This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
258003

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.410599

Richard E.

7/25/2018

Fine sold the truck to neighbor who makes good use of it with camper.

by: Chuck B02/22/2017

As has been widely reported this thing does not fit "snugly" into the 2 & 1/2" hitch receiver. Because the reducer sleeve is not a "snug" fit it rattles around a bit and is showing signs of wear around the pin hole. Fortunately I bought a 2 & 1/2" shank instead of relying solely on the reducer.344593

Wish these adapters were longer, but it gets the job done with some extra rattle from the sloppy fit. It will get me by till I get a better fitting 2 1/2" draw bar.1017058

Sierra K.

4/21/2021

Thank you for your review. All adapters will fit a little differently depending on the powder coat finish. Sometimes even, there is too much and it needs filed. In your case because you have some play you can always pair it with an anti-rattle device.

by: Dave D.08/09/2019

Over the last couple of years, I have purchased different parts for my towing needs from etrailer.com. The parts have ranged from hitch adapters to trailer tires. The customer service from Crystal K., and the quality of the products from etrailer.com have all been the very best that you could expect. I highly recommend that you at least consider etrailer.com for anything that you may need when you are towing or RV'ing. 682835

I ordered 2 hitch adapters (sleeves) an a hitch pin from etrailer over the phone because I could not find mine and I wanted to get these shipped quickly before I left on my hunting trip a few days later. I called late in the day, about an hour before closing, but Cathy still worked magic and got my shipment put together and on the truck that night! My items arrived a couple of hours before I planned to leave. Cathy saved the beginning of my trip!

For the review of the 2 square pieces of metal tubing --- they worked great :-). This review is for the outstanding customer service I've experienced each time I've ordered anything from etrailer.com, but especially this time from Cathy.
310692

This is just perfect. When I bought my new truck I was very surprised that I now had a 2-1/2 inch hitch receiver. Of course my 2 inch hitches and accessories didn't fit plus I had to get another receiver pin to fit the 2-1/2. I will have to say etrailers on-line was a great experience. They had what I needed and the prices were very reasonable. Thanks. I will definitely be back for more trailer accessories.99359

The part itself is just like the way it was described. I have a 2011 F-250, I read in the reviews that the piece wouldn't slide in unless some of the corner were ground down, with this information I didn't think it would be a big deal. I have not used it yet. I slid the part into my hitch and it fit, in my opinion a little too loose, I also slid it into my reciever and it too seemed a little too loose fitting. May have to buy a 2 1/2 receiver instead.109098

Reducer worked great for my GMC 2 1/2 inch hitch. Received Blue Ox Sway Pro WD 2" hitch with no problems. Used the 2 1/2 inch hitch lock to secure everything in place. Very little movement and fit snug as a bug. Great Product. Fast Shipping. As always Amazing customer service! 132660

The part fit up in a 2 1/2" receiver on a F250 without issue, despite multiple reports that some massaging might be needed to fit the factory hitch. Normally, I would give this 5 stars and the product, while not complex, works as advertised. The 4 star rating is due to the country of origin - China. 145099

This adapter saved me from replacing all of my 2" hitches when I bought my 2012 chevy 2500hd. You will need a longer pin, but works quite well. It fits great, but does have a little slack. That may be because my hitch has some wear on it. Works perfectly. 114226

I bought this to use a bike carrier in my 2 1/2 inch Curt hitch receiver. Fit perfectly on the bike carrier and into the 2 1/2 inch receiver. Katie D. did a great job making sure that it would fit without potential modification warned for Ford factory hitches.172284

Very snug fit into my 2.5" receiver and accepted the 2" drawbar nicely. There is almost no side to side movement which my anti rattle pin will take care of but there is up and down play in it. I think my drawbar isn't quite 2" sqaure because this piece definitely is. 143760

Received this reducer within 4 days of ordering it which was impressive. Installed into my receiver and am very satisfied. I can feel just so ever lightly a little play but nothing that would ever cause me concern pulling our 37" travel trailer. Upon installing the ball hitch into this again very very little play if any.311706

LIKE A GLOVE - 2019 F250 Lariat - Ordered as a reduction sleeve for my new trucks Class V trailer hitch. Received this very quickly and this part is BEEFY.. I Just removed the sticky label and inserted into the 2 1/2" hitch receptical, added the pin to secure it. DONE.

609190

by: Scott03/24/2017

Have used the adapter for a year now and have had no issues. The unit wiggles a little when in place but I image that is necessary for it to slide into place correctly. The unit does not wiggle once connected to the trailer and I can't hear any noises coming from the hitch when towing. I would buy this unit again.358055

I expected the Reese Titan Reducer Sleeve 21/2 Reducer sleeve to be a very tight fit for my stock 2011 F250 Super Duty hitch. Instead, it fit a little too easy with some slop. Don't like the slop, therefore, I rated as only Good.140768

Fit perfectly on my 2016 Ford F350 Dually. 487489

Click to Enlarge

Purchased this item for my new 2011 F250 that, following the big 3 towing wars, now coms with a 2.5" reciever. This will not fit into stock 2.5" recievers as it has a heavy coating of paint. Be ready to grind paint off to get it to fit into your reciever! We'll see how long it lasts uncoated.8882

Patrick B.

11/21/2012

Newer Ford 2.5 inch receivers use a tighter corner radius than most so these adapters often need to have the finish removed at the corners to fit.

Image attached 439381

Click to Enlarge

Does what is says reduces the opening on the ford titan hitch. The drilled thru hole should be just a 1/8 inch towards the rear more so it is flush on the hitch opening when inserted, but doesn't affect anything.770821

Purchased for a 2017 Ford F250 with factory 2 1/2" receiver. Fits perfectly right out of the box. Some reviewers mentioned that they had to file the edges a bit, but I did not. Excellent quality, excellent fit.425795

Perfect fit. No trouble at all installing either the pin or my 2" ball mount hitch. A previous sleeve I bought locally wouldn't even slide into the 2-1/2" receiver, but that wasn't the case with the Reese Titan reducer.12195

The quality of this item is good, but there is way too much play between the both the sleeve, the receiver tube, and the ball mount. I would say that my ball moves up-to-down and side-to-side 3/4" at the tip. I am going to have to make some shims just to tighten the tolerance so the receiver won't CLUNK everytime I stop or hit a bump.24691

I received my item today. The online purchase was easy and the product was well described. Tracking was great with their order tracking system. My order arrived on time and exactly when promised. The product works great. Thank you Etrailer.com 643613