DWD Plastics

Expert Answers about DWD Plastics

• Availability of Front License Plate Frame to Fit a 2012 Dodge Ram 1500
• The Dodge Stainless Steel License Plate Frame, part # 700638, has two mounting holes on the bottom of the frame. When I checked out pictures of the 2012 Dodge Ram 1500 it showed two mounting holes for a license plate frame at the top edge of the bumper. If you used this license plate frame on your truck you would have to mount the frame using the bottom holes which would cause the frame to stick up above the bumper, which I would not recommend. If your Ram has the mounting holes in a diff
  view full answer...


• Availability of Blank Square or Round 2 Inch Trailer Hitch Covers
• For a square trailer hitch cover for 2 inch receivers, we have the Rubber Tube Cover, # I-728. We do not have any round covers that are blank. Besides the Blank Trailer Hitch Cover, # TTBLANK2, and # I-728, we do not have other square or rectangular blank covers.
  view full answer...


• Availability of Dove and Cross Hitch Cover for 1-1/4 Inch Trailer Hitch
• The Dove and Cross Trailer Hitch Cover for 1-1/4 Inch Hitches, part # 100315, is for 1-1/4 inch hitches and is the same hitch cover as the Dove and Cross Trailer Hitch Receiver Cover for 2 Inch Hitches, part # 200312, you have referenced. I am also including a link to a product page that will show all of the religious 1-1/4 inch hitch covers I have available.
  view full answer...


• DWD Silver Bowtie Trailer Hitch Cover Dimensions
• I went out into our warehouse and pulled a Chevy Hitch Cover part # 20037 to measure how tall and wide the cover is and found that it is 5-3/16 inches in width and 3-15/16 inches in height. Check out the video I attached that shows these measurements. You may also be interested in purchasing a Trailer Hitch Receiver Lock # 7683 as a theft deterrent for this hitch cover. I attached a review video for this product also.
  view full answer...


• Will the Infinity License Plate Fit on a Infinity G37 S
• Yes, the Infiniti Ebony Chrome Finished Stainless Steel License Plate, item # 311179, should fit your Infiniti g37 S. To be sure that the vehicle manufacturer uses standard license plate mounting dimensions you should measure. I have posted a photo with the measurements you will need to take at the right. The mounting holes should measure 7 inches on center wide by 4-11/16 inches on center high. You may also be interested in the Mounting Hardware and Snap Caps for DWD License Plates, item
  view full answer...


• Does The DWD Stainless Steel License Plate # 312565 Have A Mirror Finish
• I walked out to our warehouse and pulled the DWD Stainless Steel License Plate # 312565, from our warehouse. Part # 312565 does have a mirror finish and I could see myself in the license plate. I have linked the page showing all of our Silverado license plates.
  view full answer...


• What Are The Dimensions Of Standard License Plate Holes On The Front Of A Vehicle
• The dimension of the mounting holes on the DWD Stainless Steel License Plate Navigator Chrome, part # 303037, is 7 inches (right to left) from center of one mounting hole to the center of the other mounting hole. It measures 4-11/16 inches (top to bottom) from the center of the top mounting hole to the center of the bottom mounting hole. These are standard license plate hole dimensions used on most vehicles in the United States. The size of the elongated holes on the license plate is 5/8 inch
  view full answer...


• What Material Is The DWD Infiniti License Plate # 311162 Made Of
• I contacted our representative at DWD about the DWD Plastics Infiniti License Plate, part # 311162. Our representative at DWD informed me that the Infiniti logo is made of plastic and covered in chrome just like the manufacturer logos are. There is not a license plate available that just has the Infiniti symbol. Our representative informed me that Infiniti requires that DWD produce the plates with the logo and the name. The Infiniti symbol is attached to the plate using automotive doub
  view full answer...


• Is A License Plate Available That Has Chevrolet Bowtie Logo With Trailblazer Underneath The Logo
• I have the DWD Ebony Finish Stainless Steel License Plate Trailblazer with Chrome Chevy Logo, part # 313166. This is the Chevrolet logo with Trailblazer underneath. I am also sending you a link to a page of all of the Trailblazer license plates that I have available.
  view full answer...


• Will the DWD Snap Cap and Hardware kit # 900014 work on Standard Sized License Plate Covers
• Yes, the Mounting Hardware and Snap Caps for DWD License Plates and License Plate Frames, part # 900014, is for use on standard size license plates. DWD is the brand that manufactures this product, they also manufacture license plate covers, such as the Impala Stainless Steel License Plate Frame, part # 700737. When you install these you will put the screw through the plastic washer with the lip opening towards the head of the screw. When installed correctly the lip of the washer will go
  view full answer...


• Will the Ebony Finish, Stainless Steel Saturn License Plate Fit on a 2008 Saturn Aura XR
• I spoke with my contact at DWD about the Ebony Finish, Stainless Steel Saturn License Plate, # 312923, for your 2008 Saturn Aura XR. She stated that the plate measures 12 inches long and 6 inches high, and is about 3/8 inches thick.
  view full answer...


• Size of Opening in the Alabama Alumni License Plate Frame
• I am sorry but the opening on the Crimson Tide License plate frame that we carry is just a bit smaller than the one you currently have. Our opening is 11-1/4 inches wide by 4 inches high in the center and on the outside ends it goes up to 4-3/4 inches for about 1 inch. The overall size is slightly larger at 12.25 by 6.25. At this time we do not have a license plate frame for Alabama that has a larger opening.
  view full answer...


• What Color is Ford Emblem on DWD Stainless Steel Ford Logo License Plate
• The plate itself is stainless steel and is silver; the Ford emblem is blue and silver just like the badges on their vehicles.
  view full answer...


• License Plate with Red Chevrolet Logo is in 3-D
• The Stainless Steel License Plate Red Chevrolet Logo Chrome, part # 300678, is three dimensional.
  view full answer...


• Stainless Steel License Plate with 3-D Ford Logo
• Yes, the Stainless Steel F150 License Plate with Ford Logo, part # 308391 has raised 3-D Logos.
  view full answer...


• Stainless Steel License Plate Mounting Holes are Standard Mounting Dimensions
• The Navigator Stainless License plate, item # 303037, has the same mounting holes as every standard license plate. It will fit your vehicle.
  view full answer...