Accessories and Parts  x  >   Hitch Cargo Carrier  x  >  

Perhaps the easiest light kit to install, the sealed light units simply snap into the built-in mounting brackets on Draw-Tite, Rola and Tow Ready cargo carriers and then plug into the existing 4-pole trailer connector on the vehicle. Not only provides a great finished look on the carrier, but also the important lighting features when your gear blocks the vehicle taillights.

etrailer.com's LED light kit for Tow Ready, Rola and Draw-Tite cargo carriers with integrated light brackets. This cargo carrier light kit features super bright 12 powerful LED's per light with the faceted mirror gleam reflector for a superior look.

This part replaces (1) M6 x 50 mm carriage bolt for your Thule Goalpost hitch-mounted load bar, Wheel-On roof-mounted bike wheel carrier, Hang Two roof-mounted surfboard carrier and most Thule rooftop kayak carriers.

Add versatility to your cargo carrier by using the folding adapter. This allows your cargo carrier to fold up and out of the way. With the adapter you will also increase the ground clearance between the carrier's platform and the ground to eliminate bottoming out.

This pin-and-clip set secures the upper assembly of your Goalpost load bar in place in the lower assembly. The pin slides through holes in both bars, and the clip secures the pin in place so that the upper assembly rides at the correct height.

Turn loading and unloading of heavy equipment onto your Pro Series Solo hitch-mounted cargo carrier into a hassle-free endeavor with this steel ramp. The 2-piece ramp bolts to your carrier and folds up for storage when it's not in use.

This bolt on cargo carrier light kit is designed specifically for an easy installation on the carrier models 52018 and 52017. The simple bolt on design installs quickly and will get you on the road quickly.

This LED light kit lets you add stop, turn and tail light functions to your hitch cargo carrier. Kit includes a pair of 10-diode, red LED lights and 2 mounting grommets. The wiring harness has a standard 4-way flat, trailer-end connector for easy setup.

Get complete access to the rear of your vehicle without having to remove your hitch-mounted wheelchair-and-scooter carrier. Included adapter provides up to a 7" rise for carrier.

Convert your hitch-mounted cargo carrier (CC-100 - sold separately) to a platform-style, 2-bike rack with this adapter. Front and rear bike wheels slip into the included wheel hoops, and 2 tie-down straps help to keep bikes in place during transit.

Keep all your gear locked away by adding this lid to your Carpod hitch-mounted cargo carrier. The galvanized steel lid minimizes the need for tie-downs or a cargo net and has a 3/8" diameter hole for a padlock (sold separately).

This license plate bracket mounts directly to the front of your Thule Terrapin hitch-mounted cargo carrier with existing plated screws. Bracket includes a built-in light to illuminate your license plate for nighttime driving.

For use when your gear on your hitch mounted cargo carrier blocks the vehicle taillights. This kit easily attaches to the side lip on several Draw-Tite cargo carriers and simply plugs into the vehicle's wiring harness. This is a simple and safe solution to get you where you are going.

This flathead screw is used with a large washer (sold separately) to install the box assembly of your Thule Terrapin hitch-mounted cargo carrier to the frame assembly. Screw requires Allen wrench (sold separately) for installation.

This hex key - or Allen wrench - is specifically designed to tighten bolts that are required for assembly of your Thule Terrapin hitch-mounted cargo carrier or Thule Tracker and Tracker II roof-rack towers.

This handy adapter lets you transport 1 bike on your hitch-mounted cargo carrier. The versatile fork block with 5-mm stainless steel skewer simply clamps to your carrier's side rails. Bolt-on rear wheel strap included.