00026 UWS Tool Box # UWS00056 UWS Tool Box # UWS00112 UWS Tool Box # UWS00161 The Dewalt Box # DCSD70LPB that you referenced is not a confirmed fit for your vehicle I and I would not recommend it for you.
  view full answer...


• Yakima Ladder Rack # Y01137-Y00410 Recommend for 2003 Chevy Silverado Short Bed Composite Box
• There might be a chance you can put a ladder rack on your 2003 Chevy Silverado 1500 but I spoke with my contact at DeWalt and she informed me that you could not install a DeWalt Contractor Steel Ladder Rack, part # DCSLR760, onto your vehicle because of the composite box. I spoke to my contact at Yakima and she informed me that if you can put your hand under the rail and find a place to install the J-hooks of a Yakima Outdoorsman 300 Ladder Rack, part # Y01137-Y00410, then you could use this
  view full answer...


• Fit of DeWalt Adjustable Ladder Rack Part # DCAAR422XT on 2011 Ford F150
• According to my contacts with the manufacturer, the DeWalt Contractor Adjustable Ladder Rack will fit your 2011 F150 unless it is a step or flare sided bed.
  view full answer...


• Availablility of an Adapter Kit for Dewalt Ladder Racks for a 2001 Chevy Express Van
• We have 2 different adapter kits designed for use with Dewalt Ladder Racks and your 2001 Chevy Express Van. First, we have Adapter Kit for DeWalt Contractor 2-Bar, Steel Van Rack - 4 Brackets, # DCAK706, designed for use with the DeWalt Contractor Steel Van Rack, # DCSVR701. If your van does not have an interior headliner, you will need Adapter Kit, # DCAK705. This kit is also designed for use with the DeWalt Contractor Steel Van Rack, # DCSVR701. I have also included a link to all of the Dew
  view full answer...


• Will the Dewalt Contractor Series Tool Box # DCS62LPB fit in a 2011 Nissan Frontier
• Yes, the DeWalt Contractor Series Truck Bed Toolbox, part # DCS62LPB, will fit your 2011 Nissan Frontier that has a King Cab.
  view full answer...


• Toolbox Recommendation for a 2010 Toyota Tacoma Prerunner Access Cab
• At this time we do not have any confirmed fit double lid boxes for your 2010 Toyota Tacoma Prerunner with an Access cab. If a single lid box would work for you I would recommend you get a UWS Toolbox, part # UWS00420. If you were to measure you truck bed and found that the Dewalt Truck Box, part # DCS62LPB, would work you might be able to use it. The measurements are pretty similar to the boxes that do fit your truck. It seems that the biggest issue would be that the Dewalt tool box doe
  view full answer...


• Does The Dewalt Toolbox # DCS62LP Attach With J-Bolts To A 2010 Toyota Tacoma And Are They Included
• The Dewalt Contractor Toolbox, part # DCS62LP, will attach to your 2010 Toyota Tacoma Regular Cab with J-bolts. The J-bolts are included with the toolbox. I am including a link to a video review of a similar Dewalt toolbox. The video will show the J-bolts and how they attach the toolbox to the truck bed rails.
  view full answer...


• Dewalt Tool Box for the 2011 Toyota Tacoma Dual Cab with Long Bed
• The DeWalt Contractor Series Low Profile Crossover Truck Bed Toolbox, item # DCS62LPB, should fit nicely in your truck if it has the long bed. To be sure you should do some measuring before placing and order. As long as the width of your bed between the side rails is longer than 51 inches and less than 62 inches, and the distance from the back of the bed to the wheel well, 11-3/4 inches down from the top of the bed is 17 inches or more the box will fit. If you have a shorter bed this box w
  view full answer...


• Dimensions of DeWalt Contractor Series Truck Bed Toolbox, # DCSD70B
• The drawing used is just a generic one used to show basic dimensions of the tool box, # DCSD70B, so you are correct in that it is not the same shape as the actual box. On each side of the box, the top portion of the box that sits on the sides of the truck bed measure 7 inches from the end to the body of the box. Large items like tool boxes ship via truck freight so additional shipping charges will apply if stated on the product page. You can find this information below the Shipping Special bo
  view full answer...


• Will DeWalt Contractor Toolbox, # DCSD62LP Fit a 2010 Ford Ranger Short Bed and How Does it Mount
• The DeWalt Contractor Toolbox, # DCSD62LP, is designed to fit the 2010 Ford Ranger short bed (6 foot bed). It will also fit the Edge model with a short bed. Installation is very simple. The box installs in the bed of the truck using J-bolt hardware included with the box. I have included a video below that shows a typical installation of a tool box.
  view full answer...


• Will DeWalt Contractor Series Truck Bed Tool Box DCS62LPB Overhang the bed Rails of a 1996 Ranger
• The DCS62LPB should work just fine. The ears of the box, for lack of a better term, are at least 5-1/2 inches, more if you take the lid into account. Measure your truck bed. Overall width of the box, minus the lid, is 62 inches. If this is more than the width of the box across the rails, then you may have some overhang.
  view full answer...


• Recommend Black Aluminum Toolbox and How to Install on 2010 Toyota Tacoma 4-Door
• We do have a toolbox that will fit your 2010 Toyota Tacoma, but the item you selected, DeWalt Contractor Series Truck Bed Toolbox, part # DCS62LPB is not an exact fit. A toolbox that is similar and will fit your 2010 Toyota Tacoma 4-door is the UWS Truck Bed Toolbox, # UWS00404. This box is 7.6 cubic feet, slightly larger than the box you referenced, and it has a bottom that is more narrow for a better fit for your truck. The toolbox installs using included J-bolt hardware. I have included a
  view full answer...


• Is There a Tool Box That Will Fit a 2006 Dodge Ram Crew Cab Short Bed
• Take a look at the UWS Toolbox, # UWS00431. This box is 12 inches wide at the top and 9-3/4 inches wide at the bottom, so it will fit in that 14 space between the wheel well and the front of the bed on your 2006 Dodge Ram Crew Cab, short bed. Its not the biggest box at 4 cubic feet, but it will fit. We also have the slightly larger (6.7 cubic feet) UWS Toolbox, # UWS00433. This box has the same width dimensions as the box above so it, too, will fit.
  view full answer...


• Are Parts Available for Locking My Tool Box on My 1995 Toyota 4x4
• If you could send us a picture of the inside and outside of the lock you are trying to replace then I may be able to come up with a replacement for you. I will also need to know if there are two locks on the box or just one so that if there are two we can get them keyed alike. We do have some replacements that may work, check out the UWS Locking Cylinder for Square Paddle Handle Toolboxes, item # UWSLOCKCYLINDER. We also have the UWS Replacement Twist Latch for Tote Box, item # UWSTWISTLOC
  view full answer...


• Fit of DeWalt Contractor Toolbox Part # DCS62LPB on 2008 Toyota Tacoma
• Assuming that your Tacoma is the Regular Cab, the DeWalt Truck Tool Box, part # DCS62LPB will fit your Truck.
  view full answer...


• What Crossover Truck Bed Tool Boxes will Fit a 2007 Toyota Tacoma
• At this time DeWalt only has boxes available for standard cab model Tacomas. However we do have tool boxes from UWS that will fit a 2007 Toyota Tacoma Double Cab or Quad Cab. There are 5 UWS tool boxes available, I have provided a link to all of them below. The one closest in size to the DeWalt Box you were looking at is part # UWS00402 with 7.6 Cubic Feet of space. I have also added a link to a UWS box, part # UWS00109, for a Ford F-150 so you can see more pictures of a UWS box.
  view full answer...


• Are DeWalt Boxes Available in Black for a 2008 Chevy Silverado
• There are black versions available for almost all the boxes. The box you were looking at, part # DCS70, is also available in black. Use instead, part # DCS70B.
  view full answer...


• Is the DeWalt Contractor Series Truck Bed Toolbox # DCSD70LP - F250 Compatible
• Yes, the DeWalt Contractor Series Truck Bed Toolbox, item # DCSD70LP, will fit in the full size Ford Pickups 1987 and newer.
  view full answer...