Expert Answers about Gooseneck

• Andersen Ultimate 5th Wheel Connection Option for a 2011 Chevy Silverado with Drawtite Gooseneck
• I would go with the Andersen Ultimate 5th Wheel Connection # AM3225 to adapt the Fold-Down Gooseneck Trailer Hitch # 8339-4456 that is in your truck bed to a fifth wheel trailer. This product basically just connects to the gooseneck ball and then provides an attachment point for a fifth wheel trailer. Check out the review video I attached for this product.
  view full answer...


• How Does Curt Gooseneck Trailer Hitch and Install Kit C615-632 Attach to a 2009 Chevy Silverado
• The Curt gooseneck trailer hitch # C615-632 bolts to rails included with the installation kit and the rails are attached to brackets that bolt to the outside of the truck frame rails. I have included a link to the instructions for you and a picture that is basically a diagram showing how it attaches to the truck.
  view full answer...


• Reese Fifth Wheel Rail to Gooseneck Hitch Adapter # RP58079 Recommendation for a 1996 C2500 Chevy
• The Reese Above-Bed Gooseneck Trailer Hitch Adapter # RP58079 that you referenced should install in the fifth wheel rails you have in the bed of your 1996 Chevy Truck and provide you with a gooseneck hitch. My sister uses this product in her truck and it works well. I attached a review video for this product for you to check out also.
  view full answer...


• Will the Blue Ox Diamond Hitch # DH1303 fit a 1997 Chevy K1500
• I checked with Blue Ox and the Blue Ox Diamond Hitch # DH1303 that you referenced is a confirmed fit for your 1997 Chevy K1500 with a short bed.
  view full answer...


• Blue Ox Gooseneck Hitch Install Video for a 2013 Chevy Silverado
• We do have an installation video for the Blue Ox Diamond Hitch # DH1308 in a 2012 GMC Sierra that will be very similar to your 2013 Chevy Silverado 3500 HD. I attached it for you to check out. Your exhaust will go back to its original location using the original brackets and hangers once the installation is complete. Step 17 of the installation instructions that I attached mention this. The locking mechanism does not use a lot of moving parts that could easily get corroded. Basically, the
  view full answer...


• Location of Center of Hide-A-Goose Gooseneck Ball on a 2005 Chevy Silverado 1500 Z71
• First, on a 2005 Chevy Silverado 1500, you would need to use # 9465-54. The installation kit for the hitch your referenced is not designed for the 1500. For 9465-54 the measurement is 44-3/4 inches from the rear edge of the bed forward. See instructions link. The ball should be centered in most every case either directly above the rear axle or a few inches in front of the rear axle. Any further back than this and the truck will ride high in the front causing steering and braking problems.
  view full answer...


• Fit of Reese Elite Series Under Bed Gooseneck Hitch # RP30158-68 on 2013 Chevy Silverado 3500
• GM stopped using the C/K name after the 2000 model year, so I am assuming you are speaking of a 2013 Silverado 3500 Dually. According to my contact in the tech services department at Reese, the Elite Series Under-Bed Gooseneck Rail and Hitch Kit you referenced, part # RP30158-68 is indeed compatible with your 2013 Silverado 3500 Series Dually Diesel. If you do not already have a 7-way connector installed in your truck bed, you can install one using part # PK11893-11932. If at some time
  view full answer...


• How Difficult is the Installation of the Remove-A-Ball Gooseneck Hitch on a 2012 Chevy Silverado HD
• The level of difficulty for the installation of the Draw-Tite Remove-a-ball Gooseneck Hitch, # 6300-4456, on your 2012 Chevrolet Silverado HD is going to depend on the experience and mechanical ability of the installer. There is no welding required to install this hitch, however, there will be some drilling and cutting of the truck bed and heat shield required to install this hitch. I have attached the installation instructions for the Remove-a-Ball hitch and the rail kit for you to check ou
  view full answer...


• Blue Ox Gooseneck Hitch Recommendation for a 2002 Chevy Silverado
• I did some checking and the Blue Ox Gooseneck # DH1301 that you referenced will work on your 2002 Chevy Silverado 3500 with an 8 ft bed and dual rear wheels. I attached installation instructions for this product for you to check out also.
  view full answer...


• Gooseneck Rail Kit and Hitch Recommendation for a 1988 Chevy V30
• I spoke to my contact at Curt and he informed me that the only gooseneck option they have for you setup would be to go with a Universal Gooseneck Rail Kit # C61502 and then a Folding Ball Gooseneck Hitch # C-52. I attached installation instructions for both products for you to check out.
  view full answer...


• Draw-Tite Gooseneck Trailer Hitch Recommendation for a 1996 Chevy 3500 Truck
• Yes, actually the Hide-A-Goose Underbed Gooseneck Trailer Hitch with Installation Kit # 9465-40 that you referenced is confirmed to fit your 1996 Chevy 3500 single axle. Check out the installation instructions I attached for this hitch also.
  view full answer...


• Gooseneck Ball Location with Curt Gooseneck Trailer Hitch Installed on a 2001 Chevy Silverado 2500HD
• According to the instructions for Curt gooseneck hitch # C630-652, which I have linked for you, on a long box the center of the gooseneck ball hole will be 47 inches back from the back of the truck cab. On a short box it will be 35 inches.
  view full answer...


• Will the Blue Ox Diamond #DH1303 fit a 1991 K2500 Light Duty 6 Lug Pickup with 6-1/2 ft Bed
• Yes, the Blue Ox Diamond Gooseneck Hitch, # DH1303, will fit on your 1991 Chevrolet K2500 pick up with a 6-1/2 ft bed and 6 lug wheels as long as it does not have a flareside/stepside bed. The brackets with this hitch do not require any drilling into the truck frame for installation and this hitch is rated to meet the manufacturers tow ratings. Before towing a gooseneck trailer using this hitch and your truck you should check the towing capacities of your truck.
  view full answer...


• How Much will Elite Series Under-Bed Gooseneck # RP30158-68 Extend into Bed of 2012 Silverado 3500
• I spoke with my contact at Reese regarding your question. He tells me that housing around the socket for the gooseneck ball will essentially be flush if your bed has a spray-in bed liner. If you do not have a spray-in liner, the housing will extend about 3/16 to 1/4 inch above the bed. Keep in mind that the pucks for the Elite fifth wheel hitch will extend about 1/2 inch into the bed.
  view full answer...


• 5th Wheel Installation Kit and Gooseneck Plate Recommendations for a 2001 Chevy Silverado 2500
• The universal 5th wheel installation kit # RP30035 does fit in the 2001 Chevy Silverado. And the above bed gooseneck hitch # RP58079 fits in the rails. However with a short bed you might need to use # 49080 because it can be mounted in the rails with the ball further back to allow for more clearance between truck and trailer. I have linked instructions for you.
  view full answer...


• Valley Stow-A-Ball Gooseneck Hitch and Install Kit for 2004 Chevy Silverado 2500HD
• Valley does not have an install kit for the V69663 that would be compatible with your truck. For your 2004 Silverado 2500HD, you would want to go with the # V69644 Stow-A-Ball hitch and the # V69854 install kit. The install kit includes all necessary hardware to complete your installation. Draw-Tite also offers the Invert-A-Ball Gooseneck Hitch, part # 9465-34, which is a bit less expensive. You would also need the wiring harness, part # 20110 to provide a 7-way connector in the truck bed.
  view full answer...


• Where is the Gooseneck Ball Hole Location in the Bed of a 2007 Chevy Silverado 3500 Long Bed
• According to the instructions for gooseneck trailer hitch # 9465-34, on a long bed 2007 Chevy Silverado, new body style, the hole for the ball will be drilled 49-3/8 inches measuring from the rear edge of the bed forward. I have linked the instructions for you to view. You will need a hole saw link # 58381 to drill the hole.
  view full answer...


• Gooseneck Trailer Hitches for a 2011 Chevy Silverado Short Bed and 1988 Alperlite Trailer
• There are numerous gooseneck hitch options depending on the series truck you have (1500, 2500HD, or 3500). I have included a link to the gooseneck hitch main page for your truck. Just select the correct series/bed size combination to see the available options. In terms of clearance issues, some of the hitches can be used with an offset ball to provide a few more inches of clearance. And the shape of many gooseneck trailers (a V-shape at the front) actually helps with clearance on short bed tr
  view full answer...


• Will the Draw-Tite Hid-A-Goose Underbed Gooseneck Hitch Fit on a 1998 Chevrolet 1500 6-1/2 ft Bed
• According to Draw-Tite the Hide-A-Goose Underbed Gooseneck Hitch, # 9465-40, will fit on your 1998 Chevrolet 1500 with the 6-1/2 ft bed as long as it does not have a stepside or flareside bed. At this time we do not have a gooseneck trailer hitch if your truck has a stepside or flareside bed. I have attached the installation instructions of this hitch for you to check out. Since you have a short bed, you may be interested in a gooseneck hitch ball with a 5 inch offset like part # 19308.
  view full answer...


• Where is the Gooseneck Ball Hole Located in the Bed of a 2008 Chevy Silverado 2500HD Long Bed
• On the Draw-Tite Hide-A-Goose, # 9465-34, for the 2008 Chevy Silverado, the center of the gooseneck ball hole will be 49-3/8 inches forward of the rear edge of the truck bed (not the tail gate. I have included a link to the instructions for the hitch and installation kit for you to compare to your truck to determine fit.
  view full answer...


• Does Draw-Tite Gooseneck Trailer Hitch # 9465 Come w/Installation Hardware for, 2005 Chevy Silverado
• The hitch comes with hardware but you will need the correct underbed installation kit. We do have all of these parts together, # 9465-34. It comes with all the parts needed for installation. I have included links to the installation instructions for you to view.
  view full answer...


• Gooseneck Hitch for a 2012 Chevrolet 3500 HD Dually
• We have quite a few gooseneck hitches that will fit your 2012 Chevrolet 3500 HD dually. The Blue Ox Diamond Gooseneck Trailer Hitch, # DH1308, that you referenced will work well with your truck and has an underbed design which will give you full use of your truck bed when you are not towing. This hitch will fit trucks with single or dual rear wheels. I have attached the installation instructions and an installation video for you to check out. The truck in the video is different from your truc
  view full answer...


• Installation Kit for a Curt Gooseneck Trailer Hitch for a 2011 Chevy Silverado 2500 Long Bed
• The correct installation kit for a 2011 Chevy Silverado 2500 is # C60604. It will fit with the Curt Double Lock, Flip and Store gooseneck hitch; Curt Quick Goose 2 gooseneck hitch; or Curt Underbed, Folding gooseneck hitch. You might also be interested in the installation tool, # C60606, to make installation even easier. I have linked instructions for the tool and the installation kit.
  view full answer...


• Can You Install a Gooseneck Hitch on a 1998 Chevrolet 2500 with a 3 Inch Body Lift
• The problem with putting a gooseneck hitch in a truck with a body lift is that the gooseneck hitch mounts to the frame, and as you know a body lift will lift the body higher off of the frame. Well, a gooseneck hitch installs onto the frame and the ball height is set for vehicles without a body lift. So, if you were to install a hitch on a truck with a body lift the ball will not stick up far enough through the body for a gooseneck coupler to attach to it. With a body lift you will not be a
  view full answer...


• Where do 5th Wheel Rails Install on a 1997 Chevy K2500
• The brackets will install onto the frame of your 1997 K2500, to determine exactly where you will need to find the correct location of the rails for the hitch and then install them in relation to where the rails will need to be installed. To determine the location of the rails you will need to measure 30-15/16 inches from the rear of the truck bed to the rear edge of the rear hitch rail if you have an 8 ft bed and 26-3/16 inches if you have a short bed. Check out the installation instructions
  view full answer...


• Will Blue Ox Gooseneck Hitch # DH1301 Fit a 2003 Chevrolet Silverado 3500 With TruckCraft Flatbed
• The Blue Ox Underbed Gooseneck Hitch, part # DH1301, will only fit on a 2003 Chevrolet Silverado 3500 Dually models. The Blue Ox Underbed Gooseneck Hitch, part # DH1302, will only fit on the Chevy 3500 single rear tire models. The hitch mounts to the truck frame and uses existing holes in the truck frame. It only requires a 4 inch diameter hole in the truck bed. I will not be able to tell you if the Blue Ox gooseneck hitch will fit on your truck with the TruckCraft Aluminum Flatbed, but
  view full answer...


• Gooseneck Hitch for 2008 Chevy Silverado Crew Cab with 5-1/2 Foot Bed
• For a 2008 Silverado Crew Cab with the 5-1/2 foot short bed, the Curt Gooseneck Hitch and Install Kit # C615-632 is indeed the correct gooseneck hitch. For install details, click the provided links.
  view full answer...


• Does Draw-Tite Gooseneck Trailer Hitch 9465-34 Come w/Install Kit for 2007 Chevy Silverado Classic
• If your 2007 Chevy Silverado Classic is a 2500 series, then you can use gooseneck trailer hitch # 9465-34 and it does come with the correct installation kit to install it on your truck. If you have a different series truck, you will need a different hitch/installation kit combo. I have included a link to the gooseneck hitch main page for a 2007 Chevy Silverado Classic. Just click on the link from the list that represents your truck to see the available options. The hitches come with the inst
  view full answer...


• How Does the Draw-Tite Hide-A-Goose Gooseneck Trailer Hitch Install on a 2012 Chevy Silverado 1500
• There should be some holes in the truck frame on a 2012 Chevy Silverado 1500, you just may not be able to see them unless you know where to look. I have included a link to the installation instructions for the install kit and for the hitch portions. Compare these locations in the instructions to your truck to determine if your truck does have the mounting locations specified. The u-bolts you see are actually for safety chains from the trailer to the hitch. For a short bed truck I also reco
  view full answer...


• Does the Ball Lock Into Place when Upside Down in Draw-Tite Hide-A-Goose Gooseneck Trailer Hitch
• I called and spoke with my contact at Draw-Tite to confirm. When turned upside down in the Draw-Tite gooseneck trailer hitch, # 9465-34, the ball simply rests inside of the cavity, the handle does not lock it into place. The hitch does come with a magnetic cover, see picture, to cover the hole so it is not exposed. I have also included some instruction links for you.
  view full answer...


• Replacement Ball for a Blue Ox Diamond Under-Bed Gooseneck Trailer Hitch
• We do carry replacement balls for the Blue Ox Diamond under-bed gooseneck trailer hitches. You will need # BX62-3604. This is a standard 2-5/16 inch diameter ball and it is uniquely designed to specifically fit the Blue Ox Diamond hitches.
  view full answer...


• Ball Hole Location When Installing a Draw-Tite Gooseneck Trailer Hitch on a 2005 Chevy Silverado
• Normally, the center of the gooseneck ball will be directly above or slightly forward, within an inch or 2, of the center of the axle but it is possible that on some trucks it could be more forward. On the 2005 Chevy Silverado, the instructions, linked for you, state that the hole should be 44-1/2 inches from the rear of the bed on a short box, and 49-3/8 inches on a long box. The measurements are from the end of the bed, not the tailgate, to the center of the hole. If you measure on your tru
  view full answer...


• Is Drilling Required for Blue Ox Gooseneck Trailer Hitch Installation on a 2012 Chevy Silverado
• Installation instructions for the Blue ox gooseneck trailer hitch # DH1308 are provided as a link on the product page and I have also linked them here for you. While there is some drilling involved (through the bed), the instructions do not indicate any drilling required into the frame. The instructions do call for the use of Loctite, # LT37420.
  view full answer...


• What is the Height of the Ball in the Curt Quick Goose 2 Gooseneck Trailer Hitch, # C630-652
• On the Curt Quick Goose 2 Gooseneck Hitch, # C630-652, the ball will be approximately 3-1/2 inches from the bed to the top of the ball. I have included a link to the installation instructions for this hitch for you to view. If you are currently using a gooseneck plate in 5th wheel rails, you will need to completely remove the 5th wheel installation kit including the underbed brackets in order to install the gooseneck hitch. The gooseneck requires the same mounting areas on the truck as a 5th
  view full answer...


• Gooseneck Trailer Hitch Recommendation for a 2001 Chevy Silverado 3500 with 5th Wheel Trailer Hitch
• In order to add a gooseneck trailer hitch to your 2001 Chevy Silverado 3500, you will need one that fits in the above the bed rails that your 5th wheel hitch uses. We have several options available and I have included a link to them for you. Curt makes a model, the Spyder, # 16085, that you may like. I have included a link to the installation details for you. The Reese gooseneck, # 8339-4445, will not mount to the underbed portion of the installation kit on your truck. It requires its own
  view full answer...


• How to Unstick a Stuck Ball in a Curt Quick Goose 2 Gooseneck Trailer Hitch
• I have some solutions for you to try to get that troublesome Quick Goose, # C630-652, unstuck. I spoke with my contact at Curt and he said that usually the ball gets stuck down as opposed to up. What he suggested first is to go underneath the truck where the hitch is installed and clean and lubricate all of the moving parts of the hitch. Then, try to move the levers and other moving parts back and forth to get the ball to move. If you can free the ball, make sure to clean inside the cavity w
  view full answer...


• Will the Blue Ox Diamond Gooseneck Hitch Transfer from a 2002 to 2007 Chevy 2500HD with 6.5 Foot Bed
• If you have the Blue Ox Diamond gooseneck hitch, # DH1301, in your 2002 Chevrolet Silverado 2500hd with 6.5foot bed, you will be able to install it in a 2007 Chevrolet Silverado 2500hd with 6.5foot bed, as long as the truck has the old body style. If your 2007 Chevrolet Silverado has the new body style you will need the gooseneck hitch you referred to, # DH1304, for the 2500hd with 6.5foot bed. I added a photo showing the difference between the old and new body style for you.
  view full answer...


• Will Curt Gooseneck Flat Plate # C65500 Fit a 2001 Chevrolet Silverado Towing a 8,000-Lb Trailer
• I spoke with Curt and they cannot give an exact weight rating for the Curt Gooseneck Flat Plate, part # C65500, when used without the Curt Folding Gooseneck Ball Rail Kit, part # C61502. They said it can be installed without the rail kit, but you will need to use a minimum of six 1/2 inch Grade 5 mounting bolts to be able to meet the weight capacity of your 8,000-lb horse trailer. The Curt gooseneck flat plate will have a gross towing weight capacity of 30,000 lbs when used with the Curt # C6
  view full answer...


• Will Blue Ox Underbed Gooseneck Hitch # DH1303 Fit a 1996 Chevrolet 1500 With 8 Foot Bed
• The Blue Ox Underbed Gooseneck Hitch, part # DH1303, will fit your 1996 Chevrolet C/K 1500 Truck with 8 foot bed. This hitch has a 30,000-lb gross towing weight capacity and a 7,500-lb tongue weight capacity. It is also recommended to use Loctite Threadlocker 262, part # LT37420, on all of the bolts when installing the Blue Ox gooseneck hitch.
  view full answer...


• Will the Blue Ox Diamond Gooseneck Trailer Hitch Fit in a 1996 Chevrolet Pickup with 8 Foot bed
• Yes, you can use the Blue Ox Diamond hitch underbed gooseneck, # DH1303, on your 1996 Chevrolet C/K Series Pickup. Blue Ox recommends the use of Loctite, # LT37420, when installing their hitches. You may also want to consider the 90-degree wiring harness, # 54701-003, to retain the use of your vehicle factory 7-way connector at the rear of the truck and have a connection in the bed for the gooseneck trailer.
  view full answer...


• Heat Shield Trimming on a 2007 Chevrolet 2500HD Short Bed for Gooseneck Trailer Hitch Installation
• On your 2007 Chevy Silverado, if you have a Classic body style or New body style, there are different Blue Ox diamond hitches available. If you have a new body style 2500HD short bed, the correct hitch is # DH1304. To install this hitch, you do have to remove part of the heat shield on the passenger side of the truck. On some models, the whole heat shield will need to be removed. If you have a 2500HD Classic body style, the correct hitch is # DH1301. While it is possible that the heat shield
  view full answer...


• Blue Ox Diamond Gooseneck Hitch Recommendation for a 1989 Chevrolet 3500 K Series Long Bed Pickup
• The # DH1102 and # DH1201 Blue Ox Diamond gooseneck hitches are essentially the same item, the difference is the design of the attachment hardware. The # DH1102 hitch fits several models of the Dodge Ram trucks and the # DH1201 hitch fits several models of the Ford trucks. For your 1989 Chevrolet 3500 K series truck you will need the Blue Ox Diamond hitch, # DH1303, which has mounting hardware specifically designed for your truck. I have added a link that shows all of the gooseneck hitches
  view full answer...


• Can You Install a Gooseneck Hitch on a Truck with a Body Lift
• The problem with putting a gooseneck hitch in a truck with a body lift is that the gooseneck hitch mounts to the frame, and as you know a body lift will lift the body higher off of the frame. Well, a gooseneck hitch installs onto the frame and the ball height is set for vehicles without a body lift. So, if you were to install a hitch on a truck with a body lift the ball will not stick up far enough through the body for a gooseneck coupler to attach to it. With a body lift you will not be a
  view full answer...


• Will The Blue Ox Diamond Hitch Gooseneck # DH1303 Fit My 1998 Chevrolet K1500 z71 Truck
• I do have a Gooseneck hitch available that will fit your 1998 Chevrolet K1500, but the item you selected, Blue Ox Diamond Hitch Gooseneck, part # DH1303, will not fit. For a gooseneck hitch, I would recommend the Reese Remov-A-Ball Gooseneck Trailer Hitch, part # 6300-4440. This hitch will fit your K1500 and will fit both the 6 and 8 foot bed models. You will have no problem installing this on your truck with the 3/4 ton springs and axle. Our representative at Blue Ox informed me that the
  view full answer...


• What is the Mounting Tab Spacing for Reese Above-Bed Gooseneck Trailer Hitch
• The center to center distance between the mounting tabs on the Reese Above-Bed Gooseneck Trailer Hitch, # RP58079, is 10 inches. Front to back it is 21-13/16 inches. On a set of Reese rails, it will fit into the center most set of mounting holes. I have included a link to the installation details for you to view. If you need a 5th wheel installation kit for your 2004 Chevy Silverado, you can use # RP50064-58 (for all models except an 8 foot bed 1500 HD, use # C16418-204 if you have this model
  view full answer...


• Availability of Gooseneck Hitch for 2007 Chevrolet Silverado 2500 HD Short Bed
• I do have some below the bed gooseneck hitches available for your 2007 Chevrolet Silverado 2500 HD Short Bed truck, but the Reese Hide-A-Goose Underbed Gooseneck Trailer Hitch, part # 9460 will not work on your vehicle. There are three, below the bed gooseneck hitches that will work on your vehicle. They are listed below. Curt Double Lock, Flip and Store Gooseneck Hitch with Installation Kit, part # C600-652 Curt Quick Goose 2 Gooseneck Hitch with Installation Kit, part # C630-652 Blue O
  view full answer...


• How Does the 4 inch Hole for the Gooseneck Ball Get Cut for the Blue Ox Diamond Hitch # DH1307
• To cut out the 4 inch hole for the gooseneck ball of the Blue Ox Diamond Hitch # DH1307 you will need to use a 4 inch hole saw kit with a power drill to cut a hole in the truck bed. Hole saw kits can be found at local hardware stores.
  view full answer...


• Gooseneck Ball Placement, Elite Series Under-Bed Gooseneck Hitch # RP30158-68, 2011 Chevy Silverado
• When the Elite Series Under-Bed Gooseneck Complete Hitch, # RP30158-68, is installed on your 2011 Chevy Silverado 2500HD, the center of the gooseneck ball will be 45-3/4 inches from the rear edge of the bed on long bed models. On short bed models, it will be 42-1/2 inches. I have included a link to the installation instructions for this hitch that contain the measurements listed above along with many others that you may find useful.
  view full answer...


• Recommendation for a Under Bed Gooseneck Trailer Hitch for a 2006 Chevy Silverado 2500HD Long Bed
• Gooseneck Trailer Hitch, # 9460, will not fit, but you can use Reese Fold Down Ball, # 8339-4434, instead for your 2006 Chevy 2500HD long bed. I have included a link to the installation details below. The Fold Down Gooseneck Hitch Installation Template, # 6425, will make installation much easier.
  view full answer...


• Options For Towing A Fifth Wheel And A Gooseneck Trailer With a 2004 Chevy Silverado Short Bed
• Yes, the Draw-Tite Gooseneck Plate, # 49080, will attach to your Reese above-bed rails and give you a gooseneck connection. The plate is rated for 25,000 gross towing weight, but the capacity will be determined by your installation kit and the above-bed rails. The hitch ball on the gooseneck plate is offset from the center of the plate. If you install the plate on your rails with the hitch ball towards the rear of your truck the measurement from the center of the hole in your rear rail to th
  view full answer...


• Will The Pro Series 25K Gooseneck Plate fit into Reese Fifth Wheel Rails on a 2004 Chevy Silverado
• Yes, the Pro Series Gooseneck plate will fit into the Reese rails. All Reese, Curt, Draw-Tite, Hidden Hitch and Valley brand fifth wheels use essentially the same rails and spacing so that gooseneck plates and fifth wheels are pretty much interchangeable. Remember, the tow capacity will be limited the tow capacity of your install kit and rails.
  view full answer...


• Above the Bed, Fold Down Goose Neck Trailer Hitch Recommendation for a Chevy Silverado 2500HD
• The Fold-Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4431, is for light duty Chevy and GM 1500 short and long beds and 2500 light duty short beds. Since you have a 2500HD, you will need Fold Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4434. I have included a link to the installation details for this hitch below. If you want to use the gooseneck hitch to tow the 5th wheel Montana trailer, you will need a 5th wheel to gooseneck adapter. We have numerous options fo
  view full answer...


• Will Fold Down Gooseneck Trailer Hitch with Installation Kit # 8339-4434 Fit a 2010 Chevy Silverado
• I spoke with my contact at Reese and he stated that the Fold Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4434, will fit a 2010 Chevy Silverado as long as it is a 2500 or 3500. I have included links to the installation details below.
  view full answer...


• Which Gooseneck Hitches Will Fit a 2001 Chevrolet Silverado 3500 4x4 with Extended Cab
• If you want a fold down ball you need part # 8339-4445. It is a custom fit hitch for your truck and will not require you to drill the frame. You will still need to drill or cut the bed for the ball and safety chain loops. This particular kit is designed to work to the vehicle manufacturer tow rating, so check your owners manual. I have included a link to the installation instructions for this hitch for you to view.
  view full answer...


• Best Quality Gooseneck Trailer Hitch for a 2009 Chevrolet Silverado 2500 with a 6ft Bed
• Any of the Reese gooseneck hitches would be well-suited for your application, but the # 8339-4434 gooseneck would be a good choice, as it is rated at 25,000lbs towing capacity, and will install using the included below bed rails, so you will retain use of your bed when not towing and with the ball folded down. I have included links to the installation instructions so you can determine if the installation is something you would want to do yourself. I do recommend adding the template, # 6425, w
  view full answer...


• Gooseneck Hitch Installation Location on a 2003 Chevrolet 2500 HD 2WD 6 Foot Bed
• When installing the CURT Double Lock, Flip and Store Gooseneck Hitch, item # C600-652, the center of the ball will be installed at 44-1/4 inches from the rear or the bed and centered between the wheel wells. The center of the ball should end up around 1-1/2 inches forward of the center of the rear axle. The ball position can be slightly adjusted by loosening the mounting hardware but the size of the hole cut in the bed for the hitch ball would need to be enlarged to do this. I have posted
  view full answer...


• Will Fold Down Gooseneck Hitch Part # 8339-4434 Fit my 2009 Chevrolet 2500HD 6 Foot Bed
• Fold-down Gooseneck hitch and Install Kit part # 8339-4434 will fit your 2009 Chevrolet Silverado 2500 6 foot bed. We do not yet have a video of this particular kit being installed. I have included links to the instruction for the kit you were interested in, part # 8339-4434..
  view full answer...


• Weight of Reese Elite Series Gooseneck Hitch # RP30845 and Reese Elite Series Install Kit # RP30061
• The weight of the Reese Elite Series Gooseneck Hitch, part # RP30845, is 61 pounds. Along with this item you would need the Reese Elite Series Installation Kit, part # RP30061 for your 2004 Chevrolet Silverado. The installation kit weighs 55 pounds. I am including links to the installation instructions on the Reese hitch and the installation kit.
  view full answer...