Accessories and Parts  x  >   Bulldog  x  >  

Plunger pin has a 3/8" diameter and works with Bulldog jacks. Includes spring and cotter pin.

Designed for use with Bulldog round, topwind swivel jacks with 5,000-lb capacity, this assembly includes the pull pin, chain and drive screw.

Detachable footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.

Red, eagle-claw knob is designed for use with Bulldog topwind jack cranks.

Caster has fitting for 2" jack tube and is rated at 1,200 lbs.

Detachable base plate is 2-1/10" tall and fits 2,000-lb to 5,000-lb jacks with 2" diameter tubing.

Repair kit is for Bulldog high-profile latch featured on Collar-Lok coupler series.

2" Diameter, male pipe mount measures 2-1/4" long and is designed to be welded onto your application. Pin hole diameter is 5/8".

Steel-wheeled assembly fits jacks with a 2" diameter tube and is rated at 1,000 lbs.

Make sure your jack doesn't lean under those heavy loads by providing it with a little extra support. Plate can be either welded or bolted onto application.

All mounting hardware is included with this crank assembly. When installed, black-primed handle will extend 17-1/2" from your heavy-duty Bulldog jack.

Detachable base plate is 6-1/5" tall and fits 2,000-lb to 5,000-lb jacks with 2" diameter tubing.

Crank assembly works with Bulldog round, topwind jacks with capacities not exceeding 5,000 lbs.

Caster has fitting for 2" jack tube and is rated at 1,500 lbs.

Removable poly wheel fits 2,000-lb to 5,000-lb jacks with 2" diameter tubing. Caster reduces your jack's overall capacity to 800 lbs.

Replacement gears work for Bulldog sidewind jacks with 5,000-lb capacity.

All mounting hardware is included with this crank assembly. When installed, black-primed handle will extend 17-1/2" from your heavy-duty Bulldog jack.

Repair kit works with round Bulldog gooseneck couplers that have a capacity of 20,000 lbs. Contains coupler assembly, locking pin assembly, locking pin cover, Bulldog label and warning label.

Replacement wheel is made of durable polyolefin and is rated up to 1,200 lbs.

Designed for use with Bulldog heavy-duty, rack-and-gear jacks, this assembly includes a zinc-plated rack post with steel caster base.

Designed for use with your heavy-duty Bulldog single-speed jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. Lifting has never been faster or easier.

Caster assembly with durable poly wheel fits Bulldog round, A-frame jacks with 2" tube.

Repair kit includes torsion spring, coupler locking shaft, shaft retaining ring, center lock nut and a curved handle assembly - all you need to take care of your gooseneck coupler head.

2" Diameter, male pipe mount measures 1-7/8" long and is designed to be welded onto your application. Pin hole diameter is 9/16".