Expert Answers about Bed Extender

• Will ATV Ramps Interfere with the Topline Bed Extender on a 2010 Chevrolet Silverado
• The Topline Bed Extender, # BX4004-02, will likely interfere with ATV ramps if it is left on your tailgate. The good news is that this bed extender is easily removable. The bed extender attaches to the side brackets with two release pins. Simply remove the release pins to move the bed extender out of the way when you load your ATV. I do not recommend leaving the bed extender attached when you load your ATV. Check out the installation video that I have attached for this bed extender. We insta
  view full answer...


• Will the Topline Bed Extender # BX4004-01 Fit a 2010 Ford F-150
• The Topline Bed Extender # BX4004-01 you referenced will fit a 2010 Ford F-150. The maximum width for this extender is 64 inches and its minimum width is 48 inches. This particular model is silver. We also have a model in black # BX4004-02. I have included a link to a video showing the typical installation of this product.
  view full answer...


• Will Topline Bed Extender # BX4004-01 Fit on 2012 Dodge Ram Pickup With Plastic Bed Liner
• The Topline Bed Extender # BX4004-01 you referenced will fit on your 2012 Dodge Ram Pickup, but since you have a plastic bedliner, you may have to do some trimming of that liner prior to installing the bed extender. It is recommended that the mounting brackets of the bed extender attach directly to the metal of the tailgate and if the bed liner interferes, we recommend trimming that section. Some drilling is also required for installation. The extender is lightweight and is easy to remove once i
  view full answer...


• Will the Topline Truck Bed Expander # BX4004-02 Fit a 2010 Chevrolet Silverado 1500
• The Topline Fold Down Truck Bed Expander, # BX4004-02, will fit on your 2010 Chevrolet Silverado 1500. This bed expander will fit both the standard and stepside bed styles. This bed expander will bolt directly to your tailgate and folds up when not in use. When folded, the bed expander will only take up 5 inches of truck bed space. You can also use this bed expander with most tonneau covers and truck caps. This bed expander is also available in silver as part # BX4004-01.
  view full answer...


• Is Drilling Necessary For Topline Bed Extender # BX4004-1 on 2003 Ford Ranger
• To install the Topline Bed Extender # BX4004-1 on your 2003 Ford Ranger, drilling will be required and there may be some trimming of your existing bedliner necessary. I have included a graphic showing where the drilling will need to be done. You may also be interested in the Loctite Threadlocker # LT37418 to ensure a tighter fit for the screws. I have included a link to instructions on the proper application of this product.
  view full answer...


• Installing Top Line Bed Extender # BX4004-02 on 2010 Dodge Dakota with Plastic Bed Liner
• The Topline Bed Extender you referenced, part # BX4004-02 is width-adjustable and will indeed fit your 2010 Dodge Dakota if the plastic liner you refer to covers a steel tailgate. You would need to drill through the liner to attach the bed extender, but the liner can remain in place. I have provided a photo showing the extender mounted to a tailgate that has the plastic liner.
  view full answer...


• What is the Recommended Truck Bed Expander for 2010 Toyota Tacoma
• Since the Covert-A-Ball Kwik Gate Bed Extender and Tailgate Step # KG48 is a universal-fit item, it is compatible for your vehicle. For your 2010 Toyota Tacoma, however, I recommend the Topline Fold Down Truck Bed Expander # BX4004-02. The Topline Bed Expander telescopes to fit almost any size pickup, expanding from 48 inches. and takes up only 5 inches of truck bed when not in use. It is light weight and durable and is easily removed in approximately 30 seconds with the removal of two releas
  view full answer...


• Will the Convert-A-Ball Kwik Gate Bed Extender Fit on a 2010 Toyota Tundra With Tonneau Cover
• You will have no problem closing your tail gate with the Convert-A-Ball Kwik Gate Bed Extender, # KG54-Gray, attached to your tail gate as long as you open your tonneau cover. The side bars of the bed extender are fixed so they will break the plane of your tonneau cover when you open your tail gate. Another factor that you may want to look into is whether or not the bed extender will interfere with your tonneau cover rails or latches. Some tonneau covers have rails mounted inside of the truc
  view full answer...


• Will the Topline Truck Bed Extender Fit a 2012 Toyota Tacoma with a 6 Foot Bed
• The Topline bed extender, # BX4004-02, will fit your 2012 Toyota Tacoma. We also have this same extender in silver, # BX4004-01. You might also be interested in a ramp, like # 11201, to help get the bike in the truck. This ramp can telescope from 5-/12 feet to 8 feet and has a capacity of 750 pounds.
  view full answer...


• Fit of Topline Truck Bed Extender # BX4004-02 on Tailgate of 2006 Hummer H2 SUT
• If the tailgate is between 48 and 64 inches wide, and has a flat spot on either end like I have shown in the photo, the Topline Bed Extender # BX4004-02 should work just fine for you. We have not yet had the opportunity to install the extender on a Hummer H2, so we do not have any photos at this time.
  view full answer...


• Truck Bed Extender Recommendation to Carry Kayak or Ladder in Truck Bed
• If you have a 2 inch trailer hitch receiver on your truck, then you may be interested in the Darby Extend-A-Truck Hitch Mounted Load Extender, # DTA944. This is the only product that we carry that will extend past your tail gate to carry items such as ladders or a kayak. You may also be interested in the Darby Foam Kayak Block, # DTA924. This will protect the hull of your kayak from the metal crossbar. Our other truck bed extenders will extend your truck bed to the length of your tail ga
  view full answer...


• Can a 50 lb Ladder be Rested on Top of The Convert-A-Ball Bed Extender Part # KG48
• Since the Kwik Gate Bed Extender is also intended for use as a tail gate step, a 50 lb ladder will pose no problem at all. Just to be sure, I phoned my contact at Convert-A-Ball. I was told that when used as a step, the bed extender has been tested up to 400 lbs. The product will be more than strong enough for your needs.
  view full answer...


• Bed Extender and Tailgate Step for a 2007 Ford Explorer Sport Trac
• The Convert-A-Ball Kwik Gate Bed Extender and Tailgate Step, # KG48, is considered a universal fit item. It measures 48 inches wide. You will need to measure your bed width to determine if it will fit your 2007 Ford Explorer Sport Trac. I am not convinced that it is a fit based on the 48 inch measurement. The reason is because the other bed extenders we carry are also not listed as a fit and they are at least 48 inches wide. But you may be interested in # CAB-SG-2R. This is also a tailgate
  view full answer...


• Fit of Topline Bed Extender Part # BX4004-01 on 2003 Ford Ranger
• The Topline fold down bed extender you referenced, part # BX4004-01 will indeed fit the bed of your 2003 Ford Ranger. In addition to the sliver finish, the extender is also offered in an anodized black finish, part # BX4004-02. Unlike many bed extenders, the Topline model will fold up flat against the tail gate when not in use, only using 5 inches of space. To temporarily remove the extender, simply pull two pins. The extender is compatible with tonneau covers and bed caps.
  view full answer...


• Will a Bed Extender Fit a Ford Explorer Sport Trac with a Bed Liner
• The Topline Bed Extender, # BX4004-02, will fit if you have a bed liner. However, you may find that you will have to trim the bed liner on some vehicles. Since every vehicle and bed liner combination is different, I cannot say for certain if you will need to trim or not. On an Explorer Sport Trac, you will need to measure the width of the bed where the extender will fit. If it is 48 inches or greater in width, the extender will fit. We also have the Topline extender with an anodized silve
  view full answer...


• What Bed Extenders Will Fit a 2006 Toyota Tundra
• We do have bed extenders that will fit the 2006 Toyota Tundra but the one you have referenced will not fit. We have 2 options for your truck and the only difference between them is color. We have one with a silver finish, The Topline Bed Extender, # BX4004-01, that you have referenced, and we also have it in black, # BX4004-02.
  view full answer...


• Will the Topline Bed Extender Fit a 2011 Toyota Tacoma Prerunner SR5
• The Topline Bed Extender, # BX4004-02, is designed to fit all models of the 2011 Toyota Tacoma. You will need to drill into the tail gate for installation. Depending on your bed size, we have several tonneau cover options. I have included a link for you. You will need to select the correct bed length for your truck to see the available options.
  view full answer...


• Will the Topline Bed Extender Fit a 2010 Ford F-150 FX4
• According to Topline, the Bed Extender # BX4004-01, can be installed on trucks that have a tail gate cover that is plastic/fiberglass or a spray in type. The lift out bar could get in the way of the extender. But, the extender is width adjustable so you could move it in or out as needed and then install the mounting brackets.
  view full answer...


• Will Fold Down Truck Bed Extender # BX4004-02 Fit a 2003 Ford Ranger Flareside
• The Fold Down Truck Bed Extender-Black, part # BX4004-02, is designed to fit as many different trucks as possible. You will need to measure on your vehicle to determine if it will fit. It will need a minimum of 48 inches to fit. If the tail gate on your 2003 Ford Ranger Flareside is at least 48 inches wide and no greater than 64 inches wide, it will fit. The extender folds up flat against the tail gate when not in use and it will be 15-5/8 inches tall and protrude 5 inches into the bed when f
  view full answer...


• How Does the Topline Fold Down Truck Bed Extender Attach to the Tailgate of a 2003 Dodge Ram
• In order to attach the brackets from this Fold Down Truck Bed Extender # BX4004-02 to the tailgate of your 2003 Dodge Ram you will need to drill 4 holes in the tailgate, insert the turn nut into the drilled holes and then insert allen bolts through the brackets to the turn nuts and tighten them. I will send you a separate email that has instructions for this product for you to check out also.
  view full answer...


• Will the Topline Bed Extender Fit on a 2011 Ford F-150 with Factory Plastic Drop In Bed Liner
• Drilling is required for installation of the Topline Bed Extender # BX4004-01, but the installation instructions indicate that the Ford F150 full size trucks have tailgates with two holes on each side that can be used. If you remove the screws from these holes, you may use them instead of drilling, but you will still need to drill the aft hole in the tailgate, see drawing link. The bed extender will work with plastic bed liners. If your trucks plastic bed liner includes a tailgate cover then
  view full answer...


• Will a Fold Down Truck Bed Extender # BX400-02 Work on My 2004 Toyota Tundra Carrying a Motorcycle
• I spoke with my contact at Topline and she informed me that there is a good chance you would be able to accommodate your motorcycle that is 8 foot 2 inches long in the truck bed of your 2004 Toyota Tundra with this Fold Down Truck Bed Extender # BX4004-02. You could make it work because you can install the mounting brackets to your tailgate in such a way that the entire system could be mounted as close to the edge of the tailgate as you would like. Basically, as long as the bed extender is ce
  view full answer...


• Will Topline Bed Extender # BX4004-02 Fit a 2001 Ford Explorer Sport Trac
• The Fold Down Truck Bed Extender, # BX4004-02, is designed to fit as many different trucks as possible. It will need a minimum of 48 inches to fit. If the tail gate on your 2001 Ford Explorer Sport Trac is at least 48 inches wide and no greater than 64 inches wide, it will fit. The extender folds up flat against the tail gate when not in use and it will be 15-5/8 inches tall and protrude 5 inches into the bed when folded and the tail gate up. There are many different types of tonneau covers a
  view full answer...


• Attaching the Topline Bed Extender to a 2001 Ford F150
• The bed extender attaches to a metal bracket that is attached to the tailgate. The bracket is attached using screws. It is held to the brackets with removable pins. The whole unit can fold flat against the tailgate. Take a look at the product page pictures below the description to see some close up shots of the extender.
  view full answer...


• Will Bed Mat Interfere with Installation of the Bed Extender in a 2011 Dodge Ram Laramie
• The rubber bed and tailgate mat in your 2011 Dodge Ram Laramie will not prohibit the installation of the Topline Bed Extender, item # BX4004-02, on your pickup, but you may need to trim the bed mat for installation. Trimming is a decision that will have to be made at the time of installation, since we have not had the opportunity to install this item on a truck with a rubber bed mat yet.
  view full answer...


• Side to Side Distance Between Mounting Bracket Holes on the Topline Truck Bed Extender # BX4004-02
• The Topline Fold Down Truck Bed Extender, part # BX4004-02, is a universal-fit item, and will adjust to fit truck beds of differing widths. The bed extender when not extended and fully retracted measures 48 inches in overall width. You will need to check on your tailgate if you will have room to attach the mounting hardware. I do not have any experience with it fitting on a 1965 Ford Ranchero, but to try and help you see if it will fit to your tailgate, I pulled the bed extender from the ware
  view full answer...


• Which Mounting Bracket Kit Fits Topline Bed X-Tender for a 2003 Toyota Tacoma
• For the Topline Bed X-Tender, # BX4004-01, for the 2003 Toyota Tacoma, you will not need any additional brackets or parts to install it on your truck. It attaches to the tailgate using included brackets and hardware. Take a look at the pictures below the description on the product page to see some close ups of the extender.
  view full answer...


• Availability of Convert-A-Ball Bed Extender in Black
• The Convert-A-Ball Bed Extender, part # KG48, which is 48 inches wide and KG100, which is 57 inches wide are both available in black. The 54 inch model is available in red, as well. That part # is KG54-Red. The tailgate step portion of the Convert-A-Ball Bed Extenders have a 400 lb weight capacity.
  view full answer...


• Installation and Compatibility of Kwik Gate Bed Extender # KG54-Red on 2006 Toyota Tundra
• I contacted our representative at Convert-A-Ball, about the Convert-A-Ball Kwik Gate Bed Extender, part # KG54-Red. The representative informed me that he installed a Kwik Gate Bed Extender on his truck directly over his tailgate bed liner. He informed me that you could install it over the bed liner or trim the bed liner to install part # KG54-Red. I would recommend trimming the bed liner to install part # KG54-Red. The product you selected, part # KG54-Red comes in red. For the same size,
  view full answer...


• Fit of Topline Bed Extender on 2010 Toyota Tacoma
• Yes, the Topline Bed Extender # BX4004-02 will work on your 2010 Toyota Tacoma.
  view full answer...


• AMP Research Bed X-Tender for 2001 Ford Ranger XLT
• According to our friends at TopLine, part # BX4004-02 is compatible with your 2001 Ford Ranger.
  view full answer...


• Will Topline Bed Extender, # BX4004-02 Fit a 2001 Ford Explorer Sport Trac with Tonneau Cover
• The Topline Bed Extender, # BX4004-02, should fit the 2001 Ford Explorer Sport Trac, even with a tonneau cover. The bed extender does not require the use of the bed rails for installation, so it should not interfere. The silver model is # BX4004-01.
  view full answer...


• Will Topline Bed Extender BX4004-01 Fit on a 2007 Toyota Tundra with a Bedliner
• You should not have a problem installing the # BX4004-01 bed extender on your 2007 Toyota Tundra, but you will probably need to trim away some of the bed liner in order to install the mounting brackets. The bed extender installs using two mounting brackets, one on each side of the tail gate. The bed liner trimming should be minimal, as these would basically be the only two points that would be obstructed. To get a visual of where you might need to trim, I recommend taking a look at the
  view full answer...


• Will the Convert-A-Ball Kwik Gate Bed Extender and Tailgate Step Fit My 2006 Silverado HD 2500 Truck
• The item you selected, the Convert-A-Ball Kwik Gate Bed Extender and Tailgate Step - 57 Inch Wide, part # KG100 will work if your tailgate is at least 57 inches wide. You will want to measure your tailgate to see if it is that wide. If the tailgate is at least 57 inches wide than part # KG100 will work on your 2006 Chevy Silverado 2500 HD pickup truck. Without seeing the vehicle I would guess that it would work as the bed dimensions for the Chevrolet Silverado have not changed drastically ove
  view full answer...


• Will a Bed Extender Transfer from a 2002 Toyota Tacoma to a 2007 Toyota Tacoma
• All of the Bed Extenders that we carry (see link) are compatible with the 2002 and the 2007 Toyota Tacoma. If you have a bed extender from a different manufacturer it may or may not fit depending on how that manufacturer mounts their extender in the bed of the truck.
  view full answer...


• Will Topline Bed Extender, part # BX4004-01, Fit 2009 Toyota Tacoma Double Cab Short Bed
• The Topline Bed Extender for the 2009 Toyota Tacoma, part # BX4004-01, will work on your 2009 Toyota Tacoma Double Cab Short Bed. I have a AnchorTrax Truck Bed and Trailer Cargo Control System w/ Sliding Tie-Downs - 1 foot Long, # AT3375, that might work for a stronger tie-down in the front of your truck bed. It is (2) one foot long tracks that attach to the bed and has adjustable D-rings for different cargo sizes. The rings have a 3,000 lbs. break strength and a 1,000 lbs. load limit. It co
  view full answer...


• Do You Have Cargo Control Solutions for a 2000 GMC Sierra Stepside Bed Style Pickup Truck
• We have two options available for you that will fit your 2000 GMC Sierra step side bed, part # BX4004-01 or part # BX4004-02 are silver and black bed extenders that will effectively extend your bed size, and offer smaller area at the back of the bed when the tailgate is closed, to keep items from sliding around.
  view full answer...


• Which Bed Extender Will fit My 2005 Dodge 2500 Long Bed Truck
• The Topline Bed Extender, part # BX4004-02 for the black finish, or part # BX4004-01 for the silver finish is the correct model for your 2005 Ram Pickup. This is a universal-fit item, and will telescope to fit truck beds of differing widths.
  view full answer...


• Bed Extender for a 2007 Chevy Silverado Crew Cab New Body
• We offer several bed extenders for your Silverado. For instance, the Top Line Bed Extender, part # BX4004-01 for silver or part # BX4004-02 for black would be a great choice. This extender will fold flat against the inside of the tailgate when not in use. When folded, the extender will allow full use of your truck bed. To see the entire list of extenders available for your truck, use the link below.
  view full answer...


• Topline Bed Extender for 2008 Dodge Ram Includes All Parts Needed for Install
• The Topline Bed Extender, part # BX4004-02 includes all necessary hardware for installation on your 2008 Dodge Ram.
  view full answer...