Expert Answers about Lamp Guards

• How are the Husky Shield Headlight Protectors HL07027 Installed and are They Removable
• The Husky Shield headlight protectors # HL07027 are an adhesive film, and they are applied using a wetting solution. You use the included application card to smooth out any bubbles. The process is really similar to applying a screen protector on a smart phone, if you have done this before. The two images I have included from the product page will give you an idea of how simple the installation will be on your 2012 Ford Edge.
  view full answer...


• Are the Right and Left Sides Included with the WeatherTech Custom LampGuards for a 1998 Ford Escort
• Yes, both the right and left sides are included with the WeatherTech Custom LampGuards, # WTH0514W. When you receive the package, both sides will be stuck together face-to-face to help prevent damage during shipping. I have attached a link to the installation instructions for you to check out.
  view full answer...


• Can WeatherTech Lamp Guard Covers for a 2012 Subaru Outback be Removed
• I spoke with my contact at WeatherTech about removing Lamp Guards like # WTH3808GW and I have some tips should you need to remove them at some point in the future. You would need a hair dryer and some thing but strong fishing line. Heat up the Lamp Guard starting at an edge and once the adhesive gets hot enough you should be able to start pulling it back slowly. Keep applying heat and slowly peeling. The fishing line could be used to help the peeling process as needed. Once you have remo
  view full answer...


• Installation of Custom Fit WeatherTech Lamp Guards for the 2011 BMW X6
• The WeatherTech Custom LampGards, # WTH2136W, are custom designed to specifically fit your 2011 BMW X6 so you will not need to cut them for installation. I have included a link to the installation instructions for you to view. Special tools are not required but you will need a spray bottle, rubbing alcohol, water, lint-free cloth, and a hair dryer. When installed properly on a clean headlight assembly these covers will last for several seasons. Particularly harsh climates will have a greater
  view full answer...


• How to Remove Weather Tech Lamp Guards from Vehicle Headlights
• I spoke with my contact at Weather Tech regarding the removal of their Lamp Guards like # WTH0713W. She confirmed by initial thoughts in that you can use a hairdryer to heat up the glue that holds the Lamp Guard on. The glue will become tacky enough that you can start to peel off the guard. But keep applying heat from the hairdryer and peel slowly. You could also get it started and then run some fishing line underneath to separate the guard from the adhesive. In both cases there will be left
  view full answer...