Expert Answers about Custom Fit Vehicle Wiring,Wiring
Installing 4-Pole/7-Way Trailer Connector on Newmar Motorhome- There is not an off-the-shelf adapter that would convert your existing 7-way flat blade to a 7-way and 4-pole, but there are some fairly easy options for adding a 4-pole.
You can access the wiring harness leading to the existing 7-way, and tap in a 4-pole harness like part # 18172, which would allow you to use both harnesses simultaneously. A circuit tester like part # 40376 would help identify which circuit serves which lighting function.
Another option would be to completely remove your
view full answer...
- Plug and Play Trailer Wiring Harness for a 2008 VW Passat 4Motion Wagon with Park Sensors
- Good news! We now carry a wiring harness that has been verified to work on your 2008 VW Passat Wagon with 4Motion and park sensors. The Tow Ready Custom Fit Wiring, # 118530, will provide a no-frills 4-pole flat trailer connector for your vehicle, and easily installs with plug and play connectors. The only splicing required is for running the power wire for the converter to the vehicle battery, see instructions link.
It is possible that the forum you found has the correct information for inst
view full answer...
- Availability of a Short 5th Wheel and Gooseneck Trailer In-Bed Wiring Harness
- All of the 5th wheel and gooseneck in-bed trailer wiring extensions are either 7 feet long, like # 20027, or 9 feet long. A shorter one is not available. What you could use is the Pigtail Wiring Harness, # PK11998, which is 4 feet long, and the Pollak Replacement 7-Pole, RV-Style Trailer Connector, # PK11893.
You would need to hardwire in the wiring harness to a trailer side connector like # PK12706. I have included a link to a video that should help and a link to our wiring FAQ. The wiring
view full answer...
- Trailer Wiring Harness for a 1993 Toyota Pickup Truck
- For a 1993 Toyota Pickup, the correct trailer wiring harness is # 118379. I have included a link to the installation instructions and a link to a video showing a typical installation.
If you have a 1993 Toyota T100, you would need # 118496. I have included a link to the installation details for this harness as well.
view full answer...
- Trailer Wiring Harness Options for a 2011 Toyota Sienna
- I currently show 2 wiring harnesses for a 2011 Toyota Sienna. First, from CURT, we have the Circuit Protected T-Connector Vehicle Wiring Harness, # C56106. I have included a link to the installation instructions for you.
The other is the Tow Ready T-One Connector w/Upgraded Circuit Protected ModuLite, # 118498. I have included a link to the installation details and a link to a video showing a typical installation for you.
Valley does not have a wiring harness listed for the 2011 Sienna.
view full answer...
- Availability of a T-1 Harness for a 2008 Hummer H3
- As your H3 was not equipped with the tow package, the Hardwiring Kit you referenced, part # 18252 is what you would need.
I have provided a link to an install video you can refer to for assistance. The video shows the 4-pole being installed on a different vehicle, but the procedure would be the same. You would use the tester to probe the wiring behind your tail light assemblies, to determine which circuit to tap each wire of the harness into. have a helper activate the right turn signal, and
view full answer...
- What Trailer Wiring Harness Is Available For A Mercedes-Benz M-Class
- The Tow Ready Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, part # 119176KIT, is the only wiring harness I sell to fit a 2003 Mercedes M-Class.
The wiring harness that attaches to the factory plug can only be obtained from the Mercedes dealer. Mercedes does not allow anybody else to sell that factory plug.
I am including a link to the installation instructions for the Tow Ready wiring harness and a video link of the wiring harness being installed on a 2008 Volks
view full answer...
- Availability of a Aftermarket Wiring Harness for a 2009 Lexus RX350 with Factory Tow Package
- We do have a wiring harness that will work on your vehicle but at this time there is not an aftermarket trailer wiring connector available for the tow package connector on your 2009 Lexus RX 350.
The wiring harness that is recommended for your vehicle is the Tow Ready Custom Fit Vehicle Wiring for the Lexus RX350, item # 118478. This harness installs inline with the vehicle tail light connectors and requires a power wire, that is run to the positive post of the vehicle battery. This power wir
view full answer...
- Availability of T-1 Connector for 2009 Subaru Impreza Wagon
- Due do differences in the tail light assemblies on the Impreza Wagon, the T-1 harness for the sedan will not work with the wagon. Unfortunately a T-1 harness is not available for the wagon.
The quick splices and circuit tester included with the install kit make installation pretty simple. Access the rear of the driver's side tail light assembly, have a helper activate the left turn signal, and use the included tester to probe the wires exiting the tail light assembly until you find the wire t
view full answer...
- Availability of 4-Round Trailer and Vehicle Connectors that Will Accept 12 Gauge Wire
- A 3-flat is indeed a tough plug to find. It might be best to change to a 4-Way of some type. We have the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector, # PK11402, that will accept up to 12 gauge wire. This is a trailer end plug.
The vehicle side is the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket, # PK11404. It, too, will accept 12 gauge wire.
I have included an FAQ article on trailer wiring below.
view full answer...
- Is There a Fifth Wheel Install Kit Available for a 2010 Dodge Ram 3500 6 Foot Bed
- Yes there are fifth wheel bracket kits available for your 2010 Ram 3500. You would use Valley kit, part # V55340R. This kit includes the brackets that bolt to the frame and the rails that sit in the bed and attach to the frame brackets. I have included a link to the instructions so you can see how the kit installs.
You may also be interested in wiring, to attach your trailer wiring in the bed of your truck. The 5th Wheel and Gooseneck 90-Degree Wiring Harness with 7-Pole Connector, part # 51-
view full answer...
- Availability of a Plug and Play Wiring Harness for a 2006 VW Touareg.
- At this time we do not have a custom wiring kit for the 2006 VW Touareg. You would need to hard wire your vehicle with the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes Testers, item # 119176KIT, which includes all of the wiring, connectors and a circuit tester to complete the installation.
The circuit protected Modulite will use a power wire from the vehicle battery to power the lights on the towed item. This protects the vehicles sensitive circuitry and
view full answer...
- Preventing Damage to 4-Way Connectors on Trailers Used by Many People
- There are a few solutions I can think of. First I will list some parts that you may find useful then explain some of the ideas I had.
We offer a weather proof junction box, part # 38656, that would allow people to make hardwire connections without cutting your 4-pole connector off. We do not carry any heavy coated wire, but we do carry wire loom that might make cutting a bit more difficult like part # 459075-1.
The best solution for preventing cutting I could think of is using flexible met
view full answer...
- Do Your Carry an OEM Replacement 6-Way Connector for a 2008 Ford F-150
- A 2008 Ford F-150 would have come with either a 4-Way or 7-Way connector. There is not an OEM 6-Way. You can convert your 4-Way into a 6-Way using 6-Way Installation kit part # ETBC6. You would plug your existing 4-Way into the 4-Way socket on the ETBC6, then you would run the blue wire to either the reverse lights or brake controller, depending on how your trailer is set up, and then you would run the red wire up to the battery for a 12V power source.
view full answer...
- Tail Light Converter for a 2000 Pontiac Montana
- Here is an inexpensive tail light converter, item # 119130, that would work great for you. Simply cut the wires leading to your existing converter, and wire the new one in.
view full answer...
- Circuit Protected Taillight Converter with 4-Pole End for a 1999 Plymouth Breeze
- You are correct, there is not a T-Connector for your vehicle. You will need to hardware your vehicle using a Taillight Converter. I would recommend the Upgraded Circuit Protected Taillight Converter with 4 Pole End, part # 119175 or 119175KIT. They are actually the same harness, but the # 119175KIT comes as an installation kit which has all the items needed to assist with the install.
view full answer...
- Availability of a Plug and Play 2005 Honda Element Trailer Wiring Harness
- Currently none of our suppliers offer a plug in harness for the 2005 Element. I recommend the Upgraded Circuit Protected Taillight Converter Hardwire Kit with 4 Pole End, item # 119175KIT, for your 2005 Honda Element.
view full answer...
