Your vehicle may be hardwired using the accessories below when a T-One connector is not available.

These accessories are for use when your vehicle manufacturer recommends the use of a powered trailer wiring system, but it is not required in all situations. For more information see below.

The lighting system on utility trailers require that the turn signal and brake signal be sent along the same wire. Because this vehicle has seperate turn and brake wires, a converter is required. Two types of converters exist, the standard converter and the powered converter (a.k.a. Modulite). A standard converter is spliced into and draws power directly from the vehicle's wiring system. Powered converters (Modulites) are also spliced into the vehicle's wiring system to get the signal, but the power for the trailer lights is drawn directly from the vehicle battery. This bypasses all the expensive electrical components on the vehicle and reduces the strain on the wiring system. Circuit protection further safeguards the vehicle and the module itself from mis-wired trailers. For more information see our wiring faq page.

etrailer.com recommends the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit (# 119176KIT) for your vehicle. If your trailer has a lot of lights, see our chart below to help select the wiring harness that will work best for your application.

Powered System

Sort By: Please Select.... Best Selling Newest Lowest Price Highest Price Name a-z Name z-a Show All

	Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector Code: 119176 Price: $49.95 Quantity in Cart: none Capacity: 9.8 amps. An upgrade to the original, the 119176 Modulite harness offers peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. The upgrade also includes...more
	Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes Testers Code: 119176KIT Price: $69.95 Quantity in Cart: none Capacity: 9.8 amps. This kit uses the 119176 upgraded, circuit protected Modulite powered converter and includes everything necessary for installation on your vehicle....more
	Modulite Lite Trailer Light Module Code: 118187 Price: $39.95 Quantity in Cart: none Show Details
	Modulite Installation Wiring Kit Code: 118151 Price: $9.95 Quantity in Cart: none This kit provides the wire that needs to be run to the vehicle battery to power the lights on the trailer. The kit works will all Modulite wiring harnesses and includes the necessary ring terminals and connectors to complete the installation of the...more
	Upgraded Modulite Vehicle Wiring Harness with 4 Pole Trailer Connector Code: 119146 Price: $44.95 Quantity in Cart: none Capacity: 11.7 amps. An upgrade to the original, the 119146 Modulite harness offers peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. The upgrade also includes...more

Choosing the Right Wiring Harness

In order to choose the correct wiring harness for your vehicle you first must know how many lights are on the trailer you will be pulling.  The number of lights determine the number of amps that the trailer is going to be drawing from the vehicle's wiring system.  Standard Taillights usually require 2 amps per light.  Clearance and Reverse lights take 0.5 amps per bulb.  Some clearance and reverse lights have 2 bulbs.

Lights on the Trailer	Total Amps	Suggested Wiring Harness
	6.2 amps 2.1 Turn/Stop 2 Tail	119175KIT Circuit Protected Converter with Install Kit
	9.2 amps 2.1 Turn/Stop 5 Tail	119146 Standard Modulite 119176KIT Upgraded Circuit Protected Modulite with Install Kit
	15.9 amps 4.2 Turn/Stop 7.5 Tail	119190 Upgraded Circuit-Protected Modulite
	24 amps 8.0 Turn/Stop 8.0 Tail	36365 Short Proof Powered Converter