Expert Answers about Exhaust Tips
When Installing MagnaFlow Stainless Exhaust Tip # MF35187 Does the Factory Exhaust Need to be Cut- According to my technical contact at MagnaFlow, when installing the 20-inch Stainless Clamp-On Exhaust tip # MF35187, you will not have to cut the factory exhaust on your 2013 Dodge Ram 3500.
This part simply clamps on over your existing 4-inch diameter exhaust pipe using the welded-on band clamp.
This tailpipe tip does have a lifetime warranty from MagnaFlow.
view full answer...
- Availability of Slip-On Exhaust Tip with 2 inch Diameter Inlet
- The closest I can come to the dimensions you mention would be the # MF35208 which is compatible with a 2-1/4 to 2-1/2 inch tailpipe, has a 3 inch diameter outlet and is 12 inches long.
Unfortunately, none of the exhaust tips we offer have a 2 inch inlet.
view full answer...
- How to Quiet Loud Exhaust Noise Inside the Vehicle After Installing New Dual Exhaust
- Loud exhaust noise on the inside, with a deep drone, sounds like it could be a system with glass packs or another modified exhaust system that has a straight through type of muffler. If you switch the straight through mufflers with chambered mufflers it will take care of that issue.
You will also want to check to see if there is a leak in the system somewhere, possibly ahead of the muffler and behind the headers. That happened to me once and it was horribly loud. A muffler shop should be abl
view full answer...
- 36 Inch Exhaust Tailpipe and Resonator Tip for Vehicle
- The longest exhaust tip that we stock at this time for a 2-1/4 inch tube is the MagnaFlow 3-1/2 inch Exhaust Tip, # 35217, which is 18 inches long.
It sounds as if you are looking for a tailpipe and resonator tip for your vehicle. If you could send us the Year-Make-Model of your vehicle and any other information that would be helpful in selection of a tailpipe and an exhaust tip, I would be glad to help in any way I can.
view full answer...
- Does MagnaFlow Exhaust Tip # MF35146 Fit a Tailpipe With 2-1/2 Inch Inner or Outer Diameter
- Yes, you did order correctly, the MagnaFlow Exhaust Tip, part # MF35146, is designed to fit a 2-1/2 inch outside diameter tailpipe. The length of the exhaust tip is 18 inches, so you will also want to make sure the length will fit your vehicle.
This is a weld-on exhaust tip, so professional installation is recommended.
view full answer...
- Will a Bully Bolt-On Exhaust Tip Fit a 2008 Jeep Wrangler Rubicon
- The Bully Slant Resonated Bolt-on Exhaust Tip, # PM-5102, fits on pipe diameters from 2-3/4 inches to 3-1/2 inches. You will need to measure the pipe diameter on your 2008 Jeep Wrangler Rubicon to determine if this or another size will fit.
From what I could find, the stock pipe on your Jeep could be 2-1/2 inches which would make it too small for the tip you referenced. For this size, # PM-556 would be a better fit. But, again, measuring the diameter of the tailpipe tubing would tell you for
view full answer...
- Availability of Exhaust System for 2005 Chevrolet Corvette C6
- For a 2005 Chevrolet Corvette C6 I have the MagnaFlow Stainless Steel Axle-Back Exhaust System, part # MF15886. This is an axle-back system that will install from the axle back to the tailpipe. The polished stainless steel quad tips ( dual tips on each side) are 4 inch diameter. The diameter on the mandrel bent tubes is 2-1/2 inches that connect the system to your exhaust system. I am including a link to the installation instructions on the axle-back system.
There is also two cat-back systems
view full answer...
- How to Determine the Correct Bolt-On Stainless Steel Exhaust Tip for a 2009 Chevrolet Tahoe
- You will need to measure the overall diameter of the tailpipe on your 2009 Chevrolet Tahoe to select the correct tip. It would also help to measure the distance out that the exhaust tip would need to extend, so you could select a tip that is not too long or too short.
I have provided a link to all of the clamp on exhaust tips we carry. Once you have the measurements for your Tahoe, you can click on the link, then on the right side of the page you can select the inlet size and length of tip th
view full answer...
- Recommend 4 Inch Exhaust Tip for Motor Home
- When using a clamp-on exhaust tip, you will want the exhaust tip to slip over the existing exhaust pipe on your motor home. I do have an exhaust tip that will clamp-on to your existing exhaust system, Brophy Clamp-On Exhaust Tip, part # CE40, which is a 4 inch diameter tip.
The item you selected, MagnaFlow 4 Inch Exhaust Tip, part # MF35181, is a weld-on application. I would recommend having a muffler shop install part # MF35181.
view full answer...
- What is the Difference Between a Resonator Exhaust Tip and a Regular Exhaust Tip
- A resonator exhaust tip can be considered as a cavity resonator in which the design causes the air to vibrate a certain way in a hollow cavity which produces a certain sound. They can be used in some systems to work with the muffler to reduce noise. But at the tip, a resonator exhaust tip will produce more noise versus a regular exhaust tip.
That loud, high frequency, reverberation sound you hear on import tuner cars is resonator exhaust. If that is the sound you are looking for, then a reson
view full answer...
- Does Bully Slant Resonated Bolt-on Exhaust Tip # PM-5102 Replace the Vehicles Muffler
- You will still need a muffler when using the Bully Slant Resonated Bolt-on Exhaust Tip, part # PM-5102, on your vehicle.
The Bully Exhaust Tip, part # PM-5102, slips over the existing tail pipe and bolts into place using the 3 set screws to secure the tip into place. This item fits exhaust pipes from 2-3/4 to 3-1/2 inches in outside diameter. It is designed with a resonator to increase the sound output and is stainless steel for a nice look. It is not to be used as a replacement for your muff
view full answer...
- Clamp-On Exhaust Redirect Exhaust Tip For a 2008 Ford Explorer or Taurus
- The Clamp-On Exhaust Redirect, # CE30, is designed to fit on a tailpipe that has a 3 inch outside diameter. You will need to measure the exhaust on your 2008 Ford Explorer and/or Taurus to determine what size the tailpipe is and if there is a long enough section exposed to install the tip.
I have included a link to all of the exhaust tips we carry.
view full answer...
- Will Adding Bully Slant Exhaust Tip # PM-5102 to a 2010 Toyota Tundra Affect the Engine or Exhaust
- Adding the Bully Slant Exhaust Tip, part # PM-5102, to your 2010 Toyota Tundra will not affect the engine or performance. It is designed with a resonator to increase the sound output and is stainless steel for a nice look. Since it sounds like you had it installed properly you should have no problems with it causing any problems to your vehicles engine.
view full answer...
- Availability of an Exhaust Tip for a 2001 Chevy Suburban 1500
- The MagnaFlow 5 Inch Exhaust Tip, # MF35183, is designed to be welded onto a 4 inch tail pipe. If the tail pipe on your 2001 Chevy Suburban is 4 inches in diameter and you have side exit exhaust, this tip will fit. For weld on applications, we recommend having it professionally installed.
If you find your tail pipe has a different diameter or you do not want a weld on application, we have numerous other diameter pipes and clamp on applications that may work for your Suburban. I have included
view full answer...
- Which MagnaFlow Stainless Exhaust Tip Will Fit A Ford F-250 Super Duty Diesel
- The MagnaFlow 5 Inch Exhaust Tip - Stainless, Clamp-On for 3-1/2 Inch Tailpipe, part # MF35213, is a universal fit item. The exhaust tip will clamp-on to 3-1/2 inch tailpipe. You will need to measure the outer diameter of your tailpipe to see if it will fit your Ford F-250 Super Duty Diesel.
The exhaust tip # MF35213 is 14-1/2 inches in length, so you will want to measure on your vehicle where it would clamp onto the tailpipe to see if there will be room for it to fit correctly.
Most of t
view full answer...
- Which Magnaflow Exhaust Tip Will Fit 2.1 Inch Exhaust On 1968 Ford F-100 Truck
- I spoke with our representative at Magnaflow and he informed me that the closest tip that is available to fit 2.1 inch exhaust is 2-1/4 inches. He informed me that you would need to have the tips installed at an exhaust shop, as they would need to either use a sleeve for the tip to fit tightly or flex the exhaust pipe out to 2-1/4 inches for the tip to fit correctly.
The item you selected, MagnaFlow 3 Inch Exhaust Tip - Stainless, Clamp-On for 2-1/4 - 2-1/2 Inch Tailpipe, part # MF35208, woul
view full answer...
- Will the CE50 Clamp-On Exhaust Redirect Fit an Exhaust Pipe with a 5 Inch Outer Diameter
- Yes, the # CE50 Brophy exhaust redirect will fit your 5 in diameter tail pipe. The installation is very straight forward as well, as you would only need to use the included clamp to attach the redirect to your existing exhaust pipe.
view full answer...
- Is Cutting Exhaust Pipe Necessary to Install Bully Slant Exhaust Tip Part # PM-5102 on 2010 F-150
- The Bully Slant Exhaust Tip, part # PM-5102, slips over the existing tail pipe and bolts into place using the 3 set screws to secure the tip into place.
This item fits exhaust pipes from 2-3/4 to 3-1/2 inches in outside diameter.
view full answer...
- Is the Bully Round Slant Weld-on Exhaust Tip, # PM-578 Chrome Plated or Stainless Steel
- The pictures of the Bully Round Slant Weld-on Exhaust Tip, # PM-578, that I am able to bring up on the product page and through search show the tip in the stainless steel finish. The zoom in pictures on the product page are just larger versions of the small pictures. They might look a little different because there is greater detail. A member of our photo team verified that the pictures on the product page are ones that we took here on site of the tip, so it has not been chrome dipped or plated
view full answer...
- Can Magnaflow Exhaust Tip MF35143 Be Bolted on to a 2007 Dodge Ram Pickup
- These tips need to be welded on. Bolt-on exhaust parts utilized specially formed joints with clamps to seal them tightly. The tips you were looking at are not designed to be bolted on.
In order to find out what tips will fit your exhaust system, you will need to measure the outer diameter of the current tail pipe. If your tail pipe has a 2-1/2 to 2-3/4 inch OD tailpipe, we have a couple of clamp on tips you can use from Magnaflow. Part # MF35209 and part # MF35210 can both be clamped on to 2-
view full answer...
- Do you Carry an Exhaust Tip for 3-3/4 Inch Tail Pipe
- We have a tip available for the 3-3/4 inch tail pipe. It is part # PM-5105. I have added a link to it below.
view full answer...
- Is Cutting Required to Install Bully Exhaust Tip PM-5102 on a 2006 Chevy Avalanche 1500
- I spoke with my contact at Pilot, and the # PM-5102 will have about 3-1/2 inches into which you can slide your existing exhaust without obstructing the resonator.
You can slide the exhaust further through if you like, even as far as the end of the tip, but since you will be covering up some of the resonator inside the sound you get might not be as throaty.
If you want the resonator to be fully effective, or if you just need extra room, it would not be a problem to trim down the exhaust on
view full answer...
- Do the Magnaflow Exhaust Tips Make the Loud Sound On The Exhaust System
- The Magnaflow exhaust tips themselves do not make the noise, however they are great for adding the look of an upgraded exhaust system without actually buying the whole system. It is the muffler that actually makes the noise due to baffles inside that direct the emissions to give that loud sound.
I have included a link to an installation of the entire exhaust system, and you can see underneath the vehicle what produces the sound. The video link will also let you hear the difference in the exh
view full answer...
