Expert Answers about Mufflers

• Which MagnaFlow Exhaust for Deeper Exhaust Note on 2013 Chevrolet Camaro 2LT With 3.6L V6
• The MagnaFlow Stainless Steel Straight-Through Universal Muffler for V6 Camaro, part # MF14277, is a weld-on dual outlet muffler designed specifically for the V6 Camaro with a single transverse muffler. My contact at MagnaFlow indicates that the muffler for your Camaro is part # MF14226. This is a single-inlet, single-outlet muffler made of 100 percent stainless steel and offering unrestricted flow for increased horsepower, torque and fuel efficiency, along with a deeper exhaust tone. This mu
  view full answer...


• Will the MagnaFlow Stainless Straight-Through Muffler # MF14160 Cause any Back Pressure
• The 3-1/2 inch diameter straight-through design prevents any back pressure whatsoever. I have confirmed this with MagnaFlow. The core tube is perforated, which provides a small amount of noise dampening, but will not cause any back pressure.
  view full answer...


• Universal Fit Muffler Recommendation for a 2011 Scion tC
• For a muffler, the size of the model that comes with the MagnaFlow exhaust for a 2011 Scion tC measures 5 inches tall, 8 inches wide, and 20 inches long overall with a 14 inch long body. It also has 2-1/4 inch inlet/outlets. A muffler like # MF14235, has these dimensions. Compare these measurements to what is required on your tC to determine fit. These mufflers are designed as universal fit items. They do make quite a few different sizes but they may not be an exact match.
  view full answer...


• Loud Racing Muffler Recommendation for a 1977 Chevrolet Corvette
• The straight-through style mufflers like the MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Race Series, # MF14161, that you referenced are the loudest mufflers that we carry. The race series mufflers are universal fit applications, so you will want to make sure the inlet and outlet size on the muffler is compatible with your exhaust system. If you still have the stock 2-1/2 inch exhaust pipes on your 1977 Chevrolet Corvette, then I would recommend the MagnaFlow Straight-Thro
  view full answer...


• Are MagnaFlow Mufflers Compatible with the Exhaust on a 1995 Ford F-150 4x4 with 5.8 Liter V8
• The MagnaFlow mufflers will reduce back pressure and free up your exhaust system to flow better, creating more horsepower and torque, but will not reduce the back pressure enough to affect the OEM specs and cause an O2 sensor to throw a fault code. Your vehicle only requires about 2 to 3 lbs of back pressure to function correctly and staying with the original inlet and outlet diameters at the muffler will not affect manufacturer specs. The only time you would be in danger of creating too m
  view full answer...


• Universal Magnaflow Muffler Recommendation for a 2001 Hyundai Elantra
• We base our fits for mufflers on what the muffler manufacturer lists as confirmed fits. The MagnaFlow Stainless Steel Universal Muffler # MF10416 is a universal fit muffler and because of that it does not have any specific fits. There is a chance it would work on your 2001 Hyundai Elantra GLS, but that is something you would need to determine based on the specs of this product that are listed on the product page. This muffler will be pretty loud since it is a straight through design. It would
  view full answer...


• Are Glass Pack MagnaFlow Mufflers Available For a 1998 Mustang GT
• Glass packs are a Universal fit item that require welding for installation. You will most likely need a 2-1/2 inch diameter inlet and outlet for installation on your 1998 Mustang GT, but you should measure the exhaust pipes on your vehicle to be sure. The glass pack mufflers are legal for use, as long as your system is within the local sound ordinance. You will need to check local laws to be sure. If you would like a bolt on system and your Mustang has the V8, 4.6L engine, there are two sy
  view full answer...


• Can the MagnaFlow Tru-X Muffler # 14386 be Used in a Transverse Hot Rod Setup
• Yes, because of the Tru-X Perforated Core, you can install two inlet pipes on the top and the two outlet pipes on the bottom of the MagnaFlow Stainless Steel, Tru-X Universal Muffler, item # MF14386. This setup should work nicely on your mid engine Hot Rod setup.
  view full answer...


• MagnaFlow Muffler and Resonator Recommendations for a 1996 Dodge Ram 2500 with V10 8.0 Liter
• I spoke with my contact at MagnaFlow and he recommended Muffler # MF12599 (if you are running 3 inch piping). He also stated that because of the size of the engine, you would also need to use a smaller, round muffler as a resonator, # MF14419 for 3 inch piping. If you are using different size piping, you would want to use a muffler that measures 5 x 11 x 22 with a resonator that measures 5 x 8 x 14.
  view full answer...


• Will The MagnaFlow Muffler # MF10414 Fit A 2010 Chevrolet Malibu
• The MagnaFlow Muffler, part # MF10414, is a universal muffler so it is not vehicle specific. You will want to measure on your 2010 Chevrolet Malibu to determine if the diameter of the muffler will fit. It is a 4 inch round muffler and measures 20 inches end to end. The inlet and outlet pipe size is 2 inches. This muffler is a straight through design, which will be a very aggressive muffler for your 2010 Chevrolet Malibu. Magnaflow does not have a custom exhaust system available for the 2010
  view full answer...


• Recommendation for a MagnaFlow Muffler that has Agressive Sound for a 2001 Dodge Ram 2500 5.9 Liter
• I spoke with one of my colleagues that has a MagnaFlow Muffler on his Trans AM with the LS1 350 engine and he says it has a nice aggressive tone, does not drone in the cab, and when you accelerate it is louder like most people want. The muffler you selected, item # MF12198 is the smallest Universal muffler that Magnaflow makes and on a larger engine, like the 5.9 liter, this muffler is going to be very loud and will drone. This muffler has a 3 inch inlet and two 2-1/2 inch outlets. The standa
  view full answer...


• Will the MagnaFlow Stainless Steel Universal Muffler # MF14807 Fit the 2006 Mazda 3
• The MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Street Series - Polished Finish, item # MF14807, is a universal design and will fit on many vehicles with a 2-1/4 inch pipe where the muffler installs. Complete dimensions are on the product page, for you to reference when deciding if the universal style muffler will work on your vehicle. We also have the MagnaFlow Stainless Steel Cat-Back Exhaust System - Gas, item # MF15861, fits the 2004 - 2006 Mazda 3 L4 2.0L and 2.3L
  view full answer...


• Will The MagnaFlow Muffler, # MF12468, Fit A 2001 GMC Sierra C-3 Short Bed 6.0 V-8
• Because the 2001 GMC C-3 Truck is a limited version of the Sierra model, Magnaflow does not list a fitment for that vehicle. The MagnaFlow Muffler, # MF12468, you have referenced is a universal muffler that is 5 inches tall and 8 inches wide and 24 inches long. The muffler body length is 18 inches. The fitments they do list for similar trucks like the 2001 GMC C-3 are the 5 inches tall and 11 inches wide and 28 inches long with a muffler body length of 22 inches. They would be the Magn
  view full answer...


• Will the MagnaFlow Stainless Steel Muffler # MF12266 or # MF12268 Fit on a Camaro or Firebird
• The MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Satin Finish - Camaro/Firebird V8, item # MF12266, is designed to fit all Camaro and Firebird vehicles with V8 engines that have a OEM muffler between the rear bumper and the gas tank at the back of the vehicle. The two exhaust outlets are 2-1/4 inches and are directly across from each other on the muffler the offset inlet tube is 2-1/2 inches. The MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Satin Finish,
  view full answer...


• Is the Outlet Diameter Measurement Listed for Magnaflow Mufflers Or is it the Inner Diameter
• The inlet/outlet/tubing diameters listed from Magnaflow are OD, outer diameter, not ID, inner diameter. If your tubing is 2.5 OD you will have to butt-weld the muffler to the exhaust tubing, the exhaust pipe will not slide into the muffler. Any muffler shop can do this. The MagnaFlow muffler, part # MF10416 is not designed to be a slip fit muffler. Your exhaust tubing would need to be designed for slip fit mufflers and have band clamps to apply sufficient pressure to seal the system. This muf
  view full answer...


• Will the Universal Fit Magnaflow Stainless Steel Muffler Fit on a 2008 Chevrolert Silverado
• The MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Satin Finish, item # MF12580, is a universal style weld on muffler that can be used on your 2008 Chevrolet Silverado. You may need a reducer or expander to fit the muffler inlet which is 2-1/2 inches to your existing pipe. Then you will need to match the muffler outlets which are 2-1/4 inches to the tail pipes on your vehicle or have tailpipes made to fit the muffler and your vehicle. In short will need to measure the diame
  view full answer...


• Best Universal Muffler for 2009 Mitsubishi Lancer
• There are two main things that need to be considered when choosing a universal muffler, fit and sound/performance. You will need to choose a muffler with the correct inlet diameter, and sized so that it will fit in the space provided under the vehicle. Mufflers that are more free flowing increase horsepower, torque and fuel efficiency, thus improving engine performance. However, the less restrictive the muffler is, the noisier it is. The MagnaFlow Stainless Steel, Straight-Through Universal M
  view full answer...