Expert Answers about Trailer Hitch
Trailer Hitch Recommendation for a 2013 Mercedes GLK- First, if you are curious about the Hidden Hitch model we do have it as well, # 87636. This is the newest version and I have been assured it will fit. Regarding the Curt trailer hitch # C13142 I checked the latest information Curt had available and they are listing this hitch as a fit for the 2010 to 2013 GLK. If given the choice I would go with the Hidden Hitch model because if you wanted to use a bike rack or cargo carrier, Curt requires the use of a stabilization strap, # 18050, whereas Hidde
view full answer...
- Will the Hidden Hitch part # 90350 fit a 2002 Mercedes-Benz ML320
- I checked with Hidden Hitch and the Hidden Hitch part # 90350 that your referenced is confirmed to fit your 2002 Mercedes-Benz ML320 SUV.
I attached installation instructions for you to check out.
This hitch weighs 21 lbs.
view full answer...
- Will Draw-Tite Hitch # 75087 Fit 2002 Mercedes-Benz M Class
- Yes, the Draw-Tite Hitch # 75087 will fit your 2002 Mercedes-Benz M-Class.
I have attached a short installation video that shows this hitch being instlled on a 2003 Mercedes-Benz M-Class for your review.
If you will be towing and need a wiring harness I recommend the Curt wiring kit # 56146KIT which includes the tester. I have also attached a short installation video of this as well. You might also need a ball mount, such as Draw-Tite # 2923 as well as a trailer ball. For a 1-7/8 inch tra
view full answer...
- Does Curt Trailer Hitch Receiver # C11030 Fit 2012 Mercedes-Benz C300
- I spoke to my technical contact at Curt and he confirmed that this 1-1/4-inch Class I hitch receiver, part # C11030, will fit your 2012 Mercedes-Benz C-300. This hitch is rated for 200 lbs tongue weight (TW) and 2000 lbs gross towing weight (GTW).
The hitch is offered without a ball mount (for example, as for use with a hitch-mount bike carrier) as part # C11030. If you will be towing a trailer, if you wish you can select this hitch receiver with a ball mount included. We offer the receiver w
view full answer...
- Trailer Hitch and Wiring Harness for 2012 Mercedes-Benz ML350 Blue TEC
- Curt classifies the difficulty level of the installation as 'moderate'. They tell me that a professional installer should be able to complete the installation in roughly 40 minutes to an hour. For a do-it-yourselfer, the install time will depend on you mechanical ability.
To determine if the install is something you would feel comfortable attempting, take a look at the install instructions that I have linked you to.
None of our suppliers offer a trailer wiring harness that is compatible w
view full answer...
- Installing a Trailer Wiring Harness on a 2001 Mercedes M-Class 320
- To find the correct wiring on your 2001 Mercedes M-Class 320, you will need to use the included circuit tester that came with the wiring harness, # 56146KIT, or # 119176KIT, in order to find the correct wires on the tail light wiring harnesses. I have included a link to a video that will show you the procedure. The video is a guide only since it is a different year and model M-Class.
Since there is no plug and play T-connector harness available, you will have to use a hardwire type of harness
view full answer...
- Will Hidden Hitch Trailer Hitch 87593 Fit a 2013 Mercedes GLK-350
- I spoke with my contact at Hidden Hitch and he assured me that trailer hitch # 87593 is a fit for the 2013 Mercedes GLK-350. I have included links to the instructions and a link to a video showing a typical installation for you.
If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For wiring use # C56200KIT.
view full answer...
- Installation of Curt Trailer Hitch 11820 on a 2004 Mercedes E320 Wagon
- I have included a link to the installation instructions for Curt trailer hitch # 11820 that explains how you would go about loosening things up to get the hitch installed so that should help. we have not had the opportunity to install this hitch on a vehicle like yours so I do not have any additional tips for the process. Given that the hardware is intended for one-time installation I do recommend replacing it using # RHK. Enter the hitch number and manufacturer where indicated on the RHK page t
view full answer...
- Does Rear Bumper Door Get Removed When Installing a Trailer Hitch on a 2001 Mercedes ML320
- The hitch receiver on all of the hitches for the 2001 Mercedes ML320 including # 13018 will extend beyond were the rear fascia door is. The door will either need to be trimmed to fit around the receiver or it will need to just stay off of the vehicle. I have included a link to the installation instructions for you to view.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip and a carrying bag. For trailer w
view full answer...
- Hitch and Wiring Recommendation for a 2012 Mercedes Sprinter Van
- For a hitch for your 2012 Mercedes-Benz Sprinter van with a 144 inch wheelbase and a step bumper you would want the Curt Trailer Hitch Receiver # 13358 that you referenced.
For a 2011 Sprinter van with a 144 inch wheel base without a step bumper you would want a Curt Hitch # 13255.
For trailer wiring you would want a Tow Ready Custom Fit Vehicle Wiring Harness # 119176KIT. This will work on Sprinter vans with and without step bumpers. Check out the installation instructions and video I att
view full answer...
- Bumper Removal Necessary to Install Curt Class I Hitch on 2003 Mercedes Benz C240
- To install the Curt Class I receiver, the bumper on your M/B C240 will need to be temporarily removed in order to drill holes.
To see the installation instructions, click on the provided link.
view full answer...
- Bike Rack Recommendations for a Mercedes C350 Coupe/BMW 3 Series Coupe
- I checked on the 2011 Mercedes C350 and there are no hitches available for the coupe models. The # C11030 that you referenced will work on the sedans but not the coupes.
Since I do not know what year BMW 3 series you have I can not say for certain if a hitch is available. Email me back and I will let you know if there is one available.
I checked and the Thule Raceway 2 Bike Carrier # TH9001 will work on your C350 and every generation of BMW 3 Series coupes so I believe it would be a good c
view full answer...
- Hitch and Wiring Recommendation for a 2012 Mercedes Sprinter Van 2500 w 170 Wheelbase
- Since your 2012 Mercedes-Benz Sprinter with a 170 inch wheel base does not have a step bumper you would want the Curt Trailer Hitch # 13255.
The Curt Hitch # 13358 that you referenced would not work for you because it is designed for vehicles with step bumpers and you do not have one.
For wiring I would recommend you get a Tow Ready Custom Fit Vehicle Wiring # 119176KIT. I attached installation instructions and an installation video for this product for you to check out also.
view full answer...
- Availability of Hitch to Fit 2012 Mercedes ML350 Bluetec Diesel
- The two hitches I have available for the 2012 Mercedes ML350 are the Draw-Tite Class III 2-Inch Hitch, part # 75749, and the Hidden Hitch Class III 2-Inch Hitch, part # 87624. Neither one will fit a 2012 ML350 Diesel version or a vehicle with the Air Suspension Package.
At this time we do not offer a trailer hitch to fit the diesel version of the 2012 Mercedes ML350.
view full answer...
- Trailer Hitch and Bike Rack Recommendations for a 2006 Mercedes-Benz E350 Wagon
- We carry two Class I Curt trailer hitches, # C11701 and # 11820, for your 2006 Mercedes-Benz E350 Wagon. I would recommend the Curt Trailer Hitch, # C11701, because it has the highest towing and tongue weight capacity between the two hitches and it is the most cost effective.
I have attached product links and installation instructions to both hitches for you to check out. Please note that Curt requires the use of a support strap, # 18050, with all hitch mounted accessories.
We have a wid
view full answer...
- How to Remove the Rear Bumper to Install Curt Hitch # C11744 on 1999 Mercedes-Benz E320 Sedan
- The steps to remove your rear bumper are detailed in step two of the installation instructions that I have attached for you.
First, you will temporarily remove plastic panel on inside edge of tire well by removing two screws and pulling out retaining clips. Under this panel there are three bumper retaining nuts recessed in the rear panel. Note: mounted to the inside surface of the bumper fascia are cellular telephone antennas on both left and right sides.
Next, carefully slide antennas o
view full answer...
- Trailer Hitch and Installer Recommendations for a 2011 Mercedes ML350
- The Hidden Hitch trailer hitch # 87755 will fit your 2011 Mercedes ML350. I have included a link to the installation instructions for you to view and/or to take with you when you have it installed.
A trusted mechanic or shop that works on trailers can install the hitch for you. If there is an RV dealer nearby, they could also do the installation. And if there is an authorized Hidden hitch, Reese, or Draw-Tite dealer in your area, you can check with them.
view full answer...
- How Does Curt Trailer Hitch # C11823 Install on a 2001 Mercedes S 600
- The Curt trailer hitch # C11823 installs onto the vehicle using steel support plates that come with the hitch. It bolts through the spare trunk pan and to the plates which will be inside of the trunk. I have included a link to the installation instructions for you to view.
If you plan on doing some towing the hitch does come with the correct ball mount, hitch pin and clip. For a ball use # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch. For wiring, use # 56146KIT. I have included a l
view full answer...
- Stabilization Strap for Curt Trailer Hitch # 13018 on a 1999 Mercedes ML430
- The stabilization strap that is mentioned on the product page for hitch # 13018 and in the instructions, see link, is # 18050. The strap is designed to reduce some of the stress on the hitch for items like bike racks and cargo carriers when used.
view full answer...
- Is Bumper Fascia Modification Required to Install Hidden Hitch Trailer Hitch on a 2011 GLK-350
- The Hidden Hitch Class III Trailer Hitch, # 87593, and the Draw-Tite Class III Max Frame Hitch, # 75698, are designed by the same manufacturer and will require the same installation procedures.
Removing or bending of the tabs on the bumper fascia is only necessary if they interfere with the installation of the hitch. There will be two tabs that you will see on the left and right side under the bumper fascia near the exhaust pipes. They may push against the left and right sides of the trailer
view full answer...
- Does the Bumper have to be Removed from a 1999 Mercedes ML320 to Install Draw-Tite Trailer Hitch
- You do not have to remove the bumper structure exactly from the 1999 Mercedes ML320 in order to install trailer hitch # 36258. You just have to temporarily remove the plastic fascia that covers the actual metal bumper and other components. It is actually not very difficult and I have included a link to the installation instructions for you to view.
This is a Class II trailer hitch so you will need to make sure that the bike rack you use will fit in a Class II trailer hitch with a 1-1/4 inch r
view full answer...
- Will the Curt Trailer Hitch With Drawbar Fit on a 2005 Mercedes-Benz E320 CDI
- I spoke with my contact at Curt and he said the Curt Trailer Hitch with Drawbar, # C11701, will fit on your 2005 Mercedes-Benz E320 CDI with dual exhaust. The mounting points for this trailer hitch do not interfere with the exhaust during installation.
You may also be interested in purchasing a Curt Wiring Harness for the 2008 E-Class by Mercedes-Benz, part # 56146, # 55151, Hitch Ball with 1-7/8 inch Diameter, part # 19256, or a Hitch Ball with 2 inch Diameter, part # 19258, to complete you
view full answer...
- How Does the Curt Trailer Hitch Install on a 1989 Mercedes 300TE
- The Curt trailer hitch, # 11806, bolts to special brackets included with the hitch. These brackets will be attached to vertical metal panels in the rear cargo area of the vehicle in the spare tire well on the 1989 Mercedes 300TE, TD, or E320. I have included a link to the installation isntructions for you to view.
The hitch comes with a ball mount, hitch pin and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring, use # 119176KIT. I have included a li
view full answer...
- Removing Rear Bumper for Installation of Hidden Hitch Trailer Hitch on 1998 Mercedes-Benz M-Class
- You will not have to remove the entire bumper before installation of the Hidden Hitch Class III Trailer Hitch, # 87469, however, you will have to move the rear fascia. The Hidden Hitch trailer hitch will have the same installation instructions as the Draw-Tite Max-Frame Class III Trailer Hitch, # 75087.
I have included the installation instructions for both trailer hitches for you to check out.
If you plan on doing any towing, then you will want to pick up a few other items as well. We c
view full answer...
- Are There More Detailed Instructions Showing Draw-Tite Class III Installed on 1998 Mercedes ML320
- We have not had the opportunity to install the Draw-Tite on a 1998 Mercedes ML320, so we unfortunately do not have an installation video to show you.
I have looked over the instructions, and despite the 10 out of 10 installation difficulty rating, I believe that if you have average mechanical ability, you should be able to complete the install without any problems.
On a 1998 model, it appears that there are only 4 bolts holding the bumper fascia in place. Once those are removed, you can pu
view full answer...
- What Can a Trailer Hitch be Used For on a 2011 Mercedes G-Class
- A trailer hitch on any vehicle can be used for towing a trailer, bike racks, or cargo carriers. If you have a trailer to tow, the Curt trailer hitch, # C13010, can handle up to 4,000 pounds gross trailer weight and 400 pounds tongue weight. Consult the vehicle owners manual to determine the towing capacity of the vehicle.
If you want to use a trailer hitch mount bike rack or cargo carrier, this hitch has a 2 inch trailer hitch receiver, so you will need to choose an accessory that can be use
view full answer...
- Will the Curt Trailer Hitch C11030 Fit a 2010 or 2011 Mercedes C-Class Sport or Luxury Sedan
- The Curt trailer hitch, # C11030, fits all models of the 2010 or 2011 Mercedes C Class sedan, despite ride height. I have included a link to the installation instructions for you to review. The hitch comes with the correct ball mount, hitch pin, and clip. You will just need to furnish a properly sized ball. You can use # 19256 for a 1-1/4 inch or # 19258 for a 2 inch diameter.
For trailer wiring, you will need top obtain a harness from a dealership. Mercedes does not license their wiring for
view full answer...
- Trailer Hitch Recommendation for a 2011 Mercedes ML350 BlueTECH Model
- We do have one trailer hitch that is listed as a fit for a 2011 Mercedes ML350 BlueTECH model. Take a look at Curt trailer hitch # C13102. This model was designed to fit the BlueTECH edition. I have included a link to the installation instructions for you to view.
If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring use # 56146KIT. I have included a link to the in
view full answer...
- Where does a Trailer Hitch Install on a 1985 Mercedes 300D
- The Curt trailer hitch # 11614 attaches to the trunk floor and bumper beam on a 1985 Mercedes 300D. I have included a link to the installation instructions for you.
This is a Class I trailer hitch rated for 1,500 pounds gross trailer weight and 150 pounds tongue weight. You must be very cautious of the items you use with this hitch because it has a lower capacity than other hitches. Be certain to consult the vehicles towing capacities which should be located in the owners manual.
view full answer...
- Curt Hitch Recommendation for a 2007 Mercedes E350 Wagon
- I checked with Curt and this Curt Trailer Hitch Receiver # C11701 will work on your 2007 Mercedes-Benz E-350 wagon.
I attached installation instructions for this product for you to check out also.
To complete your towing setup you may also be interested in a Curt Trailer Wiring Kit # 56146KIT (installation instructions attached) and a Hitch Ball with 1-7/8 inch Diameter # 19256.
If you plan on transporting any non-trailer loads, such as a bike rack or cargo carrier, you will also want t
view full answer...
- Drilling is Needed to Install a CURT Trailer Hitch on a 2006 Mercedes C-230, Can It Handle a Boat
- According to the installation instructions for CURT Trailer Hitch, # 11824, which I have linked for you to view, you will need to drill a total of 4 holes to install the trailer hitch. Two holes will go through a cross member under the car and the other two in the bumper beam. (There is actually a 5th hole that will be drilled but it is for routing bolts for installation.)
The gross trailer weight capacity of this trailer hitch is 2,500 pounds, which is more than enough to handle the 1,800 bo
view full answer...
- How will the Draw Tite Class III Hitch Look When Installed on a 2011 Mercedes-Benz R Class R350
- I have a drawing, see link, that shows where the receiver will be positioned after installation of the Draw-Tite Class III Hitch, # 75470, on a 2011 Mercedes-Benz R-Class, but we have not had the opportunity to install this hitch on a Mercedes R350 yet.
The receiver on this hitch is attached at the bottom of the cross tube, so the cross tube will be concealed by the plastic rear fascia and the only parts that will be visible are the receiver and the safety chain loops that are attached to the
view full answer...
- Does the Rear Fascia of a 2003 Mercedes ML350 Need to Be Trimmed to Install Draw Tite Hitch # 36258
- To install this Draw-Tite Trailer Hitch Receiver # 36258, you will need to either have the rear fascia door removed or have it trimmed before it can be reinstalled on your 2003 Mercedes ML350. I attached installation instructions for this product for you to check out also.
You may be interested in the following products to complete your towing setup:
Class II Drawbar # 36071
Hitch Ball with 2 inch Diameter and Short Shank # 19258
Hitch Ball with 1-7/8 inch Diameter and Short Shank # 1925
view full answer...
- Is the Muffler in the Way for Installing the CURT Hitch on a 2000 Mercedes C280 with 202 Chassis
- The CURT trailer hitch, # C11815, will not cause you to remove or relocate the muffler on your 2000 Mercedes C280, with 202 Chassis as long as the muffler is in the factory location.
The hitch attaches to the bottom of the frame rails and has backing plates that fit inside the C-channel frame for added support. I have attached a copy of the installation instructions for you to review.
If for some reason your vehicle has the muffler positioned below the frame rail, where the hitch needs to
view full answer...
- Is Trimming of Bumper Required for CURT Trailer Hitch # C13102 on 2011 Mercedes-Benz GL 450
- I contacted our representative at CURT about installing the CURT Trailer Hitch # C13102, on your 2011 Mercedes-Benz GL450. He informed me that there should be no trimming required to install the hitch even with plastic fascia.
I have attached a picture of the hitch installed on a model with the decorative aluminum fascia. You will want to compare the fascia to see if it is the same size and shape.
However, if the exhaust heat shields are coming in contact with the hitch, the heat shields
view full answer...
- Trailer Hitch and Bike Rack Recommendations for a 1995 Mercedes E-320 Class Station Wagon
- According to CURT, the correct trailer hitch for a 1995 Mercedes E-320 class wagon is # 11806. This hitch comes with a ball mount, hitch pin and clip.
This is a Class I trailer hitch so you will be limited to bike racks that are compatible with a Class I hitch and only 2 bikes. I recommend the Swagman Trailhead, # S63360. This bike rack is compatible with a Class I hitch, has anti-sway cradles, and has the ability to tilt down for greater access to the rear of the vehicle. I have included a
view full answer...
- What is the Purpose of the Stabilizer Strap That is to be Used On CURT Class I Hitches
- The strap you are referring to is the Curt Bike Rack Strap # 18050. It helps provide extra security to hitch mounted bike racks when using hitch mounted accessories.
The strap provides additional support to the rack and would help prevent additional wear on the hitch and your vehicle when using hitch mounted accessories such as a bike rack. The hitch is stable, but the strap will more offer more stability, and failure to use a strap will void the warranty of the hitch.
I attached installat
view full answer...
- Recommend Trailer Hitch To Carry 1-1/4 Inch Bike Rack On 2011 Mercedes-Benz M-Class
- I do have a solution for you to carry your bike rack, but you will need to use a 2 inch hitch. At this time all of the hitches available for your 2011 Mercedes-Benz M-Class are Class III 2 inch hitches.
What you can do is use the hitch you selected, Hidden Hitch Trailer Hitch, part # 87755, and the Hitch Adapter # 80300, which will allow you to use a 1-1/4 inch bike rack.
However, when using a hitch adapter, the tongue weight of your hitch is reduced by half, in your case your tongue weigh
view full answer...
- Can Curt Trailer Hitch # C11030 Handle a Jet Ski Towed by a 2011 Mercedes C-Class Sedan
- The Curt Trailer Hitch, # C11030, for the 2011 Mercedes C-Class Sedan has a gross trailer weight capacity of 2,000 pounds and a tongue weight capacity of 200 pounds. As long as the combined weight of the jet ski and trailer does not exceed either of those capacities it will be able to tow the load. I have included a link to the installation instructions for you to view.
The hitch comes with a ball mount, hitch pin and clip. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diam
view full answer...
- Trailer Hitch Recommendation for a 2011 Mercedes G550
- We have started carrying the Curt Trailer Hitch, # C13010, that will fit your 2011 Mercedes G550. I have included a link to the installation instructions for you to view.
If you plan on doing any towing, the recommended ball mount is # 2923 and you can use pin and clip # PC3. For a ball you can use # 19260 (1-7/8 inch diameter) # 19247 (2 inch diameter) or # 19287 (2-5/16 inch diameter).
Orders can be placed on line by clicking the Add to Cart button on each product page for the products
view full answer...
- Are Extra Parts Needed to Use a Bike Rack on Curt Hitch # C13010 on 2010 Mercedes-Benz G-Class
- The Curt Class III 2 Inch Hitch, part # C13010 will fit your 2010 Mercedes-Benz G-Class vehicle. A hitch ball is only needed if you will be towing a trailer. The hitch ball is located on a ball mount that fits into the trailer hitch. It is where the trailer coupler would connect to the trailer hitch. A hitch ball is not needed if you will only be using the hitch for a bike rack.
Since you will be using the Curt hitch for non-trailer loads like a hitch bike rack, you will need to use a stabil
view full answer...
- Removing Rear Bumper To Install Draw-Tite Trailer Hitch # 75736 on 2007 Mercedes ML350
- I did some research on the internet and found that some of the bolts may be behind plastic tabs on your 2007 Mercedes-Benz ML350. The rear bumper may also have safety cables attached to the rear mud flaps. You will also have to remove a center fascia bracket that is pictured in the instructions. When you slide the rear bumper off, it will need to be slid straight back, as there are tabs that the bumper slides into to attach to the vehicle.
I have linked instructions for the Draw-Tite Trailer
view full answer...
- Trailer Hitch Recommendation for a 2011 Mercedes E350 Sedan
- We do have a trailer hitch for the 2011 Mercedes E-350 sedan. Take a look at Curt Trailer Hitch, # 11001. I have included a link to the installation details for you to view. If you plan on doing some towing, the hitch does come with the recommended ball mount. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter).
Trailer Hitch # C11030 that you have referenced is designed to fit 2008 - 2010 Mercedes-Benz C-Class Sedans so it will not fit a 2011 E-Class.
view full answer...
- Curt Hitch # C11701 Recommendation for a 2008 Mercedes-Benz E-Class
- This Curt Trailer Hitch Receiver with Drawbar, part # C11701, is designed to fit all of the 2008 Mercedes-Benz E-Classes except the Sport model. So as long as yours is not a Sport E-Class this hitch would work well for you.
I attached a link to the installation instructions for this product below for you to check out. It looks like some fascia tabs will get unbolted from the body, but you will not need to remove the bumper.
You may also be interested in purchasing a Curt Wiring for the 200
view full answer...
- Is Bumper Modification Required to Install a Trailer Hitch on a 2011 Mercedes GLK 350
- The rear bumper on your 2011 Mercedes GLK 350 should not have to be modified in order to install Draw-Tite Trailer Hitch, # 75698. However, you may need to bend or remove some tabs on the rear fascia to install the hitch properly. This is covered in the installation instructions I have linked for you to view.
For trailer wiring on higher end European vehicles such as your GLK, I recommend using the Mercedes part and having the dealer install it to avoid any potential problems they may come up
view full answer...
- Installation Difficulty of Curt Trailer Hitch # C11751 for a 1999 Mercedes SLK-230
- I can certainly provide a link to the installation instructions for the Curt Trailer hitch, # C11751, for your 1999 Mercedes SLK-230. We base the difficulty scale on the estimated time it would take to install the trailer hitch. The C11751 hitch requires drilling which increases the estimated time.
If you plan on doing any towing, the hitch comes with the recommended ball mount. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring Upgraded Circuit P
view full answer...
- Trailer Hitch Recommendation for a 1981 Mercedes-Benz 300TD Wagon
- According to Curt Manufacturing, the only hitch that will fit the 1981 Mercedes 300TD Wagon is # C11805. The hitch you have referenced, # 11614, will fit the 1977 to 1985 Mercedes 230, 240D, 280CE, 280E, 300CD, 300D Coupe and Sedan with the 123 chassis.
The C11805 trailer hitch comes with the recommended ball mount, pin, and clip, and you can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you would need Upgraded Circuit Protected Modulite with 4 Pole
view full answer...
- Installation Instructions Link for Draw-Tite Trailer Hitch # 75376 for a 2009 Mercedes ML350
- I certainly can provide a link to the installation instructions for Draw-Tite Trailer Hitch, # 75376, for your 2009 Mercedes ML350 below. We have estimated the difficulty of installing this hitch at a 5 out of 10. Difficulty is measured in terms of how long the installation should take for a novice installer. We estimate it should take about 50 minutes with all the proper tools and perhaps an assistant.
The installation does included some drilling (see step 7 in the instructions linked below
view full answer...
- Installation Instructions for Draw-Tite Class III Recevier Part # 75087 on 2004 Mercedes ML350
- If you will use the provided link, you will be redirected to the installation instructions for the Draw-Tite Class III receiver hitch for your 2004 Mercedes ML350.
We also offer a Curt Class III Hitch, part # 13018. It has a lower tow rating at 3500 lbs versus the 5000 lb for the Draw-Tite model, but the installation is much simpler. I will also provide a link to the install instructions to this hitch, as well.
view full answer...
- Recommendation For a Trailer Hitch That Will Fit 2006 Mercedes-Benz ML350
- The item you selected, Hidden Hitch Class III Trailer Hitch, part # 87755, is the hitch I would recommend for your 2006 Mercedes Benz ML350. This is a Class III Hitch, with a 2 inch receiver that is compatible with most accessories such as cargo carriers or bike racks. This is the highest rated hitch available for your 2006 Mercedes-Benz ML350 for towing.
In addition to part # 87755, you may need the following to complete your towing setup:
Ball Mount part # 2923,
Pin and Clip part
view full answer...
- Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # 87413
- You will not need to cut the OEM bumper for installation of the Hidden Hitch Trailer Hitch, item # 87413, for the 2008 R350 by Mercedes-Benz. You will need to cut the plastic trunk pan cover in one place, if you have a vehicle with cross bracing member, and in 3 places, if your vehicle does not have the cross bracing members. The cut areas are under the vehicle and will not be visible when the hitch is installed.
The installation instructions, see link below, show exactly where to cut the pla
view full answer...
- What is the Overall Width of the Curt Trailer Hitch # 13707
- The overall width of the Curt Class III Trailer Hitch, item # 13707, is 51-1/8 inches.
The on center width of the holes farthest back on the vehicle (closest to the rear bumper) measure 49-1/4 inches apart, plus or minus 1/8 inch.
The on center width of the holes farthest forward when mounted under the vehicle are 46-3/4 inches apart.
We have several hitches available for the 2006 Mercedes-Benz M-Class, I have added a link to those below.
view full answer...
- Curt Trailer Hitch for 2005 Mercedes Benz 4matic E500 Wagon and Wiring Kit Needed
- We do offer a wiring kit that will work with your vehicle, the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, part # 119176KIT, which is linked below. There is not a plug and play wiring kit available for your Mercedes Benz 4matic E500 Wagon at this time.
view full answer...
- Will Hidden Hitch Trailer Hitch, # 87755, Fit On 2010 Mercedes ML350 And What Wiring Harness Is Used
- Yes, I do have the installation instructions for the Hidden Hitch Trailer Hitch, # 87755, for the 2010 Mercedes ML350. I am sending a link to the instructions.
This hitch will not fit a 2010 Mercedes ML350 with the air suspension package.
The car dealer will have to do the trailer wiring harness. Mercedes does not allow any company to make a wiring harness for the M-Class vehicles.
If you are towing with the hitch you will also need the Draw-Tite Ball Mount, # 2923, Pin and Clip, # PC
view full answer...
- Ball Mount Included with Trailer Hitch # 11830 Accepts 2 Inch Ball on a 1999 Mercedes E-Class Wagon
- Yes, you can get a 2 inch trailer hitch ball for the Curt Class I Trailer Hitch Receiver with Drawbar, # 11830. The ball mount that comes with the trailer hitch requires a ball with a 3/4 inch diameter shank. Take a look at Hitch Ball with 2 inch Diameter and Medium Shank, # TR63822. This ball has a capacity of 3,500 pounds of gross trailer weight and 350 pounds of tongue weight. Make sure you stay within the capacities of the trailer hitch and your 1999 Mercedes E-Class Wagon.
view full answer...
- Trailer Hitch, Ball Mount, Hitch Ball, and Hitch Lock Recommendations for a 2007 Mercedes ML350
- Yes, the Hidden Hitch Class III Trailer Hitch Receiver, # 87755, is one of three hitches available for your 2007 Mercedes ML350. I have included a link to the instructions below.
We also carry the Curt, # 13342, and the Draw-Tite, # 75376, that will also fit your vehicle. The only exceptions for any of the 3 available hitches is that they will not fit models equipped with the air suspension package or the 63 AMG model.
None of the hitches come with a ball mount. So you might also be intere
view full answer...
- Availability of Trailer Wiring and Hitch for a 2003 Mercedes ML350
- Yes, we have the trailer wiring components needed to install a 4-Way trailer wiring harness on your 2003 Mercedes ML350. You will need the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, item # 119176KIT. This kit includes all of the parts needed to install the wiring on your vehicle along with a circuit tester to find the correct circuits to splice to. The wiring for your vehicle requires that a power wire be ran to the positive post of the battery through an inline f
view full answer...
- Recommended Hitch For 1986 Mercedes 560 SEL Sedan To Pull Lightweight Camper
- The Curt Class I Trailer Hitch, item # 11711, does not require any stabilizers and comes with all hardware needed for mounting the hitch on your Mercedes S-Class. This hitch has a tow rating of 2,000 pounds and a tongue weight rating of 200 pounds. You will need to check your vehicles tow ratings, see owners manual or dealer, before towing to see if the vehicle tow rating is high enough to pull the trailer you want to tow.
This hitch is a bolt on installation but does require drilling for ins
view full answer...
- Is Drilling Required for Installation of Hitch on 2004 Mercedes ML 350
- No, the Mercedes ML320/ML430 Class II Trailer Hitch, item # 36258, does not require drilling for installation.
Some Items you may need with the Class 2 hitch are the following.
Ball Mount # 36071 (use in drop position only)
Hitch Ball # 19256 or # 19258
Hitch Lock # RH2-XL
Vehicle Wiring # 119147KIT
view full answer...
- What is the Weight Rating of Mercedes-Benz ML500 Class III Draw-Tite Trailer Hitch 75087
- The Mercedes ML500 Class III Draw-Tite Trailer Hitch, part # 75087, has a maximum gross trailer weight (fully loaded) rating of 5000lbs and a maximum tongue weight rating of 500lbs.
You can take a look at the installation instructions at the link provided.
view full answer...
- How Hidden is Curt Trailer Hitch C11701 for a 2006 Mercedes-Benz E-350
- The manufacturers design the hitches to be as concealed as possible. Much of the cross tube will be hidden in the underside of your 2006 Mercedes-Benz E-350. You can get a variety of hitch covers to change the look of your receiver opening. We offer a great selection of hitch covers that you can use to customize your receiver opening. You can see what is available by using the link that has been provided below. Just make sure if you choose to add a hitch cover that you select one that will fit 1
view full answer...
