If you have an air spring suspension enhancement kit, then an air compressor is a must. These will sense changes in your load and adjust your springs so you always have the best support for your vehicle.

Air Lift Air Hose Cutter

You always need the proper tools to keep your towing vehicle at its best. The air hose cutter will cut the air line tubing for the compressor and air springs for perfect seals.

Air Lift

Accessories and Parts

Tools

Vehicle Suspension

Air Lift Reviews and Installation Videos

Installation of the AirLift 1000 Helper Springs on a 2010 Dodge Caravan

Installation of Air Lift LoadLifter Air Helper Springs on a 2011 GMC Sierra

Installation of Air Lift Ride Control Air Helper Springs on a 2006 Ford F-150

Installation of Air Lift LoadLifter Air Help Springs on a 2004 Ford F-250

Installation of an Air Lift WirelessAIR Compressor System on a 2006 Ford F-150

Installation of Air Lift Ride Control Air Helper Springs on a 2006 Chevrolet Colorado

Expert Answers about Air Lift

Rear Suspension Recommendation for a 2000 Chrysler Town and Country LXI
The two choices that I can recommend that will work on your vehicle are the Timbren # TDVR05096 or the Firestone # F8627. The main difference between them is the feel of the ride. The Timbren is a good, quality product that a lot of truck owners, and some minivan owners have installed. This suspension system creates a level, smooth ride when hauling heavy loads. The Timberns are not adjustable, they reduce the sag when either the trailer is mounted. The Firestone Work-Rite # F8627 also is a g
view full answer...

Suspension Enhancement Options for a 2002 Dodge Ram 2500 With B and W Gooseneck Turnoverball Hitch
The upper bracket for the Air Lift LoadLifter 5000 Air Helper Springs, # AL57215, that you referenced bolts to the outside of the frame rail where the frame brackets of your B and W Turnoverball currently sit. I spoke with B and W and they told me that it was okay to bolt through their frame brackets if you would like to install this air bag kit. At this time we do not offer air springs for your 2002 Dodge Ram 2500 that mount to the underside of the frame rail, but we do offer rubber springs
view full answer...

Will Air Lift AirCell Custom Helper Springs Kit # AL52204 Work On 2004 Dodge 2500
The Air Lift AirCell Custom Helper Springs Kit # AL52204 you referenced will work on your 2004 Dodge 2500 pickup. It prevents sagging and reduces bottoming out as a result of carrying heavy loads, like when towing your fifth wheel. It also helps with problems such as off-center loads, body roll, and sway when turning sharp corners because each spring works independently. This product bolts onto your frame and rear axle and requires no maintenance. It provides a smoother ride than rubber load
view full answer...

Suspension Enhancement for a 2002 Dodge Grand Caravan with Wheelchair Lift
Your local or state laws may have requirements for ride height on a passenger vehicle and you should be able to contact the local DMV or State Troopers office and they should be able to tell you. A vehicle does not ever require a suspension enhancement system and the systems we carry are not lift kits. They help support the suspension and are meant to be installed on a vehicle with factory suspension that is in good working order. Given that your 2002 Dodge Grand Caravan has a wheelchair lift
view full answer...

Suspension Enhancement Recommendation for a 2004 Nissan Pathfinder Armada
For your 2004 Nissan Pathfinder Armada I recommend going with the Firestone Coil-Rite system # F4150. I have included a link to the installation details for you to view. Firestone makes a good quality suspension enhancement system and they also make the air bags for Air Lift. You can install the system as is and use your own air compressor or one at a gas station to fill the bags. Or you can get Level Command II kit, # F2158, which will allow you to add or remove air from the cab of the vehi
view full answer...

Is there Drilling Involved to Install the Air Lift Ride Control Air Helper Springs # AL59530
I checked the installation instructions for the Air Lift Ride Control Air Helper Springs # AL59530 that you referenced and there is drilling into the frame to attach the upper brackets of this kit onto your 2004 Toyota Tundra. I attached a picture that shows where the drilling will take place in the frame. I also attached the installation instructions for this product that shows everything needed to install this product.
view full answer...

Air Lift 1000 Air Helper Springs Recommendation for a 2004 Mercury Sable Sedan
To answer your first question you can either inflate the air bags of the Air Lift AirLift 1000 Air Helper Springs # AL60776 manually with an air compressor via the valve stems that will get installed on your vehicle or you could get a compressor kit like the Air Lift Load Controller II Compressor System # AL25592 and be able to control the inflation of the bags from within your vehicle. You also would be able to monitor the air pressure with this kit. If you decide to not use a compressor kit
view full answer...

Installation Difficulty for AirLift 1000 Rear Helper Springs, part # AL60732, in 2004 Toyota Sienna
To install the AirLift 1000 Rear Helper Springs, part # AL60732, in your 2004 Toyota Sienna you will need to either jack up the rear of the vehicle or raise it on a hoist and support the vehicle frame with safety stands. This is necessary to allow the rear suspension to fully extend for insertion of the helper springs. It is not necessary to dismantle the suspension system. Apart from this you will need only basic tools. Installation consists of slipping the deflated air spring cylinder betwe
view full answer...

Rear Suspension Enhancement For a 2000 Ford Super Duty With a Gooseneck Hitch
The Air Lift LoadLifter 5000, # AL57298, was designed to work with specific gooseneck hitches because it installs on the outboard side of the frame rails on your Ford Super Duty. This kit will fit the 2WD models only. If you can tell me what type of hitch you have in your truck, I can check the compatibility with this kit. This kit will not fit with gooseneck hitches that mount with custom brackets on the outboard side of the frame rails. Another option from Air Lift is the LoadLifter Air He
view full answer...

Compatibility of Air Lift Wireless ONE Compressor with Firestone Air Springs on 2011 Ford F250
The Air Lift Wireless ONE Compressor System you mentioned, part # AL25870 is indeed compatible with the Firestone # F2535 system. I have confirmed this by checking with my Air Lift representative.
view full answer...

Does Air Lift AirCell Custom Rear Helper Spring Kit, Part # AL52204, Have a Specific Weight Rating
My contact at AirLift does not show a specific weight load rating for this product, the AirCell Custom Rear Helper Spring Kit, Part # AL52204. However, he commented that this product is often used on dump trucks and other heavy duty vehicles that routinely carry a heavy load on the rear axle. These are a good choice for your Ram 3500 Dually provided that it is going to be under the load of your trailer at all times. If not loaded by the trailer tongue weight, he cautioned that you might find
view full answer...

Determining Stock Ride Height to Install Air Lift SlamAir Springs # AL59210 on 2010 Ford F150
The Air Lift SlamAir Helper Springs you mentioned, part # AL59210 is intended for vehicles that have been lowered 2 to 6 inches, so as a first step you will need to determine how much your truck has been lowered. The Firestone system you mentioned is not designed for lowered vehicles. I do not have any information about the stock ride height, so your Ford dealer would be the best resource for determining how far from stock ride height you are at this point. My Air Lift representative tells me
view full answer...

Will the Air Lift LoadLifter 5000 Fit on a 2010 Toyota Tundra 4x4 with a 5th Wheel Hitch Installed
The Air Lift LoadLifter 5000 Air Helper Springs, # AL57299, may work with your custom 5th wheel frame brackets, but the fit will depend on how the brackets attach to the frame of your 2010 Toyota Tundra 4x4. The LoadLifter brackets attach to the bottom of the frame and hooks to the inside of the frame and the jounce bumper bracket using clamps (see photo). As long as the brackets for your fifth wheel hitch do not interfere with this location on your vehicle frame, you will have no problem ins
view full answer...

Installation of Air Lift 1000 Air Helper Springs # AL60815 on 2012 Honda Odyssey
To install the Air Lift 1000 Air Helper Springs, part # AL60815, on your 2012 Honda Odyssey, it does require the coil springs to be removed from the vehicle. The rubber jounce bumper that is inside the coil spring will have to be unbolted and removed. Then, the air spring will be installed into the coil spring and the whole coil spring with air spring will be installed back on the vehicle. A hole will need to be drilled in the control arm of the vehicle for the stem of the air spring to fit into
view full answer...

Installation of Air Lift 1000 Helper Springs # AL60809 on 2012 Toyota FJ Cruiser
To install the Air Lift 1000 Helper Springs, part # AL60809 on your 2012 Toyota FJ Cruiser, it does require you to remove the coil springs on the rear of your vehicle To remove the coil springs on your FJ Cruiser you will raise the rear of the vehicle and support the frame with jack stands. Detach the shock absorbers at the lower shock mount. Detach the panhard rod at the lower axle mount. If your vehicle has rear anti-sway bar you may have to disconnect the links. Then, mark the position
view full answer...

Installation of the AirLift Springs on a 2006 Ford Focus Sedan
You will not need any special tools to complete the install of the Air Lift AirLift 1000 Air Helper Springs # AL60723. The installation is pretty straightforward and will only require the drilling of a 5/16 inch hole for installing the inflation/deflation valve. To see exactly what is required to install this product check out the installation instructions that I attached. You will not need to compress your springs to install the air spring, basically you will only need to jack up the rear of
view full answer...

Installation of the Air Lift Air Helper Springs # AL60743 on a 1997 Toyota 4Runner
The large rubber stopper that you see inside of the coil spring on your Toyota 4Runner is a jounce bumpers. The jounce bumpers help absorb some of the shock that the coil springs absorb. Your vehicle may have a large or a small jounce bumper. If you have the small jounce bumper, it will need to be unbolted and it will not be re-installed. If you have a large jounce bumper, Air Lift recommends trimming the bumper as specified in the installation instructions. I have attached a link to the ins
view full answer...

Solution to Eliminate Sag When Towing Ski Boat with 2000 Toyota Tundra
The Air Lift Ride Control Air Helper Spring kit, part # AL59530 is compatible with your current tire size on your Tundra. As air pressure is added to the springs, the rear height of the vehicle would increase slightly. You are correct in your assumption about tire size. This being said, an air spring kit is primarily meant to suspend a load carried in the vehicle. To overcome sag caused when the tongue weight of a trailer is applied to the rear of your vehicle, a weight distribution system is
view full answer...

Availability of Air Lift Ride Control Springs For 1999 Chevrolet Astro Van AWD
The Air Lift Ride Control Springs, part # AL59521, are designed for the rear axle of the 1999 Chevrolet Astro Van 2 Wheel Drive and 4 Wheel Drive Models. They will also fit the Cargo Van model of the Astro Van. I do not have any install videos of the Air Lift springs being installed on a Chevrolet Astro Van. I am including a link to the installation instructions on the springs. I am including a link to the Air Lift Springs being installed on a Ford F-150 truck. The vehicle is different bu
view full answer...

Can AirLift 1000 Helper Springs be Used with Weight Distribution on a 2003 Jeep Grand Cherokee
You can use air helper springs like the Air Lift AirLift 1000 Air Helper Springs # AL60754 on your 2003 Jeep Grand Cherokee as well as use a weight distribution system. The key is to setup the air pressure in the air springs before you setup the weight distribution system. The purpose of your air bag suspension is to help reduce sag at the rear of your vehicle when hauling a heavy load. The purpose of a weight distribution system is to distribute the load of your trailer among all axles which
view full answer...

Air Lift Compressor Installation on 2012 GMC Sierra
We have not yet had the opportunity to install the Air Lift Load Controller II Compressor System on a vehicle, so we do not have a video yet. As far as the fuse box connection goes, you can tap any circuit at the fuse box that is powered up only when the ignition is on. Using the fuse tap at the radio fuse works well. The lighting circuit for the dash-mounted gauge assembly can be connected to the orange wire in the tow package wiring. The tow package wiring is located above the area betwe
view full answer...

Will Air Lift LoadLifter 5000 Air Helper Springs Fit a 2012 Ford F-250 4x4 with 5th Wheel Hitch
The Air Lift LoadLifter 5000 Air Helper Springs, # AL57396, install on the insides of the frame rails on the truck. I looked up the instructions for the SuperRail kit 4426 and it looks like the brackets install on the outside of the frame rail so it is possible that these 2 system will work together. You will need to compare the instructions for the Air Lift kit which I have linked for you with the current situation on your truck to determine fit. With the air bags inflated properly it will l
view full answer...

Will the Air Lift Compressor Kit # AL25592 Work with the Firestone Ride-Rite Air Springs # F2245
You can certainly use the Air Lift Compressor Kit, # AL25592, with the Firestone Ride-Rite Air Springs, # F2245. I spoke with my contacts at Air Lift and Firestone to confirm that it would work. The Air Lift compressor kit and the Ride-Rite both use 1/4 inch air lines and fittings so they are compatible with each other. I have attached the installation instructions for the Air Lift compressor kit for you to check out. I would also recommend picking up the Air Lift Air Hose Cutter, # AL10530.
view full answer...

Where do the Upper Brackets of the Air Lift Load Lifter 5000 on 2001 Ford F-53 Chassis
I spoke with my contact at Air Lift and verified that they Air Lift Load Lifter 5000 Air Springs, # AL57410, will use the same mounting holes as your Firestone air bags. The air bag will mount forward of the rear axle like your Firestone air bags and uses a similar lower bracket that sits on the leaf spring forward of the axle. Based on the installation instructions, the upper mounting holes for the upper bracket must be drilled using the bracket as a template. Since you already have the upp
view full answer...

Custom Gauge Pillar for the Gauge for Air Lift Suspension on a 2006 Ford F-350 King Ranch
The gauge size in Air Lift kits like # AL25856 is designed to fit most custom pillar pods or dash mounts but they do not offer custom pillars or pods. The kits do come with a small pad the gauge fits in that can be mounted on the dash. For a 2006 Ford F-350 you can use Air Lift system # AL57212. A company called AutoMeter makes some custom gauge pillars that might work for you.
view full answer...

Does the Snubber Need to be Removed to Install AirLift 1000 Springs on a 2008 Jeep Liberty
You will need to remove the snubber on the suspension of your 2008 Jeep Liberty to install the Air Lift AirLift 1000 Air Helper Springs # AL60820 that you referenced. I attached a picture of the page of the installation instructions for this product that explains this.
view full answer...

High Capacity Suspension Enhancement for a 2012 Dodge Ram 1500
The frame and suspension is different between the 1500 and 2500 series 2012 Dodge Ram so the parts are not interchangeable. But if you want the most capacity for a 1500, take a look at the Timbren springs # TDRTT1500. These guys are rated for 7,000 pounds and would be ideal for beefing up your suspension. The Timbren springs will provide leveling support independently of each other, increase stability and ride quality, and reduce side to side body roll. I have included a link to an FAQ artic
view full answer...

What is the Maximum Air Pressure for Air Lift 1,000 Pound Capacity Air Helper Springs
According to the instructions which I have linked for you for Air Lift suspension enhancement # AL60769, the maximum air pressure is 35 psi and the minimum is 5 psi. Over-inflation and under-inflation can damage the air bags so you will always want to stay within the 5 to 35 psi range.
view full answer...

Are Inflation Valves Included with the AirLift 1000 Air Helper Springs for a 1995 Crown Victoria
Yes, the AirLift 1000 Air Helper Springs, # AL60798, do come with inflation valves so you can fill the air bags at the location of your choosing. The recommended method for installing these air bags is using the tee. You will route an air line from each air bag to the tee and then one line to the inflation valve. This will ensure that your air bags are filled evenly. If you think that the load in the rear of your vehicle will be uneven from one side to the other, then you can also install tw
view full answer...

Compatibility of Air Lift LoadLifter 5000 with Fifth Wheel Hitch on 2008 Ford F150
The answer to your question will depend on which installation kit you used to attach the hitch to the truck frame. Although the Air Lift # AL57398 installs on the inboard side of the frame member, the mounting bracket is installed using an existing hole in the truck frame. If this hole is blocked by your fifth wheel install bracket, you will not be able to install the air spring kit. I checked out the Pullrite Website, and was unable to access the instructions for their install brackets.
view full answer...

Order Tracking
Shipping Information
Contact Us
About Us

Help Videos and Articles
Search
Privacy Policy
Your Account Login