Expert Answers about Bug Shield

• Does EGR Aerowrap Full Wrap Bug Shield Part # 393411 Include a Mounting Kit or Accessories
• The EGR Aerowrap Full Wrap Bug Shield for the Ford F-250, part # 393411, does not include any accessory items but does come with an installation kit consisting of plastic and metal clips and an alcohol prep pad for cleaning the attachment points. The shield installs without any drilling required using the supplied hardware. I have linked a video showing installation of a similar EGR product on a Ford F-150. While the specific product differs slightly from part # 393411 this video will show yo
  view full answer...


• Will the Putco Element Bug Shield # P470200 Fit on a 2013 Ram 1500
• I spoke with my contact at Putco and she told me that the Putco Bug Shield, # P470200, has been confirmed to fit the 2013 Ram 1500. While we have not tested this item on a 2013 Ram 1500 at our facility, Putco has tested this bug shield on a 2013 Ram 1500 and said you should not have any issues. For a grille guard, we offer the Westin Ultimate Bull Bar, # 32-1965 for black or # 32-1960 for chrome-plated stainless steel. Because Dodge slightly redesigned the front fascia of the 2013 models, aft
  view full answer...


• Installation of EGR Aerowrap Full Wrap Bug Shield # 393171 on 2006 Ford F-150
• To install the EGR Aerowrap Full Wrap Bug Shield # 393171 on your 2006 Ford F-150, you will need to remove the grille. However, the installation process is relatively easy and requires no drilling. I have attached a video providing more information.
  view full answer...


• Will Weather Tech Easy-On Stone and Bug Shield Deflector, Part # WT50186, Hold Up to Car Wash?
• This particular product is specified to fit all 2008-2010 models of the Toyota Highlander; it is not specified for the 2013 4Runner. WeatherTech does not recommend installing their Easy-On Stone and Bug Shield Deflector, Part # WT50186, on vehicles that will be cleaned in automatic brush-style car washes. Also they warn against the use of any type of cleaning solvents; only mild soap and water are to be used on this item. The bug shield product we currently offer for your 4Runner is the H
  view full answer...


• Will an EGR Bug Shield Hood Protector Fit a 2012 Dodge Ram Laramie 1500 Limited
• The EGR hood protector # 392651 will fit your 2012 Dodge Ram Laramie 1500. This is a full wrap protector that covers end to end on the hood. For a thicker, taller shield that will also fit we have # 302651. This protector covers the center section of the hood but does not extend to the ends.
  view full answer...


• EGR Bug Shield Installation on a 2002 Chevrolet Silverado HD2500 LS Extended Cab
• The EGR Superguard Bug Shield, # 301421, will install using the same 5 holes as your patriotic bug shield # 301429. I spoke with my contact at EGR and verified that the installation will be the same for both bug shields. They are made from the same mold so they will have the same fit and installation as your current bug shield.
  view full answer...


• Does the Husk Liners Bug Shield for a 2012 Ford Edge Come with the Installation Kit
• Yes, the installation kit is included with the Husky Liners bug shield # HL07029. The installation kit includes a spray bottle, 2 bottles of concentrated install solution, a plastic widget, and a block of prep putty.
  view full answer...


• Bug Shield Color Choices for 2012 Ford F150
• I have linked you to the available bug shield options for you 2012 Ford F150. As you can see, the smoke color is all that is available. You might be interested in the Husky Liners Paint Protection Kit, part # HL06949. The kit contains translucent 6-mil thick urethane film pieces that will protect the front of your hood, fenders and door edges. The film pieces are nearly invisible, and would allow the paint color to show through. I have linked you to the installation instructions of the Pai
  view full answer...


• Availability of a Bug Deflector for a 2012 Toyota Highlander
• I do have a solution to protect the vehicle similar to a bug shield, but the WeatherTech bug shield # WT50186 will not fit a 2012 Toyota Highlander. What you can use is Husky vehicle paint protection kit, # HL07969, for the hood, fenders, and door edges. This kit protects against nicks, dings, and bug stains.
  view full answer...


• Installation of EGR Superguard Bug Shield # 303371 on a 2012 Ford F-150 XL
• The correct EGR Superguard bug shield for a 2012 Ford F-150 XL is # 303371. The Superguard Bug Shield attaches to the hood of your truck with the included hardware. The hardware, threaded screw plugs, with screws, fit in existing holes in the hood of your truck. The plugs are inserted into the holes on the hood and the shield is attached to the hood with screws that will screw into the plugs. Only vehicles that have the grille attached to the hood would have to have the grille removed.
  view full answer...


• Is there a Bug Shield That Mounts Over the Chrome Trim on the Hood of a 2012 GMC Sierra 1500
• The EGR Aerowrap Bug Shield, # 391601, that you referenced will fit on your 2012 GMC Sierra 1500 Crew Cab, but it will cover the chrome on your hood. For a bug shield that will not cover the chrome we offer the Husky Liners Bug Shield, # HL07219, which is a protection system made from a urethane film that is designed to help eliminate nicks, dings and bug stains on the hood of your 2012 GMC Sierra 1500 Crew Cab. This film will install above the chrome on your hood, however, it is not a p
  view full answer...


• Installation of EGR Superguard Bug Shield # 303371 on 2012 Ford F-150
• The EGR Superguard Bug Shield, part # 303371, will attach to the hood of your 2012 Ford F-150 with the included hardware. The hardware is threaded screw plugs, with screws, that will use existing holes in the hood of your vehicle. The plugs are inserted into the holes on the hood and the bug shield is attached to the hood with screws that will screw into the plugs. The installation does not require any drilling.
  view full answer...


• EGR Aerowrap Bug Shield Installation on a 2006 Hummer H3
• The EGR Aerowrap Bug Shield, # 391311, installs using plastic screw plugs using existing holes on the underside of your hood. I have attached an installation video of a similar Aerowrap bug shield. The vehicle is different, but the installation process is the same.
  view full answer...


• Is Mounting Hardware Included on EGR Aerowrap Hood Protector # 394801 For 2011 Nissan Armada
• The EGR Aerowrap Hood Protector, part # 394801, for your 2011 Nissan Armada, does come with the no-drill installation hardware. the hardware is supplied with the part from EGR. The installation hardware is particular to that part number for the specific vehicle it is designed to fit.
  view full answer...


• Will the EGR Chrome Aerowrap Part # 391624 Fit a 2011 Chevy Silverado
• The EGR Chrome Aerowrap Bug Shield you referenced, part # 391624 is a fit for 1999-2007 Sierra Classic and 2000-2006 Yukon and Yukon XL models. To see the bug shields available for your 2011 Silverado, click on the provided link.
  view full answer...


• How Does the EGR Superguard Bug Shield Hood Protector Install on a 2007 Jeep Commander
• To install this EGR Superguard Bug Shield Hood Protector # 305041 on your 2007 Jeep Commander you will snap the installation blocks into ports under your hood and then use the included screws to attach the bug shield to the blocks. Check out the video I attached that shows a similar Superguard Bug Shield installing onto a similar vehicle to give you an idea of how it installs.
  view full answer...


• Will Weather Tech Easy-On Stone and Bug Shield Deflector # WT50189 Work on a 2010 Dodge Journey
• The Weather Tech Easy-On Stone and Bug Shield Deflector, part # WT50189, is a bug shield and a stone deflector. It is aerodynamically designed to not alter the airflow of the vehicle, but still offer protection from rock chips during a road trip. It installs with either 3M automotive tape or fasteners that will use existing holes in your vehicles hood. No drilling is needed. I think it would help tremendously on your road trip to Alaska in your 2010 Dodge Journey. Have a good trip and I ho
  view full answer...


• How Does the EGR Aerowrap Bug Shield # 394991 Install on a 2009 Nissan Frontier
• This EGR Aerowrap Bug Shield # 394991 that you referenced uses plastic screw plugs that will install into existing holes on the underside of your hood. I attached a video that shows how a similar Aerowrap bug shield will install onto a different vehicle to give you an idea of how it will install.
  view full answer...


• How Does the WeatherTech Bug Shield # WT50195 Install on a 2010 Chrysler Town and Country Limited
• I spoke with my contact at WeatherTech and he informed me that the WeatherTech Bug Shield # WT50195 will install using automotive tape on the underside of the hood of your 2010 Chrysler Town and Country Limited and will not interfere with the Chrysler emblem at all.
  view full answer...


• Installation of EGR Superguard Hood Protector # 304801 on a 2010 Nissan Titan
• The EGR Superguard Hood Protector, part # 304801 will install on a 2010 Nissan Titan. The Superguard protector will attach to the hood of your vehicle using existing holes on the underside of your hood. It includes the mounting hardware. The mechanical installation means that you will need to use hand tools to install the protector. You do not have to do any drilling or use tape to attach the protector to your vehicle.
  view full answer...


• How Does the EGR Superguard Bug Shield Hood Protector # 303611 Secure to a 2010 Ford Explorer
• The majority of what holds this EGR Superguard Bug Shield Hood Protector, part # 303611, is the factory scrivets that are in the middle of the grille. The two screws that go on the outer portion help secure it, but more screws would not be necessary to secure this to your 2010 Ford Explorer. The screw plugs will install in outer wing holes in the underside of the hood. They should snap right into what looks like slots on the underside of the hood near the outer edges.
  view full answer...


• Installation Of The Weather Tech Easy-On Deflector # WT50199 On A 2011 Ford F-250 Super Duty
• The Weather Tech Easy-On Stone and Bug Shield Deflector, part # WT50199, can be attached to your 2011 Ford F-250 Super Duty with either the 3M automotive adhesive tape, or fasteners that use existing holes in the vehicles hood. The mounting brackets are attached to the underside of the hood with tape or fasteners, so if you use the tape it is not to be directly applied to the paint surface of the hood. The mounting brackets that attach to the underside of the hood will allow the deflector
  view full answer...


• Will EGR Aerowrap Full Wrap Bug Shield Hood Protector # 392651 Fit 2010 Dodge Ram Sport Model
• I contacted our representative at EGR and she informed me that the EGR Aerowrap Full Wrap Bug Shield Hood Protector, part # 392651, will fit the 2010 Dodge Ram Sport if it is the 1500 model. Mechanical no drill installation means that there is no drilling needed for installation, and that part # 392651 will install using existing screw holes. Part # 392651 bolts in like an OEM bug shield would install.
  view full answer...


• Will EGR Superguard Bug Shield Hood Protector # 303611 Cover Grille on 2010 Ford F-250 Super Duty
• The EGR Superguard Bug Shield Hood Protector, # 303611, is designed to fit on the front edge of the hood and should not cover the Super Duty lettering on the grille. You can see in the pictures on the product page how the shield will contour around the grille portion of the truck.
  view full answer...


• Does the Factory Grille need to Be Removed to Install Superguard Bug Shield Hood Protector # 303171
• I spoke with my contact at EGR, and she stated that in order to install the Superguard Bug Shield Hood Protector, # 303171, you would have to remove the factory grille from the vehicle. One of the benefits of this shield is that it is a no-drill application, so you will not have to drill holes into your vehicle.
  view full answer...


• What Are Dimensions On EGR Superguard, # 303531, And EGR Aerowrap, # 393531, For 2007 Ford Explorer
• I called the supplier (EGR) to see if they had dimensions available on the EGR Superguard, # 303531, and the EGR Aerowrap, # 393531, for your 2007 Ford Explorer XLT. They did not have any dimensions available, but they said the dimensions are the same for both of them, the difference is the impact resistant material is stronger on the Superguard model.
  view full answer...


• Will the EGR Superguard 3D Carbon Look Bug Shield Fit On a 2004 GMC 2500 HD
• I spoke to my contact EGR and found that the EGR Superguard 3D Carbon Look Bug Shield, item # 204160, fits the 1997 Jeep Cherokee and will not work on your 2004 GMC 2500 HD pickup. I have posted a link below to the bug shields that we currently have available for your truck. The EGR Superguard Bug Shield Hood Protector, item # 301621, is the premium bug shield offered by EGR and has a smoked finish. This bug shield is thicker and stands taller than most providing better protection. The EGR A
  view full answer...


• Do You Carry Replacement Hardware for Old Draw-Tite Bug Shield
• The Draw-Tite bugshields are no longer in production and we cannot get any hardware for them. It would probably be best to just replace it. I talked to one of our installers here who has a Ranger with a bugshield. He has had both the Draw-Tite and the EGR bugshileds and prefers the EGR. We have 2 available bugshields available for your 2004 Ranger, part # 303261 and part # 393261.
  view full answer...


• Installation and Picture of the Superguard Bug Shield Hood Protector
• I am sorry but at this time we do not have a photo of the Superguard Bug Shield on a Chevy HHR. Installation is done by removing the knurled nuts that hold the grille to the hood and installing the hood protector between the grille and hood, making sure the protector is centered, then reinstalling the knurled nuts.
  view full answer...