Expert Answers about Accessories and Parts

• Where to Attach Curt Stabilization Strap for Trailer Hitch Mount Bike Rack on 2011 Hyundai Tucson
• In some cases, you need to open the rear hatch in order to get the hook into the gap. Do this first before installing the rack and bikes. If you still cannot get the hook in place, you can try an alternate location such as a roof rack if your Tucson is equipped with one. You can also try the gap at the side of the rear hatch rather than at the top if your Tucson has that spoiler behind the antenna. Another possibility is to put the hook in the gap between one of the side doors and the bod
  view full answer...


• Will the Yakima RailGrab Roof Rack Pin Adapters # Y8880201 Fit a 2012 Audi Q7
• Yes. I checked with Yakima and the Pin Adapters, # Y8880201, will fit the 2012 Audi Q7. When used on the Audi the RailGrabs require the 48 inch crossbars. If the bars on the Odyssey are shorter then it will not work on the Audi. You would need the 48 inch bars, # Y00408.
  view full answer...


• Which Yakima MightyMounts Will Fit on a 2011 Audi Q5 with Factory Crossbars
• Many Yakima roof mount accessories are listed as a direct fit to the factory crossbars on a 2011 Audi Q5. But, if a MightyMount is needed, you would need Universal MightyMount, # Y03590. I have included a link to the installation details for you.
  view full answer...


• What is the Diameter of the Replacement U-Bolt # 43216 and the Length of the Threaded Section
• The distance from the bottom of the curve to the tip of the bolt is about 3-3/16 inches, and the diameter of the bolt is 5/16 of an inch.
  view full answer...