See What Fits Your Vehicle
customer service | view cart  View Cart
BedRug Cargo Van Mats
BedRug Truck Bed Mats

BedRug Full Bed Mats
BedRug BedTred Liners

BedRug





BedRug Reviews and Installation Videos


Expert Answers about BedRug

  • How Does the BedRug Custom Truck Bed Liner Handle Wet Weather
  • The BedRug Custom Truck Bed Liner # BRQ09SCSGK that you referenced should withstand wet weather very well. It is not designed to absorb water, instead it lets water drain right through it drying quickly. The water would basically drain out of the truck bed just as it would without the liner installed. Check out the review video and installation instructions I attached for this product also.
    view full answer...

  • Can the BedRug Custom Truck Bed Mat be Cut for 5th Wheel Base Rails in the Truck Bed
  • Yes, you can cut the BedRug Custom Truck Bed Mat, # BMQ99LBS, to expose your fifth wheel base rails that are bolted to your truck bed. I spoke with my contact at BedRug and she told me that they recommend cutting out slots for fifth wheel base rails if you intend on keeping them mounted in the truck bed.
    view full answer...

  • Is the VanTred Custom Floor Mat # VTRF92 Waterproof
  • The 1/2 inch thick backing on the BedRug mat, # VTRF92, is made of closed-cell foam polypropylene that is waterproof so it will not pick up moisture. It will not make the rusting that has already started worse because it does not hold moisture. However, since moisture will not get held in the mat you will want to make sure that if there are liquid spills that get under the mat that you dry them up. I included a video review video link from the manufacturer talking about their products.
    view full answer...

  • Does the Carpet Need to Be Removed To Install the VanTred Floor Mat on a 2013 Chevrolet Express Van
  • I spoke with my contact at Bedrug and she stated that the carpet will need to be removed to install the VanTred Floor Mat. The VanTred mat is ribbed to fit the metal floor of your 2013 Chevrolet Express Van and will install using the plastic OEM shrouds and the rear and side entry doors. The mat will not fit properly if it were installed over the carpet. The VanTred Floor Mat, # VTRG96X, that you referenced was designed to fit the extended wheelbase models of the Express Van. If you have a s
    view full answer...

  • Will the BedRug Truck Bed Liner fit a 2012 Nissan Frontier with a Utili-Track and Spray In Bedliner
  • Yes, I spoke with my contact at BedRug and she informed me that this BedRug Custom Truck Bed Liner # BRN05CCK will work on your 2012 Nissan Frontier with a spray-in bed liner and Utili-Track tie down system. Check out the installation instructions I attached for this product also.
    view full answer...

  • Can the DeeZee Custom Bed Mat # BMQ99SBS Fit Around Fifth Wheel Mounting Rails in Truck Bed
  • The DeeZee bed mat you mention, part # BMQ99SBS can indeed be trimmed to fit around your fifth wheel mounting rails. You will need to make sure that the rails are still in direct metal-to-metal contact with the truck bed or spray in bed liner.
    view full answer...

  • Using BedRug Universal Fit Bed Mat on 1997 Ford F350 Long Bed without Bed Liner
  • The BedRug Universal Truck Bed Mat you referenced, part # BMX00D is meant to be used with a drop-in bed liner, because the drop in liner provides the attachment point to the truck (see diagram on the product description page). The folks at BedRug tell me that if the mat is used with a camper shell, there would be no danger of the mat flying out while driving down the highway and would work fine for you. You could use hook and loop fasteners to keep the mat from sliding around, if so desired.
    view full answer...

  • Does BedRug Cargo Van Mat # VTRG96X Cover the Front Floor on a 2004 Chevy Express Van
  • For the 2004 Chevy Express Van, the only available Van Tred options go as far up as the back of the rear seats.A second piece or one long piece that covers the front is not available. When looking at the Van Tred options, linked for reference, be sure to note whether the part you want is for a standard wheel base or the extended wheel base. The # VTRG96X Van Tred is made for the extended wheel base. I have included a link to a video for the Van Tred as well.
    view full answer...

  • Compatibility of VanRug Custom Floor Mat Part # VRTC10 for 2011 Ford Transit Connect with Rear Seats
  • I have spoken with one of our contacts at Bedrug, the manufacturer of the VanRug for your 2011 Ford Transit Connect. I was told that this particular mat has perforations that correspond to the rear seat latch points. These perforations can easily be cut out if necessary to accommodate rear seats.
    view full answer...

  • Availability of a BedRug Truck Bed Mat for a 2010 Ford F-150 with a 5-1/2 Foot Bed
  • There are actually 2 possible options for BedRug Truck Bed Mats for the 2010 Ford F-150, 5-1/2 foot bed, depending on the options the truck bed has. If your truck has the factory step gate with or without a spray-in bed liner, you will need BedRug Truck Bed Mat, # BRQ09SCSGK. If your 2010 F-150 does NOT has the factory step gate, with or without a spray-in bed liner, you would use # BRQ04SCK. I have included links to the installation details for each BedRug along with a link to a video review
    view full answer...

  • Can a BedRug be Installed over a Line X Spray in Bed Liner ON A 2009 GMC Sierra Crew Cab
  • Installation of the BedRug Custom Truck Bed Liner, over a Line X bed liner, would require that the use of an adhesive promoter. Apply the promoter to the locations on the Line X liner where the hook and loop fasteners must attach to the truck bed. I spoke with my contact at BedRug and their recommendation is for use of 3M adhesive promoter, they stated that this promoter is available at most local hardware stores. For your 2009 GMC Sierra Crew Cab pickup the BedRug # BRY07SBK is not the c
    view full answer...

  • Will the VanTred Custom Floor Mat # VTRG96X Fit in a 2003 Chevrolet Express Van 3500
  • For the 2003 Chevrolet Express Van 3500 there are two options for a VanTred Custom Floor Mat. Part # VTRG96X, is for the Extended version or MaxiVan and part # VTRG96 is for the standard length van. This floor liner provides a non-skid, heavy-duty rubber work surface in your van. There is also the option of the VanRug Custom Floor Mat for your vehicle. If you have the Extended, MaxiVan, version you would use part # VRG96X, and if you have the standard length van you will need part # VRG96. Th
    view full answer...



Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com