Select Your Vehicle

View Cart




Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design




Code: HM48470


90 reviews

Price:$20.95


Quantity: 


Product Specs:

Wiring

Trailer Connectors

Vehicle End Connector


Plug Only

4 Flat
5 Flat
7 Blade

Hopkins


This heavy-duty trailer connector socket has an outlet for 7-way, 5-way and 4-way flat plugs. A weatherproof, insulated lid covers the terminals. The cover is also easy to open and extra-durable.

Video of Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design


Customer Reviews

Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design - HM48470

Average Customer Rating:  4.8 out of 5 stars   (90 Customer Reviews)


This heavy-duty trailer connector socket has an outlet for 7-way, 5-way and 4-way flat plugs. A weatherproof, insulated lid covers the terminals. The cover is also easy to open and extra-durable.


- HM48470

by: Darryl F02/11/2014

2006 Toyota Tacoma


I had broken my factor connector on my 06 Tacoma, frankly due to a poor design placement by Toyota in my opinion, however I was not going to pay a premium $200+ price for a new OEM part and I wasn't planning to place it back in the original spot to only get broken again. This is a great replacement plus I no longer need a wire adapter. The unit fit perfectly in pre-cut hole that held my left tag light. Only had to drill 4 small holes for the bolts to secure to the bumper. Only pain was cutting the old wire and attaching it to the new connector, but that only took 10 minutes top. 116271



- HM48470

by: Gerald09/13/2013

2013 Jeep Wrangler


Installed: 9/12/2013 Jeep Wrangler Unlimited Installation of the plug was a quick and easy. The existing Warrior hitch has a tab on the side for a trailer wiring socket. Drill a new hole on the installation bracket (comes with the trailer connector) so the bracket on the hitch matches bracket on the trailer connector. Done deal. This is the only trailer connector I found which has the 7, 5 and 4 connector options. Flexibility is always a good idea when you are borrowing someone else trailer or renting. 99853



- HM48470

by: Bryan12/28/2010

Jeep


Plug installed on my Jeep Turned out pretty cool, if I say so myself. 4716



- HM48470

by: Rik09/15/2014

Jeep Wrangler TJ


the perfect plug for mt Wrangler tj 151123


Comments

Its tough.

Rik - 09/15/2015

14995



- HM48470

by: Brian N.09/06/2014

2008 Dodge Durango


Part arrived quickly and was exactly as pictured. Installation on my 2008 Dodge Durango was a little tricky, as there is no easy place to install it. Luckily my buddy was able to drill holes in bumper next to the hitch and then tap them so we could attach the connector with screws. There is not much room for the connector to fit, but by bending the metal mounting plate slightly it worked perfectly. The chart included with the product made it easy to wire correctly. 150280



- HM48470

by: Todd R11/05/2013

Jeep


I bought this to replace a factory Jeep 7 point connector. I didn't figure out till I was done that the brackets were the same shape and I could have left the original on. It was very easy to install, even for someone as mechanically challenged as I am. The bracket that was included is a bit flimsy and there were no self tapping screws with it. Otherwise it was exactly what I needed. Less than 30 minutes to install 106389



- HM48470

by: Greg C03/12/2014

2013 Ford F-150


This is a nicely built durable connector , the install was easy but took some time ...I pre wired it with a four blade male which plugged into the factory four blade female on my 2013 f150 ... just make sure your connection screws are tight , I added silicone to them so they dont back out ... Looks great and it is defiantly a nice piece of hardware , spring shuts tight and seals nice ... 120457



- HM48470

by: Calvin P.01/02/2015

2015 Chevy Silverado 3500HD


I used this to complete the factory 5th wheel wiring in my 2015 Silverado 3500HD. Gives me a professional installation for my 5th wheel RV. 167564



- HM48470

by: Greg09/03/2013

Volvo XC90


The connector interfaces very well with my XC90 and there is no drilling or advanced skills needed. Everything went together very well. 98025



- HM48470

by: Chris01/21/2012

2002 Ford F-150


Its exactly what I needed to rewire my truck (2002 F150). My only complaint is that once you snap all the parts together in the rear, its very difficult to take apart. I ended up breaking off one of the clasps while trying to adjust the wiring. It still seals in the wires and has a tight fit. I really like my setup now!!! 30096



- HM48470

by: Victor Lagomasino01/24/2014

Ford F-250


This website has a huge selection of products. Shipping was very fast and the regular updates were appreciated. The item is very robust and appears to be well built. Installation was straight forward. Was a great replacement for the stock F-250 connector. 114683



- HM48470

by: Bruce01/29/2013

Volkswagen


The product is well constructed. I did not realize until after starting the project that my car (volkswagon) had a the type of electrical system thtat required an electrical converter. I look forward to many years of use once I get the system hooked up. 64436



- HM48470

by: Jim S08/06/2012

Ford F-150


This item is very nice. I was replacing the Ford original on my F150 pickup and the existing wires fit without any modification. I like the dual connectors. Now I can use either the 7 way or 4 way without any additional adapters. 50742



- HM48470

by: Deon D03/06/2013

2004 Chevy 1500 Silverado


Great product. After losing two 4-pin adaptors I decided to purchase this product. 15 minute installation. Mounted in factory location on 2004 Chevy 1500, just had to drill four holes in OEM bracket. Too easy. 69295



- HM48470

by: Vito Lotta - San Diego08/02/2014


I could not find a 7 round with a 5 flat connector anywhere in San Diego. Most of the people I spoke with at trailer shops or RV stores said no one makes it only with a 4 flat connector. I just kept looking because I needed one with a 5 flat for my boat and didn't want to keep using my adaptor. I found etrailer and the rep I spoke with was very knowledgeable and said he had exactly what I was looking for and it was a great price. I will be always using etrailer for my trailer parts for now on. Thank you, Vito Lotta - San Diego 144089


Comments

Still working Great

Vito L - 08/02/2015

13816



- HM48470

by: John L05/19/2011


I received the product quickly and in perfect condition the packing was excellant. I installed the connector easily and quickly. I consulted the Gm wiring diagram and als found the wires for all the 7 connections. I had a tight spot within the bumper edge, but managed to find short bolts to attach the bracket in old exsisting holes. The rest was easy attaching the connectors and making sure all wires were through the rear enclosure and tightening them down. I tested the 4 wire connector with my boat trailer lights and it worked like it was designed to do. I LOVE the versatility of this connector. Thanks etrailer.com!! Great product at a great price. 14869



- HM48470

by: Bill D06/03/2014


Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo. 133981



- HM48470

by: Marc Allyn02/13/2014


Had everything you need. Be careful tightening the terminals, they bend easily so you may short one to another. Otherwise good bang for the buck. I would buy again. 116423


Comments

After a year the connector is still working great. Just remember to close the cover for the 5 pin flat connector. Still feel good about it.

Marc A - 02/15/2015

9528



- HM48470

by: Nathan03/20/2015


I am the purchasing manager for a company that fabricates and installs custom truck equipment. Usually our customers don't want the 7 way RV style plug. When they do want this plug, we always install the Hopkins model. It is a great unit, and also gives the customer 4 way and 5 way flat options as well. This is the one I use on my personal truck. Great product, and E trailer always ships fast and has everything in stock. Much better than our local trailer supply company. 179954



- HM48470

by: Smiley01/31/2012


Great product - the overall depth is a bit deep and for my specific application I had some challenges finding a good mounting point (partially due to the depth of the adapter and partly due to the lack of solid mounting surface. The product itself is sold with a flexible five/four way plug (single plug accommodates both the four and five pin) that will not easily break. The seven pin plug has a fairly stiff cover that is spring loaded. Wiring was simple too! 30756



- HM48470

by: PF06/02/2016


This Hopkins 7,5, and 4-way trailer cord socket was delivered quickly and fits my needs for all my trailers. It came with all fasteners and complete instructions in the package and etrailer videos. I recommend this product and etrailer.com as a vendor. 255835



- HM48470

by: RCC09/11/2012


Very well made, nicely designed. Note, if you mount this vertically, as suggested, a plastic cover is provided for the rear, and the unit may extend beyond your old bracket. My old bracket was a part of the original Hidden Hitch, and this extended beyond the old bracket. Because the rear plastic cover is NOT waterproof, it can be sealed with a small bead of RTV or similar sealant under the edge of the cover. 54217



- HM48470

by: Norm B04/06/2012


Actually I had two (2) seperate order because i could not make up my mind as to how i wanted to wire the trailer and other accessories that I have. Anyway, both orders were packaged extremely well. Shipment/receipt was great; took a short timeframe from the time items were ordered. Only one problem. No one showed up to help install all the parts I ordered. Thanks for the products and the support! 36330



- HM48470

by: RMC07/10/2013


Looks good, seems sturdy enough. I had a little trouble getting the back cover on after squeezing all my wires through. The rubber seal for the wires kept getting stuck on my wires when I tried to slide it down, probably be a good idea to make sure they're all in a nice and tight bundle to make it easier. Haven't been able to try it yet, though everything seemed to work when I used a test light. 88699



- HM48470

by: John S01/12/2014


This seems to be a pretty nice plug. Makes it nice with the 4 way and 7 all in one. The lid has a pretty stout spring on it so it should keep the weather out. Fast shipping excellent service. 112601



- HM48470

by: Patrick W.09/15/2015


Build quality seems better than the base Hopkins product I had used before. Installed it in a mounting box (18159) on my Curt round tube hitch. 225635



- HM48470

by: David Messenger05/14/2011


I like this trailer connection. It seems to be well made and it is reasonably priced. I received my order in a reasonable time as well. The installation was not difficult and the wiring diagram was clear and understandable. I really like the idea that I can now tow a trailer with just about any type of connection and it will work. 14028



- HM48470

by: James04/07/2013


A quality product from a quality supplier. This was a simple task to purchase and delivery was prompt. Information supplied by vendor was EXEMPLARY ! Without prompting I was informed of each step in the purchase, shipping, delivery process. I would recommend this company and will gladly purchase from them again. 74629



- HM48470

by: Leonard Moore04/05/2011


Great plug. The rear cover has two clips to hold the wire cover on the back. If you attach the wire cover, don't try to remove it, brand new the clips break off. Very fragile. Other than that the plug is easy to install and wire and hold the trailer plug firmly. 11114



- HM48470

by: Mike A.12/27/2013


wow!!! what a surprise, we expected to receive our order after Christmas but got it on Christmas eve. Merry Christmas to me woohoo!!! looks sturdy and ready to install as soon as the new year comes i will have my trailer back on the road. Thanks etrailer Mike 111319



- HM48470

by: fw05/17/2014


I occasionally need to tow trailers with both the seven and 4 way flat connection. This connector gives all connections in one unit which was easy to install and cosmetically appealing. A solid unit that works as advertised. I strongly recommend this product. 131104



- HM48470

by: Frank Folkmann09/11/2012


Great Product. I can not give enough praise to etrailer for the ease of ordering and promt shipping also the followup of my order. There should be more companies like etrailer. The Multi-Tow Connector will enable me to use trailers with different wiring 54242



- HM48470

by: Lynn E07/10/2015


I needed to replace my previous plug because the hinge had broken, allowing the now unsecured plug to fall out. I hoped to find a metal replacement but this much improved plastic design should be just fine. Price was good and delivery was fast. 210754



- HM48470

by: Steve A.02/28/2013


Wanted a socket that I could plug "all" my toys into without separate adapters for each trailer. This looked like it would fit the bill, and it did. Installation was very straightforward following the trailer diagram offered on the website. 67954



- HM48470

by: Kevin L09/12/2013


Overall , great plug and decent design . The rear cable entry could be a bit better to make it more weatherproof but works ok as is . I would highly suggest using a dielectric grease and tinning the wires to prevent corrosion . 99570



- HM48470

by: Bob K08/13/2015


I wish they'd spend a few extra cents and include stainless bolts with this. I've installed several and the bolts always rust badly. I now always have to make a separate trip to obtain stainless bolts. Otherwise works great. 218899



- HM48470

by: Art K09/12/2014


The product installed very easy and works great I,m good with electric connections but I had to look up the wiring schematic to find what wires went where other then that no problems. Great service as well 150871



- HM48470

by: Tow Man06/18/2013


Order was delivered fast and correct. Pretty easy to install. After installation, it worked as intended. Looks like this cover and hinge is a lot more substantial than the one it replaced. 85130



- HM48470

by: Eric05/07/2014


Great product. Used it many times in the short time i've had it and love it so far. Very heavy duty, even I can't break it. Not too bad to install either if you use hand tools occasionally. 129515



- HM48470

by: Paul06/29/2012


Good quality, easy to install. Would be top marks if it wasn't made of such light plastic; Everytime I use it I think I might break it. So far so good, will see how it holds up in the snow. 46179



- HM48470

by: Topkat04/15/2014


Easy install. Excellent product! Would have been nice to come with a couple bumper mounting screws and nuts. I did break one of the tabs on the backshell but that was my fault. 125157



- HM48470

by: dean h05/30/2012


great product will make it easy to hook up camper, boat. and cattle trailer, all three with different connectors and also trailer brakes. being very sturdy and water tight helps also 42074



- HM48470

by: David S.10/01/2015


Good solid product. I would definitely order from eTrailer again if I ever need any more trailer parts that they handle. Parts arrived sooner than expected an in solid condition. 228768



- HM48470

by: Don F04/24/2014


This connector is really solid, the hinge for the top connector looks almost indestructable and I no longer have to look for my flat adapter having both in one connector 127061



- HM48470

by: John05/12/2014


I like having the 2 most common connectors on my truck. The great thing about this is the 5 way flat works with 4 ways and the cover for it is hinged like the 7 blade. 130033



- HM48470

by: G.01/04/2015


HARDWARE IS NOT STAINLESS OR GALVANIZED! Within a few days the painted hardware started rusting pretty bad. Swapped it out for galvanized hardware to salve this. 167652



- HM48470

by: JR07/17/2015


Very rugged device, good design. This alleviates having a 4 or 5 wire connection hanging from your vehicle. Great for replacement of old connector. Great for DIY 212372



- HM48470

by: B Adamache01/04/2014


This is my second unit. Its the best plug I've found for allowing both a 7 pin and a 4 pin trailer plug with both having good covers to keep things clean. 111907



- HM48470

by: Ray M.12/13/2013


The part was shipped fast. The directions were easy to follow and the quality of the material is excellent. I'll be doing business with them again. 110075



- HM48470

by: Troy C04/25/2013


I am very pleased with product and will come back for my next purchase. Also very friendly people to work with. I could not ask for better service. 77770

Show More Reviews
92
92



Do you have a question about this Wiring?

VS

Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End




Code: HM40975


506 reviews

Price:$29.95


Quantity: 


Product Specs:

Custom Fit Vehicle Wiring

Trailer Hitch Wiring

No Converter


Custom Fit

7 Blade
4 Flat

Hopkins


This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.

Video of Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End


Customer Reviews

Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975

Average Customer Rating:  4.9 out of 5 stars   (506 Customer Reviews)


This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.


- HM40975

by: Chas07/03/2013

2013 Chevy Traverse


very easy to install. it is a rather tight fit on a Chevy traverse. Allows a factory install of aftermarket hitch by using GM harness # 25910884 ($68.00) . Harness comes with snap in wire ties that go in holes on cross frame of rear bumper. Vehicle to connector harness is located to the rear of right rear tire between outer body panel and tail light . Use flash light and look up. Cord fits E trailer Vehicle end plug 40975. Need to drill two holes in cross frame for bracket. It all snaps together very well. Also need to add 3 relays in engine fuse box. GM13502753. This is gray relay 1/2 in square and has 2750 market on top. this eliminates splicing delicate factory wiried and hassel of hot wire from battery. Bumper skirt snaps back into place and hides hitch totally on 2013 Chevy Traverse. 87284


Comments

Has worked like OEM installed product only about $400 cheaper.EXCELLENT I will do it again on my next vehicle,

Chas - 07/03/2014

5294
Comments

Chas,Where did you mount this part on your Traverse? I want to mount it to my 2010 Acadia but I cant find a good place to mount it? Can you send me a picture?I already bought the gm factory harness to install along the cross frame.

comment by: Rod b - 05/10/2015


11570
Comments

I installed it to the left of the receiver. trimmed some of the plastic on bumper trim that holds the removable access cover for the hitch. Y ou need to be careful not to cut away the slots that hold cover in place. The installed hitch and electrical are completely concealed.. Note there are several blogs on the Traverse owners forum. I also bought the correct tow switch,and relays that fit in the engine compartment fuse box. The ranny is already programmed at factory for tow mode. One fellow posted photos of the whole prcedure and listed all part numbers. I also ordered the tranny cooler from E-Trailer. Be sure to use a digital thermometer to be sure you hook up to correct lines. You will need to find correct fitting on internet. It will take some time to remove most of the front clip to have room to work.Incidentally I drove Traverse up on a coulpe fo 4X4 to be able to work under it., I used a floor jack to raise up hitch to align it.chas

comment by: Chas - 05/19/2015


11875



- HM40975

by: Ron P03/17/2014

2014 Chevy Silverado 1500


Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team! 120915


Comments

Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.

Ron P - 03/19/2015

10141



- HM40975

by: tom g.10/07/2012

Dodge 2500HD


Because of my particular placement of the plug mounting bracket, I had to spot weld the bracket to my hitch. Once I did that, I let it cool a bit, that simply snapped my connector in, plugged my chevy 2500 hd wiring harness in the back and now I do not have to mess with plug adapters for my flat wired trailers. Very, very, easy installation. Additionally, this new plug solved a bunch of issures with blinking trailer lights or lights that were not working at all. Thanks for your courteous service, great price, and fast shipping. Forever a customer, tom 56598


Comments

All my comments in my review almost a year ago are still applicable today. Our winter here was terrible with all the rain, snow, and ice. My lighting circuits on my trailers and boat worked great...whereas in the past, they performed poorly in any kind of wet conditions.I always recommend to my friends who have had wiring problems with their trailers to start at the truck with a solid performing plug with appropriate adapters for the type of trailers you will be using. It will eliminate a host of problems with lights not working properly.Thanks once again for your courteous service.

tom g - 04/09/2014

3488

- HM40975

by: Curt06/06/2012

Ford F-250


Trailer plug unit (Pollack 7 & 4 pole for my F-250 was broken by the car wash. Called the dealer and they wanted double what e-trailer sales it for plus I had to special order and that took too long to ship as I needed it immediately. I went online and found ETrailer.com and they had the exact replacement device that was identical to what the manufacturer had installed. I ordered it and asked to have it within a set timeframe and e-trailer did exactly what they said they would do! The lady I spoke with Cathy was on the stick with the entire order and follow-up. The Etrailer staff then followed up the very next day of delivery. I have just installed the plug this morning so it has to be tested but do not forsee any issues as it is the exact replacement which worked great before. I am very impressed with the service here and will most definitely buy from them again as well as refer my freinds and business associates. I manage a commercial fleet as well as work with many other contractors who have trucks and trailers and there is always the need for something in this category. Great job ETrailer, you have a new long term customer. 42962



- HM40975

by: bh08/05/2014

2014 Chevy Silverado


I searched for days for something like this to work on my 2014 Chevy Silverado that did not have the factory tow package. I couldn't find anything, until I read a previous review with photos from another reviewer. Dont be fooled by the "item photo" and the "sideways position in the photo" , the bracket shown is for mounting elsewhere if desired. This item was a simple unplug the fake factory blank plug and plug in this real one installation you can do at home. This item fits perfect. Take a look at the previous review photos etc. Regular shipping was very fast. 144612


Comments

Still works great

bh - 08/27/2015

14603



- HM40975

by: Bruce W09/21/2012

2010 Ford F-150


This is a plug-in replacement for my 2010 Ford F-150 with factory installed trailer package. I had this exact same connector but someone unclipped it and stole it. Ford Parts wanted over $100 for a replacemnt (they included the entire rear bumper harness that I did not need). I had the cutout on the hitch that exactly matched this bracket and the blue socket that you see in the optional pigtail available for this product (see attached photo). I snapped this dual connector into my existing cutout - fit perfectly. Did not need to use the included bracket. So if your factory connector is damaged or stolen, use this as a snap-in replacement. The only difference is it says "Pollack" instead of "Ford". I called Hopkins before I bought and they said they supplied a lot of the OE parts Ford uses. 55449



- HM40975

by: James S.10/24/2014

2006 Chevy Silverado


The trailer wiring connector and mounting bracket I purchased from etrailer fit my 2006 chevy silverado truck perfect. It was easy to install and of good quality. I would recommend them and there products to my friends 157842


Comments

great, easy to install very good quality,really like the the ligths hook up receptical,good quality as well

James S - 10/24/2015

15671



- HM40975

by: Gary S.10/16/2012

2004 Chevy Silverado


I noticed that you had a video on installing this product on a 2004 Silverado, and a 2006 Silverado. So I'm thinking that should be easy on my 2005. NOT SO! You have to install the bracket on the part of the bumper where there is space. But in doing so, the large piece of round channel causes a big problem. So, what you do is drill holes, then put plug into the connecting wiring harness. Then you have to run the self tapping screws into the bracket while holding the bracket in your hand with wiring attached. Once they are started into the bumper, you will need to use and 1/2 inch wrench because of the clearance issue to get them tight on the driver side of the bracket. Socket will work on the other side. And I thought it would be simple. But it did work 57400



- HM40975

by: Josh S.09/11/2012

2011 Jeep Grand Cherokee


This was a great addition to the hitch I bought for my 2011 Grand Cherokee. I was able to plug it right into the factory harness for a perfect fit. The only issue you may have is the trailer lights won't work until you get the computer flashed from the dealer to tell the Jeep it has a towing harness attached now. 54337


Comments

I have a 2012 Jeep Grand Cherokee that came without the tow package, but which still had the 7-way connector at the rear. This trailer connector socket attached easily to my hidden hitch, and connecting it to the Jeeps 7-way was a snap. If your trailer signals and brake lights do not work after installing this socket on the 2012 WK, youll probably have to take it to the dealer for a body control module re-flash, and itll cost you around $100.

comment by: Randy D - 02/19/2013


1065

Thanks for the info. We have seen some dealers so it for less even for no charge. Just depends on the dealer.

Patrick B - 3/21/2013




- HM40975

by: Emmanuel Vincent03/12/2014

2014 Ford F-250


Fitment was on a 2014 F250 Super Duty. I purchased a heavier hitch and needed the bracket for my existing multi tow wiring connection. Great quality and looks very clean! 120360


Comments

Product has held up great and still functions like it did the day I installed it.

Emmanuel V - 03/13/2015

10019



- HM40975

by: Tracy P.12/21/2013

2008 Ford F-350


I purchased this for my 2008 F-350. My factory one got broke and this was a perfect fit, a great O.E. replacement 110786


Comments

I have now used it several different occasions and works as good as original. Great Product.. Recommended

Tracy P - 12/21/2014

8125

- HM40975

by: Conrad06/30/2011

Volvo 240


This is a great idea. I want to be able to use either type of plug--this does that. But I'll have a big hassle mating up the other side. I'm looking for a connector or else I'll have to solder and carefully shrink wrap all the connectors. it would be great if a pig tail was provided. It is designed for OEM applications for Ford Dodge and GM. I am putting it on a Volvo 240 Wagon. Most of the time I pull very small boat trailers. I have one bigger trailer that is 1900 lbs and wired with a 7 prong connector so I can use utility lights and trailer backup lights. This is a very nice quality connector. I just think it is STUPID not to sell it with a wiring pigtail. 18334


Comments

A pigtail can be purchased for this connector. In fact, we do have it bundle with the pigtail.

Patrick B - 09/03/2013

2015

- HM40975

by: DaveR03/14/2014

2002 Chevy Silverado


Good quality and installation was easy enough. It would be nice if the clocking of the notch for the rear connector from the vehicle would line up with the notch for the trailer connector. This would make wire tracing a lot easier. The wiring color-to-color connections for a 2002 Sierra do not match the connections for the 2002 Silverado as shown in the video but a few minutes with a voltmeter and the wife flipping levers was all it took to find the right match-up. 120751



- HM40975

by: Mark D08/11/2014

2014 Chevy Silverado


Fast shipping, Installed into the existing blank plate and hooked up the wiring in 20 seconds. Did not use the metal plate, it fits into a 2014 Chevy Silverado WT. 145854


Comments

Great

Mark D - 08/11/2015

14120



- HM40975

by: David07/26/2014

2006 GMC Sierra


Nice and easy to do, plug and play. I tried to use the screws that came with the kit but they didn't work for me. I ended up using some bolts and nylock nuts to put it on. Yes you can fit a wrench up in that slot in the bumper('06 Sierra.) 143081



- HM40975

by: Old Dave06/20/2015

2015 Chevy Silverado 1500


Bought this to replace the stock blank on my 2015 Silverado 1500 WT. Super simple to install made even easier after I removed the rear license plate and reached through to unclip the blank (Better than trying to reach up from under the bumper). The wire harness unclips, after removing the white locking tab, and snaps right in to this new socket. It can only plug in one way. Replace the white locking tab and the new Pollak connector socket snaps right into the cut out from the blank. No use for the supplied mounting bracket. That's it. Oh, you might want to replace your license plate and you are done! 205775



- HM40975

by: Ryan05/20/2015

2013 Toyota Tundra


I bought this as a replacement for the existing trailer connector on my 2013 Tundra. The mount was different than what I had (mine wasn't angled) but I was able to snap the wiring connector into the existing mount so I didn't have to change anything or drill holes. Installation took less than 5 minutes. Wiring harness on backside connected perfectly. Excellent value considering Toyota would only sell me an entire wiring assembly which was over $200 (if I recall correctly). eTrailer ordering, shipping and follow up from customer service confirming delivery of the part couldn't be beat! 194541



- HM40975

by: Joey C.05/29/2015

2015 Toyota Tundra


My adapter arrived last night. Took about 45 seconds to install on my 2015 Toyota Tundra Double Cab SR5, 4.6L 2WD . Fit perfectly to the already existing wiring in the bumper and snapped right into the hole. It's not listed as OEM for the Tundra, but sure fits like OEM. When I called the dealer to inquire about the part, I was quoted $279 and the parts guy couldn't guarantee the fit--comical. I haven't checked it with a test light yet, but it fit so well, that I cannot imagine it not working properly. ETrailer's customer service is perfect. Thanks guys! 198443



- HM40975

by: Carl03/25/2014

Nissan


Great quality, same as original from Nissan in their SUV's I believe. Only problem is I would have preferred more mounting options without modification or accessory brackets. I am replacing the single 7 contact socket that came on the Nissan with this, and with a stock trailer hitch there is no easy mounting location without a significant modification, either to this mount or the the bumper/hitch itself. That said, it is definitely more convenient to have the 7 contact and the 4 contact in one unit, rather than using adapters. 122251



- HM40975

by: Mark N.08/30/2014

2004 Chevy TrailBlazer


replaced the factory installed bracket on my 2004 trailblazer with this product. after removing the factory installed bracket (a hand-held grinder/cut off wheel made short work of the old bracket), the HM40975 was mounted in the same position...perfect fit. gives me options, 4-pin or 7-pin as far as wire connection to a trailer and is a breeze to use. (it is more accessible than the factory installed bracket was....go figure.) the folks at etrailer were VERY helpful and their service is excellent. thank you etrailer !!!! 149314



- HM40975

by: Danny Jordan03/24/2015

1997 Jeep TJ


This product is of excellent quality! Lithium & dialectric grease as well as awesome materials and engineering went into this plug. Using it to keep water and debris out of my trailer hookups while not in use on my '97 TJ Jeep. I do a job one time and the correct way the first time so I have no future reworks on my projects. Looks to me like the manpower that went into this product shows they mean business and take the same pride in there work as I do. I would highly recomend this product to all of my friends and family. 180746



- HM40975

by: Scott - Colorado01/06/2015

2011 Toyota Tundra


I have a 2011 Tundra - Rock Warrior Package. About a year ago I broke the factory plug driving over difficult work terrain. Toyota wanted $250+ for a new plug.... Needless to say, way too much $$$ It arrived and I removed the old one and this one snapped into place just like the OEM factory one! The Toyota bracket was vertically mounted and I could re-use it so I did not use the bracket that was supplied. Took about 20 Min to get the old one off and new one on! Perfect match for the Tundra! 167881



- HM40975

by: RONNIE R.11/04/2014

2001 Ford


I AM VERY HAPPY WITH THIS TRAILER PLUG. THE INSTALLATION WAS FAST AND EASY. THE DUAL CONNECTOR IS VERY WELL MADE AND LOOKS GREAT ON MY 2001 F150 LARIAT TRUCK. I CAN'T SAY ENOUGH GOOD THINGS ABOUT THIS PRODUCT OR ETRAILER. THE ORDER WAS PROCESSED QUICKLY AND ARRIVED PACKAGED VERY WELL. THANK YOU!!!!! 159297



- HM40975

by: Dale05/27/2014

2013 Ford


Nice product, just as ordered. Not exactly "Plug and Play" on my van as ordered. I will need to get some additional wiring to tie into 2013 Ford E350 van. It may have been a plug and play if the the van had been tow ready from the factory, which it is not. Great service from etrailer.com 132826



- HM40975

by: Bob H09/17/2014

2012 Dodge Ram


I have a 2012 Ram 1500 and the trailer connection was an exact replacement of what was installed by factory.. Fit in the bumper for an exact fit. The original was corroded and the connectors disintegrated. I know now to keep the connectors lubricated often to prevent the corrosion. 151736



- HM40975

by: William09/16/2015

2004 Chevy


Easy to install, just as advertised, direct replacement for my factory installed unit on the 2004 Chevy 2500HD. The factory installed bracket had rusted through completely and I needed to use an adapter (7 to 4) when pulling the boat. This product solved both problems. 225782



- HM40975

by: Wil B06/25/2016

2015 GMC


This is a great product that gives the user the ability to use either 7 pole or 4 pin trailer wiring. I did not use the provided bracket as my 2015 GMC Sierra already had a plug and play option in the rear bumper. The item is exactly like the GM OE version. 264967



- HM40975

by: Joel I04/24/2014

Chevy Suburban


Great product! I have a trailering package on my Suburban with a factory plug, I just unplugged that plugged this in and it works great. With my trailer package I couldn't use the factory mount so this one is mounted next to the factory one. 127209



- HM40975

by: Nicole S.06/28/2016

2014 Nissan Pathfinder


We installed the hidden hitch and the wiring harness for our 2014 pathfinder. We add this additional part because we wanted more than a few zip ties to hold up the plug. This was worth the additional cost and looks nice with our hitch. 265923



- HM40975

by: N dosz06/02/2014

Ford F-250


This product is a 100% match for the Ford oem trailer lighting plug. Mine was broken going thru a car wash. This item fit exactly into the F250 plug harness and the bracket. Makes for a nice and easy repair. Thanks E trailer. 133794



- HM40975

by: Austin M12/18/2014

2003 Chevy Silverado 1500


Fit perfectly on my 2003 Silverado and worked great. Really cleaned up my wiring and now meets my needs for both my boat trailer (flat plug) and livestock trailer (round plug) without the need for an expensive adapter. 166074



- HM40975

by: Jay06/27/2016

2016 Chevrolet


Perfect fit. Plug and play connector for 2016 Chevy Silverado OEM installation. Quality product, nice option for 7 and 4 way connections. Highly recommend this product. 265499



- HM40975

by: Craig11/02/2015

2014 Chevy Silverado


Snapped right into my 2014 Silverado bu mper. 231298



- HM40975

by: Ed S.07/18/2011

Nissan Titan


Mounts well on Titan bumber. Good quali ty. 19648



- HM40975

by: Clint Walter07/21/2013


I just received my package from Etrailer.com and it was nice to open the box and have the right part/part I ordered arrive. Opened up the box staged my parts and started the install. It was very easy with the instructions that were sent and the video on their site that anyone can do this install with no issues. Hitch was on in no less than 15 mins from opening of the box to final torquing of the bolts. The customer service at this company is top notch. I have never had anyone from a company email me before after ordering from them like I did with this company and in business today you are seeing less and less of this type of customer care and service. AWESOME job Guys and Gals I will buy all my accessories from here. 90754



- HM40975

by: David S.06/03/2013


Quality OEM fit.@ substantially lower cost then OEM. 83070


Comments

It appears there is an engineering design defect in this product - at least when installed on my 08 F250. Water from Michigan weather - i.e. rain, snow and car washes continues to find its way into the plug, corroding the contacts and causing a wiring fault. No Im NOT backing into water to unload a boat, Ive removed, cleaned and dried the inside at least three times, covered the contacts and connection points with dielectric grease and carefully sealed the unit w electric tape. Last week, I sprayed the outside of the plug w/ flexible rubber seal yes as seen on TV in my fourth attempt at stopping the water from getting into the plug. This past week, while on a 500 mile road trip we made it through torrential driving rain without experiencing any connection issues. Im keeping my fingers crossed and hoping I dont have to take the plug apart, now that its sealed in the rubber coating!

David S - 06/03/2014

4610

We hope the rubber coating takes care of the problem. If not, we've got a couple of suggestions. You mentioned dielectric grease. If you weren't already, you can be pretty liberal with the application. You can fill the socket and push the connector in and wipe the excess that squirts out. If all the voids are full of grease, there's no place for the water to go. Second, on most of these types of connectors, there is a rubber gasket on the vehicle side that usually stays in, but will sometimes pull out when you remove the cap or the previous 7-way connector. If you still have the cap or old connectory, you may want to check for the gasket.

Patrick B - 6/9/2014




- HM40975

by: Zip in Texas08/06/2013


Excellent quality. Only took 5 minutes to install. Outstanding customer service!! Ordered online on Friday and received via USPS on Monday, with emails letting me know the order was received, the item was shipped, and one that stated that the company had received information that the item had been delivered. And each one was signed by an individual. If only all companies operated this way. 93531


Comments

Works great! Nice to see that there are companies like yours that value customer service and take the time to follow up after a years time. Thank you.

Zip i - 02/20/2015

9614



- HM40975

by: Kevin T.12/04/2014


Excellent price $50.00 cheaper than OEM. Easy installation. Unplugged wiring from OEM blank cover, installed new bumper plug taking approximately 5 minutes. 163380


Comments

Good as new

Kevin T - 01/05/2016

16332



- HM40975

by: Woody Woodford01/03/2013


The part came in ahead of schedule, was exactly what I needed, and works flawlessly. The connection looks indestructible. Installation was absolutely painless. The self-drilling screws worked perfectly in the pre-existing holes too. Thanks etrailer. 62429


Comments

This is just a follow-up to the review I made more than a year ago. The connector for my multiple trailers is still working without problem. I do not expect to ever have to replace this connector, but if I did, or if I get a new truck, etrailer would be my connection supplier. They provide genuine plug-

Woody W - 07/04/2014

5333

- HM40975

by: Zachary G.01/15/2016


Perfect!!! 235563



- HM40975

by: Dave C.02/18/2012


I really like this product. I like that the 7 blade and the 4pin plugs are internally wired. It is truley a 'plug-n-play' unit and even has corrosion preventitive in the pins. The reason I did not give this kit an 'excellent' rating is the mount bracket is too short. This required that a use a 1 inch spacer and longer bolt to attach the mount so the trailer plug could be inserted. 31977



- HM40975

by: Joel W08/22/2014


Had the male. Found a female Pollak 7-4pole Trailer Connector from e trailer On the truck and working good. ps. ground the male to the female a must.. Easy to install. THX Joel in Iowa 148116


Comments

I installed the receiver on my 1981 Ford F250 4x4. Looks and works professional. very pleased.

Joel W - 08/23/2015

14498



- HM40975

by: FOPMAN12/04/2015


The customer service Rep: Lexus G. was extremely helpful in directing me to exactly what I needed! Upon receiving the package, I was impressed with the way that the items where protected for shipping. The overall quality of the Hitch and Trailer Connector Socket where impeccable. The entire removal and installation of both units took no more than 35 Minutes. Thanks to to instructional Video! I am Very impressed with the Company, Service and most of all the Hitch and Light Connector. Thank You so very much eTrailer for everything 233065



- HM40975

by: Jarod08/06/2013


Looks great, be careful with the locking device it is very fragile. Once you lock it don't plan on unlocking it. 93533


Comments

I really like it! It was easy to install and has worked well for me. Sure is nice having both a 7 way and 4 way plug!

Jarod - 03/04/2015

9847



- HM40975

by: JC02/10/2014


I can't believe how fast my product shipped. The part fit perfectly to replace my broken factory cover. It fit right into my bracket and factory connector. 116217


Comments

product works great after 1 year. no problems

JC - 02/10/2015

9400



- HM40975

by: Cliff F.05/28/2013


Great product. Very easy to install. The hardest part of the installation was unplugging the factory harness from the factory connector socket due to the grime build up. A cordless impact driver makes installing the self tapping screws a breeze. The entire installation took approximately 10 min. 82146



- HM40975

by: steve11/04/2013


Cover broke from car wash on the factory connector.Exact same part that Ford wants $60 for. Plus their shipping. Great product. 106181


Comments

Still working as advertised. No problem with product.

steve - 11/04/2014

7569

- HM40975

by: Larry01/26/2016


I have a Ford F-250 truck on which I needed a replacement Pollak 7 and 4 pole connecter socket. The original socket was manufactured by Pollak although the Ford name was engraved. I found the exact part that I needed on the etrailer website. I went to the parts department of my local Ford dealer who had the part in stock. The parts guy said they would match etrailer's price. When I told the him what I would pay for the connecter at etrailer he said that the cost was half of what the dealership pays for the same part. I ordered the part from etrailer and it arrived within a few days. In the future I will buy the parts I need from etrailer. 236297



- HM40975

by: Gregg F.04/08/2011


Thank You for your service and excellent quality parts. The HM40975 Trailer Connector Socket that I received from you exceeded my expectations in both quality and ease of installation. The installation video that you provide is very helpful and makes any job less stressful to undertake. All companies should offer this feature. I look forward to doing more business with you in the near future due to your excellent customer service ! 11317



- HM40975

by: Don R.05/29/2013


Provided self-tapping screws great, if I had a hex-head drill bit large enough to accommodate. Nonetheless, drilled pilot holes, large enough, to allow me to then use socket wrench to drive screws. Connected easily to my vehicles connector, and I'm all set to go. Acid test will be when I actually hook-up to rental trailer's plug. eTrailer order and shipping was right on-the-mark. Information and follow-up was much appreciated. 82306

Show More Reviews
522
522


Customers compare HM40975 to these similar products




Do you have a question about this Custom Fit Vehicle Wiring?









Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com