by: Marvin I03/30/2024

These are the BEST hands down! The originals, a must have if you want to keep your axles in optimum dependability. Easy to install, easy to service, and peace of mine knowing the bearings are greased. Great customer service and knowlageable help with getting the correct size.1756657

Bearing buddies look better than what I have1485017

Jack

12/16/2023

Bearing buddies are nice simple to use but the main thing is to make sure you’re using the correct grease for bearings not just Plain old grease which will work in the short term but not recommended for the long haul

Great product, easy installation. 1770851

Bearing Buddy fit perfectly. Made in the USA still means something!1718830

Ordered these for my 5th wheel trailer 8 days before vacation. They were shipped and received with 3 days to spare. Installation was flawless. Thanks etrailer. Well done!662462

Click to Enlarge

Richard

6/26/2020

Just started our camping season. Pulled the caps off, hooked up the grease gun, pumped some grease and done. Took longer to write this then grease. No pulling the 4 tires to get to the bearings and getting my hands greasy.

Your product arrived on time and undamaged. It installed exactly as described in the literature. I am very pleased with my new Bearing Buddy's. As a side note I noticed a small amount of chrome machining debris inside the hub of the housings. It was easily cleaned out with a rag before installation. These Bearing Buddy's are installed on a 32 year old utility trailer I am refurbishing. Although the trailer is small (4 x 8) it has a 5000# axle and has seen some pretty tough use. Ive attached a pic of the trailer undergoing refurbishment along with a couple of pics of the installed Bearing Buddy's. Excellent product and service!107659

Click to Enlarge

Click to Enlarge

Click to Enlarge

This product is as good as their rep have used them before on a
boat trailer never had a bearing go out as long as I used the
buddy bearings they are great! Service was just as good.
These bearings were installed on a heavy duty low boy trailer.
No pictures trailer is in South Texas about 300 miles from my location. Hauling oil field equipment. Picture of the trailer being
overhauled before new fenders were added.67986

Click to Enlarge

Product as advertised, shipping speed was not fast but reasonable I think, shipping charge was very reasonable1737935

These buddies have the correct depth and the slip on contact area is not chrome so the buddies holds tight.1721749

by: Dylan04/20/2023

Work great, have absolutely no problems with these bearing caps. Work much better than the etrailer brand caps I ordered at the exact same time for my other trailer.1560312

by: James 04/14/2023

Great product but I always have issues with the rubber caps coming off once they get a year or 2 of age on them,1556442

Great for, I didn’t realize I had the ez lube axles and didn’t need these. I really like the covers better than the cheaper ones. I removed the inner zero assembly so I can use these as caps. Much thicker material and better looking.1454480

Bearing buddies showed up with one missing, emailed CS and they shipped out two more! Emailed back that I only needed one and to send me a RAN.
Great experience and will use etrailer for further purchases.1425901

While we only just received out bearing buddies. They are as described and installed easily. The only trouble was the beauty covers don't fit over the hubs any longer. Doesn't really matter as the product is attractive. The wheel studs not so much but we can live with that.
I will have to write another review after we have taken a few trips and greased things up a bit.405126

I recently upgraded to electric over hydraulic disk brakes from the hydraulic drum surge brakes that were on my boat trailer when I bought it. I scoured the web site and put together a list of parts for the conversion but still had a few questions. Lisa was most helpful and had some additional suggestions. She made my etrailer.com shopping experience the best online shopping experience ever. Once I had the brake parts I found my old Bearing Buddies didn't fit the new hubs so I ordered new Bearing Buddies and new coupler while I was at it. I ordered them on Sat. and they arrived today, Tuesday. I already have the new parts on and they are working perfectly. Thanks etrailer.com and thanks Lisa. You have a new customer for life.372263

by: Virgel07/08/2021

They fit perfect. Took a 5000 mile trip this summer and was glad I had the option of applying grease to the bearings.1087078

Virgel

7/10/2022

Still working a year later however a side note. Do not over grease as it will leak onto the inside of the drum and prevent the brakes from grabbing.

I put 4 of these on my 26' fifth wheel. The installation was very easy and exactly as described. I tapped them gently with a hammer to get them started and then used a block of wood and hammer to seat them fully for a nice tight fit. 255676

Nice item and very easy to install, trouble free traveling. 240923

Click to Enlarge

Click to Enlarge

by: Doyle C.10/06/2019

Putting off greasing wheel bearings is so easy to do. Bearing Buddies make greasing wheel bearings easy because they give incentive. Only takes 5 minutes vs a couple of hours. Being on the side of the road with a break down from bad bearings isn't fun and totally preventable.716090

Haven't put it on yet,but the service and the tome it took to get it was excellent. Went to the dealer to get a buddy bearing they were all you need the Vin number of your trailer and what kind of axle it has,went Google Drive it and 3 minutes later had it ordered 6 days later I had it.286325

by: Bill F09/08/2017

Lost one cap and the old ones were from a 2000 trailer. Working fine. good product.430274

Bill F.

9/8/2018

no problems, have traveled locally and to different states.

The product and the service was exceptional. The Buddy Bearings fit exactly and were easy to install. The items arrived in a few days through the US mal without any problems. It was really nice to be able to track my order so I'd know when it was arriving. I will be ordering any additional items needed from etrailer.com because they actually had the best price I could find.576656

I've been using Bearing Buddies on my boat trailers since the early 80's and never had a trailer bearing fail. These are still the best solution to protect any bearings that get submerged. Make sure they are pumped up before each submergence and everything will last forever.808703

by: Bryan11/20/2018

I work as a fisheries biologist for a state agency and travel hundreds of miles every week with my boat. These bearing buddies and other bearing products have worked great and were a huge upgrade over other trailer hub products I've had in the past. So far no issues.584286

Product arrive on time and in good cond. Fit and finish great recommend that anyone ordering these make sure u use a digital caliper as fit is critical . I wasn't able to find these local not even Napa carried this size so I did a search and found etrailer.com and they gave all the sizes so finding a match was easy.. Great product and great service.. Thanks Dave.94180