Accessories and Parts  x  >   Trailer Jack  x  >   Bulldog  x  >  

Detachable footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.

Black, teardrop-style knob is designed for use with Bulldog sidewind jack cranks.

Plunger pin has a 3/8" diameter and works with Bulldog jacks. Includes spring and cotter pin.

Caster has fitting for 2" jack tube and is rated at 1,500 lbs.

Crank assembly fits Bulldog round, sidewind jacks with capacities not exceeding 5,000 lbs.

Replacement gears work for Bulldog sidewind jacks with 5,000-lb capacity.

Detachable base plate is 6-1/5" tall and fits 2,000-lb to 5,000-lb jacks with 2" diameter tubing.

Crank assembly is designed for Bulldog square, sidewind jacks with 8,000-lb capacity.

Crank assembly works with Bulldog round, topwind jacks with capacities not exceeding 5,000 lbs.

This crank assembly for Bulldog round, sidewind jacks with a 2,000-lb capacity includes handle, gear kit and black, teardrop-style knob.

Make sure your jack doesn't lean under those heavy loads by providing it with a little extra support. Plate can be either welded or bolted onto application.

3" Diameter, female pipe mount measures 2-1/2" long and is designed to be welded onto your application. Pin hole diameter is 5/8".

2" Diameter, male pipe mount measures 1-7/8" long and is designed to be welded onto your application. Pin hole diameter is 9/16".

Designed for use with your heavy-duty Bulldog single-speed jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. Lifting has never been faster or easier.

2" Diameter, male pipe mount measures 2-1/4" long and is designed to be welded onto your application. Pin hole diameter is 5/8".

Designed for use with Bulldog round, topwind swivel jacks with 5,000-lb capacity, this assembly includes the pull pin, chain and drive screw.

Replacement bearing is designed for Bulldog round jacks with 2,000-lb capacity.

Red, eagle-claw knob is designed for use with Bulldog topwind jack cranks.

All mounting hardware is included with this crank assembly. When installed, black-primed handle will extend 17-1/2" from your heavy-duty Bulldog jack.

All mounting hardware is included with this crank assembly. When installed, black-primed handle will extend 17-1/2" from your heavy-duty Bulldog jack.