Expert Answers about Wiring
Parts Needed to Install a Trailer Brake Controller on a 2006 Jeep Liberty- On a 2006 Jeep Liberty installing a brake controller requires that it be hardwired to the vehicle. hardwiring is not vehicle specific so you can follow along with any video showing installation using a 4 and 7 way installation kit # ETBC7. I have linked a video for you to view.
If your Liberty came with a factory 7-Way, you can still use the video as a guide but you would not need the ETBC7 kit. Instead you would need kit # 5505 if the trailer has 2 to 4 brakes or # 5506 if the trailer has 6
view full answer...
- Which Wiring Harness Do I Need for Jeep Cherokee 2001 to Hook A Rockwood Freedom Camper With 6-Way
- The item you selected, Adapter 4 Way Flat to 6 Way Square for Jayco, part # 30104 may work, but the wire functions may be incorrect, and would require you to wire the adapter by function using circuit tester, part # 3808.
I would recommend changing your vehicle and trailer wiring to 6-Way Round. For your Jeep you will need, Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter, part # 37175. Then, for your trailer, you will need Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Traile
view full answer...
- Parts to Convert a 4-Way Flat Trailer Connector to a 6-Way Round on a 2008 Jeep Rubicon Unlmited
- We have a brake controller wiring kit, part # ETBC6, that will allow you to convert your 4-Way to a 6-Way round. This kit includes everything you need to convert your 4-Way and install a brake controller.
You would connect your 4-Way to the 4-Way on the back of the ETBC6. Next you would ground the white wire. You would extend the blue wire up to the cab for the brake controller output. The red wire would then be connected to your reverse light circuit or run up to the battery for a 12V power
view full answer...
