Accessories and Parts  x  >   Crossbars  x  >  

Keep your Thule AeroBlade load bar quiet and fully functional by replacing a lost or damaged channel cover on top of the bar. This rubber strip has a textured WindDiffuser surface that helps to reduce wind noise.

Replace a lost or damaged lower cover strip on your Thule AeroBlade load bar to ensure it remains ultra quiet on your roof. This rubber strip seals the bottom of the bar to eliminate noise caused by an open channel.

These channel-mount eyebolts provide the perfect anchor point for a ratcheting strap or other tie-down accessory on your Rhino-Rack Aero/Sportz roof-rack crossbars. The eyebolts mount into the built-in C-channels of your crossbars.

These channel-mount eyebolts provide the perfect anchor point for a ratcheting strap or other tie-down accessory on your Rhino-Rack Heavy-Duty roof-rack crossbars. The eyebolts mount into the built-in C-channels of your crossbars.

These 5" tall load stops can be used as ladder pegs or load holders to keep your gear from shifting on your Rhino-Rack Aero/Sportz crossbars. The load stops mount into the C-channels of your crossbars and include tie-down points.

These 5" tall load stops can be used as ladder pegs or load holders to keep your gear from shifting on your Rhino-Rack Heavy-Duty crossbars. The load stops mount into the C-channels of your crossbars and include tie-down points.

This adapter kit includes U-bolts and brackets that adapt your Rhino-Rack Foxwing or Sunseeker awning for use with Thule square, Yakima round or Inno roof-rack crossbars.

Add a work light to your roof-rack crossbars with this sturdy steel mounting bracket. The bracket mounts in the C-channel of your Rhino-Rack Aero/Sportz crossbars and provides a 3/8" diameter hole for mounting most standard work lights.

Get more out of your Rhino-Rack Foxwing awning with this extension piece. The canvas extension simply zips into place on your existing awning and can be used for additional overhead cover, as a sidewall for privacy while camping, or as a windbreak.

Mount a crossbar on a camper shell, hard tonneau or hard resin roof with these fixed-mount roof-rack legs. Legs install with bolts and provide a mounting point for a Rhino-Rack Heavy-Duty or Aero crossbar. Security bolts included. Drilling required.

This J-bolt is an affordable option for carrying a spare tire on your Rhino-Rack Heavy-Duty crossbars. It hooks to the underside of one crossbar and goes through a wheel stud hole of the tire. A nut is threaded over the bolt to secure the tire.

These custom-fit clamps and pads let you mount Rhino-Rack 2500 legs to your vehicle to create an aftermarket roof-rack system. Clamps mount to legs with bolts. Kit includes 4 clamps and 4 pads.

These custom-fit clamps and pads let you mount Rhino-Rack 2500 legs to your vehicle to create an aftermarket roof-rack system. Clamps mount to legs with bolts. Kit includes 4 clamps and 4 pads.

Suitable for use with Rhino-Rack RL, RLCP, RLTP and RLTF roof-rack leg styles, these spacers bolt to the tops of 2 legs to level a crossbar on your vehicle's roof. The 3/4" thick spacers are contoured to accept Aero crossbars.

Add a work light to your roof-rack crossbars with this sturdy steel mounting bracket. The bracket mounts in the C-channel of your Rhino-Rack Heavy Duty crossbars and provides a 3/8" diameter hole for mounting most standard work lights.

Adapt your Rhino-Rack Sunseeker roll-out awning for use on any flat surface with this wall-mount fit kit. Includes 2 brackets that fit into the rear C-channel of the awning and provide a mounting flange for attaching Sunseeker to a flat surface.

This awning mounts to most roof racks and rolls out from the side of your vehicle to provide protection from the elements. Perfect for campers, tailgaters or food truck operators, the fabric awning packs away in seconds and includes a storage bag.

This small plate provides a simple solution for mounting a strobe, emergency or rotary-style light to your Rhino-Rack Heavy-Duty roof-rack crossbars. Sturdy steel plate includes pre-drilled holes to accommodate your light's existing hardware.

Perfect for tailgaters, campers or tradesmen, this high-quality canvas awning attaches to your Rhino-Rack, Thule square, Yakima round or Inno crossbars. Easy-to-use cover protects the passenger's side and rear of your vehicle from the elements.

This awning rolls out from the side of your vehicle to provide protection from the elements. Mount it to any flat, vertical surface using the included wall-mount kit. The awning packs away in seconds and includes a storage bag. Great for RVs.

This adapter lets you install a Foxwing/Sunseeker extension piece (RR31101; sold separately) on your Rhino-Rack Sunseeker II awning (RR32105).

Suitable for use with Rhino-Rack RL, RLCP, RLTP and RLTF roof-rack leg styles, these spacers bolt to the tops of 2 legs to level a crossbar on your vehicle's roof. The 3/4" thick spacers are contoured to accept Heavy-Duty crossbars.

Don't break your back - or the bank - loading heavy objects onto your Rhino-Rack Heavy-Duty crossbars. This roller offers a simple and affordable solution for loading ladders and other equipment onto your roof rack from the rear of your vehicle.