Expert Answers about Motorhome Accessories

• Weight Load Capacity for the Surco Lawn Chair Rack # SP501CR
• I spoke to my contact at Surco and she informed me that the weight capacity for the Surco Lawn Chair Rack # SP501CR is 50 lbs. So you should have no problem carrying your 2 20 lb lawn chairs.
  view full answer...


• What are the Dimensions of the Ultra-Fab Steel Mini-Roller for Trailers and RVs UF48-979022
• I went out to the warehouse and pulled roller # UF48-979022 to take some measurements. The overall height is actually 2-13/16 inches. The wheel does have a 2 inch diameter. The mounting bracket itself is 2-5/16 inches across and 2 inches front to back. I have included a picture with the dimensions for you.
  view full answer...


• Does the Ultra-Fab Steel Mini-Roller # UF48-979022 Have a Grease Zerk
• The Ultra-Fab Steel Mini Roller that you mentioned part # UF48-979022 does not have a grease zerk. However we do have the Ultra-Fab Jumbo Roller that is 2 inches wide by 3 inches tall that does have a grease zerk and it is part # UF48-979023.
  view full answer...


• Will the Extend-A-Shower, # EXT-5460, Fit a Tub Shower In a House
• The Extend-A-Shower, # EXT-5460, is 66 inches long overall and is made to fit 54 to 60 inch wide showers in RVs. A tub shower in a house is a little different but if the space is the same, within the length and width requirements, then it could work. It is also available in a chrome finish # EXT-5460C.
  view full answer...


• Will Ultra-Fab Steel Roller Fit Receiver # UF48-979020 on Class A Itasca Towing 2012 Honda CR-V
• As long as you are using a 2-inch trailer hitch, you should have no problem using the Ultra-Fab Steel Roller Fit Receiver # UF48-979020 while flat towing your 2012 Honda CR-V with your Class A Itasca. It can be used at the same time as other hitch-mounted accessories such as a ball mount or your Roadmaster Falcon Tow Bar # RM-525. This item attaches to your trailer hitch with a pin and clip # C21500. I have provided a video review of this product.
  view full answer...


• Will Ultra-Fab Hitch-Mounted Steel Rollers # UF48-979017 Fit on 2013 Palazzo 33.2 Foot Motor Home
• The Ultra-Fab Hitch-Mounted Steel Rollers # UF48-979017 can be used for your 2013 Palazzo 33.2 Foot motor home. They do not have a specific weight capacity since they are not intended to sustain weight for long periods of time. For larger Class A motor homes, you might want to go with the Ultra-Fab Skid Wheels # UF48-979012 due to their larger wheel diameter and the fact they extend down more than 7 inches.
  view full answer...


• Will Ultra-Fab Skid Wheels, # UF48-979013, Work on a 2013 Jayco Seismic 3914
• The Ultra-Fab Skid Wheels, # UF48-979013, are designed to be placed at the rear of an RV (or trailer) but I suppose you could put them anywhere on the RV or trailer where it may get too close to the ground. They are designed to bolt the frame using the included hardware. We have many skid wheel options that might work for you. I have included a link to the available options for you to view.
  view full answer...


• Ultra-Fab # UF48-979014 Hitch Mounted Skid Wheels for 31 Foot Motorhome
• You are correct, installing the Ultra-Fab # UF48-979014 skid wheels as you suggest would work just fine for you, since the wheels will extend below the skids you are speaking of. The skid wheels will do a great job of protecting your rear hitch or any other portion of the rear of your motorhome from dragging the ground and being damaged.
  view full answer...


• Overall Height of the 4 Inch and 6 Inch Ultra-Fab Class A Skid Wheels
• The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, # UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, # UF48-979013, 7-3/4 inches. I have attached a photo for you showing these measurements.
  view full answer...


• Skid Wheels for a 2004 Safari Cheetah 36PDD Class A Diesel Pusher Motor Home
• For the 2004 Safari Cheetah 36PDD Class A diesel pusher, the best option are the Ultra-Fab Skid Wheels for Class A RVs, # UF48-979013, that you have referenced. These are a bolt on application. The six inch diameter wheels are what Ultra-Fab recommends for Class As 34 feet and longer and should work well for you.
  view full answer...


• Skid Rollers for a 2013 Palazzo 33.2 Foot Long Motor Home with Rear Engine
• I spoke with my contact at Ultra-Fab about the Hitch Mounted Steel Rollers, # UF48-979017. Because these rollers are not meant to sustain weight for extended periods of time, they do not have a weight capacity. They can be used with your 2013 Palazzo motor home. For large Class A motor homes with rear engines, skid wheels # UF48-979013 might be a better choice because of the large wheel diameter and because the extend down over 7 inches.
  view full answer...


• Measurements of Stromberg Carlson RV Exterior Ladder # LA-401
• After going out to our warehouse and taking some measurements, I have found the 11 inch measurement you referenced is the distance from the center of one vertical tube to the center of the other. Also, I have provided a graphic showing measurements made to both the Stromberg Carlson RV Exterior Ladder # LA-401 you referenced as well as the Surco Universal Exterior RV Ladder # SP501L showing they have the same measurements.
  view full answer...


• Overall Height and Bar Diameter of RV Ladder # SP502L
• The overall height from where the ladder mounts on the bottom to the top curved portion that would be above the RV roof is 84-1/2 inches. So if you subtract the height of that curved part and measured from where it mounts on top to where it mounts on the bottom you would get 76-1/2 inches. The bar diameter is approximately 1 inch.
  view full answer...


• Motor Home Ladder for a 2011 Surveyor SV 302 34Feet Long
• All of the ladders that we carry are universal fit items so you have to go by the measurements as indicated on the product pages for the ladders. I have included a link to the ladders that we carry. You have to consult the trailer manufacturer to make sure the trailer can support a ladder with weight on it. The ladder that you referenced, # LA-401, has a 250 pound capacity.
  view full answer...


• How Wide is the Surco RV Bunk Ladder part # SP503B
• I spoke to my contact at Surco and she informed me that the Surco RV Bunk Ladder # SP503B has a width of 12 inches. Check out the picture I attached also.
  view full answer...


• Dimensions of the Surco Universal Exterior RV Ladder # SP502L
• The top hooks of the Surco Universal RV Ladder, # SP502L, that attach to the roof of an RV measure 10-1/2 inches from center to center and it measures approximately 7 inches from the vertical pole to the point on the hook just before the 90 degree bend. This ladder has an overall length of 84-1/2 inches, 12 inches between the vertical bars and 13 inches between each step on center. I have attached a photo showing the dimensions that I have listed for you.
  view full answer...


• Will the Stromberg Carlson Exterior Ladder Fit a 2010 Cougar Travel Trailer
• I have included a picture that shows the measurements of the ladder # LA-401. The ladder will set about 5 inches from the back of the trailer to the nearest parts of the ladder. At the top it is nearly twice as long. This is a universal fit application so you have to go by the measurements to determine if it is a fit. We have other universal fit ladders and I have linked them for you.
  view full answer...


• Recommendations For Skid Rollers on 39 Foot Forest River 5th Wheel
• I would recommend the Ultra-Fab Skid Wheels, part # UF48-979013, for your 39 foot Forest River 5th Wheel. These larger 6-inch diameter wheels will bolt onto the frame of your 5th Wheel to help prevent the tail from dragging. The longer the RV/5th Wheel, and the greater the distance between the rear of the RV/5th Wheel and the back axle, the greater the forces the skid wheels will have to deal with. This is why the larger, stronger skid wheel like those used on the Ultra-Fab # UF48-979013 are
  view full answer...


• Availability of Exterior Rear Ladder To Fit a 1999 Georgia Boy Cruise Master
• I have available three choices for an RV exterior roof ladder. The Stromberg Carlson RV Exterior Ladder, part # LA-401, is a universal ladder that will fit RVs with either a contoured or a straight rear wall. It is 99-1/2 inches tall, can be customized for anything shorter than 99-1/2 inches. It is 13 inches wide and the distance between the rungs is 12 inches. The stand-offs can be positioned anywhere along the ladder for additional strength. The other two choices are made by Surco and
  view full answer...


• Availability of Replacement Mounting Hardware for Stromberg Carlson RV Bunk Ladder
• A replacement hardware kit that includes brackets is indeed available for the Stromberg Carlson Bunk Ladder as part # 2460.
  view full answer...


• Recommended Skid Wheels For 36 Foot Tuscany Motorhome
• The longer the RV, and the greater the distance between the rear of the RV and the back axle, the greater the forces the skid wheels will have to deal with. This is why the larger, stronger skid wheel those used on the Ultra-Fab # UF48-979013 are recommended for RVs greater than 34 feet in length. The smaller # UF48-979015 would probably work, but you would get more life out of the larger skid wheels I recommended.
  view full answer...


• Replacement Rear Ladder Recommendation for a 2000 Monaco Windsor
• The Stromberg Carlson RV Exterior Ladder, # LA-401, is considered a universal fit item. It can be used with or without the hinges depending on angle or slope of the rear wall of the trailer or RV. The length is a maximum of 75 inches and can be cut to the proper length. If you need more length, we have an 84-1/2 inch model from Surco, # SP502L and a 97 inch long model also from Surco, # SP501L. Custom fit ladders are not available for individual trailer and RV models from the manufacturers
  view full answer...


• Using Ultra Fab Hitch Mounted Skid Wheels on Slide-Out Bike Rack Installed on Travel Trailer
• You would not want to use a skid wheel on anything that would extend off of the rear of your travel trailer. The skid wheels are intended to be installed on the crossbar of a receiver hitch, and would prevent the receiver from dragging on the ground when driving over speed bumps or entering driveways. Using the wheels on a bike rack will actually reduce the ground clearance at the back of the trailer, and would cause the rack to bend, as it is not an integral part of the trailer like the rece
  view full answer...


• Hitch Mounted Skid Wheel Recommendation for a 3-1/2 inch Square Frame
• You could use Ultra-Fab Hitch Mounted Skid Wheels # UF48-979014 on your hitch bar that is 3-1/2 inches by 3-1/2 inches. You will need to supply longer bolts to make it work, you will need to take a trip to the hardware store to get nuts and bolts that are an inch longer than what is supplied and you should be good.
  view full answer...


• Will the Ultra-Fab Steel Roller, # UF48-979020 Fit a Curt Trailer Hitch on a 2011 Toyota Sienna
• The Ultra-Fab Steel Roller, # UF48-979020, is designed to fit Class III or higher hitches with a 2 inch receiver. However, in this case the safety chain loops on the Curt hitch for the 2011 Toyota Sienna will interfere with installation. I have tested the Roadmaster Rollaway, # RM-050, on a Curt hitch before and it is compatible. It also fits a Class III or higher hitch with a 2 inch receiver and has a 5/8 inch diameter hitch pin hole. You could use a bike rack with it.
  view full answer...


• What is the Width of the Ultra-Fab Steel Roller for RVs
• The inside width of the Ultra-Fab Steel Roller for RVs, # UF48-979020, is 2-1/2 inches, the standard outside width of a 2 inch trailer hitch receiver tube. From the center of the hole in the bracket to the edge of the bracket is approximately 1 inch. The hole accepts a 5/8 inch diameter hitch pin.
  view full answer...