Your vehicle may be hardwired using the accessories below when a T-One connector is not available.

Due to the LED taillights, the following powered converters are recommended for your vehicle. For more information see below.

etrailer.com recommends the Circuit Protected Powered Taillight Converter with Installation Kit (# 118176KIT) for your vehicle. If your trailer has a lot of lights, see our chart at the bottom of the page to help select the wiring harness that will work best for your application.

LED System

Sort By: Please Select.... Best Selling Newest Lowest Price Highest Price Name a-z Name z-a Show All

	Modulite Protector, Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector Code: 118176 Price: $49.95  Quantity in Cart: none Capacity: 8.4 amps. An upgrade to the original, the 18176 Modulite harness offers more peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. Rated at 4.2 amps for...more
	Circuit Protected Modulite 4 Pole Harness with Hardwire Kit (Includes Testers) Code: 118176KIT Price: $64.95  Quantity in Cart: none Capacity: 8.4 amps. This kit uses the 118176 circuit protected Modulite powered converter and includes everything necessary for installation on your vehicle....more
	Modulite Installation Wiring Kit Code: 118151 Price: $9.95  Quantity in Cart: none This kit provides the wire that needs to be run to the vehicle battery to power the lights on the trailer. The kit works will all Modulite wiring harnesses and includes the necessary ring terminals and connectors to complete the installation of the...more
	Modulite Lite Trailer Light Module Code: 118187 Price: $39.95  Quantity in Cart: none Capacity: 8.4 amps. While the HD is manufactured for more, the Modulite Lite is manufactured for less. This Modulite Lite module is for use when your small utility trailer has only one taillight and one side marker...more
	Upgraded Modulite Vehicle Wiring Harness with 4 Pole Trailer Connector Code: 119146 Price: $44.95  Quantity in Cart: none Show Details
	Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector Code: 119176 Price: $49.95  Quantity in Cart: none Show Details
	Upgraded Circuit Protected Modulite with 4 Pole Harness with Hardwire Kit - Includes Testers Code: 119186 Price: $69.95  Quantity in Cart: none Show Details

Choosing the Right Wiring Harness

In order to choose the correct wiring harness for your vehicle you first must know how many lights are on the trailer you will be pulling.  The number of lights determine the number of amps that the trailer is going to be drawing from the vehicle's wiring system.  Standard Taillights usually require 2 amps per light.  Clearance and Reverse lights take 0.5 amps per bulb.  Some clearance and reverse lights have 2 bulbs.

Lights on the Trailer	Total Amps	Suggested Wiring Harness
	8.4 amps 2.1 Turn/Stop 4.2 Tail	118176KIT Circuit Protected Modulite with Install Kit 18187 Modulite Lite