1992 Chevrolet Suburban Brake Controllers with Custom Fit Wiring Harness

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller automatically levels when mounted within a 70-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Easy-to-use brake controller activates your trailer brakes electronically when you engage the brakes in your tow vehicle. Set braking intensity to your preference and towing application.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller can be mounted within a 90-degree vertical range. LED monitor indicates braking action of trailer. Fine-tune power adjustment lets you set braking intensity to suit your towing needs.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Digital display is simple to read. Power output and braking aggressiveness are easily adjustable. Includes manual override.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable to suit your preference. Includes manual override.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable. Includes LED display and manual override.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller automatically levels when mounted within a 180-degree vertical range and 60-degree horizontal range. Includes 9 boost levels for ultimate adjustability; easy-to-read, scrolling LCD display; and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Digital display, manual override, and a simple, plug-in port included. Power output and braking aggressiveness are adjustable.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable. Includes easy-to-read digital display and manual override.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range and a 40-degree horizontal range. Includes digital display, 9 sensitivity settings, reverse-polarity protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller can be mounted within a 360-degree vertical range. Digital display indicates braking action of trailer. Fine-tune power adjustment has 5 levels so that you can set braking intensity to suit your towing needs.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range and a 40-degree horizontal range. Includes digital display, 4 boost levels, reverse-polarity protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($64.80) to install your controller. You may also need a 4-Way connector.

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # ETBC7 is still recommended.