bing tracking image

Best Toyota Camry Cargo Carriers

change vehicle


Cargo Carriers Videos

Surco Products Hitch Cargo Carrier Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry we're going to be test fitting the Surco cargo carrier, part number 52017. This is going to be 20 by 48 and has a carrying capacity of 300 pounds. It also has this mesh floor at the bottom which makes it easy to clean. It has this railing all the way around the cargo carrier. Then you can use that as tie down points for either your ratchet straps or your bungee cords. I'm going to give you a couple quick measurements now. Measure from the edge of the bumper to our outer point here, we've added about 26" to the rear of the vehicle.



Rola 21x55 Hitch Cargo Carrier Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry we're going to be test fitting the 21 by 55 ROLA cargo carrier for 1-1/4" hitches, part number 59507. This cargo carrier has a carrying capacity of 300 pounds. It has this mesh floor here which makes it easy to clean. It also has points around the cargo carrier itself to tie down either ratchet straps or bungee cords. A couple measurements to give you here, from the edge of the bumper to our outer edge we've added about 30-1/2" to the rear of the vehicle. Our ground clearance is going to be about 14-1/2". Our closest point is going to be about 6-1/2" to this edge here.



Curt Hitch Cargo Carrier Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry we're going to be test fitting the 20 by 48 CURT cargo carrier for 1-1/4" and 2" hitches, part number C18110. This has a carrying capacity of 300 pounds. It has this mesh floor in the bottom which makes it easy to clean. All the way around the cargo carrier we have these tie down points for your ratchet straps or your bungee cords. With the cargo carrier in this position, I'm going to give you a couple quick measurements. Measuring from the edge of the bumper to our outer edge here, we've added about 28" to the rear of the vehicle. Our ground clearance is going to be about 13".



Curt Roof Basket Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry, we're doing a test fit of the Curt Roof Mounted Cargo Basket. This is 41 and 1/2 inches long, by 37 inches wide, by 4 inches deep. It has a weight capacity of 150 pounds. Now, you do want to check with your vehicle's owners manual. Make sure your roof can withstand that much weight. The part number for this is C18115. Now, we already have 3 of our 4 feet secured down.



Rhino Rack Roof Basket Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry we're doing a test fit of the Rhino Rack roof-mounted steel cargo basket. That part number is RMCB. This is 47" long by 35" wide and has a 165 pound weight capacity. Now you do want to check your vehicle's owner's manual to make sure it can withstand that much weight. We already have three of our four mounts secured in place. We're going to show you our back one on our passenger side here.



Thule Roof Basket Review - 2017 Toyota Camry

Today on our 2017 Toyota Camry we're doing a test fit of the Thule Canyon XT Roof Mounted Cargo Basket. This is 49" by 40" by 6" deep and it has a 150-lb weight capacity, although it does have that weight capacity, you do want to check your vehicle's owners manual to see if it can withstand that much weight. The part number for this is TH859XT. We already have 3 of our 4 mounts secured down in place, we're going to show you our last 1 here. I've gone ahead and adjusted our brackets using the included tool to loosen up our 2 bolts there. Adjust these for our crossbar spread and then tighten them down. A great thing about this basket is that it does come with 3 different sets of hardware, small, medium, and large.



Rola 21x55 Hitch Cargo Carrier Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're doing a test fit of the ROLA 21 by 55 cargo carrier. That part number is 59507. Now this is designed to work with 1-1/4" hitches only and has a 300 pound weight capacity. We're going to start off with some measurements, ground clearance being first. We're going to have about 13". Overall to our vehicle we're going to have about 30-1/2".



Rola 21x55 Hitch Cargo Carrier Review - 2012 Toyota Camry

Today on our 2012 Toyota Camry, we going to be taking a look at the Roller Cargo Carrier . Part Number 59507. This Cargo Carrier has a 21 by 55 dimension, that's in inches; and has a 300 lb weight capacity. So we'll start off by giving a few measurements of how this interacts with our Camry. Our closest distance, if this we're to go in too far, its actually going to make contact right here at the bend in our shank; and that's going to be at about 3 inches and 3 quarters, but from our bumper to the front of our Carrier is going to be about 6 and 3 quarters of an inch. The overall distance that we've added to the length of our Camry, would be about 30 and a 1/2 inches and our ground clearance to the bottom back here would be about 14 inches. The Exhaust Exits on the passenger side (and our Carrier does sit a little bit above that), but just in case you are carrying anything that is heat sensitive or perishable; the distance from the end of the exhaust to our Carrier is about a foot and a 1/2 or 12 and a 1/2 inches, so just keep that in mind. We won't have any interference with our Trunk being open, but just so you can see that; you can get in there with your Cargo Carrier installed and there shouldn't be any interference with anything that you might have stacked up on your Carrier. That will do it for our look at the Roller Cargo Carrier for Class Two Hitches . Part Number 59507 on our 2012 Toyota Camry. Let's see how our Carrier did when we had it out on our Test Course. Here you see it out on our Test Course. First we go through the slalom which will show you the side-to-side action, such as making turns or evasive maneuvers. Next we'll show you the alternating speed bumps, which would show the twisting action like you might see going over uneven pavement or hitting a pot-hole, or maybe running over a curb. Last but not least we go over the solid speed bumps which would show you the up-and-down action such as going through a driveway or parking lot. .



Surco Products Hitch Cargo Carrier Review - 2012 Toyota Camry

Today on our 2012 Toyota Camry, we're going to be taking a look at the circo cargo carrier for 1 1/4" hitches. Part number 52017. The dimensions of our carrier will be 48" by 20". To start off we'll get a few measurements so you can see how this interacts with our Camry. The closest distance from the back of our bumper to the front of our cargo carrier will be about 4 3/4". Overall distance will be about 25 1/2" and our ground clearance will be about 9 1/4".



Curt Hitch Cargo Carrier Review - 2012 Toyota Camry

Today on our 2012 Toyota Camry, we'll be test-fitting part number c18145, the Curt 20x48 cargo carrier. To begin our test fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With the bolt tightened, this is how our cargo carrier would look like on your vehicle. Now, well give you some measurements. Form the closest point of the cargo carrier's side to the back of the vehicle is 4 inches. The exhaust on the Camry exits the passenger rear and is approximately 8 inches from the cargo carrier so there may be some heat transfer while driving down the road.



Surco Products Hitch Cargo Carrier Review - 2008 Toyota Camry

Today on our 2008 Toyota Camry we're doing a test fit of the Surco 20 by 48 cargo carrier. That part number is 52017. Now this is designed to work with 1-1/4" hitches only and has a weight capacity of 300 pounds. Now although it does have a pretty high weight capacity, it is very lightweight so it's easy to lift up and put into your hitch. The first thing we're going to do is take a few measurements here. First one's going to be ground clearance at about 8-3/4". Overall to our vehicle we're adding about 24-1/4".



Rola 21x55 Hitch Cargo Carrier Review - 2008 Toyota Camry

Today on our 2008 Toyota Camry we're doing a test fit of the Rola 21 by 55 cargo carrier. That part number if 59507. Now this has a weight capacity of 300 pounds and works with 1-1/4 hitches only. The first thing we're going to do while it's installed on our vehicle is take a few measurements. Starting off with our ground clearance, we're going to have about 13 inches. Overall to our vehicle we're going to have about 28 inches, and our closest point here is going to be about 3-3/4 inches away. Now, on our Camry we do have a single passenger side exhaust. Although it's underneath our carrier, it does come straight out so it's about 10-3/4 inches away here, so if you're worried about heat-sensitive materials, I would keep that either inside your vehicle or closer to the driver's side. Next, we'll pop our trunk and check that breakover point.



Surco Products Hitch Cargo Carrier Review - 2007 Toyota Camry

Today on our 2007 Toyota Camry, we're going to be taking a look at the 20"x48" Surco Cargo Carrier. Part number 52017. This has a nice mesh floor, which makes it easy to clean and also has this rail all the way around the cargo carrier here which can serve as a tie-down point for either your ratchet straps or your bungee cords. It has a carrying capacity of 300lbs. Let's go ahead and give you a couple quick measurements here. From the edge of the bumper to our outer edge here, we've added about 23-1/2" to the rear of the vehicle. For our ground clearance, we're adding about 9". For our closest point, this edge here, we're at about 2-1/4".





Toyota Camry Cargo Carriers Questions