Expert Answers about Specialty Trailer Hitches

• How Far is it From the Mounting Holes to the Receiver on Curt RV Bumper Trailer Hitch 19101
• I went out to the warehouse and pulled Curt RV bumper hitch # C19101 to take the measurement you need. From the bottom of the top set of mounting holes down to the top of the receiver is 4-1/16 inches. I have included a picture showing the measurement I took, a link to the instructions, and a link to a video review.
  view full answer...


• Trailer Hitch for a 2010 Open Range 398 RLS
• For a frame mount trailer hitch for your 2010 Open Range 398 RLS, the Curt hitch # 13703 is the most likely to fit because it will fit on box frames, I-beam frames, and C-channel frames. It can be bolted on as well. I have included a link to the installation instructions and a link to a video showign a typical installation for you. Please note the capacity of this hitch is 350 pounds tongue weight. The combined weight of the generator and cargo carrier cannot exceed this 350 pound limit. Curt
  view full answer...


• Trailer Hitch to Mount On the Back of a Horse Trailer for a Cargo Carrier
• What I recommend is to use a frame mount trailer hitch, # 13703 and stabilization strap # 18050 to hold a cargo carrier on your trailer. The Curt hitch will mount to a box frame, I-beam frame, or C-channel frame. It can be bolted or welded on (welding needs to be done by a qualified professional welder). I have included a link to the installation instructions and a video showing a typical installation for you. This hitch has a tongue weight capacity of 350 pounds so the combined weight of you
  view full answer...


• Options for Carrying a 900 lb Motorcycle with a Motorcycle Carrier on a Motor Home
• The first step that you will want to take before attempting to carry your motorcycle is to contact the manufacturer of your motor home to determine tongue weight capacity of the motor home. The tongue weight capacity of your motor home must exceed the weight of your motorcycle and lift combined. Most motor homes do not have very high tongue weight or towing capacities. If you find that your motor home can support the weight of your bike plus the weight of the lift, you will need to determine
  view full answer...


• Ultra-Fab RV Bumper Hitch Recommendation For Motor Home
• While we do have a hitch that will work for your needs, the Ultra-Fab Bumper Mount Hitch # UF35-946402 you referenced is designed specifically for a 4 inch by 4 inch bumper and would not fit. The Ultra-Fab Bumper # UF35-946401 is a perfect fit as it is intended for 4 inch by 4-1/2 inch RV bumpers with a weight capacity of 200 lbs. It features a 2-inch receiver opening with a plate measuring 5-7/8 inches by 4-7/8 inches. Just a reminder, this is intended for RV-approved accessories only and
  view full answer...


• Whats the Difference Between Curt Hitch E-100 and C19101
• The difference between the Curt RV Bumper Hitch # C19101 and the Curt RV Bumper Hitch # E-100 is the application. If you have a 4 inch square bumper you would want the # E-100, if you have a 2 inch x 4 inch rectangular bumper you would want the # C19101. If you check out the pictures I attached you can see how the mounting plates are different distances apart.
  view full answer...


• Will Curt Trailer Hitch # 13703 Fit a 2007 Keystone Challenger 33DDB 5th Wheel Trailer
• Curt trailer hitch # 13703 is the most versatile RV hitch we carry. It fits trailer frames from 22 inches to 72 inches wide (measured outside of one frame rail to the outside of the outer frame rail). And it will fit box frames, C-channel frames, or I-beam frames. It can be bolted or welded on. Any welding should be performed by a qualified professional. I have included a link to the installation instructions and a link to a video showing a typical installation for you. If your trailer frame mat
  view full answer...


• Distance Between the 2 Outside Receivers on Blue Ox 3-Receiver Trailer Hitch SC9000
• From the center of one outside receiver to the center of the other outside receiver is 43 inches on 3-receiver hitch # SC9000. I made a picture illustrating this measurement for you. This hitch is specifically designed for Blue Ox carriers that require the 3 receivers like # SC2100 or # SC4200 as examples.
  view full answer...


• Can the Curt Specialty Trailer Hitch # E-3S Install on a 2004 Ford F150 without Bumper Modification
• In order to determine if the Curt Specialty Trailer Hitch # E-3S that you referenced would fit your 2004 Ford F150 with out modification you will need to check out the picture that I attached that shows the bolt pattern of the hitch and see if your bumper has mounting holes that are compatible with them. For a few other hitches that are confirmed to fit your vehicle without any bumper modifications check out the link I attached.
  view full answer...


• Will Curt Adjustable Width RV Trailer Hitch 13703 Work to Tow Two Motorcycles or an 18ft Boat
• You will need to check the weights on the motorcycle and boat trailers when they are fully loaded for travel, but as long as the loaded weights are below the 3500lb towing capacity rating for the # 13703 adjustable RV hitch, it will be able to handle them. The limiting factor may be the trailer itself, however, and not the hitch. You always have to stick to the lowest rating in your towing system, so I would recommend checking with the trailer manufacturer to determine how much of the 3500lb h
  view full answer...


• Can the Curt Bumper Mount Trailer Hitch # C19101 be used Upside Down
• You can certainly use the Curt Bumper Mount Trailer Hitch, # C19101, upside down. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. The capacities of the hitch will stay the same and you can gain more ground clearance for your cargo carrier (which can be a big deal at the back of RVs and trailers).
  view full answer...


• Trailer Hitch Options for a 2008 Fleetwood Avalon Pop-Up Camper
• Frame mounted trailer hitches are always a more secure option over bumper mounted hitches and typically have higher towing and tongue weight capacities. Before you install a trailer hitch on your 2008 Fleetwood Avalon pop-up camper, I recommend contacting Fleetwood to see if they have a recommended towing capacity for your camper. I know many trailer manufacturers do not recommend towing a trailer behind another trailer for safety reasons and some pop-up campers are not even rated for towing.
  view full answer...


• Trailer Hitch Options for Towing a Second Trailer Behind a 2006 Cherokee 305b 5th Wheel Trailer
• I was able to speak with someone at Forest River and he told me that they do not have tongue weight or towing specs for your 2006 Cherokee 305b trailer because they do not recommend towing a second trailer behind their trailers. Forest River does not recommended towing a trailer behind another trailer for safety reasons. Trailer sway is a big concern when towing two trailers at once because you have two different pivot points in your towing setup. Sharp turns and backing up can cause big iss
  view full answer...


• What are the Front to Back and Side to Side Dimensions of Curt Bumper Hitch E-3S
• On the Curt bumper hitch # E-3S the face of the receiver is approximately 2 inches out from the nearest part of the flat plate. The hitch pin hold is slightly back from that, the center being about 5/16 of an inch further back than the plate. The overall width is 14 inches. The flat part on top is 11 inches side to side. I have included a link to the installation instructions for you to view.
  view full answer...


• What is the Overall Length of the Blue Ox 3-Receiver Trailer Hitch # SC9000
• I spoke with my contact at Blue Ox about the 3-receiver hitch # SC9000. He stated that the overall length from side to side is 49 inches. He also stated that there is no minimum or maximum distance between the plates required as long as the brackets are within that 49 inches and fully on the cross tube. I have included a link to the installation instructions for you. This hitch is designed to be installed on Class A motor homes with frames that reach all the way to the rear of the vehicle.
  view full answer...


• Does Curt RV Trailer Hitch # 13703 Require a Support Strap
• When using Curt Class I and II 1-1/4-inch trailer hitches and some Class III hitches, such as the Curt Adjustable Width RV Trailer Hitch # 13703 you referenced, you will need to use a stabilizer strap like the Curt Stabilizer Strap # 18050 on items such as bike racks, cargo carriers, etc., or else the warranty Curt provides will be voided. The Curt hitch features a 3500-lb GTW and a 350-lb tongue weight with side brackets that fit frames from 22- to 72-inches wide. The purpose of the strap is
  view full answer...


• Curt Stabilizing Strap for Adjustable Width RV Hitch # 13703
• Per the warranty of the Curt # 13703, a stabilizing strap like part # 18050 would need to be used for hitch accessories like bike racks or cargo carriers. The strap is designed to provide additional support for the hitch mounted accessory. Curt has the same warranty stipulation on the majority of their Class I and II passenger vehicle hitches. Finding a place to attach the hook on the end of the strap is usually pretty simply, but can be more difficult with a motorhome. There are other multi-
  view full answer...


• Will Curt Adjustable Width Trailer Hitch 13703 Fit a 2013 Heartland 5th Wheel
• Based on the measurements you provided the # 13703 Curt adjustable RV trailer hitch should fit your 2013 Heartland 5th wheel trailer. The section of the side brackets with the four horizontal mounting holes is only 4-7/8 inches tall, so you should not have an issue with clearance inside a 10 inch I-beam. The two vertical attachment holes on the side brackets are only used if there is enough clearance, so it would not be an issue if the lower lip is too shallow for these attachment points. The
  view full answer...


• Trailer Hitch Recommendation for a 2006 Keystone 5th Wheel Trailer
• A lot is going to depend on what you plan on using the hitch for. The bumper mount hitch like # E-100 is designed to fit on a 4 inch square, continuous welded steel bumper. You would have to make sure the trailer bumper is rated for use with a hitch before installing it. The best option is always going to be a frame mount hitch. Though they cost more they are much more secure. The most versatile one we have is # 13703. It fits C-channel, Box, and I-Beam frame styles from 22 inches wide to 72
  view full answer...


• Will the Curt Adjustable Width Hitch # 13703 Fit on a 40ft Grand Junction 5th Wheel Trailer
• To determine if the Curt Adjustable Width Trailer Hitch, # 13703, will fit on your 40 ft Grand Junction fifth wheel, you will want to measure the width of the frame on the inside of the frame rails. Your frame must be between 22 inches to 72 inches wide. This is a universal hitch that is designed to bolt or weld on to a box, C-Channel or I-Beam frame. I did some research on your trailer and unfortunately Dutchmen was not able to give me specific information about your trailers frame width or
  view full answer...


• Dimensions of the Curt Bumper Mount Trailer Hitch # E-3S
• I pulled the Curt Bumper Mount Hitch, # E-3S, from the warehouse and made a video showing you the measurements that you were asking for. The wider holes, closest to the receiver opening, are 1-1/4 inches wide and accept a 3/4 inch diameter bolt. The bolt holes measure 10-3/4 inches at their widest points and 7-1/4 inches at their closest point. With the bolts set at the widest point, they measure 9 inches apart on center and 8 inches apart at the closest point.
  view full answer...


• Trailer Hitch for a 2001 Keystone Montana 32 Ft 5th Wheel Trailer
• You will need to measure the outside to outside frame measurement on your 2001 Keystone Montana 5th wheel trailer to determine if the multi-fit motorhome trailer hitch # 82200 will fit. This hitch will fit on frames that are 31 to 46 inches wide. I have included a link to the installation instructions for you to view that will also help to determine fit. Another key measurement is from the bottom of the frame where the hitch attaches to top of the receiver. On this hitch it is 2 inches. If you n
  view full answer...


• Trailer Hitch Recommendation for the Step Bumper on a 2010 Ford Ranger
• If the bumper itself has a hole for a ball then you could just use the bumper to tow. Consult the owners manual for the capacity (usually up to 3,500 pounds on many applications, the owners manual should have the correct information). If you need to add a receiver then a hitch like # E-3S is going to be the best option. Take a look at the picture I have included to see the mounting hole dimensions. I have also linked the instructions for you. I have also included a link to the frame mount traile
  view full answer...


• Hitch Recommendation for a 2004 Toyota Tundra SR5
• In order to determine whether or not the Curt Specialty Trailer Hitches # E-3S would fit on your 2004 Toyota Tundra without drilling you will need to check out the picture I attached that shows the dimensions of the mounting holes for this hitch and compare them to your bumper. You should note that while this hitch is rated for 500 lb of tongue weight and 5,000 lbs of gross trailer weight you will still need to avoid exceeding the weight capacity of the bumper of your vehicle. If you are l
  view full answer...


• Recommended Bumper Mount Receiver for Travel Trailer
• As long as the bumper is not aluminum, and the seams on the bumper are continuously (not spot) welded, a bumper hitch like those you mentioned can be used. You will also need to ensure that the bumper is rated to handle the weight of the bikes plus the rack. Of the three, I would recommend the Curt # E-100 because of its higher capacity and tougher construction. You do not mention which bike rack you are planning on using. You will want to be sure to use a bike rack that is approved for u
  view full answer...


• Hitch Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401
• The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches we carry have a 2-inch size receiver opening. We have the Brophy Hitch Reducer, part # HT02, that will reduce a 2-inch hitch to a 1-1/4 inch size, because it is a sleeve design it will not reduce the tongue weight capacity. Since you did not mention what you will be doing with the bumper mount hitch, I cannot for sure recommend the # HT02 hitch r
  view full answer...


• Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401
• The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches will have a 2-inch size receiver opening. Trailer hitch receiver sizes are available in three different sizes, 1-1/4 inch, 2-inch, and 2-1/2 inch. The two most common sizes would be the Class I and Class II 1-1/4 inch, and the Class III and Class IV 2-inch. The Class V 2-1/2 inch size is used on heavy-duty trucks. I am including a link to a FAQ
  view full answer...


• Does the SnowSport Hitch for the Kawasaki 750 Brute Force 2 Hitch come with Bolt for Factory Hitch
• Yes, the SnowSport Specialty Trailer Hitch # A60120 that you referenced comes with the bolt that will mount to the factory hitch of your 2007 Kawasake 750 Brute Force. You can see the bolt in the picture I attached.
  view full answer...


• Hitch Options for Open Range 399BHS Travel Trailer
• We offer several different options for installing a hitch on the rear of a camper or RV. If you click on the provided link, you can see the available options. Current pricing information is listed on each product description page. Frame mounted hitches like the # 13703 are a good option if the frame members of the camper are within the width range for the hitch, which is between 22 and 72 inches in this case. Although various frame mounted hitches carry a tongue weight capacity ranging from 2
  view full answer...


• Will Agri-Cover Trailer Hitch # A60100 Fit a 2005 or 2006 Suzuki King Quad 700
• The Agri-Cover hitch # A60100 will fit a 2005 or 2006 Suzuki King Quad 700. It actually fits 2005 to 2008 450, 700, and 650 models.
  view full answer...


• Bumper Mounted Hitch Recommendation to Tow a Small Trailer and a Golf Cart
• The main purpose of the Swagman Bumper Mount Adapter, # S64025, is to carry a bike rack behind your RV and it should not be used for towing. Instead, I would recommend installing a universal RV trailer hitch like the Curt Adjustable Trailer Hitch, # 13703, if you are looking for a hitch for an RV. This hitch will fit frames 22 inches to 72 inches wide and it has a 3,500 lb towing capacity and a 350 lb tongue weight capacity. For a bumper mounted receiver, you can look at the Curt Bumper
  view full answer...


• Can Curt Adjustable Width Trailer Hitch for RVs # 13703 install on the Outside of an I-Beam Frame
• I spoke with my contact at Curt about hitch # 13703 and he said that you can install the side brackets on the outside of an I-beam frame by turning them around. I have included a link to the installation instructions for you to view. The hitch can be bolted or welded on. If you choose to weld it on the welding should be done by a qualified professional.
  view full answer...


• Comparing Curt Bumper Mount Trailer Hitch E-100 and Frame Mount 13703
• Both the frame mount hitch # 13703 and the bumper mount # E-100 have 2 inch receivers. Both are rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. The bumper mount E-100 is more limited as to what it will fit on. First, the bumper has to be rated for use with a hitch. It must be a 4 inch square continuous welded steel bumper. A bumper mount hitch in general is not as stable as a frame mount. The frame mount 13703 can be bolted or welded on. It fits box frames, I-beam
  view full answer...


• Trailer Hitch Recommendations for a 2009 Toyota Tacoma 2 Wheel Drive Access Cab
• Based on the measurement you have provided, the Curt bumper mount hitch # E-3S will not fit your 2009 Toyota Tacoma. One set of mounting holes are spaced to close together and the other set too far apart to fit your bumper. I recommend a custom fit frame mount hitch, # 87581, which fits all models except the X-Runner. A frame mount hitch is going to give you higher capacity than a bumper mount hitch. I have linked instructions and an install video for you. Another option is to use the bump
  view full answer...


• Hitch Recommendation for a 2004 Lexus GX 470
• Part # E-3S has an 8-3/4inch, center to center set of mounting holes and a 6-1/16 inch set of holes. Check your bumper to see if these bolt holes would work for you. If so, then this hitch will fit on your 2004 Lexus GX470. However, I would recommend you get a custom install hitch that will install on the frame of your vehicle and have much better capacities like the Hidden Hitch Trailer Hitch # 70779. I can guarantee this hitch will work for you as it is confirmed to fit and we have an insta
  view full answer...


• Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 2007 Toyota Tacoma Bumper
• The Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2007 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. I am includi
  view full answer...


• Trailer Hitch Recommendation for a Montana 5th Wheel Trailer to Carry a Dirt Bike and Bicycles
• You may be able to use hitch # 41991-07 which is designed for heavy duty truck applications. this is a weld on hitch good for frames up to 62 inches. The brackets are 7 inches tall. There is another hitch with 18-3/4 inch brackets, # 41991-18. Another option is to use a Blue Ox carrier and special receiver. The receiver is # SC9000. It requires the frame go all the way back to the rear of the trailer. You could then use a carrier like # SC2100.
  view full answer...


• Hitch Recommendation for a 2005 Mazda 3
• For your 2005 Mazda 3 you would want a Hidden Hitch # 60201. This hitch is specifically designed to work on your vehicle, whereas the Curt Hitch # E-3S is a universal hitch that is designed to work on the bumpers of trucks and because of that would not work for. Check out the installation video and installation instructions I attached for this product also. This hitch comes with a drawbar as well as a pin and clip, but you may also be interested in the following products to complete your
  view full answer...


• Hidden Hitch Recommendation for a 2009 Nissan Frontier Towing a 16-1/2 ft Boat
• For a hitch for your 2009 Nissan Frontier I would recommend you get a Hidden Hitch Trailer Hitch # 87539. This hitch will install onto the frame of your vehicle which will provide a much stronger attachment point then what the Curt Hitch # E-3S, which you may not need for your 16-1/2 foot boat, but in the future if you ever wanted to pull something heavier. You will need to know your vehicles towing capacities (listed in the owners manual) and the weight of your trailer to know if your vehicl
  view full answer...


• Will the Curt Adjustable Width Trailer Hitch 13703 Fit a 2010 Coachman Catalina 29RLS Trailer
• The Curt Adjustable Width Trailer Hitch, # 13703, fits frames that measure 22 to 72 inches measuring from outside to outside so it should fit a frame that measures 64 inches inside to inside. It will also fit C-channel and box frames as well as I-beam frames. You will need to use a stabilization strap, # 18050, with this hitch for Curts warranty requirements. I have included a link to the installation instructions for the hitch for you.
  view full answer...


• Hitch Recommendation for a 2011 Big Horn 5th Wheel Trailer
• I believe I have a hitch you could install on the rear of your 2011 Big Horn Fifth Wheel Trailer, but the 3- Receiver for Blue Ox Sport Carriers is designed for Class A motorhomes. Check out the Adjustable Width Trailer Hitch Receiver # 13703. This is an adjustable hitch that would work on your trailer and can work on frames that are up to 72 inches so it should work on your trailer frame. I attached installation instructions for this hitch for you to check out also.
  view full answer...


• What is the Widest Setting and Bolt Hole Measurement for Multi-Fit Trailer Hitch # 82201
• The max width the multi-fit motorhome trailer hitch # 82201 will fit is 71 inches. That is measured from the outside of one frame rail to the outside of the other frame rail. I have included a link to the installation instructions for you. You need to measure your frame rails to determine fit. When set at its widest point the bolt holes are approximately 69 inches apart on center.
  view full answer...


• Trailer Hitch and Bike Rack Recommendations for an Evolution 1 Pop-up Camper
• You would have to have a 4 x 4 inch continuous welded steel bumper to use the RV bumper hitch, # S64025. Making modifications to the bumper may not provide the needed mounting surface and it will void the warranties of the hitch and possibly the camper. If you want to add a trailer hitch, I recommend a frame mounted one. I have included a link to all of the frame mount hitches for trailers and RVs that we carry. Only certain bike racks can be used on the back of an RV or trailer and I have
  view full answer...


• Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 1999 GMC Sonoma to Carry a Bike Rack
• In order to determine if the Curt bumper hitch, # E-3S will work on your 1999 GMC Sonoma, you will need to look at the mounting holes on the hitch and the hitch dimensions in the pictures I have provided and then compare them with your truck. The other option is to use a custom fit hitch like # 87525. This hitch fits a 1999 GMC Sonoma with factory step bumper. I have included some informational links on it for you. And yet a third option is to use a bike rack that attaches to the bumper h
  view full answer...


• Trailer Hitch Recommendation for Carrying a Bike Rack on a Trailer
• The Ultra-Fab bumper mount hitch # UF35-946402 is designed specifically for 4 inch x 4 inch square steel bumpers that are continuous welded. A slightly larger bumper will not be compatible. If by trimming the trim piece the bumper is still structurally sound and is 4 x 4 inches, it would fit. The best thing to do, if you are concerned with providing the safest and best ride for your bikes is to use a frame mounted trailer hitch, see link. The most popular option is # 13703. I have included a
  view full answer...


• What is the Length of the Receiver and the Bracket Dimensions on Curt RV Trailer Hitch # 13703
• On Curt RV trailer hitch # 13703, from the hitch cross tube to the end of the receiver measures 11 inches. I have included a link to the installation instructions and a link to a picture showing the bracket measurements for you. This measurement picture is also on the product page and you can view it by clicking on the last picture or scrolling down the page a little.
  view full answer...


• Dimensions of the Brackets for Curt RV Trailer Hitch # 13703 and Will it Fit a 68.5 Wide Frame
• The Curt RV trailer hitch, # 13703, is adjustable to fit frames measuring 22 inches to 72 inches apart so your 68.5 inch frame width is within that range. I have included a link to the installation instructions for you to view. I have also included a picture that shows the mounting bracket dimensions for you.
  view full answer...


• Receiver Needed for 5th Wheel with 4 Inch Bumper with 5-1/2 Inch Drop
• Given the 5-1/2 inch distance between the bottom of the frame members and the bottom of your bumper, the # 13703 will not fit your application. The E-100 you mention is intended for use with 4 inch square bumpers, as well as the Ultra-Fab # UF35-946402. If you have clearance problems at the rear of the bumper, the Ultra-Fab receiver might be a good alternative as it connects to the underside of the bumper using U-bolts, rather than slipping around it like the E-100 does. Either receiver ha
  view full answer...


• Will Curt Bumper Mount Trailer Hitch # E-100 Fit a 4-1/4 Inch Bumper on a Starcraft Starsteam 24QB
• The Curt hitch # E-100 needs a 4 inch square continuous welded steel bumper to install safely. If by removing the decorative trim, you are left with a 4 inch square continuous welded steel bumper, then this hitch will work for you. Be sure to check the owners manual to determine if the bumper can be used for this application. the safest option is to go with a frame mount hitch. I have included a link to the options for you. The most popular is Curt hitch # 13703 because it fits a wide range o
  view full answer...


• Mounting Ultra Fab # UF35-946401 Under Bumper
• It is acceptable to mount the Ultra Fab # UF35-946401 underneath the bumper. Make sure the 200 lb capacity of the receiver or the capacity of the bumper (whichever is lower) is not exceeded. This receiver is meant to mount to a 4 inch Steel RV bumpers, and not to a car or truck. It is not intended to be used for towing purposes.
  view full answer...


• Distance from the Crosstube to the End of the Receiver on Curt Motor Home Trailer Hitch # 13703
• I can tell you from the back of the crosstube to the receiver face measures 11 inches. Based on the measurements that you have given on your RV, it sounds like the receiver opening would be under the bumper, possible recessed a little behind the bumper. It should still be accessible easily enough. I have included a link to the installation instructions for you.
  view full answer...


• Trailer Hitch Recommendation for a 2012 Coachman 30 Foot 5th Wheel Trailer
• The hitch that I recommend most that fits most anything is the Curt hitch, # 13703. It will fit frames from 22 inches to 72 inches wide. It can be bolted or welded on (welding should be performed by a qualified professional). It fits box, C-Channel, or I-Beam frames. The capacity is 3,500 pounds gross trailer weight and 350 pounds tongue weight. I have included a link to the installation instructions for you to view. Please note that in many states, it is illegal to tow a trailer behind a
  view full answer...


• Recommendation for a Weld-On Trailer Hitch for a Freightliner Step Van
• Your best option is either going to be going with a Curt hitch, # 15902, or going with one of the hitches with 16 inch brackets like # 41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the installation. I have included a link to the installation details for the Curt hitch for you.
  view full answer...


• Will the Curt Adjustable Width Trailer Hitch 13703 Fit a 2012 Sabre Silhouette 291BHTS Trailer
• It is very likely that the Curt trailer hitch # 13703 will fit your trailer. It is a universal fit so there is no specific list of trailers that it will fit. You have to look over the instructions which I have linked for you, and compare them to your trailer to determine fit. This trailer hitch fits trailer frames 22 inches to 72 inches wide. It can be bolted or welded on. It will fit box frames, C-channel frames, or I-beam frames. If you choose to have the hitch welded on, the welding sh
  view full answer...


• Recommendation for Making an RV Sewer Hose Carrier
• At this time we do not carry a sewer hose carrier for the back of an RV but I have a solution for you. You will need to make a run to your local home improvement store to assemble all the necessary parts. You can build one of these tubes fairly easily by using 4 inch diameter PVC tubing (go 5 inch or even 6 inch if you want to keep your hose ends on) and two residential sewer clean-out screw caps, found at any home improvement center. Cut to your desired length and mount using plastic u-brack
  view full answer...


• Distance from the Motorhome I Beam to the Center of the Vertical Holes in the RV Receiver Hitch
• I went out to the warehouse and measured the distance from where the hitch side plate will attach to the web of your motorhome I-Beam, and I got 1-1/4 inches on center. I attached a photo showing the measurement from the outside of the plate to the center of the vertical bolt holes.
  view full answer...


• How Wide is Curt Universal Weld On Trailer Hitch # 15903
• The maximum width of the Curt hitch, # 15903, is 60.88 inches. The minimum it can be is 18 inches. This is measured from the inside of one mounting flange to the inside of the other mounting flange. I have included a link to the instructions that show these dimensions.
  view full answer...


• Can Ultra-Fab Motor Home Hitch # UF35-946402 Be Used To Tow a Trailer Behind a Fifth Wheel
• The RV hitches like the Ultra-Fab 2 Inch Motor Home Trailer Hitch, part # UF35-946402, are designed to be used on the back of an RV to haul bike racks and cargo carriers. This hitch is one of the only ones that says for light-duty towing also. It states a 350-lb maximum tongue weight capacity, but you will want to make sure not to exceed the weight capacity of your fifth wheel bumper. We do not recommend towing two trailers because the tongue weight of the second trailer will be applied to th
  view full answer...


• Trailer Hitch Mount Bike Rack Recommendation for use with a Curt Motor Home Trailer Hitch
• As you probably know, there are only certain bike racks that are rated for use behind an RV or trailer. The Swagman XTC-2, # S64670, is one that you can use. The trailer hitch, # 13703, requires that you use a stabilizer strap, # 18050. Curt requires the strap to be in compliance with their warranty. The strap is actually a good idea when using a bike rack at the back of an RV or trailer. The reason is that the strap reduces a lot of that up and down bouncing movement which reduces stress on
  view full answer...


• Trailer Hitch Recommendation for a 2005 Savoy SL Travel Trailer
• What I recommend for a bumper mount hitch is to go with # UF35-946401 which fits 4 or 4-1/2 inch bumpers. That way you would have options if the 4 inch is too small. However, use a bumper mount hitch only if it is a square continuous welded steel bumper. If the bumper is not square, not continuously welded, and/or not steel, I recommend using a frame mount hitch. The most popular frame mount hitch that fits the widest variety of frames is # 13703. It fits box frames, C-channel frames, an
  view full answer...


• Could a Curt Adjustable Width Trailer Hitch be Used to Tow a Small Boat and Trailer
• Absolutely you could. Once installed, this Adjustable Width Trailer Hitch Receiver # 13703 would work great to tow a small boat and trailer. You should note that the capacities of this hitch are 350 lbs tongue weight and 3,500 lbs gross trailer weight. As long as your boat and trailer, plus any coolers and anything else loaded in the boat, weighs less than that amount you would be good. You should also consult the owners manual of your RV to determine the weight capacities of the RV. When
  view full answer...


• CURT Universal Class V Weld-On Hitch Recommendation for a 2011 Fleetwood Terra 31TS
• If you had a very qualified welder install a hitch like a Class V Universal Weld-on Receiver Hitch # 15901 on your 2011 Fleetwood Terra 31TS you would have a hitch that is capable of 12,000 lbs GTW and 1,200 TW. This hitch has a 3.45 inch drop. If you need a hitch with a larger drop you should check out the CURT V Universal Weld-on Hitch # 15902. This hitch has the same towing capacities as the # 15901 but it has 13-1/2 inches of drop instead. I attached installation instructions for both
  view full answer...


• What are the Dimensions of the Agri-Cover ATV Yamaha Grizzly Rear Trailer Hitch A60110
• I went out to the warehouse and pulled the Agri-Cover Hitch, 3 A60110 and took some measurements. I made a couple of pictures showing the dimensions I took. The mounting hole pattern is as follows: The two outside holes are 8-1/4 inches apart on center. The inner set of holes are 5 inches apart on center. And the distance between 2 holes on one side is 1-5/8 inches. The distance from the front of the mounting plate to the face of the receiver is 5-3/8 inches. The overall height is 6-5/8
  view full answer...


• What are the Mounting Bracket Dimensions for Trailer Hitch # 82201
• I have actually measured this hitch before. I can tell you that the top of each of the side mounting brackets measures 10 inches long by 2 inches wide. The bolt holes are 8-1/2 inches apart from center to center. The brackets are about 5-5/8 inches tall at the tallest point. I have included a link to the installation instructions for you to view. If you are looking for a hitch to fit an RV or trailer, another option is the CURT Adjustable Width Trailer Hitch Receiver, # 13703. This hitch can
  view full answer...


• Hidden Hitch Recommendation for a 2002 Toyota Tacoma
• I think that your best bet would be to install a hitch that installs onto the frame of your 2002 Toyota Tacoma, like a Hidden Hitch Trailer Hitch Receiver # 87579. Not only will you have a much higher towing capacity, you will not have to make any permanent modifications to your vehicle bumper that might void the warranty of the vehicle. I attached installation instructions and a review video for this product for you to check out also. To complete your towing setup you may be interested in
  view full answer...


• Bumper Mount Trailer Hitch Recommendation for a 2002 Toyota Tacoma
• The CURT Bumper Hitch, # E-3S, would be a good choice. Make sure to check the dimensions of the hitch against the space on the bumper to ensure fit. The dimensions are shown on the last two pictures on the product page. If you do not have the holes present on the bumper you will need to drill. I have included a link to the installation details for you. The other option is to install a frame mount trailer hitch. The most popular frame mount hitch for a 2002 Toyota Tacoma is Hidden Hitch # 8757
  view full answer...


• Will CURT Bumper Trailer Hitch # E-3S Fit a 2005 Chevy Silverado with Southern Comfort Package
• From what I could find, the Southern Comfort package on a 2005 Chevy Silverado did not affect the bumper. What you can do to determine if the CURT Bumper Mount Trailer Hitch, # E-3S, will fit is to measure the area of the bumper where the hitch will install and compare that to the dimensions of the hitch. The top flat part of the hitch is 11 inches by 4 inches. The bolt holes closest to the receiver opening are 8-3/4 inches apart on center. The other set of bolt holes is 6 inches apart on ce
  view full answer...


• Using Spacers to Install CURT Trailer Hitch # E-3S on a Step Bumper
• The CURT Step Bumper Trailer Hitch, # E-3S, comes with some square spacers, part 5 in the instructions linked for you, just in case the bumper does have that protrusion on the underside of the bumper. These spacers are 1/4 inches thick. If you are using these and still have 1/8 of a gap, a slightly thicker spacer can be used as long as you make sure to tighten the bolts as specified in the instructions.
  view full answer...


• Receiver Hitch Recommendation for a 1992 Thor Pinnacle Class A Chevroler Motorhome
• For your application I would recommend the hitch with the highest gross trailer weight, and tongue weight rating. Determining the width of the frame on your motor home will allow you to select the hitch that will be the best match for your towing needs. The hitch you selected, # 82201, has a 3,500 pound gross trailer weight rating and 300 pound tongue weight rating. The ratings are lower on this hitch because of its extra width. If you could possibly select a hitch designed for a smaller fram
  view full answer...


• What is the Weight Limit on Ultra-Fab 2 Inch Motor Home Trailer Hitch Receiver
• The Ultra-Fab Motor Home Trailer Hitch Receiver, # UF35-946401, was designed with the RV/trailer application in mind. As such the additional torque from accessories bouncing in the receiver was taken into account when the weight capacity of 200 pounds was given to the hitch. You might want to consider going with something rated a little higher, like # E-100, or # UF35-946402, which both have a 350 pound capacity, because with your intended load you will be getting close to the tongue weight
  view full answer...


• Can the CURT Adjustable Width Trailer Hitch Receiver Support a Cargo Trailer and Honda Goldwing
• First, in many states, it is illegal to tow a trailer behind another trailer, so you will need to check the laws in the area you will be traveling. It can be dangerous to tow a trailer behind another trailer because it increases the chance of jack knifing and increases the amount of momentum making braking more difficult. Turning will also be more difficult. The CURT Adjustable Width Trailer Hitch Receiver, # 13703, has a gross trailer weight capacity of 3,500 pounds and tongue weight capacit
  view full answer...


• Fit of CURT 2 inch Bumper Hitch, # E-3S, on 1996 Chevy S-10
• The CURT 2 inch Bumper Hitch, # E-3S, will fit your 1996 Chevy S-10. To view the install instructions, click on the provided link.
  view full answer...


• Hidden Hitch Recommendation for a 2007 Toyota Tacoma Prerunner SR5
• For a hitch for your 2007 Tacoma PreRunner I would recommend a Hidden Hitch # 87581. I attached installation instructions and an installation video for this product for you to check out. The Class IV Weld On Hitch # 41990-07 that you referenced is a universal hitch that is typically used for trucks with service bodys or utility bodys. However, there might be a way to install this hitch on your truck, but unless you have a service body I would recommend the # 87581. If you plan on doing som
  view full answer...


• Which Draw-Tite Trailer Hitch Fits a Full Size 1988 Ford Bronco
• The Draw-Tite Trailer Hitch, # 41990, is a weld together application for service body trucks. For your 1988 Ford Bronco, the correct Draw-Tite Hitch is # 40050. Please note it will not fit models with a roll pan bumper. I have included a link to the installation instructions for you. If you will be doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag. For trailer wiring, use CURT T-Connector Vehicle
  view full answer...


• Will CURT Trailer Hitch # 13703 Fit a 2011 Open Range 345RLS 5th Wheel Trailer
• It is possible that the CURT Adjustable Width Trailer Hitch Receiver, # 13703, can be directly attached to the brackets on your 5th wheel trailer. The hitch is designed as a universal application and as such there are no specific trailers it was designed to fit. If there is a specific hitch that matches the brackets, you should be able to find out what it is in the owners manual or from the folks where you bought the 5th wheel. If the frame of the trailer is 22 inches to 72 inches wide, th
  view full answer...


• Recommendation for Carrying a Trailer Hitch Mount Cargo Carrier on a Truck or Trailer
• I have a solution for you that you may find better than putting a hitch on the back of the trailer. Take a look at CURT Multipurpose Ball Mount, # D210. With this ball mount, you would be able to tow the trailer with the ball mount portion and carrier a cargo carrier on the top receiver portion, provided that the combined tongue weight of the trailer, cargo carrier, and generator does not exceed 750 pounds, and the total weight placed in the ball mount receiver does not exceed 350 lbs. The ba
  view full answer...


• Recommendation for Transmission Cooler and Engine Oil Cooler for 2007 Dodge Grand Caravan SXT
• Installing a transmission cooler and an oil cooler on your 2007 Dodge Grand Caravan is an excellent idea if you are hauling or towing loads of any amount of weight. It will help keep the temperatures of the fluids down which will help prolong the life of the transmission and engine in your vehicle. It would not be too much for your vehicle. I would recommend the Derale Combination Transmission and Engine Oil Cooler, part # D15902. With this part you will only need to find room to mount one co
  view full answer...


• Trailer Hitch Recommendation for Use on the Back of a Crossroads 5th Wheel Trailer
• We have a couple of different options in terms of trailer hitches for 5th wheel trailers. The Curt Hitch, # E-100, that you have referenced is designed to fit on 4 inch square channel bumpers. You will need to check to see if your bumper fits this description and if it is rated for this application. I recommend going with a frame mount hitch. The most versatile frame mount hitch we offer is Curt Hitch, # 13703. It can be bolted or welded on and fits C-channel, I-beam, and Box frames. Any weld
  view full answer...


• Is it Safe to Carry a Bike Rack and Bikes with Swagman Specialty Trailer Hitch, # S64025
• It is safe provided that the bumper and trailer are rated for this type of application. You will need to find out the weight capacity of the bumper and if there are any restrictions on what you can carry on it using the Swagman Specialty Trailer Hitch, # S64025. Another option would be to install a frame mounted trailer hitch to the trailer. I recommend the Adjustable Width Trailer Hitch, # 13703, because it fits frames from 22 to 72 inches wide, and box, I-beam, or C-channel frames. I have i
  view full answer...


• Curt Adjustable Width RV Hitch Part # 13703 for 2011 Open Range 424 RLS 5th Wheel
• The Curt Adjustable Width RV Hitch, part # 13703 is a semi-universal fit item that is meant to fit many different applications. Assuming that the frame members on your fifth wheel are between 22 and 72 inches apart, this Curt hitch should work just fine for you. This hitch can either be bolted or welded into place. To see the install details, click on the provided link.
  view full answer...


• Availability of RV Hitch to Fit a 2009 Montana 3685sa Fifth Wheel Trailer
• The most versatile RV frame mount hitch I have would be the Curt Adjustable Width Trailer Hitch, part # 13703. This hitch can be welded on or bolted on and fits frames from 22 inches wide up to 72 inches wide. It will also fit various frame styles like a Box frame, C-Channel frame, and I-Beam frame. It has a towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. I am including a link to the installation instructions on the Curt hitch. Also, I have four other RV hitche
  view full answer...


• How To Determine Towing Capacity of an RV Bumper that is 4 Inch Square 1/8 inch Thick Steel
• The best way to determine what the towing capacity of the bumper on your RV would be to contact the manufacturer of your RV and ask what the bumper gross towing weight capacity is. I attached installation instructions for the Curt 2 inch Bumper Hitch # E-3S for you to check out also.
  view full answer...


• How Does Curt Adjustable Trailer Hitch # 13703 Mount to an I-Beam Trailer Frame
• The way the Curt Trailer Hitch, # 13703, mounts to an I-Beam frame is that the top bracket on either side of the hitch attaches to the middle, vertical part of the frame. It sounds as if at that point you have 74 inches. If that is the case then this hitch is not long enough. I have included a link to the installation instructions that show where it attaches for you to view. What you may be able to do is have a hitch fabricated using some of our fabrications parts. I have included a link to t
  view full answer...


• What are the Dimensions of the Mounting Bracket for Hidden Hitch Trailer Hitch # 82201
• On the Multi-Fit Motor Home Trailer Hitch, # 802201, the top of each of the side mounting brackets measures 10 inches long by 2 inches wide. The bolt holes are 8-1/2 inches apart from center to center. The brackets are about 5-5/8 inches tall at the tallest point. I have included a link to the installation instructions for you to view. Another option is the Adjustable Width Trailer Hitch Receiver, # 13703. This hitch can mount to I-Beam, C-Channel, or box frames. It can also be welded or bolt
  view full answer...


• RV Hitch Needed to Carry Hitch Bike Rack or Cargo Carrier on a Wilderness Trailer
• You will need to determine the width and construction of your Wilderness trailer frame to be able to select the correct RV frame mount hitch, see link. One of the most versatile RV frame mount hitches we stock is the Curt Adjustable Width Trailer Hitch, item # 13703. This hitch will fit frames from 22 inches wide up to 72 inches wide and can be used on a Box, C-Channel, or I-Beam frames. This hitch can also be bolted on if you like, see instructions link.All non-trailer loads applied to this
  view full answer...


• Will Adjustable RV Trailer Hitch, # 13703 Fit a 2004 Montana 5th Wheel Trailer
• If you look at the installation instructions for the Adjustable RV Trailer Hitch, # 13703, linked for reference, you will see that the hitch attaches to the frame rails but not at the receiver tube. The side brackets can be bolted or welded to I-beam, C-Channel, or box frames. If you choose the welding option, the installation should be done by a qualified professional welder. Since you will be using this hitch for a bike rack, you will also need a stabilization strap to be in compliance with
  view full answer...


• How to Attach a 1-1/4 Inch Hitch Bike Rack to a RV Bumper Hitch
• I would recommend to use the Brophy Hitch Reducer, part # HT02. This reducer will insert into a 2 inch hitch receiver on your RV and allow you use your 1-1/4 inch hitch bike rack. It will extend out from the original hitch pin hole an extra 3 inches. Hopefully, an extra 3 inches would not cause you any problems. It comes with a 1/2 inch pin and clip for the hitch accessory, but you will also need a Hidden Hitch 5/8 Inch Pin and Clip, part # PC3 to attach the reducer to the hitch. There ar
  view full answer...


• Trailer Hitch Recommendation for a Passport Trailer
• The Curt RV Bumper, # E-100, is designed to fit on a 4 inch square channel bumper. If this is the type of bumper you have, then the hitch will fit. You will want to check your RV owners manual to determine if he bumper is rated for this type of application and if so, what its capacity is. If you determine this hitch will not work, I recommend installing a frame mounted hitch, # 13703. This hitch fits box frames, C-channel frames, and I-frames that are 22 inches to 72 inches wide. I have inclu
  view full answer...


• Trailer Hitch Recommendation for a 2005 Cedar Creek 5th Wheel Trailer
• I do believe I have just the right trailer hitch for your 5th wheel trailer. Take a look at the Curt Adjustable Width Trailer Hitch Receiver, # 13703. It will fit trailer frames up to 72 inches wide and it is compatible with I-Beam frames. The hitch can be welded or bolted to the trailer frame. If you choose to have it welded on, it should be done by a qualified professional welder. I have included a link to the installation details for you to view. Just a quick word of caution; I advise agai
  view full answer...


• Reese Trailer Hitch # 41940 Recommendation for a 2001 Ford F-550 Cab and Chassis
• If you have a 34 inch wide frame I would recommend that you get a Reese Trailer Hitch, part # 41940. This hitch is specifically designed to work on a Cab and Chassis 2001 Ford F-550 like what you have. You may need the following items to complete your towing setup: Forged Ball Mount 3 inch Rise or 4 inch Drop, part # 40331 Hitch Ball with 2 inch Diameter and Medium Shank, part # A-90 Hitch Ball with 2-5/16 inch Diameter and Medium Shank, part # 19286
  view full answer...


• Recommendation for a Bumper Mounted Trailer Hitch for an RV, Trailer, or Motorhome
• It sounds like the Ultra-Fab Bolt On Receiver, part # UF35-946401 would be your best bet. This receiver will bit bumpers up to 4-1/2 by 4-1/2 inches. This receiver is designed for mounting accessories like a bike rack, and not for towing purposes. It has a 200 lb capacity. You will want to make sure your bumper is rated for this application and do not exceed the capacity of the bumper or hitch, which ever is lower.
  view full answer...


• What Size is the Cross Tubing Used in Draw-Tite Trailer Hitch # 41991
• I spoke with my contact at Draw-Tite regarding trailer hitch # 41991. He stated that the outside diameter of the cross tubing is 3 inches by 3 inches. The wall thickness is 0.238 inches so if you were to round that up to 1/4 inch, the inside dimension would be 2-1/2 inches by 2-1/2 inches.
  view full answer...


• What are the Dimensions of the Mounting Plate on Curt 2 Inch Bumper Trailer Hitch, # E-3S
• I went out to the warehouse and pulled a Curt 2 Inch Bumper Hitch, # E-3S, to take some measurements. The center to center distance between the two round holes is 6 inches. They measure 5-7/16 inches apart, inside edge to inside edge. They are 9/16 inches in diameter. The elongated holes are 7-5/16 inches apart, inside edge to inside edge. From the front of the elongated holes to the edge of the flat platform measures 5/8 inches. The elongated holes measure 1-1/4 inches by 13/16 inches. From
  view full answer...


• Does the Curt 2 inch Bumper Hitch # E-3S work on a 1995 Silverado Short-bed 1500
• The Curt 2 inch Bumper Mounted Hitch, 5,000 lbs GTW, item # E-3S, will work for towing up to the 5,000 pound gross trailer weight rating and 500 pound tongue weight rating of the hitch or the capacity of your truck step bumper, whichever is lowest. You should check the capacities of your step bumper and the gross trailer weight and tongue weight of the trailer you will be pulling to be sure it is within the capacity of the hitch and bumper. I have provided installation instructions for you
  view full answer...


• Trailer Bumper Mount Bike Rack Recommendations for a Camper with Rear Mounted Spare Tire
• If your bumper is rated for towing and/or carrying weight, we offer several bike rack options that are rated for use behind a trailer or RV. Take a look at the Swagman Around the Spare Mighty Rack, # S80500. This rack is designed to fit a 4 to 4-1/2 inch continuous welded square bumper and fit around the spare tire. I have included a link to the installation details for reference. Another option is the RV Bumper 2 Bike Rack, # S80605, or Swagman 4 Bike Carrier RV Mounted Bike Rack, # S80600.
  view full answer...


• Recommendation for a Trailer Hitch for a Jayco 27.5 RKS Fifth Wheel Trailer with I-Beam Frame
• We do have an RV mount trailer hitch that is designed to be compatible with I-beam trailer frames. It is the Adjustable Width Trailer Hitch Receiver, # 13703. This hitch fits frames from 22 inches wide to 72 inches wide and will fit box, c-channel, and I-beam frame styles. This hitch can also be bolted or welded on. If you choose to weld it on, any welding should be done by a qualified professional welder. I have included a link to the installation instructions for this hitch for you to view.
  view full answer...


• Will RV Bumper Mount Trailer Hitch # E-100 Fit a 4 Inch by 2 Inch Bumper on a Trailer
• I do have a possible solution for adding a trailer hitch to your trailer but # E-100 will not fit because the bumper on your trailer needs to be 4 inches by 4 inches (100mm x 100mm). I recommend installing a frame mount trailer hitch, # 13703. This hitch can be welded or bolted to the frame of a trailer provided the trailer frame is 22 to 72 inches wide. If welding, the hitch should be installed by a qualified professional welder. I have included a link to the installation details for you to rev
  view full answer...


• 1992 Chevrolet 30 Foot Mallard Class C Motorhome Trailer Hitch Recommendation
• Since the frame on your Class C Motorhome is 43 inches outside width you will need one of two hitches for your application. The Hidden Hitch Multi-Fit Motorhome Trailer Hitch, 31 - 46 inches wide, item # 82200, or the Curt Mfg. Adjustable Width Trailer Hitch Receiver for RVs, 22 to 72 inches Wide, item # 13703, are the two choices I would consider. Of the two the Hidden Hitch receiver is the one I would choose, if the mounting brackets will work with the frame on your Motorhome, because the w
  view full answer...


• Is There A Bolt On Bumper Trailer Hitch That Will Fit A 2011 Chevrolet Silverado 2WD
• The CURT Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design, so it is not listed for a specific vehicle. This hitch would mount using four holes, two that would use 3/4 inch diameter bolts, and two that use 1/2 inch diameter bolts. You will need to measure to determine if the CURT # E-3S hitch will work on your 2011 Chevy Silverado 2WD. The 3/4 inch holes are 8-3/4 inches apart, from center to center, and the 1/2 inch holes are 6-1/6 inches apar
  view full answer...


• RV Mounted Trailer Hitch Recommendation for a 2004 Montana 5th Wheel Trailer
• We have numerous RV and travel trailer hitches available, but the most versatile one would have to be the Curt Adjustable Width Trailer Hitch Receiver, # 13703. This trailer hitch will fit on frames ranging from 22 inches wide to 72 inches wide. It will also fit on box frames, C-channel frames, or I-Beam frames. And, the side brackets can be welded or bolted on. The hitch has a tongue weight capacity of 350 pounds, so it will be able to hold the weight of your 200 pound generator and a carri
  view full answer...