Expert Answers about Tonneau Covers

Will the Craftec Hatch-Style Tonneau Cover Fit a 2006 Ford F-150 With an 8-Foot Bed
Yes, the Craftec Hatch-Style Tonneau Cover - Low Profile # 151234 is considered a fit for your 2006 Ford F-150 with an 8 foot bed. Please be aware that this cover clamps directly to the bed-rails of your truck, therefore this tonneau cover can be used with an in bed liner. However if your truck is outfitted with a bed liner that extends over the bed-rails, the liner will have to be cut in order to properly install this tonneau cover.
view full answer...

TruXedo Roll Up Soft Tonneau Cover for a 2009 Dodge Ram 1500 Short Bed
The TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX244101 fits 2002 Dodge Ram Pickup 2500 and 3500 Series, 6 Foot Bed and 1994 - 2001 Dodge Ram Pickup 6 Foot Bed. But it does not fit a 2009 1500. For a 2009 Dodge Ram 1500 short bed (6 foot bed) you can use # TX246901. For a 5-1/2 foot bed with the Ram Box feature use # TX544955. For a 5-1/2 foot bed without the Ram Box use # TX245901.
view full answer...

Will the Access Vanish Soft Tonneau Cover fit a 2005 Dodge Ram 1500 SLT Daytona with a Spoiler Wing
Truxedo states that their Lo Pro QT Soft Roll-Up Tonneau Cover # TX546601 should work as long as the rear wing on your truck does not spill over into the bed rail on the inside of the bed. The mounting brackets for this tonneau cover are designed to sit in between the bed rails of your 2005 Dodge Ram Daytona package with a wing and should not interfere with the OEM spoiler. I have included a photo showing the mounting brackets location for your reference. According to Access they do not off
view full answer...

Compatibility of Truxedo Edge # TX871101 Tonneau Cover with 2011 Chevy Silverado with Bed Liner
The Truxedo Edge Tonneau Cover you mentioned, part # TX871101 is compatible with with a 2011 Silverado with the 6-1/2 foot bed. Per Truxedo, it can be installed directly over a spray-in bed liner. If you have a rigid plastic drop-in liner, you will have to notch it or cut some holes so that the 3 clamps per side that attach the tonneau rails to the bed side rails can connect directly to the inside lip under the top of the bed rail.
view full answer...

Will Truxedo Deuce Tonneau Mate Toolbox and Cover Fit a 2012 F-150 With TracRac G2 Installed Already
I have a solution so you will be able to incorporate both the tonneau cover and toolbox without interfering with your TracRac G2 you currently have installed. According to my contact at TracRac, the system you have in place was designed to install into the truck the way it is and will not work if you flip the rails. Truxedo does have an answer for your 2012 F-150 truck. The TruXedo TonneauMate Truck Bed ToolBox # TX1117416-457 will work in your truck - it comes with a special clamp kit sp
view full answer...

Bestop EZ Fold Folding Tonneau Cover for a 2001 Dodge Dakota Quad Cab Short Bed
We do have a Bestop EZ Fold Folding tonneau cover for your 2001 Dodge Dakota Quad Cab Short Bed, but the tonneau cover that you referenced will only fit the models with the 6-1/2 ft bed. For your truck, you will want to take a look at the EZ Fold Tonneau Cover, # B1606201. This cover was designed to fit the 2001 Dodge Dakota with the 5 ft bed. This tonneau cover is very easy to install and will work great with your truck. I have attached the installation instructions for you to check out
view full answer...

Will Craftec Tonneau Cover, Part #554735, Fit 2011 Toyota Tacoma with Factory Tie-Down System
The Craftec Tonneau Cover for 2011 Toyota Tacoma, part #554735, will fit the 5-foot bed either with or without the factory-installed tie-downs. My contact at Craftec confirms that special custom clamps are supplied (at no additional charge) for this products application to your vehicle. This Craftec hatch-style tonneau cover installs without drilling and can be operated by one person. It is fully compatible with under-the-rail bed liners and can be used with over-the-rail liners with some min
view full answer...

Size of Shipping Box for Access Roll-UpTonneau Cover, Part # 834532006823, for 2012 Nissan Frontier
The Access Roll-Up Tonneau Cover for the 2012 Nissan Frontier with Crew Cab and 5-foot bed, part # 834532006823, is packaged by the manufacturer in a carton that measures 8-1/2 x 5 x 79-1/2 inches. A product of this size and shape is shipped as is, in the manufacturer packaging, unless additional packing were to be specifically requested by the customer. Shipping weight of this item is approximately 34 pounds.
view full answer...

Differences Between the Truxedo Low Pro QT Tonneau Cover and Edge Tonneau Cover
I spoke with my contact at Truxedo and she informed me that TruXedo Edge Soft, Roll-Up Tonneau Cover # TX884101 that you referenced is compatible with your 2013 Nissan Frontier crew cab with a 6 foot bed, factory rail caps and factory utili-track. The only issue you will have is with the sliding bed extender. She said that will not work with the # TX884101 and it will need to be removed for it to work. There are several differences between the # TX884101 and the TruXedo Lo Pro QT Soft Roll-up
view full answer...

Fit of Truxedo # TX284101 Tonneau Cover with OEM Bed Caps and Utili-Trac on 2013 Nissan Frontier
The Truxedo TruXport Tonneau Cover you referenced, part # TX284101 is compatible with the 2013 Frontier Crew Cab with 6 foot box. It will work on models equipped with the factory installed bed caps and the Utili-Trac system. I have confirmed this with the engineering department at Truxedo. To see installation instructions, click the provided link.
view full answer...

Tonneau Covers for a 1997 Ford F-150 XLT Stepside
We have several tonneau covers that will fit the 1997 Ford F-150 with a stepside bed. I have included a link to them for you. If you like the Access Roll-up cover then you can use # 834532000951. To help seal up the area around the tailgate, I recommend the TrailSeal, # 834532001583, for the Access tonneau cover.
view full answer...

Are the Windows of the Bestop Supertop Truck Bed Cover Tinted
The Bestop Supertop Bed Cover # B76303 that you referenced comes with windows that are tinted to 31 percent visibility. It sounds like this bed cover is exactly what you are looking for.
view full answer...

Craftec Hatch-Style Tonneau Cover Recommendation for a 2001 Ford Ranger with Step Side Bed
You are correct, the Craftec Hatch-Style Tonneau Cover # 153923 that you referenced would be the correct tonneau cover for your 2001 Ford Ranger with a step side, and yes, you will need to trim the rail covers. I attached installation instructions for this product for you to check out also.
view full answer...

Installing the TruXedo TruXport Tonneau Cover on a 2013 Ford F-150 With Factory Bed Liner
Yes, the TruXedo TruXport Soft, Roll-Up Tonneau cover, # TX297601, will install on your new 2013 Ford F-150 with the factory installed bed liner, but you will need to cut a hole in the bed liner for each clamp. This is the only part of the installation where the bed liner will interfere. I do not recommend cutting the holes until you have received the tonneau cover and can do a test fit to find the best locations for the clamps. You will want to ensure that the center clamps are not placed d
view full answer...

Lockable Tonneau Cover Recommendation for a 1998 Toyota Tacoma with a 6 foot bed
Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you got a locking tailgate handle like the Pop and Lock Custom Tailgate Lock # PAL5100 as well as the # 834532000432 you would be able to lock the tailgate and prevent access to the truck bed of your vehicle.
view full answer...

Will Access Tonneau Cover # 834532007745 Fit On 1993 Chevrolet 1500 C/K Extended Cab With Stepsides
After consulting with Access, I have found that the Access Vanish Tonneau Cover # 834532007745 is a compatible fit for your 1993 Chevrolet 1500 Extended Cap Pickup with Stepsides. This cover will peel off the Velcro seal on the sides of your truck bed in minimal time, allowing you to store the rolled-up cover behind the cab using flexible straps and hooks.This cover also allows you to use your tailgate even when the tonneau is closed, leaves stake pockets free for use, and comes with a limit
view full answer...

Bestop Supertop Collapsible Bed Cover for a 2013 GMC Sierra Extended Cab Short Bed
All of the Bestop Supertop Collapsible Bed Cover look the same because they are the same item, but have different item numbers based on the model and series of your truck and the length of your truck bed. If your 2013 GMC Sierra Ext Cab Short Bed is the 6-1/2 ft bed, then you will want the Bestop Supertop, # B76303. If your truck has the 5-1/2 ft bed, then you will want part # B76310. You should also note, these tops will not work with the factory cargo management system. The cargo manag
view full answer...

Will the Bestop Folding Tonneau Cover Fit a 2002 Ford Ranger with a Bed Liner
The Bestop tonneau cover # B1612501 for the 2002 Ford Ranger will work with most bed liners. The cover clamps on so in the worst case scenario if you cannot get it to fit with your bed liner you would need to trim the bed liner in the areas where the clamps will go. I have linked instructions for you to view. Spray-in bed liners will be fine. This cover fits stepside models only. If you do not have a stepside bed I have linked the bed liner main page for your truck. Just click on the correct
view full answer...

Tonneau Cover for a 2012 Dodge Ram 2500 with Ram Box Feature
The Truxedo tonneau cover # TX547955 was specifically designed to fit the unique bed of the 2012 Dodge Ram with the Ram Box feature so it will work well with your truck. You should not have any problem opening the Ram Box lids with the cover in place. I have included a link to the installation details for you.
view full answer...

Recommended Tonneau Cover for 2012 Dodge Ram 1500 Short Bed
For your 2012 Dodge Ram 1500 Short Bed truck, I recommend the Truxedo Tonneau Cover # TX547901. Featuring automatic tension control, it rolls up in seconds to store conveniently behind your cab and can be installed in approximately 20 minutes with only a socket and a ratchet. Your chrome bed rails will not be affected as there is plenty of room to install this tonneau and maintain the clearance from your rails. I have included instructions to the proper installation of this product. You may a
view full answer...

Tonneau Cover for 2000 Chevy Silverado with Toolbox and Ladder Racks
For your 2000 Silverado with an 8 foot bed, you would need the Access Toolbox Edition, part # 834532000807. According to Access Cover, the cover is compatible with most 20 or 21 inch wide toolboxes. The cover mounts to the inside edge of the bed side rails, as shown in the diagram I have edited for you. The way your ladder rack attaches to the truck bed will dictate if the tonneau cover will fit. If the ladder racks only use the stake pockets or the top of the bed rail to attach, then the Acc
view full answer...

Will Bestop Supertop Bed Cover # B76315 Fit 2007 Chevrolet Silverado Classic 3500 Dually
For your 2007 Chevrolet Silverado Classic 3500 Dually with 8 foot bed, the Bestop Supertop for Truck Collapsible Bed Cover # B76315 is a compatible product. I have added a link providing instructions for proper installation of the item. I also recommend the Access G2 Galvanized Truck Bed Storage Pockets # A60070 to keep items tucked between the truck bed's wheel wells and tailgate as well as the Easy Retriever Telescoping Pole with Hook # A50710 that allows you to easily reach items that have
view full answer...

Will Aftermarket Bed Rail Caps Interfere with TruXedo Tonneau Cover on 2012 GMC Sierra
According to our friends at Truxedo, aftermarket bed rail caps should not affect the installation of the Truxedo Deuce Hinged Roll-Up tonneau cover. Since the rails for the cover mount with clamps from underneath the top of the bed rail, you should be able to leave your existing caps in place.
view full answer...

How Does the Craftec Hatch-Style Tonneau Cover Install on a 2011 GMC Sierra
The Craftec Hatch-Style Tonneau Cover # 251138 that you referenced will basically sit on top of the rails of the bed of your 2011 GMC Sierra. Check out the installation instructions for this product that I attached. Basically there is a hinge at the front of the truck bed that the cover will pivot on and there are gas shocks that attach to the bed rails of your truck. This is a quality tonneau cover at an economical price, I like covers like this because it does not take much time to raise
view full answer...

Tonneau Cover for a 2008 Nissan Frontier with 5 Foot Bed and Utili-Track Cargo Management System
For a 5 foot bed and a utili-track system on your 2008 Nissan Frontier, you could use # 834532006816 or the cover you referenced, # 834532006830. These covers come with a clamp-on installation kit for models with the utili-track system and if you have the Nissan sliding bed extender, you would need to add adapter # 834532006946. This adapter allows the slide out bed extender to work with the cover.
view full answer...

Bestop Supertop for a 1995 to 2004 Toyota Tacoma Short Bed
There is a Bestop Supertop for the first generation Toyota Tacoma (1995-1/2 to 2004). Cover # B76306 fits the 1995 to 2004 Toyota Tacoma, 6 foot bed, excluding stepside models. I have included a link to the installation instructions for you to view. There is no cover option if the truck has a 5 foot bed. The cover you referenced is designed specifically to fit a 2005 to 2012 Tacoma and modifying it to make it fit would lead to fit issues.
view full answer...

Access Tonneau Cover for 2012 Nissan Titan Crew Cab 5-1/2 Foot Bed with Utili-Trac Bed Rail System
The Nissan Titan Crew Cab Short Bed has either a 65-1/2 or a 67 inch long bed. You would need to choose a tonneau that is compatible with the Utili-Trac cargo rail system. For the 65-1/2 inch bed, the Access Lorado, part # 834532006519 is a good choice that is compatible with the Utili-trac bed cargo system. This cover will fit beds equipped with the sliding bed extender if the adapter, part # 834532006021 is used. For the 67 inch bed, the Access Limited Edition Tonneau Cover, part # 83453
view full answer...

Installation Recommendation for a TruXedo Tonneau Cover on a 1995 Chevrolet S-10 with Bed Liner
The clamps on the TruXedo TruXport Tonneau Cover, # TX243101, will need access under the top lip of the bed rails. If your bed liner covers the top of your bed rails, then you could remove your bed liner or make a few cuts as you mentioned. If this were my truck, I would just make a few cuts in the bed liner. You only need to make six cuts that are large enough to feed the bottom of the clamp under the lip of the truck bed side rail. This would allow you to keep the bed liner in your truck a
view full answer...

Fit of Craftec Hatch-Style Tonneau Cover # 351232 on 2005 Dodge Ram 1500 Long Bed
The Craftec Hatch-Style Tonneau Cover you mentioned, part # 351232 will fit your 2005 Dodge Ram 1500 Series truck with the 8 foot long bed. For installation details, click the provided link.
view full answer...

What is the Track System on a 2012 Chevrolet Silverado
The track system for Chevrolet is called their Cargo Management System. It is a track system that can be installed as an option from the dealer. The tracks sit just below the truck bed rails on the inside of the truck bed and can support different accessories such as ladder racks and tool boxes. If you do not have any type of rails in the bed of your truck, then you probably do not have a track system. The Access Tonneau Cover, # A22020299, that you referenced can be used with or without the
view full answer...

Which Tonneau Covers Will Fit a 2005 GMC Sierra 1500 SLT with a Stepside Bed
Bed rails are just the sides of the truck bed. Any of the tonneau covers I have linked for you will fit the 2005 GMC Sierra with stepside bed. The Vanish cover that you referenced, # 834532007813, will fit your truck.
view full answer...

Can a Tonneau Cover be Installed on a 2003 GMC Sierra Short Bed with Over the Rail Bed Liner
The Access Tonneau Cover, # A22020219, will not fit with an over the rail drop in bed liner. You would need to remove the portion that goes over the rail (making it and under the rail bed liner) to get a tonneau cover to fit. The best option for a 2003 GMC Sierra with a 6-1/2 foot bed is the Craftec cover, # 251929. You will just need to trim the over the rail bed liner where the unit clamps to the truck as opposed to trimming large portions of it.
view full answer...

Is the Craftec Hatch-Style Tonneau Cover # 153113 Waterproof
The Craftec Hatch-Style Tonneau Cover, part # 153113, is weatherproof, which means it will protect your cargo from rain and inclement weather, but it is not waterproof. The tonneau cover will use a foam weatherstripping on the back edge of the cover for water resistance, but it will not keep the bed of your truck completely dry. If you will be hauling items in the bed of the truck that need to stay dry, you will want to seal those items in bags that would be waterproof. Because of the way a t
view full answer...

Tonneau Cover Recommendations for a 2012 Toyota Tacoma Base Access Cab with 6-Foot Bed
The Access tonneau cover # A22050189, is designed for the 5-foot bed models on the 2012 Toyota Tacoma. For a 6 foot bed, you will need # A22050179. I have included a link to all of the tonneau covers we carry that will fit the 6 foot bed models.
view full answer...

Tonneau Cover Recommendation for a 2012 Nissan Frontier with a 5 foot bed with Utili-Track Rails
The tonneau cover that you would want that is confirmed to fit with the Utili-Track rails on your 2012 Nissan Frontier SL with a 5 ft bed would be the Lorado Roll-Up Tonneau Cover # 834532006830. If your Frontier has the sliding bed extender, an adapter kit, part # 834532006946 would be needed.
view full answer...

Fit of Bestop EZ Fold Tonneau Cover # B1612501 on 2001 Ford Ranger with Stepside Bed
I have spoken with one of my contacts at Bestop, who confirm that the EZ Fold Tonneau Cover you referenced, part # B1612501 is indeed a fit for your 2001 Ford Ranger pickup with the 6 foot Flairside (which is the Ford term for stepside) bed. To see the installation details, click the provided link.
view full answer...

Does a Bed Liner have to be Trimmed to Install an Access Tonneau Cover on a 2012 Toyota Tacoma
According to Access, with an under-the-rail drop in bed liner, installation is possible with minimal trim cutting of the bed liner at the front corner of the truck box and back by tailgate to allow the side rail to install properly. Considerable trim cutting is required with an over-the-rail drop in bed liner.
view full answer...

Will the Truxedo QT Tonneau Cover Fit a 2010 Silverado 2500 HD With Spray In Liner and Diamond Cap
I spoke with my contact at TruXedo and she said that the Lo Pro QT Soft Roll-Up Tonneau Cover, # TX571101, was designed to accommodate a reduction of 1/8 of an inch for truck bed width. This tonneau cover mounts to the inside of the bed rail so your diamond plated cap should not affect the installation of the cover. However, if the diamond plated rail cap hangs over the inner edge of the rail, it could interfere when rolling up or securing the tonneau cover. I would recommend using the T
view full answer...

Which Access Vanish Tonneau Cover for 2011 Silverado With Spray-In Bed Liner
The 2011 Silverado was available in three different bed lengths, 5-1/2, 6-1/2 and 8 feet. You would want to choose the cover that is compatible with your bed length. If you liked the Access Vanish, the part # for the 5-1/2 foot bed is 834532007899. The # 834532007875 you mentioned is for the 6.6 foot bed, and for the 8 foot bed, you would need part # 834532007882. All of the Access Vanish covers are compatible with a Chevy Silverado Crew Cab, with or without the cargo trac system. They are
view full answer...

How Vinyl Cover of Craftec Tonneau # 654517 Attach to Alumimum Framework
I spoke with my contact at Craftec, who tells me that the weather strip is sewn into the vinyl cover on a 2 inch wide plastic strip. The strip wraps around the aluminum frame and tucks into the frame, as shown in the diagram I provided.
view full answer...

Truxedo Lo Pro QT Tonneau Cover Compared to the Vanish Roll Up for a 2010 Nissan Frontier
The biggest advantage the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover # TX592301 has over the Vanish Roll-Up Tonneau Cover # 834532007950 is that it automatically keeps the correct amount of tension in the cover using spring loaded tensioners. The # 834532007950 requires manual adjustments that would not be too difficult or time consuming but it would be one more thing to keep track of on your 2010 Nissan Frontier. Other than that the two will function and store very similarly. I attached
view full answer...

Installation and Seal Protection of a TruXedo TruXport Tonneau Cover for a 2012 Chevy Silverado
The clamps that come with the TruXedo TruXport cover, # TX271101, are designed to fit different bed rails so on some trucks they will stick out further than on others. The pictures you see on the product page are representative photos and do not necessarily represent exactly what they will look like when attached to your truck. These clamps are the only ones that will work with the cover. The Access TrailSeal system, # 834532001453, is compatible with your truck and the TruXedo cover. For add
view full answer...

Will the TruXedo Lo Pro QT Tonneau Cover Fit a 2011 Dodge Ram with a Duraliner Bed Liner
TruXedo indicates that the Lo Pro QT covers, like # TX546955, are compatible with bed liners such as the one you have described on your 2011 Dodge Ram 1500. The rails that the cover sits on attach to the side rails of the truck with clamps but not at the front of the bed behind the cab so the bed liner will not interfere there. I have included links to the installation details and to the other covers that fit the 2011 Dodge Ram.
view full answer...

How To Determine If 2010 Ford F-150 Has the Ford Factory Trac System In the Truck Bed
The Trac System on your 2010 Ford F-150 is a tie-down system for cargo in your truck bed. The Trac System is offered in the F-150 with a 6-1/2 foot truck bed. It uses a dual C-channel rail that is mounted on the inner/vertical wall of the bed side rails. These channels are designed to accept accessories for holding down cargo. I am including a picture that will show where the Ford Trac system is located in your truck bed. The Truxedo Lo Pro QT Tonneau Cover, part # TX567955, you have referen
view full answer...

Why The Craftec Tonneau Cover will not Fit Splash Model Ford Rangers
The Splash model for the 1996 Ford Ranger is a trim package. The reason you could not use a Craftec Hatch-Style Tonneau Cover # 153113 on a Splash Ranger is because they all have step-side beds and the # 153113 is not compatible with 1996 Ford Rangers with stepside beds. As long as you have a 6-foot bed that is non-stepside this tonneau cover would work for you. I attached installation instructions for this product for you to check out.
view full answer...

Availability of Bestop Supertop Collapsible Bed Cover for 2002 Silverado Long Bed
We do indeed have a Supertop Collapsible Bed Cover for your 2002 Silverado Long Bed. The part # is B76315. Bestop has confirmed this as a fit for your truck. For install instructions, click on the provided link.
view full answer...

Truxedo Deuce Hinged Roll-Up Tonneau Cover Recommendation for a 2008 GMC Sierra
This TruXedo Deuce Hinged Roll-up Tonneau Cover # TX771201 that you referenced should work well on your 2008 GMC Sierra with a cargo system as long as it has a 6-1/2 foot bed. The Trac system is the cargo system that you have on your vehicle. It is just another name for it. I attached a picture that shows a GM truck with a Trac system for you to check out. I also attached installation instructions for this product for you to check out also. This cover can handle heavy snowfall, however
view full answer...

Will the Truxedo Deuce Tonneau cover Fit on a 2011 Nissan Frontier with Utili-Track and Bedliner
I spoke with our contact at Truxedo and the Truxedo Deuce tonneau cover, # TX784101, will work on your 2011 Nissan Frontier with Utilt-Track system and an over the rail bed liner as long as it has a 6 foot bed. If your truck has a 5 foot bed you will need the TruXedo Deuce tonneau cover, # TX792301.
view full answer...

Will The Tonneau Cover for TracRac G2 Fit My 2011 Dodge Ram Extra Short Bed 5 ft 7
We do have tonneau covers available for your 2011 Dodge Ram w/ 5 ft 7 inch bed, but the item you selected, Roll-Up Tonneau Cover for TracRac G2 will not fit. For a tonneau cover, I would recommend the Truxedo Tonneau Cover # TX545955, which will fit the 2011 Dodge Ram w/ 5 foot 7 inch bed. The # TX545955 Cover will also fit Ram that are equipped with or without the integrated Ram Box. I have linked instructions for the Truxedo Tonneau Cover # TX545955.
view full answer...

Will an Access Tonneau Cover Fit a 2007 Chevy Silverado New Body with a Spray-in Bed Liner
Access states that you can use the Vanish Roll-Up Tonneau Cover, # 834532007875, with a spray-in, over the rail bed liner. If it were a drop in over the rail bed liner you would have to trim the bed liner to install the cover. Spray-in bed liners will not have to be trimmed. I have included a link to all of the tonneau covers for the 2007 Chevy Silverado New Body. Just select the bed type and length to see the available options.
view full answer...

How To Keep the TruXedo TruXport Soft, Tonneau Cover Tight on a Truck Bed
I spoke with my contact at Truxedo and she informed me that in order to keep the middle of the cover from sagging you will want to pull the cover tight from side to side, using the hook and loop to hold the additional tension. She also said that it is a good idea to tighten the cover every time you lift it up and then put it back on. Basically, you will lift up on the cover separating the hook and loop attachment and then pull it tight before you set it back down onto the side rail. I atta
view full answer...

Can a LiteRider Roll-Up Tonneau Cover by Access be Used on a 2010 Toyota Tacoma with a Bed Liner
I checked with Access and as long as your plastic bed liner does not come up and over the side rails you could use this LiteRider Roll-Up Tonneau Cover by Access # 834532006724 on your 2010 Toyota Tacoma. If the bed liner does come up and over the side rails you will need to trim back that portion.
view full answer...

Will the Master Lock Truck Bed Security U-Lock Fit a 2007 Nissan Frontier Utili-Track System
I went out to the warehouse and pulled a Master Lock Truck Bed Security U-Lock, # 8287DAT. You will have to measure your Utili-Track system and compare that to the mounting plate that would fit inside the Utili-Track. The plate is 2 inches long by 1-3/8 inches wide, by 1/4 inches thick. If that size plate will slide into your Utili-Track system, then it will work.
view full answer...

Comparing Access and Truxedo Tonneau Covers for a 2011 Ford Ranger with a 6 Foot Bed
For me, between the Access Cover, # A22010109 and the Truxedo, # TX250101, I would go with the Access cover because it is as low profile design. It sits only 1/2 inch above the bed rails. The Truxedo cover is 1-1/2 inches above the rails. Given that the prices are about the same, what would sell me on the Access cover is that low profile design. In terms of keeping out water, the Access cover comes with a weather seal that runs along the truck bed sides and you can add a tailgate gasket, # 8
view full answer...

Is the Bestop Supertop for Truck Collapsible Bed Cover Waterproof
The Bestop Supertop, # B76308, is weather resistant but not waterproof. For an item to be waterproof it must be able to keep water sealed out when submersed under water. The material of the Supertop will resist rain, but there is a chance that water can get in from the seams or zippers of the cover in a prolonged rainy event or driving rain. If the cover is stretched too much from rain water puddling up, water could potentially leak in through the fabric. The representative at Bestop informed
view full answer...

Recommendation for TruXedo Tonneau Cover on a 2004 Dodge Dakota Quad Cab
The TruXedo line of tonneau covers for your 2004 Dodge Dakota Quad Cab is the TruXedo Deuce, part # TX790101, the Lo Pro QT, part # TX590101, the Edge, part # TX890101, and the TruXport, part # TX 290101. The TruXport that you have referenced is the most economical of all four of the covers. It has a pre-set tension control so you will not be able to adjust the tension of the tonneau cover on your truck. The tension control is what keeps the cover taut on your truck bed. It has a 5-year warra
view full answer...

What Tonneau Covers Fit a 1999 GMC Sierra Stepside
Without knowing the make and model of the cover that the first owner had on it, I cannot say whether or not an Access cover or another cover will fit with any degree of certainty. It may have been removed because there was some sort of problem with it, so it may be a good idea to go with a new one and get all new parts. The good news is that we do have some covers that specifically fit the stepside model of the 1999 GMC Sierra in different price ranges. On the lower end of the cost spect
view full answer...

Which Tonneau Covers Fit a 2011 Nissan Frontier King Cab with Utili-Trac System
There are a few tonneau covers that will fit your 2011 Nissan Frontier King Cab with the Utili-Trac system. First, we have the Access Roll-Up Tonneau Cover, # 834532006854. This is a roll up type of cover and it is the most popular tonneau for your vehicle. If you also have the Nissan sliding bed extender, you would also need the Sliding Bed Extender Adapter Kit, # 834532006946, so the tonneau will fit. The next step down is Vanish Roll-Up Tonneau Cover, # 834532007950. It will work with t
view full answer...

Availability of Access Tonneau Covers for 2011 Nissan Frontier
There are a few different styles of Access tonneau covers that will fit your 2011 Nissan Frontier. The Access tonneau covers are listed for a Nissan Frontier Crew Cab with a 5 foot bed and a Nissan Frontier King Cab with a 6 foot bed. I am including a link to a product page that will show the Access tonneau covers that will fit your 2011 Nissan Frontier if it is a Crew Cab with a 5 foot bed. Also, a link to a product page that will list the Access tonneau covers that will fit a 2011 Nissan Fr
view full answer...

How Much Weather Protection Would the Bestop Collapsible Bed Cover Part B76308 Provide
The Bestop Supertop Collapsible Bed Cover, part # B76308 would do a pretty good job of keeping the bed of your truck dry. The side window zippers and the point where the rear of the Supertop would meet the tailgate would be the two points were the Supertop might be vulnerable to water seepage. The Supertop is not what I would be called theft-proof, but in order to remove it quickly, a potential thief would need to be familiar with how it attaches to the vehicle. To view the installation p
view full answer...

Can a Bestop Supertop for Trucks Fit a 1995 Toyota Tacoma with a Bed Liner and Will it Leak
According to my contact at Bestop, you can install the Supertop for Trucks, # B76306, if your 1995 Toyota Tacoma has a bed liner. If it is a spray in bed liner, you would just follow the instructions like normal. I have included a link to the instructions for you to view. If it is a slide in type of bed liner, you may need to cut and trim the bed liner in order to get a secure connection for the clamps. According to Bestop, the Supertop is weather resistant but not waterproof. For somethi
view full answer...

Replacement Tension Control for Truxedo Lo Pro Covers Recommendation
Yes, you will need Replacement Tension Control for Truxedo Lo Pro Covers part # TX1702992.
view full answer...

Tonneau Cover Recommendation for a 2006 Chevy Silverado with 6-1/2 Foot Bed
Access makes a good tonneau cover. I recommend the Vanish model, # 834532007806. It is made of a material that will not expand in the heat or shrink in the cold. It comes with vehicle specific clamps that make for a quick and easy installation. This cover is amongst the lowest profile at only 1/2 inch above the bed rails. My second choice would be the Truxedo Lo Pro QT, # TX581101. It is made of industrial-strength, leather-grain vinyl fabric that will not shrink in cold weather. It sits abou
view full answer...

Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2006 Toyota Tacoma With Factory Rails
Yes, this Access Roll-Up Tonneau Cover # 834532006755 will work on your 2006 Toyota Tacoma Double Cab with a short bed and allow you to use your factory side rails and tie downs. Access says it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system.
view full answer...

Recommended Tonneau Cover for a 2011 Toyota Tacoma Double Cab Long Bed with Deckrail System
I spoke with my contact at Access about Tonneau Covers for your 2011 Toyota Tacoma with the deckrail cargo management system. She stated that they do have 2 options that are compatible with the system, but to avoid low profile covers because they can cause fit issues. The covers that would work for you are the Access Tonneau, # 834532006700, and the LiteRider Tonneau, # 834532006724. I have included links to the instructions for the Access model for you to view.
view full answer...

Will a Truxedo Lo Pro QT Tonneau Cover Fit on a 2005 Dodge Ram 1500 Daytona Edition With Spoiler
The correct Lo Pro QT tonneau cover for the 2005 Dodge Ram Pickup is part # TX546601, and as long as the spoiler near the tailgate on your Daytona edition does not spill over the side of the bed rail into the inside of the bed, this cover will work on your truck. The TruXedo Lo Pro QT Tonneau Cover, # TX546901, that you referred to is designed to fit the 2009 - 2011 Dodge Ram Pickup 1500 Series, 6 Foot Bed pickups and will not fit on the 2005 model Dodge Ram.
view full answer...

Will the Access or Truxedo Tonneau Covers Work with a 5th Wheel Tailgate on a 2006 Dodge Ram
With both the Access, # 834532002450, and the Truxedo, # TX848101, tonneau covers the tailgate can be raised and lowered without affecting the covers attachment, so it will work with your fifth-wheel tail gate installed, as long as the fifth-wheel tailgate does not extend above the bedsides at any point. Both of these covers have rails that clamp to the insides of the truck bed rails, and if your fifth-wheel trailer pinbox gets close to the inside of the bed rails when making tight turns, you
view full answer...

Availability of Access Vanish Roll-Up Tonneau Cover For a 2002 Ford F-250 With an 8 Foot Bed
The Access Vanish Roll-Up tonneau cover that will fit your 2002 Ford F-250 with an eight foot bed is the Access Vanish Roll-Up Tonneau Cover, part # 834532007677. The 2002 F-250 and F-350 models will have a little longer 8 foot bed than the F-150 model. The Access Vanish Roll-Up Tonneau Cover, part # 834532007622 that you have referenced will fit a 1997 to 1999 Ford F-250 Light Duty with the 8 foot bed. I am including a link to a video review on the Access tonneau cover.
view full answer...

Installing a Tonneau Cover on 2005 Dodge Ram 3500 with Drop-In Bed Liner
I spoke with one of our friends at Access, the manufacturer of the tonneau cover. He told me that the LiteRider Roll-Up Tonneau that you mentioned will work with a drop-in bed liner. In order for the clamps to attach to the underside of the bed rail, 6 one inch holes will need to be cut into the bed liner at each attachment point. The extra thickness caused by the bed liner on the inside of the truck bed side rails will not affect the fit.
view full answer...

Will the Craftec Hatch-Style Tonneau Cover Fit on a 2003 Nissan Frontier Crew Cab Long Bed
I spoke with my contact at Craftec and he said that your bed length should be within 73-3/8 inches and 73-1/2 inches inside length. I have linked a video showing how to measure for the correct length to determine if the Craftec Hatch-Style Tonneau Cover, item # 654517, will fit on your 2003 Nissan Frontier Crew Cab pickup. The truck I measured is a 6 foot bed 2004 Nissan Frontier. My contact at Craftec said that it sounds as if you measured from the outside edge to the tail gate and that 73-1/2
view full answer...

Tonneau Cover for 2011 Nissan Frontier with Utili-Track Bed System
The mounting system of the Tonneau cover you referenced is not compatible with the Utili-Trak system on your Frontier. We do offer covers that will work for you. For a 5 foot bed, the Access Lorado Roll Up Tonneau Cover, part # 834532006830 would be ideal. For a 6 foot bed, part # 834532006885 would work. If your Frontier has the sliding bed extender, an adapter kit, part # 834532006946 would be needed.
view full answer...

Will a Vanish Roll-Up Tonneau Cover # 834532007943 Work w/ a Bed Extender in a 2008 Nissan Frontier
Because the cover rails mount on the inside of the box, the bed extender must have at least 3 inches of clearance on each side of the bed when rotated to clear the rails. Or it must be able to detach from the truck, be manually rotated and re-attached. The track of this unit attaches using six sturdy aircraft grade aluminum clamps to secure the tonneau cover rails to the inside of the side rails of your truck. To roll up the cover you will release the trigger latch and begin rolling up th
view full answer...

How Could the Bestop Supertop for Truck Collapsible Bed Cover # B76309 Be Secured to a Truck Bed
There might be a way to secure this Bestop Supertop for Truck Collapsible Bed Cover, part # B76309, but there is not an actual locking feature on this product. My recommendation would be to run Master Lock 10-mm Braided Steel Cable, part # 72DPF, through the framework of # B76309 and then attach it to Master Lock Truck Bed Security U-Lock, part # 8287DAT, installed in the corners of the bed. I attached installation instructions for you to check out also.
view full answer...

Will Bestop Hard Tonneau Cover System # B42740-741 Work with a 5th Wheel Hitch on a 2010 Ford SD
The first thing you will need to do is determine the height of your bed rails on your 2010 Ford Super Duty, and then determine the height of your fifth wheel hitch. If the height of your bed rails is higher than the fifth wheel hitch then yes, you would be have a fifth wheel hitch installed into the bed of your 2010 Ford Super Duty and have the Bestop BestRail Hard Tonneau Cover System, part # B42740-741, installed and acting as a tonneau cover when not pulling a fifth wheel trailer. If yo
view full answer...

Can the Craftec Hatch-Style Tonneau Cover # 253124 Handle the Weight of Heavy Snowfall
I spoke with my contact at Craftec and she informed me that this Craftec Hatch-Style Tonneau Cover, part # 253124, does not have a weight limit on it, she also said that this tonneau could handle 8-10 inches of snow without a problem. She did say that you would want to brush the snow off as soon as possible but the weight of the snow will not damage it at all. My contact also said that as long as someone is not standing in the middle of the cover and the weight is spread out on the surface
view full answer...

Craftec Hatch-Style Tonneau Cover # 151927 Recommendation for 1999 Ford F150 Stepside 6-1/6 ft Bed
This Craftec Hatch-Style Tonneau Cover, part # 151927, is a confirmed fit for 1999 Ford F150 step side trucks with a 6-1/2 foot bed. As long as your F150 has a 6-1/2 foot bed this should work well for you. Do not let the pictures fool you on the shape of the tonneau cover, the pictures shown are of a different model truck and do not necessarily reflect how it would look on your vehicle. The # 151927 is custom made for the 1999 F150 and will fit it very well. You would not need anything el
view full answer...

How is the Bestop Tonneau Cover # B1621101 Secured to a 2007 Chevy Silverado Truck Bed
If you scroll down on the product page for the Bestop Tonneau Cover, # B1621101, you will see a picture of the clamp mechanism. I have also included a link to the installation details for you to view. Basically, there are rails that go across and underneath the cover. These rails have a channel in them from which the clamp hangs. To secure the cover to the bed, slide the clamp all the way over to the bed rails, rotate the clamp lever that pulls the cover taught, and the cover is secure. Reverse
view full answer...

Which Truxedo Lo Pro QT Tonneau Cover will fit on a 2010 Chevrolet Silverado
We have three lo pro QT covers for the 2010 Silverado without Trac System, depending on your truck bed length. The # TX570601 TruXedo Lo Pro QT Soft Roll-up Tonneau Cover - Black fits the 5-1/2 foot bed. The # TX571101 TruXedo Lo Pro QT Soft Roll-up Tonneau Cover - Black fits the 6-1/2 foot bed. The # TX571601 TruXedo Lo Pro QT Soft Roll-up Tonneau Cover - Black fits the 8 foot bed. If your 2011 Silverado has the Trac System in the bed of the truck, the following covers will work. The
view full answer...

Is The Bestop Supertop Collapsible Bed Cover # B76302 Waterproof
I contacted our representative at Bestop to inquire about the Supertop Collapsible Bed Cover, part # B76302. The representative informed me that part # B76302 is weather resistant but is not waterproof. For an item to be waterproof it must be able to keep water sealed out when submersed under water. The material of part # B76302 will resist rain, but there is a chance that water can get in from the seams or zippers of the cover. Also, if the cover is stretched too much from water puddling up,
view full answer...

Availability of Bestop Supertop Collapsible Bed Cover in White for a 2006 Ford Ranger
The Supertop for your 2006 Ranger is only offered in black. The zip-in vinyl windows are included, there used to be a mesh option that is no longer available at this point. According to the instructions from Bestop, the following tools are required for installation: Tape Measure Phillips Screwdriver 7/16 Wrench 9/16 Wrench Power Drill with 1/8 inch bit Center Punch Scissors Utility Knife
view full answer...

Will TruXedo Edge Soft, Roll-Up Tonneau Cover, # TX871101 Fit a 2010 Chevy Silverado w/Trac System
The Trak system on the 2010 Chevy Silverado is set up on the side of or on top of the truck bed rails and offer tie down points for straps. The TruXedo Edge Soft, Roll-Up Tonneau Cover, # TX871101, will actually fit a 2010 Chevy Silverado, 6-1/2 foot bed, with or without the Trac system. I have included a link to the installation details for reference.
view full answer...

Will Access Roll-Up Tonneau Cover 834532006953 Fit a 2011 Honda Ridgeline
Yes, the Access Roll-Up Tonneau Cover # 834532006953 will fit your 2011 Honda Ridgeline as long as it is a 4-door model. I would recommend that you also use a TrailSeal tailgate gasket # 834532001583 to prevent moisture and debris from getting inside the bed, and a telescoping retriever pole like part # A50710 will make it easy to unload the bed without having to crawl up into it.
view full answer...

Availability of a Tonneau Cover for a 2008 Ford F-150 Flareside/Stepside
If your 2008 Ford F-150 Flareside has a 77-7/8 inch bed (6-1/2 feet), and does not have the Trac System, you can use the Craftec Hatch-Style Tonneau Cover, # 151934. You can also use the LiteRider Roll-Up Tonneau Cover by Access, # 834532004867. Again, this cover will only fit if the truck bed is 6-1/2 feet and does not have the Trac System. Another option for a 6-1/2 foot bed, flareside, and no Trac System is the Access Roll-Up Tonneau Cover, # 834532004843 or the Access Roll-Up Tonneau Cov
view full answer...

Tonneau Cover Recommendation for a 2003 Ford F-150 Short Bed
According to what I was able to find, the 2003 Ford F-150 came in a 5-1/2 foot, 6-1/2 foot, and 8 foot bed length. I would measure the bed length to determine the exact length of the bed in order to choose the correct tonneau cover. Once you have that measurement, you can use the link below to the available covers for a 2003 Ford F-150. Just choose the bed length from the list to see the covers for that length. A nice entry level cover for the 5-1/2 foot bed is the TruXedo TruXport Soft Roll-
view full answer...

Will Bestop EZ Fold Folding Tonneau Cover, # B1603001 Fit a 2011 Ford Ranger with Spray-In Bedliner
I spoke with my contact at Bestop regarding the EZ Fold Folding Tonneau Cover, # B1603001, and she stated that it will fit your 2011 Ford Ranger with spray in bedliner as long as the bedliner does not cover the top of the bed rails. I have included a link to the installation details below.
view full answer...

Will Bestop Supertop Truck Bed Cover B76309 Fit With a Hard Shell Tonneau Cover
The # B76309 Supertop bed cover installs using long belt rails that sit on the top edge of the truck bed and are clamped down. If your tonneau cover has attachments either on the top or lower edges of the truck bed rails, it would need to be removed in order to install the Supertop cover. Both items would mount in the same area. I am including a link to the installation instructions, which should help you pinpoint where the Supertop would be installed on your vehicle.
view full answer...

Fit of Access Roll-Up Tonneau Cover Part # 834532000258 on 2000 Chevy S-10
As long as your 2000 Chevy S-10 with the 6 foot bed is a step-side model, the Access Roll-Up Tonneau Cover part # 834532000258 is the correct fit for your truck.
view full answer...

Will TruXedo Lo Pro Roll-Up Tonneau Cover TX546601 Fit a 2008 Dodge Ram 1500 With Ladder Rack
It is hard to determine whether the # TX546601 Lo Pro tonneau cover would fit your 2008 Dodge Ram 1500 without knowing how and where the ladder rack is installed. The tonneau cover installs with rails that run along the sides of the bed and are attached to the truck with three clamps. If the rack at all interferes with the side rail area where the cover would be installed, then unfortunately the two would not be compatible. If you could tell me a little more about the rack setup I would b
view full answer...

Tonneau Cover Recommendation for 1992 Ford F-150 Flare Side 6-1/2 foot Bed
I spoke with my contact at Truxedo and she informed me that the only way you will be able to get a tonneau cover for your 1992 Ford F-150 with a flair side is to have one custom made by ordering a TruXedo Lo Pro QT Tonneau Cover - Special Order to Your Dimensions, part # TXLOPRO. You will need to know the width and length measurements of your truck bed when you are ready to order.
view full answer...

Color and Quality of Craftec Hatch-Style Tonneau Cover, # 153923 for a 1998 Ford Ranger Stepside
The Craftec Hatch-Style Tonneau Cover, # 153923, will fit your 1998 Ford Ranger Stepside, Splashbox. The alternate 8740 indicates that the same part could be known as an alternate part number. This cover is black like you need. This cover is designed to protect cargo in the bed against inclement weather. It has heavy gauge aluminum framework and sturdy vinyl covering that can handle the elements ranging from intense UV rays in the summer to snow in the winter. We have numerous other tonneau c
view full answer...

Will Truxedo Lo Pro QT Soft Roll-up Tonneau Cover, # TX520601, Fit a 2011 Honda Ridgeline
According to TruXedo, the Lo Pro QT Soft Roll-up Tonneau Cover, # TX520601, will fit your 2011 Honda Ridgeline. I have included a link to the installation details below. You may also be interested in the TruXedo Universal Tailgate TruxSeal, # TX1703206. This universal fit seal will help to keep your truck bed and its contents dirt and moisture free, and it is compatible with the Lo Pro QT tonneau cover.
view full answer...

Bestop Collapsible Bed Cover for Toyota Tacoma with 5 foot Bed
Bestop does offer a Collapsible bed cover for the 2005-2010 Tacoma with a 5 foot bed. The part number is B76308. The mesh kit mentioned does replace the windows and is transparent. The mesh kit is part # B76308. I will provide links to the product descriptions for each product below. The product description for the mesh kit shows a photo of the kit, so you can see what it looks like when installed in the bed cover. I will also provide links to the installation details for each product, you
view full answer...

Which Bestop Truck Top Will Fit My 2006 Dodge Ram 1 Ton
I contacted our representative at Bestop, and she informed me that the top that will fit your 2006 Dodge Ram 1 Ton with long wheel base is the Bestop Tonneau Cover, part # B76317. The Bestop Tonneau Cover, part # B76317 will fit the 2006 Dodge Ram 1500, 2500, 3500 with 8 foot bed.
view full answer...

Recommendation for a Tonneau Cover for a 1999 Ford F-150 Flareside
Yes, I recommend the TruXedo TruXport Soft Roll-up Tonneau Cover, # TX248601. It is designed to fit Flareside models. I have included a link to the installation details below. We also carry the Craftec Hatch-Style Tonneau Cover, # 151927, that will also fit. Instead of rolling up, this cover lifts up with the assistance of gas struts. Plus it has the added benefit of being a little more economical than the other available covers.
view full answer...

Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2008 Toyota Tacoma With Factory Rails
I called the manufacturer (Access) and they said that the Access Roll-Up Tonneau Cover- Tacoma Double Cab Short Box, # 834532006755, will work together with your 2008 Toyota Tacoma factory rail system. They said it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system. I also have the Access Roll-Up Tonneau Cover, # 834532006700, which fits the 2008 Toyota Tacoma Double Cab Long Box.
view full answer...

Does Access Roll-Up Tonneau Cover Allow Full Access to Utili-track System on a 2008 Nissan Titan
I spoke with my contact at the manufacturer. He stated that the Access Roll-Up Tonneau Cover, # 834532003341, will allow you full access to the Utili-track system in your 2008 Nissan Titan. This applies to the original Access covers, but not the low-profile or Laredo models. I have included a video review of the Access Original Roll Up Tonneau covers below.
view full answer...

Which Roll-Up TruxedoTonneau Cover Will Fit a 2008 Ford F-150 with a 5-1/2 Foot Bed
I spoke with my contact at Truxedo. She stated that the TruXedo TruXport Soft Roll-up Tonneau Cover, # TX277601, will fit a 2008 Ford F-150 with a 5-1/2 foot bed. The TX297601 you currently have will not fit. There is a slight difference in the rail length between the two covers that will cause the TX297601 to not fit properly on the 2008 F-150. For the best fit, use the TX277601 for your 2008 Ford F-150, 5-1/2 foot bed. I have linked the instructions below.
view full answer...

Does the Vanish Roll-Up Tonneau Cover Block the Bed Rail Stake Pockets when Installed
When the Vanish Roll-Up Tonneau Cover, # 834532008454, is installed, you will still have access to the bed rail stake pockets. The cover goes over the open part of the bed but does not extend beyond the rails thus leaving the pockets open. I have included a close up picture showing the stake pockets relative to the cover.
view full answer...

Will Bestop Supertop for Truck Collapsible Bed Cover, # B76302, Fit On 1993 Ford Ranger
We do not make truck bed covers, we just distribute them. On a 1993 Ford Ranger we list that vehicle with a 6 foot bed or 7 foot bed. The 6 foot bed comes as either with Stepside or without Stepside. The Bestop Supertop for Truck Collapsible Bed Cover, # B76302, will fit a 1993 Ford Ranger with a 6 foot bed, excluding the Stepside. It does stay dry on the inside as long as it is installed properly. It has removable zippered windows and side panels which are heat sealed to keep the moisture ou
view full answer...

Will the Access Tonneau Cover # 834532006717 Fit on a 2010 Toyota Tacoma with Factory Bedliner
The Access Tonneau Covers for the 2010 Toyota Tacoma, 834532006717, will fit on your Tacoma with factory bed liner, if it is not an over the rail type of bed liner. Over the rail bedliners usually interfere with the seal of the Tonneau cover so we do not recommend this installation. If your bed liner ends under the bedside rail on your truck then the Tonneau will work, but you may have to trim a small area where the clamps are installed depending on how thick the bed liner is in those areas.
view full answer...

Order Tracking
Shipping Information
Contact Us
About Us

Help Videos and Articles
Search
Privacy Policy
Your Account Login