Expert Answers about Vehicle Trim
Chrome Mirrors Covers for a 2012 Ford F-350- For mirror trim for your 2012 Ford F-350, if the truck has a turn signal on the mirror use # P400123. If the mirrors do not have a turn signal on them use # P401175.
view full answer...
- Dimensions of Bully Chrome Plated Fuel Door GD-801CK
- I pulled the Bully chrome-plated fuel door # GD-801CK from the warehouse, and it is 7-1/8 inches across. The mounting holes are 4-7/16 inches apart on center.
I am including a diagram showing the points I measured. This fuel door is custom fit for the 1997 through 2006 Jeep Wrangler and Jeep Wrangler Unlimited.
view full answer...
- Installation Procedures for Pilot Bully Chrome Plated Fuel Door # GD-302C on 2008 Dodge Ram Pickup
- The Pilot Bully Chrome Plated Fuel Door # GD-302C is pretty easy to install and comes with easy-to-read instructions. I have posted a video explaining the installation process for your 2008 Dodge Ram Pickup.
You will need a 4 mm Allen wrench, a T-30 Torx driver, a 10 mm open-end wrench, and a Phillips screwdriver for the installation. The fuel door comes with all the mounting hardware necessary such as nuts, spacers, etc. You will remove the existing fuel door by removing the bolts that holds
view full answer...
- How Much of the Tires is Covered When Using EGR Fender Flares, Part # 753044, on 2003 Expedition
- The EGR Custom Molded Fender Flares, part # 753044, fit a number of Ford pickup trucks but are not intended for use on the 2003 Ford Expedition.
The closest item we have that is compatible with your Expedition is the Putco Fender Trim Kit for the 2003 Ford Expedition, part # P97209, which is a stainless steel trim kit for all four fenders. It comes complete with all required stainless steel hardware and installs without any drilling. This item is protected by a Lifetime Warranty from Putco.
view full answer...
- Does the Putco Air Dam Covers Include a Vortec Logo for a 2012 Chevy Silverado
- There is actually a cutout in the air dam cover # P403523 for the Vortec logo that should already be present on the truck. Take a look at the picture I have included to see the cutout. A logo is not included with the covers.
view full answer...
- Quality and Material of the Putco Chrome Fuel-Tank Door Cover for a 2012 Toyota FJ Cruiser
- The Putco Chrome Fuel-Tank Door Cover, # P400937, is made of automotive grade ABS plastic and is then chrome plated. This cover is durable and will withstand normal environmental and driving conditions. Like any chrome accessory, it can be chipped if struck the right way but cracking and peeling should not be an issue. I have included a link to the installation details for you.
view full answer...
- Putco Chrome Door Handle Background Inserts for a 2012 Dodge Ram Crew or Quad Cab
- For a 2012 Dodge Ram Crew Cab 2500 or 3500, use # P402019B. If your 2012 Dodge Ram is a Quad Cab as opposed to a crew cab, you would also use # P402019B. I have included an installation instruction link for you to view.
view full answer...
- Will Putco Chrome Head-Lamp Overlays # P401270 Fit 2012 Jeep Wrangler Unlimited
- After consulting my source at Putco, I can confirm the Putco Chrome Head-Lamp Overlays # P401270 comes in pairs for your 2012 Jeep Wrangler Unlimited. I have linked instruction details for the proper installation of this item on your vehicle.
view full answer...
- How Many Pieces and How Tall are the Putco Rocker Panels for a 2012 Dodge Ram 3500 Big Horn
- The Putco rocker panels, # P9751317, are custom fit for the 2010 to 2012 Dodge Ram 2500 and 3500 series crew cab models with a short bed. There are a total of 12 pieces, 6 for each side. Since they are a custom fit product they will fit the contours of the truck. The panels are 5.5 inches tall.
From what I could find, the Big Horn is just a certain grouping of options, most related to the interior of the vehicle, and should not affect the fit of the rocker panels. the only fit issue could be
view full answer...
- How Do the HighRock Fender Flares install on a 2007 Jeep Wrangler Unlimited
- We have not yet had the chance to install the fender flares on a Jeep yet so I do not have a video I could link you to. We do have the instructions which will tell you exactly how the fender flares install on the vehicle. I have included a link to the instructions for you. They literally install over the factory fender flares.
view full answer...
- Will Fender Trim Fit a 2012 Chevy Silverado with Factory Mud Flaps
- The only fender trim we have for the 2012 Chevy Silverado is from Putco, # P97289. As long as the mud flaps are factory, our contact tells us that they will fit the vehicle. There will be a small gap between the mud flaps and the fender well after installation.
You will need to remove the mud flaps on your truck to install the trim and then you will attach the mudflaps on top of the trim piece.
view full answer...
- Door Handle Covers for 2011 Ford F150
- The part you referenced, # P401027 is actually a tailgate handle which is sold individually.
We do carry kits for the door handles, some of which include 4 handle covers.
If you click on the provided link, you can see the various door handle covers available for your 2011 F150.
view full answer...
- Installing Stainless Steel Fender Trim on a 2009 Chevrolet Silverado 2500 HD With Stock Mud Flaps
- I spoke with my contact at Putco and he said the Stainless Steel Fender Trim, # P97289, will work with the stock mud flaps on your 2009 Chevrolet Silverado 2500 HD, but there will be a small gap between the mud flaps and the fender well after installation.
For installation you will need to remove the mud flaps on your truck to install the trim and then you will attach the mudflaps on top of the trim piece.
view full answer...
- Putco Rocker Panels for a 2012 Dodge Ram 3500 Crew Cab
- I spoke with my contact at Putco and the Rocker Panels, part # P9751317, will fit your 2012 Dodge Ram 3500 Crew Cab with a 6 ft and 4 inch box. I have included a link to the installation details for you as well.
view full answer...
- 2012 Dodge Journey Chrome Door Handle Cover
- I spoke with my contact at Putco and he said that they have done actual testing on the 2012 Dodge Journey and their chrome door handle covers, # P402230, are the correct fit for your vehicle.
Since you believe that your door handles may be different, I added a photo of the door handle on a 2011 Dodge Journey SXT, see link. You can compare the photo to your vehicle door handles to see if they are the same or not.
view full answer...
- Fit of Pilot Automotive Polished Stainless Fender Trim Kit # WF-2211 on 2002 Chevy S-10 Stepside
- According to our friends at Pilot Automotive, the Polished Stainless Fender Trim Kit you referenced, part # WF-2211 will indeed fit the rear wheel wells on the stepside bed of your 2002 Chevy S-10.
view full answer...
- Will The Pilot Novelty Air Vent # TT-009 Fit the Fender on My 2011 Hyundai Sonata
- The item you selected, Pilot Novelty Air Vent, part # TT-009, is a universal fit item designed to fit a wide range of vehicles.
Part # TT-009 attaches to your fender using 3M double-sided tape. The Novelty Air Vent measures 11 inches long and is 3-1/4 inches tall.
view full answer...
- Is Chrome Trim Raised or Flat on Putco Chrome Tailgate Accent # P403413 For 2004 GMC Sierra Truck
- I contacted our representative at Putco about the Putco Chrome Tailgate Accent # P403413. The representative at Putco informed me that this chrome trim piece does have a raised curve to the center. The # P403413 installs with double sided tape and will fit your 2004 GMC Sierra.
To go along with the Chrome Tailgate Accent, you may also be interested in the Putco Chrome Tailgate Handle, part # P400017. The # P40017 covers the entire handle and trim of the tailgate handle.
We do not have any
view full answer...
- Will the Putco Chrome Body Side Molding for a GMC Yukon XL Go Over Existing Body Molding
- This Putco Chrome Body Side Molding # P403531 that you referenced will go over the current molding that is on your GMC Yukon XL. This product is made from ABS plastic which is a very rigid plastic that will snugly fit over the existing molding.
I attached installation instructions for this product for you to check out also.
view full answer...
- Fender Trim Kit for a 2007 Dodge Ram 3500 Dually
- If your 2007 Dodge Ram 3500 Dually is a regular cab or Quad cab model, you can use the Putco Stainless Steel Fender Trim, # P97303. We have not yet had the chance to install this trim kit on a vehicle so we do not have any additional pictures.
view full answer...
- Tailgate Handle Trim Options for a 2010 GMC Sierra 1500
- All of the tailgate trim pieces we have for a 2010 GMC Sierra include both a handle portion and the surrounding bezel. I have included a link to the options for you to take a look at. The pieces are held on with 3M tape so if you were just to use the handle portion, it will stay on.
As far as how it will look it is hard to say because I have only seen them with the bezel piece included. What you could do is put on the handle portion and see what you think of it before applying the bezel port
view full answer...
- Are the Putco Chrome Rear-Hatch Hinge Covers Sold In Pairs for a 2003 Hyundai Santa Fe
- I spoke with my contact at Putco to verify and the Putco Chrome Rear-Hatch Hinge Covers, # P408110, are sold in pairs. So you would receive a total of 2 covers. I have included a link to the installation details for you. I have also included a link to all of the trim we carry for a 2003 Hyundai Santa Fe.
view full answer...
- Chrome Fuel Door Cover for a 1999 Ford F-250 Super Duty
- For a 1999 Ford F-250 Super Duty, you would need Bully Chrome Plated Billet Fuel Door with Lock, # GD-201CK. To install this cover, basically you will just need to remove the old door and rubber door stops and install the new one in its place using the included hardware. There are spacers included that go between the attachment point of the truck and the back of the cover to allow for proper spacing. The cover does come with installation instructions.
view full answer...
- Will the EGR Rugged Look Fender Flares # 751524 Fit on a 2001 GMC Sierra 4x4 Extended Cab 6 Foot Bed
- Yes the 4 Piece EGR Custom Molded Fender Flares, # 751524, are custom fit for your 2001 GMC Sierra 4wd with 6-1/2 foot box.
The difference between the rugged look, # 751524 and OEM look fender flares, # 781524, that will fit your truck is that the rugged look flares are much wider and extend up on the fender farther than the OEM look fender flares.
view full answer...
- What Size Drill Bit is Needed to Install Bully Chrome Plated Billet Fuel Door on a 2009 GMC Sierra
- According to Pilot, when installing the Bully Chrome Plated Billet Fuel Door with Lock, # GD-103CK, you will need a 5mm drill bit. When drilling take care not to over-drill (drill to far).
view full answer...
- Will the Putco Chrome Towing-Mirror Overlays # P400507 Fit on a 2005 Dodge Ram 2500
- Yes, these Putco Chrome Towing-Mirror Overlays # P400507 will work on the towing mirrors of your 2005 Dodge Ram Heavy Duty truck.
I attached installation instructions for you to check out also.
view full answer...
- Does Chrome Tail Light Covers # P400863 Include Driver and Passenger Side for a 2008 Nissan Altima
- The Putco Chrome Tail Light Covers, # P400863, includes both a driver and passenger side trim piece. If you look at the second, third, and fourth pictures on the product page, it will show you what both look like. I have incldued a link to the installation details for you to view.
If you are looking for the actual clear piece that covers the entire tail light assembly, you may have to visit an auto parts store or a Nissan dealership.
view full answer...
- Installing Putco Chrome Trim Kit P405064 on a 2007 Toyota Camry
- The Putco Complete Chrome Accessory Kit that you referenced, part # P405064 is for the 2003-2006 Toyota Camry. For your 2007 model, you would need part # P405051. This kit can easily be installed by the do-it-yourselfer.
Simply clean the surfaces that the trim would attach to, and wipe down with rubbing alcohol. Remove the tape from the rear of the trim pieces to expose the adhesive, and press the trim pieces in place.
I will also provide a link to the install instructions, for you to revi
view full answer...
- Comparison of Putco Fender Kit # P97301 and Pilot Stainless Fender Kit # WF-2109
- The Putco Stainless Steel Fender Trim for Dodge Ram, part # P97301, and the Polished Stainless Steel Fender Trim Kit, part # WF-2109, share many of the same features.
They are both made of the same material, have the same polished stainless steel finish, and they both have rubber edges for a more secure, no-scratch finish.
The biggest difference between the two that I can see is that the # P97301 seems to have a rounder look to the trim pieces, while the WF-2109 seems to be a little flatte
view full answer...
- How Wide is the Underside of the Fender Trim Kit # WF-2109 for a 2006 Dodge Ram
- I spoke with my contact at Pilot and he informed me that the portion that is on the inside of the fender where it attaches to your vehicle fender ranges from 1/2 inch between the mounting flanges all the way up to 1-1/2 inches on the areas with mounting flanges on this Polished Stainless Steel Fender Trim Kit, part # WF-2109.
view full answer...
- Availability of Fender Trim that Will Fit With Hemi Badges on a 2005 Dodge Ram Quad Cab
- The Putco Stainless Steel Fender Trim, # P97302, is not intended for the Hemi model but the Putco Stainless Steel Fender Trim, # P97309, is specifically designed for Hemi models so you will not have to remove the Hemi badges from the truck. The other difference with this trim is that the front trim pieces go all the way around the well wheel instead of being a half set like # P97302.
view full answer...
- How Would a Bully Chrome Plated Billet Fuel Door # GD-103CK Install on a 2011 GMC Sierra
- First, you will need to open the gas door and remove the 2 factory torx bolts and push clip fastener that holds the gas filler bezel to the truck. Push the bezel off to the side. Save the bolts and the fastener.
Next, drill out the 2 factory gas door rivets to detach the factory gas door. Once the factory door is removed reattach the filler bezel with the torx bolts and push clip from the previous step. Remove the 2 rubber door stops (twist and pull).
Attach the billet gas door and shim pl
view full answer...
- How Many Pieces Come with Putco Chrome Door Handle Covers # P400016 for a 2007 GMC Sierra Classic
- I have included a link to the available trim kits for your 2007 GMC Sierra Classic 4-Door crew cab. We actually have numerous options available just in door handles alone. The correct Putco Chrome Door Handle Covers for your truck are included in part # P400016. The P401005 that you have referenced is for a Lincoln Aviator. In both cases, each one comes with a complete set of 4 handle covers.
view full answer...
- How Many Pieces Per Door Does the Putco Chrome Door Handle # P401005 Include
- I spoke with my contact at Putco and she informed that there is 2 pieces per door in this Putco Chrome Door Handle Covers, part # P401005. The 2 pieces are a handle piece and a surround piece. There is no back plate.
I attached installation instructions for this product below also.
view full answer...
- Availability of Stainless Steel Fender Trim for a 2009 Chevy Silverado
- Pilot does make a fender trim kit for 2007 and up Chevy Silverado 1500 trucks. Take a look at Bully Polished Stainless Steel Fender Trim, # WF-2223L. The picture we have is a typical photo but the actual trim pieces are contoured to the shape of the vehicle fender according to Pilot. I have also included a link to all of the trim options available for the 2009 Chevy Silverado.
view full answer...
- Will Pilot Fender Trim Kit # WF-2619 Cover Holes of Factory Trim Removed on 1999 Ford Expedition
- I contacted our representative at Pilot, and he informed me that the Polished Stainless Steel Fender Trim Kit, part # WF-2619, should cover up the holes from your factory trim. He gave me the height of the trim kit, so that you can measure to see where the holes are when you remove the factory trim.
Part # WF-2619 starts out narrow at the bottom at 5/8 Inches tall then gets taller. At the tallest point or in the middle of the trim, which would be the top of the wheel well, it measures 1-5/8
view full answer...
- What License Plate Brackets Are Available For 2007 Hummer H2
- The Putco Chrome Rear License-Plate Frame for Hummer H2 # P403416 is a license plate frame that is designed to fit around the handle of the lift gate on a 2006 to 2009 Hummer H2. It installs by using pre-applied 3M tape. It does not come with a light, but I do have the Optronics License-Plate Light, Adhesive Mount # LP56CB that also installs with 3M tape.
The other brackets I have would be the Optronics License-Plate Light w/ Mounting Bracket # LP55CB or the Peterson License Plate Light with
view full answer...
- Will TrailMax Dash Overlay Kit, # B8170131 Fit a 2010 Jeep Wrangler
- Yes, according to Bestop, the TrailMax Dash Overlay Kit, # B8170131, will fit 2010 Jeep Wrangler and Jeep Wrangler Unlimited models with manual windows. I have included a link to the installation details below. This kit is laser cut for exact fit and is installed over existing parts so you do not have to remove any factory parts. Since you had a similar kit in your 2008, you know just how good it will look when installed.
view full answer...
- Will Putco Stainless Steel Fender Trim Fit 2009 GMC Sierra
- I contacted our representative at Putco, and he informed me that Putco Stainless Steel Fender Trim, part # P97290, will fit your 2009 GMC Sierra if it is the 1500 model. If you have an HD model you will need part # P97291, for your 2009 GMC Sierra.
view full answer...
- Is There An Opening For Courtesy Lights on the Putco Chrome Mirror Overlays for Chevy/GMC
- The Putco Chrome Mirror Overlays for Chevy/GMC, part # P400131, has openings at the bottom for ground illumination lights. If you are referring to the light at the bottom of the mirror as the courtesy light, then yes, part # P400131, has provision for the courtesy light.
The factory mirror cover must be present for part # P400131, to work on your vehicle as it is designed to go directly over the factory cover. No, part # P400131 will not work if the original mirror cover is missing.
view full answer...
- Are Splash Guards Removed On 2004 Nissan Murano For Westin Running Boards, # 28-0470, To Fit
- I called the supplier (Westin) and they said that the splash guards in front of the rear wheels and behind the front wheels have to be removed permanently from your 2004 Nissan Murano to be able to use the Westin Tube Steps - Running Boards, # 28-0470.
view full answer...
- How Wide is the Visible Portion of the Polished Stainless Steel Fender Trim Kit # WF-2107
- At the center of the wheel well the Polished Stainless Steel Fender Trim Kit, 1/2 Wheel, item # WF-2107, extends 1-3/4 inches above the wheel well. There is a 1/8 inch rubber trim around the fender trim to protect the vehicle finish.
view full answer...
- Complete Chrome Kit for a 2010 Chevy Silverado 2500 HD Crew Cab
- If your 2010 Chevy Silverado 2500 HD is a Crew Cab you can use Putco Chrome Accessories Kit for Chevy/GMC without Tailgate Keyhole, # P405082. You can also use Putco Complete Chrome Accessories Kit for Chevy Silverado without Tailgate Keyhole, # P405401.
If you want a cut out for the tailgate key hole, use # P405081 or # P405402 for the Crew Cab model.
view full answer...
- What Are The Dimensions of Pilot Dual Fin AMG Style Fender Air Vent , # TT-004,
- I checked with our supplier (Pilot) on the dimensions for the Pilot Dual Fin AMG Style Fender Novelty Air Vent, # TT-004, and the height is 4 inches and the length is 10-1/4 inches end to end. This item gives the look of an air vent, but it is a non-functional air vent.
view full answer...
- Does Putco Body Side Molding Fit a Chrysler 300 Without Factory Molding
- You do not need the OEM factory molding on the car. The Putco Aluminum Body Side Molding for Chrysler 300/300C, # P96666, is made to attach to your vehicle where the factory molding would be located. It comes with pre-applied 3M tape, so you can just peel and stick. I have included a link to the installation instructions for you. I have also included a link to all of the trim options we have for a 2007 Chrysler 300.
view full answer...
- Are Fender Flares Available For 2002 Ford Escape XLS
- At this time fender flares for a 2002 Ford Escape XLS are not available from our supplier.
view full answer...
- Availability of Harley Davidson Door Handle Trim for 2008 Chevrolet Silverado Crew Cab
- Yes we do have the Putco Harley Davidson Chrome Door Handle Covers, part # P406003, for the 2008 Chevrolet Silverado Crew Cab. This part number is the four piece set for the Crew Cab.
I am including the installation instructions on the door handle covers.
view full answer...
- Which EGR Fender Flares Fit a 1994 Ford Ranger
- Part # 754414 is for a Toyota pickup and not the proper part for a 1994 Ford Ranger.
The proper EGR Fender Flare for a 1994 Ford Ranger is part # 753044. I have added a link to it below.
view full answer...
- Is Putco Chrome Tailgate Accent, Part # P403488 a Fit for 2006 Escalade EXT
- The Putco Chrome Tailgate Accent, part P403488 is not a fit for the 2006 Escalade EXT, it will fit the 2007-2010 models only.
view full answer...
- Pilot Automotive Fender Flares for a 2000 Dodge Ram 2500 Extended Cab
- The Pilot Automotive Fender Flares, # WF-2107L, do fit a 2000 Dodge Ram. We also carry the half wheel set, # WF-2107. I have included a link to all of the trim pieces we carry for a 2000 Dodge Ram for you.
view full answer...
- Is there a Stainless Steel Fender Trim Kit Available for a 2008 Dodge Ram 2500/3500 Dually
- We do have a stainless fender trim kit for a 2008 Dodge Ram Dually. The part # is P97303.
view full answer...
- Do You Carry Stainless Steel Fender Trim Kits for a 2009 Chevrolet Silverado
- Yes, we do have stainless steel fender trim for a 2009 Chevy Siverado. The trim kit is part # P97289. We do not have black side molding, only the chrome like part # P403689.
view full answer...
- Quantity of Bully Fender Vents TT-008
- I spoke with my contact at the manufacturer and there is one in the package for part # TT-008.
view full answer...
- Rear Fender Flares for 1979 Jeep Cherokee Chief
- I am sorry, we do not carry fender flares for your vehicle. We have not heard of anyone that manufactures them.
view full answer...
- What Towing Mirrors are Available for a 2006 Chevy Trailblazer
- We do not offer a custom fit slip on towing mirror for the Chevy Trailblazer. We do have quite a few universal fit towing mirrors that may work for you. I have included a link to them.
Two of our best sellers are the K-Source Universal Clip-On mirror, part # KS3891and the Cipa Deluxe Door Mount Mirror, part # 11650.
view full answer...
- Polished Stainless Steel Tailgate Handle Cover Finish
- The Polished Stainless Steel Tailgate Handle Cover, part # SDT-202, will have a mirror-like finish, like a chrome finish would. This is a great product, as you get the durability of stainless steel that never rusts, but the chrome look. You are correct, the picture does not do the part justice.
view full answer...
- Dual Fin Chrome Plated ABS Fender Novelty Air Vent Dimensions
- The Dual Fin Chrome Plated ABS Fender Novelty Air Vent, item # TT-003, is 3-1/4 inches tall and 8-1/2 inches long overall. The tips are about 1 inch long on each side, so the mesh vent is about 6-1/4 inches long. The vent does have a perforated look and feel, and the mesh does not touch the backing. It is a functioning vent.
view full answer...
- Polished Stainless Steel Fender Trim Kit Measurements and Shipping Fee
- The Polished Stainless Steel Fender Trim Kit, part # WF2220L, is 3/4 inch on the ends and the widest point measures 2 inches. They do cover the whole fender well. If you would like to know your shipping costs right away you can call 1-800-298-8924 or you can calculate the charges yourself on our web site. The instructions on how to do this are as follows. To calculate shipping charges, add the items you are interested in to your cart, click the shopping cart button at the top of the page, enter
view full answer...
