Expert Answers about Locks,Hitch Accessories

• Hitch Lock for a Thule Vertex Bike Rack and Curt Trailer Hitch
• The Thule Vertex uses a threaded hitch pin to provide anti-rattle for the bike rack. Because of the threads, you will not be able to use a regular hitch pin. However, you can use Thule Snug Tite lock and anti-rattle device # THSTL2. This lock is specifically made to fit Thule products like your Vertex. It will also be compatible with Curt trailer hitch # C13105. I have included a link to a video review for you.
  view full answer...


• Replacement Cable for Swagman Anti-Rattle Hitch Lock and Cable for Bike Racks Part # S64030
• The Swagman Anti-Rattle Hitch Lock and Cable for Bike Racks, part # S64030, includes a special washer that fits into one of the loops on the ends of the cable. This washer prevents that end of the cable from being slipped over the lock mechanism. We do offer other stand-alone lock cables that are generally similar, such as the Master Lock # 61DAT, but they do not have the washer in place on the loop. Without this special washer in place it might be possible to remove the cable by slipping it
  view full answer...


• Fit of Softride Locking Anti-Rattle Hitch Pin # SR25219 on Extra Wide Receiver Tube of 2012 Tacoma
• Per my contact at Softride, their stainless steel locking anti-rattle hitch pin you referred to, part # SR25219 was lengthened about 1-1/2 years ago so that it will be compatible with the extra width of the OEM receiver tube on your 2012 Tacoma. The anti-rattle hitch pin would be a great choice for you as long as the shank of the ball mount or accessory you would use it with is hollow (most are).
  view full answer...


• Will the Softride Hitch Lock # SR25056 Fit a 1-1/4 Inch Softride Bike Rack
• The previous version of the Softride hitch lock for bike racks # SR25056 was for 2 inch hitches/bike racks only. They have since updated the lock and it is now listed as a fit for 1-1/4 and 2 inch hitches and bike racks from Softride. The lock includes threaded pins for either size shank.
  view full answer...


• Does Dead Bolt Trailer Hitch Lock Part # 7683 Fit a Class ll 2-Inch Trailer Hitch Receiver
• Dead Bolt Trailer Hitch Lock Part # 7683 uses a 5/8-inch pin to lock your ball mount or hitch-mounted accessory to your trailer hitch. This is intended for class III and class IV receivers. Typically class II receivers have a 1-1/4-inch opening and use a 1/2-inch diameter hitch pin. Once you confirm your receiver size (please refer to the included article) you can select either a 1/2-inch diameter hitch lock, such as part # 40106 or # 5200 for a 1-1/4-inch receiver, or if a 2-inch receiver
  view full answer...


• Will HitchMate Threaded Trailer Hitch Receiver Lock Fit a Thule T2 Bike Rack
• Thule uses a propriety bolt pattern on their products. So the Hitchmate threaded trailer hitch receiver lock # HE6001 will not be compatible with the Thule T2 # TH916XTR-918XTR. However we do offer a Thule Snug Tite hitch lock and anti-rattle device that may work for you. The Thule Snug Tite hitch lock and anti-rattle device part # THSTL2 is a replacement lock system that is compatible with your 2 inch receiver hitch. I have included a video demonstrating the assembly of this Thule Snug Tit
  view full answer...


• Replacement Locking Hitch Pin for Subaru Bicycle Rack Made by Yakima
• Yakima did make the Subaru-branded bike rack but they do not offer any replacement parts directly; these proprietary parts can only be purchased from Subaru. Your Forester could be equipped with either a 1-1/4-inch or a 2-inch hitch receiver. The diameter of the hitch pin will be 1/2-inch for 1-1/4-inch hitches or 5/8-inch for 2-inch hitches. You can measure the size of the receiver opening on your hitch (or the hitch pin hole itself) to determine which size pin you need. If your hitch use
  view full answer...


• Can the Bulldog Locking Hitch Pin # BD580402 be Keyed to Match Key # LB011
• I spoke with my contact at Bulldog and she told me that the Bulldog Trailer Hitch Lock, # BD580402, could not be keyed to match key number LB011. This lock is not available keyed alike. If you would like hitch locks that can be keyed alike and that can be keyed alike in the future, I recommend looking at the Deadbolt Trailer Hitch Receiver Lock, # 40107. This lock also uses a solid stainless steel pin and works with 2 inch Class III and Class IV trailer hitches.
  view full answer...


• Will Locking Anti-Rattle Hitch Pin S64029 Fit the Swagman G2 Platform-Style Bike Rack S64680
• Yes, the # S64029 lock is designed for the Swagman bike racks that either have a 1-1/4 inch shank or that can be adapted for 1-1/4 inch or 2 inch hitches, so it will fit your G2 bike rack # S64680. I would recommend double checking the weight of the bikes, as an overload on the rack could possibly be the reason you have been having issues with the hitch pin. The # S64680 bike rack is rated to hold up to 90lbs. I am including links to review videos for both the lock and the bike rack for y
  view full answer...


• Locking Hitch Pin Recommendation for a Softride Element Parallelogram Bike Rack
• Since the Softride Element Parallelogram Tilting 4 Bike Rack # SR26248 you referenced has a threaded shank you will want to use a Anti-Rattle Hitch Lock and Bolt for 2 inch Softride Hitch Racks # SR25056. The Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin # SR25219 that you referenced is designed to work on accessories with hollow shanks and would not work for your rack.
  view full answer...


• Does Bulldog Trailer Hitch Lock for 2" Hitches, Part # BD580402, Affect Towing Weight Rating
• The Bulldog Trailer Hitch Lock for 2" Hitches, Part # BD580402, will not affect the gross towing weight capacity of your Class IV hitch receiver. (Typically all hitch pins are rated well in excess of their actual load requirements.) Since this product is constructed of solid stainless steel it is actually stronger than a standard 5/8-inch diameter pin. The inside pin length is 2-1/2 inches making for an easy fit in 2-inch receivers. I have included a link to a product review video for this i
  view full answer...


• Will the Yakima LockUp Hitch Lock and Cable Work with Rhode Gear Hitch Mounted Bike Racks
• The Yakima LockUp Hitch Lock and Cable, # Y07238, will work with the Rhode Gear hitch mounted bike racks. Yakima was the manufacturer of Rhode Gear bike racks, but they are stopping the Rhode Gear line and replacing it with the Prorack line. If you were looking to purchase the Rhode Gear Highway 2 Bike Rack, # RG8015220, then you will be interested in the Prorack 2 Bike Rack, # PR8062403.
  view full answer...


• Will Trailer Hitch Receiver Lock # 40107 Fit a Factory 2 Inch Trailer Hitch on a 2012 Dodge Durango
• Some factory 2 inch trailer hitches like on HD Chevy/GMC trucks and some import trucks have a larger outside width than regular 2 inch receivers. The span on the Trailer Hitch Receiver Lock, # 40107, is 2-5/8 inches. The average outside width of a 2 inch receiver is 2-1/2 inches so this lock would fit flush on the average 2 inch receiver. For the thicker 2 inch OEM hitches you could use # RH5-XL which has a span of 3-5/8 inches.
  view full answer...


• Locking Hitch Pin Recommendation for the Thule Vertex Bike Rack
• I do have a threaded, locking hitch pin for your Thule Vertex bike rack, but the Heininger Threaded Hitch Pin, # HE6033, will not work with the Vertex bike rack because the threaded portion of the Heininger hitch pin is too large to fit in the hitch pin hole of the Vertex bike rack. I pulled the Heininger hitch pin from my warehouse to test it with the Vertex bike rack and verified that they were not compatible. Instead, you will want the Thule Snug Tite Hitch Lock, # THSTL2. This hitch pin
  view full answer...


• Trailer Hitch Pin Lock Fit for a Trailer Hitch on a 2013 Toyota Land Cruiser
• The Deadbolt Trailer Hitch Receiver Lock, # RH5-XL, was designed to work with both 2 inch x 2 inch and 2-1/2 inch x 2-1/2 inch trailer hitch receivers so it should work well with the trailer hitch on your 2013 Toyota Land Cruiser. This hitch pin lock is a universal lock that was designed to fit most trailer hitches. If you want to verify that this lock will fit your hitch, there are two important measurements that you will want to take. First you will want to know the outside width of your re
  view full answer...


• Installing a Different lock in Yakima HitchLock for Yakima Hitch Mounted Bike Racks
• What you can do is add lock core # Y8771-A144 and put in place of the lock that comes in # Y07235. You will also need the change key # Y8007835 to be able to remove and replace the lock core. The Yakima HitchLock, # Y07235 can not be ordered with a specific lock in it so changing it out is the best option.
  view full answer...


• Availability of Hitch Lock and Cable To Lock Hitch and Bikes on Yakima DoubleDown Bike Rack
• To lock your bikes to your Yakima DoubleDown bike rack and to lock the bike rack to the hitch I would recommend the Yakima DeadLock Hitch Lock and Cable, part # Y02411. This part will attach to your existing Yakima hitch bolt to lock the bike rack to the hitch and includes an integrated cable that installs in the bike rack arm and secures the last bike to the rack so none of the bikes can be removed from the rack. The locking cores are keyed alike and can be changed out if needed to match other
  view full answer...


• Will Master Lock Trailer Hitch Lock # 1469DAT Fit 2007 Toyota Tundra With Factory Tow Package
• The Master Lock Stainless Steel Trailer Hitch Lock, part # 1469DAT, is an oversize lock that is designed to work on the Toyota Tundras with the HD tow package. It has an inside pin length of 3-1/4 inches. Another popular lock that will work on the Tundra is the Deadbolt Extra Long Hitch lock, part # RH5-XL. This lock has an inside pin length of 3-5/8 inches. Both of these locks will work on your 2007 Toyota Tundra with Factory Tow Package.
  view full answer...


• Will Trailer Hitch Receiver Lock # 7682 Fit a 2013 Land Rover Evoque with 1-1/4 Inch Trailer Hitch
• Since the factory hitch for the Evoque is a 1-1/4 inch Class I or II the trailer hitch receiver lock # 7682 will fit. Hitches that are 1-1/4 inches have a 1/2 inch diameter pin hole which is what this pin fits. The inside span is 1-5/8 inches long and the overall length is 5 inches. With these measurements you can check the space available around the outside of the receiver to ensure fit. I have linked a video review of this lock for you.
  view full answer...


• Recommendation for Making the Channel Style Adjustable Ballmount Lockable
• The best recommendation I can give you would be to get a Curt Lock Set for Adjustable Channel-Style Mounts # C23556. These locks are rated to handle the weight and are lockable to act as a theft-deterrent. Dimensionally the Trailer Hitch Receiver Lock # RH5-XL that you referenced might fit to hold the ball mount platform in the Channel Style Adjustable Ballmount # C45900, but since it is not rated to handle the weight it would see in that position I cannot safely recommend you attempt to use
  view full answer...


• What is the Pin Diameter for Master Lock Trailer Hitch Receiver Lock, # 1479DAT
• The Master Lock Trailer Hitch Receiver Lock, # 1479DAT, has a pin diameter of 5/8 inches. On a 2 inch trailer hitch the pin hole is going to take a 5/8 inch diameter. On a 1-1/4 inch hitch it will use a 1/2 inch diameter pin. I have included a link to a video review of this lock for you.
  view full answer...


• Will the Master Lock EZ Access Swivel Head Lock Fit on a 2010 Ford Explorer 2 Inch Receiver
• Yes, the Master Lock EZ Access Swivel Head Receiver Lock, # 2854DAT, will work with the 2 inch receiver on your 2010 Ford Explorer. This lock is designed to fit all 2 inch trailer hitches and is also designed to work with OEM trailer hitches that have limited clearance for a hitch pin because the hitch pin hole sits close to the hitch crosstube.
  view full answer...


• Will the SportRack Lock A30901LHP Work on Thule Racks
• The only lock that will work with Thule racks is the Thule Snug-Tite Lock, item # THSTL2. The threading and bolt size of the Thule racks are very specific, and only work with Thule accessories.The SportRack lock, item # A30901LHP, will not work with any Thule racks.
  view full answer...


• Lock on Anti-Rattle Device and Lock # 63232 Will Not Unlock
• On the Anti-Rattle Device and Lock, # 63232, make sure that the lock itself is not turning while you are turning the key. If the key is not inserted all of the way it will not engage properly and it cannot be turned. If you are able to put the key in all the way and it still will not turn some spray lubricant might loosen things up. A spray of WD-40 might be enough to get things moving again after letting it soak. If the key turns freely (and the lock itself is stationary) then this indic
  view full answer...


• Trailer Hitch Lock Recommendation for 2009 Toyota Tacoma
• We have seen this issue before with Toyota Tacomas and to help owners such as you with your 2009 Toyota Tacoma, Deadbolt created an extra long trailer hitch receiver lock # RH5-XL. It is 1/2 inch longer than the hitch receiver lock # 7683 you referenced and fits 2 inch and 2-1/2 inch Class III-V hitches. I have included a link to a video review of this product. This lock has an inside width of 3-5/8 inches, an overall length of 6-7/8 inches, and a 5/8 inch diameter pin.
  view full answer...


• Recommended Hitch Lock for Factory Hitch on 2012 Toyota Tacoma
• For your 2012 Toyota Tacoma, we have seen that the DeadBolt Hitch Receiver Lock # 7683 you referenced is not wide enough for the factory-installed hitch receiver with its overall width of more than 2-5/8 inches. I recommend the DeadBolt Extra Long Hitch Receiver Lock # RH5-XL with an inside width of 3-5/8 inches. The # RH5-XL fits all 2 inch and 2-1/2 inch trailer hitches (Class III-V). I have included a link to a video review of this product. This product has a covered key slot that prevents
  view full answer...


• Composition of Master Lock Key Safe and Trailer Hitch Receiver Lock # 1467DAT
• After speaking with my contact at Master Lock, I have discovered the body of the Master Lock Key Safe and Trailer Hitch Receiver Lock # 1467DAT is made of stainless steel with a water-resistant lid that flips down to protect and conceal the combination lock. The lock itself is made of a combination of steel and chrome. I have linked to the instructions on how to properly use this product and how to set the combination as well as a video showing the item more in depth. The cylinder that attach
  view full answer...


• Will the Extra Long Trailer Hitch Receiver Lock # RH5-XL Fit a 2005 Toyota Tacoma 2 Inch Hitch
• Based on the measurements you have provided if you use Trailer Hitch Receiver Lock # RH5-XL you will be able to lock it. The inside pin length on this pin is 3-5/8 inches, 3/8 of an inch longer than the pin you are using now. That should allow the pin to lock properly. I have included a link to a video review of this lock for you.
  view full answer...


• Will the DeadBolt Stainless Receiver Lock Fit in the Factory Hitch on Ford and Jeep Vehicles
• The DeadBolt Stainless Receiver Lock, # 40107, should work just fine on your Ford and Jeep vehicles, but you should measure the Outside width of the hitch receiver at the hitch pin hole just to be sure. As long as this measurement is 2-5/8 inches or less this hitch lock will work for you. We have found that this lock will not work on newer Toyota Tundra and Tacoma Vehicles that have thick walled 2 inch hitches and that the 2010and newer GMC Chevy HD truck with 2-1/2 inch hitches have the same
  view full answer...


• Looking Hitch Pin Recommendation for a 2012 Ford F-150 with 2-1/2 Inch Trailer Hitch Receiver Span
• It will be a snug fit so if the outside of the receiver on your truck is 2-1/2 inches locking pin # BD580402 should fit. On each end of the pin, on the insides that face the inner span, it is tapered so there will be just enough wiggle room. It might be safer to go with span that is just a little wider like # 7683 that has a 2-5/8 inch span. Then there is an extra long span on # RH5-XL that measures 3-5/8 inches inside width. If 3-5/8 is too long and you do not want to chance a 2-5/8, then
  view full answer...


• Availability of Replacement Bolt For Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2
• The Thule Snug Tite Hitch Lock and Anti-Rattle Device, part # THSTL2, you have referenced, is the complete bolt and lock that works on both 1-1/4 inch and 2-inch Thule hitch mounted racks. The product page for this part will list the many Thule hitch bike racks that it will fit. We also sell the the Thule Replacement Threaded Pin, part # 853-5917, which is just the threaded bolt portion of the lock. The bolt uses a 12mm thread which is unique to Thule and it has an overall length of 4-3/4 inc
  view full answer...


• Anti-Rattle Hitch Pin Recommendation for a Yakima Bike Rack with a 2 Inch Shank
• You can use the Softride Locking, Anti-Rattle Hitch Pin, # SR25219, as long as the shank of your Yakima bike rack is hollow. The block will insert into the shank of the bike rack and the threaded pin will thread through and lock. If your Yakima bike rack has a threaded insert in the shank, then it should have come with a threaded pin. If this is the case, then let me know the model of your bike rack and I can see if we have a replacement pin for your bike rack. If the threaded insert is remo
  view full answer...


• Will Locking Hitch Pin # 7682 Fit Factory 1-1/4 Inch Trailer Hitch Receiver on a 2002 Ford Explorer
• The span of lock # 7682 is 1-5/8 inches and the overall length is 5 inches. Measure your receiver from outside pin hole to outside pin hole to make sure the 1-5/8 inch span is long enough. If you need a longer lock take a look at # 1472DAT. It has a span of 2-3/4 inches. I have linked videos of each.
  view full answer...


• What Size Wrench is Needed to Tighten Locking Anti-Rattle, Threaded Hitch Pin, # S64029
• The bolt head on the Locking Anti-Rattle, Threaded Hitch Pin, # S64029, is 22mm. You will need a 22 millimeter wrench or socket (a socket and ratchet would be easiest to use) to tighten the bolt down.
  view full answer...


• Bike Adapter Bar for a Womens Frame Bike on a Swagman Trailhead Bike Rack on a 2010 Toyota Prius
• Bike rack manufacturers have come up with a solution for womens bike frames and alternative bike frames that do not fit or sit level on a bike rack. You can use an adapter bar, # 64005. I have included a link to a video that shows how the adapter works.
  view full answer...


• Locking Hitch Pin Recommendation for a Carpod Cargo Carrier on a 2007 Toyota 4Runner Sport
• The Softride Locking, Anti-Rattle Hitch Pin, # SR25219, is an excellent choice to secure a Carpod basket to your 2007 Toyota 4Runner Sport Edition. This hitch pin will not only keep your basket secure, but it will keep the shank of the cargo basket tight against the receiver tube with the anti-rattle device. We carry two Carpod baskets and they are the Carpod Walled, Folding Cargo Carrier, # M2205, and the Walled, Fixed Cargo Carrier, # M2200. I would recommend using the Folding Cargo Carrie
  view full answer...


• Trailer Hitch Receiver Lock Recommendation for a 1997 Ford F-150
• The trailer hitch lock # 5201 is designed to fit in a 5/8 inch diameter hitch pin hole found on a Class III, IV, or V trailer hitch. The span or part that goes through the receiver and accessory is 3-1/2 inches long, overall it is 7-1/4 inches long so it is a fairly long lock. I personally like the flush mount type from Deadbolt, # 7683. The span is 2-5/8 inches so the 2 ends are flush with the receiver. This lock has a rubber cap on the lock end to protect it from the elements. I have inclu
  view full answer...


• Availability of Keyed-Alike Diversi-Tech Hitch Lock
• The Chrome plated, quarter turn hitch lock, part #DT30005, is not available keyed alike. We do have a selection of hitch locks that can be ordered keyed alike. I have provide a link to these below, and they can be ordered in any quantity needed.
  view full answer...


• Will the Trailer Hitch Receiver Lock # 1480DAT Fit a Class III Hitch on a 2012 Jeep Grand Cherokee
• The Master Lock hitch pin lock # 1480DAT should not interfere with the trailer connector on your 2010 Jeep Grand Cherokee. The blue end and the lock end only stick out 1-1/2 inches each on either side so if the connector is 3 inches away from the receiver you will still have 1-1/2 inches of clearance. You will want to have the lock end on the side of the receiver closest to the trailer connector so you can pull the pin out the other side.
  view full answer...


• Will the Deadbolt Trailer Hitch Receiver Lock Work With a Cargo Carrier on a 2012 Honda CR-V
• Yes, the Deadbolt Trailer Hitch Receiver Lock, # 7682, is an excellent choice to secure your Surco cargo carrier to your trailer hitch on your 2012 Honda CR-V. This lock will feed through the hitch pin hole on your trailer hitch just like your pin and clip and the locking end will ensure your cargo carrier cannot be removed while you are away.
  view full answer...


• Is the Kuat Bike Rack Hitch Lock # KUATLOCK the Only Hitch Pin Lock That Works on Kuat Beta Rack
• Yes, most bike rack manufacturers will use an exclusive size and thread on the hitch lock for their own brand of bike racks. So, the Kuat bike racks will only be able to use the # KUATLOCK for a hitch pin lock. We have not run into any problems with the Kuat hitch lock not fitting properly on a Kuat hitch bike rack. The review you mentioned does not say if he was using the Kuat hitch lock on a Kuat bike rack. If he was using it on a different brand of bike rack that used a 1/2 inch hitch lock
  view full answer...


• Can the Master Lock Key Safe and Receiver Lock be Used on a 1-1/4 Inch Hitch on a 2012 Jeep Patriot
• The Key Safe and Trailer Hitch Receiver Lock, # 1467DAT, that you referenced comes with a hitch pin for 2 inch receivers. The diameter of this hitch pin would not fit in the hitch pin hole on your trailer hitch. I spoke with my contact at Master Lock and she stated that you could use the key safe that comes in this kit, however, you would also want to pick up the 1-1/4 Inch Receiver Lock, # 1472DAT. At this time the key safe and the 1-1/4 inch locking hitch pin do not come in a kit togeth
  view full answer...


• Does the Deadbolt Hitch Lock Fit the Thule Vertex 5 Bike Rack
• The Thule Vertex 5 Bike Rack, # TH9030, has a threaded hitch pin hole, so the Deadbolt Hitch Lock, # 7683, will not work with this bike rack. Instead, you will want to use the Thule Snug Tite Hitch Lock and Anti-Rattle Device, # THSTL2. Thule specifically threads the hitch pin holes in their bike racks to fit their hitch pins. The Snug Tite lock will provide both the lock that you are looking for and and anti-rattle feature to keep the bike rack from moving in the trailer hitch receiver.
  view full answer...


• Will Anti-Rattle and Lock # 63232 Work with Dee Zee Trailer Hitch Mount Cargo Carrier # DZ760083
• In order to use the Anti-rattle device and lock, # 63232, the accessory would have to have a hallow shank. The DeeZee cargo carrier, # DZ760083, does have a hallow shank so you can use them together. I have included a link to a video review of the anti-rattle device for you.
  view full answer...


• The SportRack Anti-Rattle Bike Rack Hitch Lock # A30901LHP Will Not Fit Thule Bike Racks
• The only lock that works with Thule bike racks is the Snug-Tite lock # THSTL2. Each manufacturer that has a threaded locking hitch pin has it uniquely threaded so that it will only work with their racks. I have included a link to a video review of the Snug-Tite lock.
  view full answer...


• Using Yakima LockUp Hitch and Cable Lock # Y07238
• Once the rack is locked into the receiver, the end of the cable with the loop is passed around the shank of the rack near the receiver. Then the end of the cable with the locking tip is passed through the loop, and the cable is pulled snug. The remainder of the cable passes through the bike frames and the end of the cable with the metal tip comes around to connect to the lock threaded onto the cable. The process is very easy in practice, but difficult to describe in words. Take a look at the
  view full answer...


• Removing Diversi-Tech Hitch Lock # DT31005 Without Key
• Your best solution would either be to cut off the lock or drill out the lock cylinder. If there is any wiggle room on either side of the receiver that would allow you access to the smaller diameter hitch pin portion of the lock, using a very thin cut-off wheel on an angle grinder would cut through the lock pretty easily. If you go this route, be sure to wear eye protection, as the sparks will be flying. If cutting is not an option, you can drill out the lock cylinder. You will need some d
  view full answer...


• Anti-Rattle Device Recommendation for Use with a 2 Inch to 1-1/4 Reducer Trailer Hitch Adapter
• If you just need a locking hitch pin, you can use any pin that is a fit for a 2 inch hitch, like # 40107. If you want anti-rattle capabilities, the shank in the adpater that fits into the 2 inch trailer hitch would have to be hollow to use # 63232. Another option is to use something like the Quiet Hitch anti-rattle device, # RM-061, which bolts on and holds the accessory still in the receiver.
  view full answer...


• Long Hitch Lock Recommendation for a Curt Multi-Ball Adjustable Ball Mount # D900
• The longest locking hitch pin with a 5/8 inch diameter that we have will have a span of 3-7/8 inches like # BX88212 that you have referenced. A similar lock that is slightly shorter at 3-5/8 inches is # RH5-XL. Take a look at the video demo of this lock I have linked for you. Because of how the Curt adjustable ball mount # D900 is designed, you would need 3 locks to secure all parts of the ball mount: 1 at the hitch, 1 at the adjustable part, and 1 where the ball portion attaches.
  view full answer...


• Trailer Hitch Receiver Lock Recommendations For a 2007 Ford F-250 With Weight Distribution System
• The Master Lock Trailer Lock, # 1480DAT, and the Master Lock EZ Access Lock, # 2854DAT, are very similar locks that both utilize the swivel head for easy access to the lock. The receiver lock # 1480DAT has received better reviews from our customers and also comes with a keyed alike feature if you plan on purchasing multiple locks. Both locks would do the job for you, but I would strongly recommend the Deadbolt Trailer Hitch Receiver Lock, # 40107. This is one of our most popular receiver loc
  view full answer...


• How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike
• For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the DeadBolt brand of locks. They offer the DeadBolt Stainless Steel 2 Inch Hitch Receiver Lock, part # 40107, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches, or the DeadBolt Stainless Steel 1-1/4 Inch Hitch Receiver Lock, part # 40106, that fits most 1-1/4 inch hitch receivers, and has an inside width of 1-5/8 inches. For coupler locks they offer the De
  view full answer...


• Swagman Trailer Hitch Mounted Bike Rack Locks for a 2008 Ford F-350 with 2-1/2 Inch Receiver
• The Swagman lock, # S64027 or # S64030, will be long enough at a span of 3-7/16 inches. This lock is for Swagman bike racks that only fit in 2 inch receivers. If you have a Swagman rack that fits 1-1/4 or 2 inch receivers, the correct lock is # S64031 or # S64029. However, the span on this lock is 2-5/8 inches and will not be long enough for a 2-1/2 inch receiver. If you will be using the bike rack I had recommended earlier, # S64910-2, it only fits 2 inch hitches so it would use Swagman lock
  view full answer...


• Can Multiple Master Lock Trailer Hitch Receiver Locks # 1480DAT be Keyed Alike
• You can get multiple locks of part # 1480DAT keyed alike. What you will need to do is locate the box next to the picture that says keyed alike or keyed unique. Change it to read keyed alike. Below that select how many you want in the quantity box and that number of locks will be keyed alike and sent out.
  view full answer...


• Will Rapid Hitch Lock and Adjustment Pin Lock Set # AM3492 Work On Fold-Away Coupler Hinge Kit
• The Rapid Hitch Lock and Adjustment Pin Lock Set, part # AM3492, is designed as a hitch pin lock set for Rapid Hitch adjustable ball mount systems. The two locks are designed for 2 inch and 2-1/2 inch trailer hitches. One lock is designed to lock the ball mount shank to the hitch and the other lock is used to lock the adjustable ball housing to the shank. To determine if the locks will work on your fold-away coupler hinge kit you will need to measure the diameter of your pin on your hinge kit
  view full answer...


• What is the Correct Anti-Rattle Locking Hitch Pin for a Thule Roadway Trailer Hitch Mount Bike Rack
• Thule bike racks are uniquely threaded so that you can only use their locking hitch pins and anti-rattle devices. You would need to use the Snug Tite lock and anti-rattle device, # THSTL2. I have included a link to a video review of the lock for you to view.
  view full answer...


• Will DeadBolt 1-1/4 Inch Hitch Lock # 40106 Fit the Factory Hitch on a 2012 Ford Escape
• The factory trailer hitch on a 2012 Ford Escape is a Class II 1-1/4 inch hitch. The DeadBolt 1-1/4 Inch Hitch Lock, part # 40106, that you have referenced is designed for 1-1/4 inch hitches, but there have been some factory 1-1/4 inch hitches that it has not worked on because of the thickness of the steel surrounding the factory hitch receiver opening. I would recommend that you measure the overall outside width of your trailer hitch where the hitch pin goes through your hitch and if that m
  view full answer...


• Are the Blue Ox Base Plate and Receiver Locks # BX88177 Keyed Alike
• The Blue Ox Base-Plate and Receiver Locks you mentioned, part # BX88177 are indeed keyed alike. If all you are needing is two hitch locks for a Class III receiver, the Dead Bolt Stainless Steel Receiver Lock, part # 40107 is available keyed alike. On the product page (follow link) simply select the Keyed Alike option.
  view full answer...


• Locking Hitch Pin Needed for a 2012 Chevrolet Silverado with Extra Wide 2-1/2 inch Receiver
• The extra bracing on the sides of the receiver tube on the OEM hitch on your 2012 Silverado 2500 HD causes most standard hitch locks to be too short to work. We found this out early on and inquired with our hitch lock manufacturers about a locking hitch pin that would work and Deadbolt came through for us with the Extra Long Hitch Receiver Lock, # RH5XL, which has a 3-5/8 inch span. I edited a photo showing the span measurement I took for you to see. At this time this is the only locking h
  view full answer...


• Will Heininger Advantage Threaded Trailer Hitch Receiver Lock Fit a Class I or II Cargo Carrier
• The Advantage Threaded Trailer Hitch Receiver Lock, # HE6033, can be used on a cargo carrier with a 1/2 inch hitch pin hole. However, if the shank of the carrier is not threaded the same as the bolt, it will not fit. Also, if the shank is not threaded at all on the carrier, the lock will only work as a lock, not as an anti-rattle device. What I recommend is to use a lock like # 5200 with anti-rattle device # 93347. This will be the best option for adding a lock and an anti-rattle device. A lo
  view full answer...


• Will Heininger Advantage Threaded Trailer Hitch Receiver Lock Fit a Class II Cargo Carrier
• You can use the Advantage Threaded Trailer Hitch Receiver Lock, # HE6033, on the cargo carrier, # 63155, but the shank in the cargo carrier is not threaded so the lock will not function as an anti-rattle device, just a lock. If you are just looking for a lock, I recommend # 7682. If you need an anti-rattle device for use with a regular hitch pin you can use # 93347. I have included a link to a video review of the 7682 lock for you.
  view full answer...


• Key Enters but Will Not Turn in the Trailer Hitch Receiver Lock # 7682
• Over time, if the locking mechanism of a lock has not been operated, it can get stuck or seize. This is especially true if any of the internal components have any corrosion on them. What I recommend is to spray in a liberal amount of a penetrate and lubricant like WD-40 or PB Blaster. Let it work for about 15 minutes and then insert the key and try again. It may take a little more force than normal to get it to free up. If it does not work the first time, do not despair. Spray more penetra
  view full answer...


• Can the Anti-Rattle Lock and Cable be Used Without the Cable on a 2012 Subaru Outback Wagon
• Yes, if you use the Anti-Rattle Hitch Lock, # S64030, without the security cable the anti-rattle lock will still secure the bike rack in the hitch and keep it from rattling.
  view full answer...


• Anti-Rattle Device Recommendation for a Factory Trailer Hitch on a 2012 Chevy Suburban
• Only certain trailer hitches are J-Pin compatible. The factory hitch on your new 2012 Chevy Suburban sounds like it is not a Draw-Tite J-Pin compatible hitch. You will not want to drill into the hitch because that could compromise the structural integrity of the hitch, make the capacity unknown, void the warranty, and make it unsafe to use. What I recommend is to use an anti-rattle device like the Blue Ox hitch immobilizer, # BX88224 or the Roadmaster quiet hitch, # RM-061. Either of these de
  view full answer...


• Locking Trailer Hitch Pin Recommendation for a 2 Inch Trailer Hitch with 1/2 Inch Diameter Hole
• Take a look at the Diversi-Tech Chrome-Plated Hitch Lock, # DT32005. This is a single pin that has a 3 inch usable span. It comes with an adapter sleeve so you can use it in a 1/2 inch hole or 5/8 inch hole. I have included a link to a video review of the lock for you. The locks you have referenced, # 2848DAT, should also work but they also come with a coupler lock that, unless you needed it, would not be necessary. And if you never needed the 2 inch receiver lock with a 5/8 diameter, it is
  view full answer...


• Trailer Hitch Pin Lock for a 2009 Ford Explorer with Little Space to Use a Lock
• I have not heard of this exact issue before on any vehicle. Certainly, you can use a hitch pin/lock in any orientation that works for you. The Master Lock EZ Access Lock, # 2854DAT, has a similar design with a swivel head that was specifically designed for hitches that have a hitch pin hole close to the hitch cross tubing.
  view full answer...


• Diversi-Tech Hitch Lock Recommendation for a 1-1/4 Inch Hitch
• For a lock for your 1-1/4 inch hitch I would recommend you get a Diversi-Tech Chrome-Plated Hitch Lock # DT32005. I attached a review video for you to check out also. The Blue Ox Base-Plate-to-Tow-Bar Lock # BX8859 that you referenced is designed to be used as a lock for base-plates to tow-bars. While it could possibly be used as a hitch lock, I would not recommend you use it as one since it has never been tested for that.
  view full answer...


• Availability of Keyed Alike Sets of Master Lock Receiver and Coupler Latch Lock Set Part # 1481DAT
• The Master Lock Hitch Receiver and Coupler Latch Lock Set, part # 1481DAT is not available keyed alike. Both locks in the set are keyed the same, but we are unable to obtains multiple sets that are keyed alike. If you are interested in multiple units of hitch and coupler lock combo that are available keyed alike, take a look at part # 7685. I apologize for any confusion.
  view full answer...


• What is the Anti-Rattle Device and Lock, # 63232 Made of and What is the Capacity
• The Anti-Rattle Device and Lock, # 63232, is made of chrome plated steel. It does not have an official capacity because it has a higher breaking point than a hitch or ball mount that would be used with it. I have included a link to a video showing how the lock works.
  view full answer...


• Will the Sportrack Locking Hitch Pin Fit on a Hollywood 1-1/4 Inch Shank 4 Bike Rack
• You are in luck, one of our co-workers happens to have a Hollywood bike rack for Class II hitches and I checked several of the hitch pins that we have available to see if they would work with bike rack. I found that the SportRack Anti-Rattle Bike Rack Hitch Lock, # A30901LHP, has the same thread size and pitch to work correctly with this brand of rack. I also found that the Yakima replacement hitch bolt and clip, # Y8890176, will also work with this rack and can be used with the Yakima HitchLock
  view full answer...


• Washer Placement When Using Swagman Locking Anti-Rattle, Threaded Hitch Pin for 2 Inch Bike Racks
• It sounds like you have put the washers on correctly. The one with a slit in it is probably the lock washer. It would go on the side with the threads. A lock washer is designed to help hold the bolt in place so it will not come loose. A flat washer on the other side will help prevent any scratches on the lock or hitch and disperse the tension from tightening down the bolt.
  view full answer...


• Replacement Locking Hitch Pin Lock for 2004 Yakima Trailer Hitch Mount Bike Racks
• The Yakima locks are designed to only work with Yakima components and I cannot guarantee that another brand would fit. If you do just need the lock part, you can use # Y07235. If you did need to replace the lock and cable, then you would use # Y02411, that you have referenced, but it will only work with the Bighorn and Kingpin racks made after 2004.
  view full answer...


• Will Heininger Threaded Hitch Lock Work With Rhode Gear Bike Carrier and Class I 1-1/4 Hitch
• I walked out to our warehouse and pulled the Heininger Advantage Threaded Hitch Lock, part # HE6033, and the Rhode Gear Highway 2 Bike Carrier, part # RG8015220. Yes, the Advantage Hitch Lock # HE6033 will work with the Rhode Gear Highway Bike Carrier and a 1-1/4 inch hitch, like the Hidden Hitch # 60218 on your Honda Fit. I shot a short video for you, which shows the parts together being mounted on a 1-1/4 inch hitch.
  view full answer...


• Will a Swagman Threaded Hitch Pin and Cable Lock Fit a Saris Bike Rack
• If the Saris bike rack does have a threaded hitch pin hole, then only a Saris threaded hitch pin will fit. Each company makes their threaded parts unique so only their parts are compatible with each other. If the Saris rack does not have a threaded hitch pin, you could most likely use the Trailer Hitch Receiver Lock with Integrated Cable, # 1470DAT. It will fit hitch pin hole diameters of 1/2 inches and 5/8 inches. I have included a link to a video review for you.
  view full answer...


• Locking Hitch Pin and Cable Lock Recommendation for a Thule Roadway Bike Rack
• No, the Trailer Hitch Receiver Lock with Integrated 8 foot Cable, # 1470DAT, will not work with Thule bike racks, because the Thule bike racks have a uniquely threaded shank for their specific Snug Tite Hitch Locks and Anti-Rattle Devices. For your Thule Parkway, # TH956, I would recommend going with the Snug Tite Hitch Lock, # THSTL2, and the DeadBolt 10 foot Long Cable Lock, # CAB-10, to secure the bike rack and then secure the bikes to the rack and safety chain loops on your trailer hitch.
  view full answer...


• Is Yakima LockUp Cable Lock Part # Y07238 Long Enough to Secure 4 Bikes to Yakima BigHorn Bike Rack
• At 10 feet, 2 inches long, the Yakima LockUp, part # Y07238 is long enough to secure 4 bikes to your BigHorn Bike Rack. Two locking cores ARE included with the LockUp. If you are using the Yakima Hitch Lock, part # Y07235, and would like additional cores so everything will be keyed alike, they are available as part # Y07204 for 4 cores, part # Y07206 for 6 cores or part # Y07208 for 8 cores. For installation details, click on the provided link.
  view full answer...


• Will Blue Ox Trailer Hitch Lock # BX88212 Fit 2-1/2 Inch Receiver On 2011 Chevrolet Silverado HD
• I walked out to our warehouse and pulled the Blue Ox Trailer Hitch Lock # BX88212. I measured the distance between the locks and it measured approximately 3-7/8 inches, so this lock will work with your 2-1/2 receiver. Another lock we have available for 2-1/2 receivers is the Trailer Hitch Receiver Lock, part # RH5-XL.
  view full answer...


• Will Master Lock Cable Lock #1470DAT Fit on SportRack Anti-Rattle Bike Rack Hitch Lock # A30901LHP
• The Master Lock Trailer Hitch Receiver Lock with Integrated 8 Foot Cable, part # 1470DAT, is made to slide onto a 1/2 inch or 5/8 inch pin diameter hitch pins. I went out to our warehouse and tried to install the Master Lock cable onto the SportRack lock bolt # A30901LHP. The cable will slide onto the SportRack bolt which is 7/16 inches in diameter and the length of the bolt from the inside of the hex head to the lock when locked is 3 inches. The length of the cable on the SportRack Hitch
  view full answer...


• Will Trailer Hitch Receiver Lock for 2-1/2 Inch Hitches Fit a 2011 GMC Sierra 2500HD
• We do not currently have a coupler/hitch lock set that is keyed alike. You would need the Trailer Hitch Receiver Lock, # RH5-XL, for the hitch on your 2011 GMC Sierra. The inside width at 3-5/8 inches is long enough to compensate for the thick steel used on the OEM hitch. For a coupler lock, we have a lot of options. I have included a link to the coupler lock main page for you. No matter what size you have or style lock you want, I am sure you will find something that will fit your needs.
  view full answer...


• Locking Hitch Pin Recommendations for a 2011 Ford F250
• We have a couple extra long hitch pins that you might be able to use. You will want to measure the hitch pin you have now that is 1/2 inch to short and pick one that is the right length. Check out the Locking Adjustment Pin for Rapid Hitch # AM3428. This hitch pin has an inner diameter of 4-1/4 inches. Or you could check out a Trailer Hitch Receiver Lock Extra Long # RH5-XL, this hitch pin has an inner diameter of 3-5/8 inches.
  view full answer...


• What Metal is the Trailer Hitch Receiver Lock by Dead Bolt Made Of
• This Trailer Hitch Receiver Lock # 40107 the you referenced is made of solid stainless steel to maximize rust resistance. I attached a review video of this product for you to check out also.
  view full answer...


• Replacement Hitch Pin Installation Problem for My XC2 # S64650 Bike Rack
• I have ran into this situation a couple of times. The hitch pin, # S64029, is the correct hitch pin for the Swagman XC, # S64650, bike rack. Sometimes manufacturing tolerances are not quite the same on the replacement hitch pin and you will need to use a wrench to slowly thread the hitch pin in and out a few times to get the threads to match up perfectly. Start by applying some oil, then threading the new hitch pin in until you feel resistance. Back the hitch pin out a bit and thread in agai
  view full answer...


• Will the Anti-Rattle, Threaded Hitch Pin # S64029 Work on the Swagman XTC-2 Bike Rack # 64670
• Yes, the Locking Anti-Rattle, Threaded Hitch Pin, # S64029, is the correct hitch pin for Swagman bike racks with 1-1/4 and 2 inch adaptable shanks, like your XTC-2 bike rack, # S64670. You could also use the Swagman Anti-Rattle Locking Hitch Pin and Cable, # S64031, with your bike rack. The addition of the cable is a great way to secure the bikes when unattended.
  view full answer...


• Anti-Rattle and Locking Device # S64650 Recommendation for a Swagman XC Rack # S64650
• You would want a Swagman Anti-Rattle Locking Hitch Pin and Cable # S64031 for your Swagman XC 2 Bike Carrier # S64650. This hitch lock and cable is designed for racks designed to work on either 1-1/4 inch or 2 inch hitches. The Swagman Anti-Rattle Locking Hitch Pin and Cable # S64030 that you referenced is only designed for Swagman racks that only install onto 2 inch receiver hitch openings and would not work for you.
  view full answer...


• Will The SportRack Hitch Lock # A30901LHP Fit Thule Parkway Hitch Bike Rack
• We do have a lock available that will work with the Thule Parkway hitch bike rack, but the SportRack Bike Rack Hitch Lock, part # A30901LHP, will not work with any Thule bike racks. You will want to use the Thule Snug Tite Hitch Lock, # THSTL2, which fits all of the Thule hitch bike racks, including the 1-1/4 and 2 inch Thule Parkway hitch bike racks. The thread and bolt size for Thule bike racks are specific to accept or work with Thule locks and accessories. Most bike rack manufacturers
  view full answer...


• Locking Hitch Pin for a Dealer Installed 1-1/4 Inch Trailer Hitch on a 2010 Subaru Outback
• What you will want to do is determine the width of the receiver where the lock will go. You can then compare that to the inside with or usable span dimensions listed on the hitch lock product pages. The Trailer Hitch Receiver Lock, # 5200, has an inside width of 3-1/8 inches. Another option is the Chrome-Plated Quarter-Turn Hitch Lock, # DT32005. It has a span of 3 inches. I think that either of these locks would fit the dealer installed hitch on your 2010 Subaru Outback, but I still recommen
  view full answer...


• Availability of Hitch Receiver Lock, Coupler Locks, and Cable Lock All Keyed Alike
• I would recommend to use the Dead Bolt brand of locks. They would have the Dead Bolt 10 Foot Long Cable Lock, part # CAB-10 which can be keyed alike and they also list a range of receiver locks and coupler locks that can be all keyed alike. I am including a link to a page that will list the different Dead Bolt receiver locks and coupler locks available. The Master Lock Trailer Hitch Receiver Lock with Integrated 8 Foot Cable, part # 1470DAT can not be keyed alike. I would recommend whe
  view full answer...


• What are the Thread Dimensions of the Anti-Rattle Device # 63232
• I spoke with my contact at Tow Ready and he informed me that the threads of the Anti-Rattle Device # 63232 that you referenced are 5/8 inch in diameter with 11 threads per inch UNC2A. I attached a review for this product for you to check out also.
  view full answer...


• Will Swagman Locking Hitch Pin and Cable # S64030 Fit a Swagman Original 4 Bike Rack # S64400
• Yes, the Swagman Anti-Rattle Locking Hitch Pin and Cable, # S64030, will fit the Swagman Original 4 Bike Rack, # S64400. The locking hitch pin is uniquely threaded to only work on Swagman 2 inch bike racks. And the bike rack weld nut inside the shank is uniquely threaded to only accept the Swagman threaded hitch pin for 2 inch bike racks.
  view full answer...


• Recommend Locking Hitch Pin For Kuat Beta Aluminum Bike Rack # B202-2
• For a locking hitch pin, I would recommend the Trailer Hitch Receiver Lock, part # 40107, which is the flush design lock that you mentioned. The lock you selected, Kuat Hitch Lock, part # KUATLOCK is designed for 1-1/4 inch receivers. I have linked all of the 2 inch receiver locks that we have available that should work with the Kuat Beta Aluminum Bike Rack # B202-2. To make sure that the Kuat Beta will fit your vehicle, you will want to measure from the center of your hitch pin hole to th
  view full answer...


• Keyed Alike DeadBolt Trailer Hitch Receiver & Coupler Lockset # 7685 Recommendation
• You would want to get a DeadBolt Trailer Hitch Receiver & Coupler Lockset # 7685. You can select keyed alike from the drop down menu on the product page and then enter the quantity you would like. At this time the time the Master Lock Hitch Receiver and Coupler Latch Lock Set # 1481DAT is not offered keyed alike.
  view full answer...


• Will Swagman Anti-Rattle Locking Hitch Pin and Cable, # S64031 Fit a Swagman XP Bike Rack
• Yes, the Swagman Anti-Rattle Locking Hitch Pin and Cable, # S64031, is the correct lock for Swagman bike racks that fit both 1-1/4 inc and 2 inch trailer hitch receivers like your Swagm XP, # S64950. Each bike rack company that offers a thread hitch pin or lock has it uniquely threaded to only work with their respective bike racks.
  view full answer...


• Availability of Anderson Rapid Hitch Lock and Adjustment Pin Lock Set with 3-1/2 x 6-1/2 Dimensions
• We have the Anderson Rapid Hitch Trailer Hitch Receiver Lock and Adjustment Pin Lock Set for 2-1/2 Inch Trailer Hitches, part # AM3492. It has adjustment locking pin dimensions of 4-1/4 inside width and 7-1/2 inches overall length. The hitch receiver lock dimensions are 3-1/3 inches inside width and 6-1/2 inches overall length. I also have the Anderson Rapid Hitch Locking Adjustment Pin for AM3400 Series, part # AM3428. This lock pin is recommended as both the receiver pin lock and the adjust
  view full answer...


• Will Swagman Locking Anti-Rattle, Threaded Hitch Pin, # S64029 Fit a Thule Bike Rack
• Each company that uses a threaded hitch pin has a uniquely threaded pin that will only work with the bike racks made by that company. The Swagman Locking Anti-Rattle, Threaded Hitch Pin, # S64029, will only fit Swagman racks designed for 1-1/4 inch bike racks and 1-1/4 and 2 inch bikes racks (will not fit 2 inch only bike racks). The threaded hitch pin lock you will need for a 2 inch Thule bike rack is the Snug Tite, # THSTL2. I have included a link to a video review of this lock for you to v
  view full answer...


• Swagman Locking Anti-Rattle Device # S64029 Recommendation for a Swagman XTC2 Bike Rack # S64670
• For your Swagman XTC-2 # S64670 you could use the Swagman Anti-Rattle Locking Hitch Pin and Cable # S64031 that you referenced. If you wanted it without the cable you could get a Swagman Locking Anti-Rattle Device # S64029.
  view full answer...


• How to Lock the Hitch Lock # 63140-1 on Tow Ready Bike Rack Hitch Pin
• When Locking the Hitch Pin Lock, # 63140-1, to the hitch pin from the Rola TX-103 3 Bike Rack, # 59403, you will need to apply pressure to the back of the lock, to get it to snap securely in place. I did a short video showing how the hitch pin locks for you to review.
  view full answer...


• Does the Trailer Hitch Receiver Lock # 5201 Act as a Hitch Pin
• This Trailer Hitch Receiver Lock, part # 5201, will act as a hitch pin and you will not need to buy an additional one. There is also not a weight limit for this product because it will not be bearing any of the weight of your cargo carrier. The hitch and cargo carrier will bear the weight of your cargo. However, you will want to be aware of the weight capacity of the hitch and cargo carrier and be careful not to exceed the capacity of the lowest rated component. I attached a review video
  view full answer...


• Recommendation for a Trailer Hitch Pin Lock with a Usable Length of 4 Inches
• The inside width of the hitch lock # RM-316, will not be long enough at 3-3/4 inches, but you may be able to use Locking Adjustment Pin, # AM3428. This lock has a usable length of 4-1/4 inches. Another option is to use a cable lock, like # CAB-10 which has a diameter of 5/16 inches and it is 10 feet long.
  view full answer...


• Hitch Lock # KUATLOCK Recommendation for the Kuat Beta # B202-114
• For a hitch lock on a Kuat Beta Aluminum Rack, part # B202-114, I would recommend you get a Kuat Bike Rack Hitch Lock, part # KUATLOCK. This hitch lock is recommended by Kuat for the # B202-114 and would be my first choice. The Kuat lock is recommended because it has a 3/8 inch diameter and the # 40106 you referenced has a 1/2 inch diameter.
  view full answer...


• Recommended Anti-Rattle Device for Cargo Carrier on a 2010 Toyota RAV4
• For your Class III receiver with the 2 inch opening, I would recommend either the Roadmaster Quiet Hitch, part # RM-061, or the Softride Anti-Rattle Device and Locking Hitch Pin, part # SR25219. We have a product demonstration video showing how each of these products works. To view the videos, use the provided link.
  view full answer...


• Inside Hitch Pin Width of Trailer Hitch Receiver Locks # RH5 and # RH5-XL
• The inside measurement of the exposed pin on the Trailer Hitch Receiver Lock, part # RH5, 3-1/16 inches. The inside measurement on the Trailer Hitch Receiver Lock, part # RH5-XL, is 3-5/8 inches. I went into our warehouse and confirmed both of these measurements. Since you are looking for a tighter fit than the hitch pin lock that you bought that has an exposed measurement of 3-1/4 inch I would recommend the # RH5-XL since it measures 3-1/16 inches. You do not typically want a really sn
  view full answer...