Expert Answers about Tow Bars parts

Tow Bars

Expert Answers about Tow Bars

Blue Ox Parts Needed to Flat Tow a 2006 Jeep Wrangler
The first thing you are going to need to flat tow your 2006 Jeep Wrangler would be a base plate kit. This provides the attachment point for the tow bars to the vehicle. Since you referenced the Blue Ox Adventurer Tow Bar # BX7322 I would recommend you go with a Blue Ox Blue Ox Base Plates # BX1120. Next you will need some safety cables, for that I would recommend the Blue Ox 7 foot Safety Cables # BX88196. These safety cables are coiled and will get wrapped around the arms of the tow bar.
view full answer...

Parts Needed to Flat Tow a 2004 Chevy Cavalier
Yes, as long as you have a Roadmaster XL Base Plate Kit # 3116-1 then you could flat tow your 2004 Chevy Cavalier with a RoadMaster Tracker Tow Bar # RM-020. To complete your towing setup you may also need the following products: Roadmaster Tow Bar Quick Disconnects # RM-201. These will allow you to quickly and easily attach and disconnect the tow bar from the base plate kit. RoadMaster 68 inch Single Hook, Coiled Safety Cables # RM-643. These are coiled so that you can just wrap them a
view full answer...

Parts Needed to Flat Tow a 2005 Chevy Equinox
I checked with Roadmaster and for your 2005 Chevy Equinox you would want a Roadmaster XL Base Plate Kit # 3127-1 so that you could flat tow your vehicle with a set of tow bars. The RoadMaster Falcon All Terrain Tow Bar # RM-522 that you referenced will work with this base plate kit and comes with quick disconnects and built in safety cable guides so I would recommend you get the RoadMaster 64 inch Single Hook # RM-645 as well. For wiring there are several option, check out the FAQ article
view full answer...

Parts Needed to Flat Tow a 2013 Jeep Grand Cherokee
There are several components needed to flat tow a vehicle such as your 2013 Jeep Grand Cherokee. The first thing you will need is a base plate kit. For that I would recommend you get a Roadmaster EZ Base Plate Kit # 521440-1A. This should work well with the RoadMaster StowMaster Car-Mounted Tow Bar # RM-501 that you referenced. This tow bar comes with quick-disconnects also. Now for safety chains I would recommend you go with RoadMaster 68 inch Single Hook, Coiled Safety Cables # RM-643. T
view full answer...

Parts Needed to Flat Tow a 2013 Chevrolet Sonic Sedan Automatic Behind a Motor Home
Looking at the owners manual online for the 2013 Chevy Sonic, it looks like as long as you do not have an RS model with automatic transmission it can be flat towed or towed on a dolly. If it is an RS automatic you will need to have it on a trailer with all 4 wheels off the ground. If it is not an RS automatic then you can flat tow it using the following 5 components: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates use # 523173-1. The base plates pr
view full answer...

Parts Needed to Flat Tow a 2004 Ford Freestar Behind a Truck
The first thing you are going to want to do is consult the owners manual for the 2004 Ford Freestar to determine if it can be flat towed and if so if there are any special requirements. There are 5 items you will need to flat tow the vehicle. First, you will need base plates to provide the proper attachment point for a tow bar. You can use # 499-1. Then you will need the tow bar. The StowMaster, # RM-581, is a vehicle mount tow bar, which you will need since you will be towing the van with di
view full answer...

Parts Needed to Flat Tow a 1996 Chevy C/K Series Pickup Truck Behind a Motor Home
I am glad you emailed us because there are some things that you need to be aware of. First, the Tow Ready tow bar, # 63180 is only rated for 5,000 pounds and your 1996 Chevy Silverado could easily exceed this capacity. The other problem with the tow bar is that it is only rated for a maximum speed of 45 miles per hour. We need to get you a proper set up. The first thing you are going to want to do is consult the truck owners manual to determine if it can be flat towed and if so what special r
view full answer...

Parts Needed to Flat Tow a 2012 Jeep Liberty Jet Edition Behind a Motor Home
The Blue Ox Alpha tow bar # BX7365 and the Blue Ox base plates for the 2012 Jeep Liberty, # BX1131, are compatible so you can use them together. I have included a link to a video showing a typical installation of the base plates for you. The Jet addition does not affect the fit. The vehicle in the video is a Jet edition so installation on your Liberty will be the same. The Alpha tow bar also comes with safety cables so you will not need to add those. Next you will need a lighting solution. I
view full answer...

Tow Bar, Base Plates and Accessories Needed to Flat Tow 2012 Scion xB
In order to flat tow your xB, you will need a tow bar, base plates, safety cables, a wiring solution to provide lighting for the towed vehicle and a supplemental braking system. The Blue Ox Alpha tow bar you referenced would be a great choice that also includes safety cables. For base plates, the # BX3784 base plate kit is a fit for models equipped with fog lights. A good wiring solution is the LED Bulb and Socket Kit, # BX88267. This kit allows the flat towing wiring to remain completely
view full answer...

How to Connect TowReady Towbar, part # 63180, to a 2010 Jeep Wrangler
A tow bar like the Tow Ready # 63180 connects to the towed Wrangler with vehicle-specific base plates. These plates mount to the vehicle frame and provide two brackets for the tow bar arms to attach. An example of base plates for your vehicle is part # 1432-1, Roadmaster XL Base Plate Kit. To attach this particular tow bar to this particular base plate, an adapter is required, part # RM-025. Please note that his TowReady tow bar is rated up to a maximum of 45 mph. It is often preferable to se
view full answer...

Parts Needed to Flat Tow a 2000 Ford Mustang
After some research, I found that manual transmission Ford Mustangs of the years you provided can be flat towed without disconnecting your driveshaft. You will want to check your vehicle owners manual for confirmation. There are 5 components for flat towing a vehicle: base plates, tow bar, safety cables, lighting, and a supplemental braking system. Lets look at the base plate first. I recommend the Roadmaster XL Base Plates # 466-1. Just to let you know, these plates will not fit the Cobra SV
view full answer...

Tow Bar, Base Plates and Accessories to Flat Tow 2006 Dodge Ram 1500 Mega Cab
As a first step, you will need to confirm with your owners manual or Dodge dealer that your Ram 1500 Mega Cab 4x4 is capable of being flat towed. Remco Towing, who is typically my go-to resource in determining the flat-towability of a given vehicle does not have any information about your vehicle. To flat tow a vehicle, you will need a tow bar, base plates, safety cables, wiring for lighting and a supplemental braking system as mandated by law in most states. The Blue Ox Aventa tow bar you
view full answer...

Parts Needed to Flat Tow a 1995 Jeep Wrangler with a Falcon 5250 Tow Bar
Tow bars are not vehicle specific but the base plates are. You can use the Falcon 5250 tow bar with your 1995 Jeep Wrangler as long as you first install the correct base plates, see link. Either set will be compatible with the 5250 tow bar. You will also need safety cables like # RM-643, a lighting solution, and supplemental braking. Also check the vehicle owners manual for more information on recreational towing of the Wrangler. For lighting there are several possible options. If you wil
view full answer...

Component Parts Needed to Flat Tow a 2010 Ford Edge with a Motorhome
Flat towing your Edge will require the following components: a tow bar, a quick-disconnect bar, vehicle base plates, safety cables, a light wiring system and a supplemental braking system. I have included several helpful FAQ articles concerning flat towing and the components required. The Falcon 2 Tow Bar is manufactured by RoadMaster in several versions. It appears from your photo that you have part # RM-520. Instructions for this part are provided. Your photo shows that the tow bar you have
view full answer...

Flat Towing Accessories for 2001 Ford Focus
In my research, I found that manual transmission-equipped Focus models are capable of being flat towed without modification. I was not able to find any information about automatic transmission models, however. If your Focus has an automatic transmission, please check with your owners manual or with Ford for more information. If you should confirm that your vehicle is indeed capable of being flat towed, you will need base plates, a tow bar, safety cables, a wiring solution so that the tail
view full answer...

Parts Needed to Flat Tow a 1993 Jeep Wrangler Behind a 2007 Chevy Suburban
For the 1993 Jeep Wrangler, we only have base plate options (that connect to the tow bar) if the Jeep has a U-channel bumper. You can use base plates # 1409-3. These base plates are compatible with your Roadmaster Falcon 2 tow bar, # RM-525. In addition to the base plates and tow bar, you will also need safety cables like # RM-643, a lighting solution, and a supplemental braking system. For lighting there are several options. If you will not be towing often then I recommend a magnetic kit
view full answer...

Parts Needed to Flat Tow a 1990 Jeep Wrangler Behind a 2008 Jeep Commander
The two things you will want to do first before towing are to make sure the 2008 Jeep Commander has the capacity to tow 3,000 pounds and consult the Jeep Wrangler owners manual for the proper procedure for towing. For the Wrangler, you will need several parts to flat tow it. First, you will need base plates. There are 2 options depending on what bumper you have. For base plates to fit, you will need to have the U-channel bumper. If you have a different type of bumper it probably would be bes
view full answer...

Needed Tow Bar and Accessories to Flat Tow 2007 Jeep Liberty
In order to flat tow your Liberty, you will need to install a base plate kit. I would recommend the Roadmaster EZ Base Plate Kit, part # 521423-1. A base plate offers a safe and secure attachment point to the vehicle. This particular Roadmaster kit offers easily-removable drawbars. One they are removed, the bracketry is pretty much invisible. If you are mechanically inclined, you might be able to handle the installation, but it is fairly involved. Typically, an RV would have a receiver hitch
view full answer...

What is the Equipment Needed to Tow a 2003 Chevrolet Trailblazer EXT
A tow bar is one of the parts needed to flat tow your 2003 Chevrolet Trailblazer. An installation guide is located on the product page. You will also need a base plate, safety cables, a braking system, and lighting system. I would recommend the RoadMaster Stowmaster Tow Bar # RM-501. With the weight of the Trailblazer being 4600 lbs, this particular bar is effective in the event you decide to pack heavy items within the towed vehicle, increasing its weight while traveling. I have provided a link
view full answer...

Parts Needed to Flat Tow a 2012 Jeep Wrangler Sport Behind a Motor Home
First, there are 5 items you will need to flat tow your 0212 Jeep Wrangler Sport: base plates, tow bar, safety cables, lighting, and supplemental braking. Base plates provide the proper attachment point for a tow bar. Roadmaster has different base plates depending on how the vehicle is equipped, see link. After you select the base plates for your specific model, you will need a tow bar. I recommend the Falcon 2, # RM-520. It is the most popular Roadmaster tow bar. I have linked instruction
view full answer...

Parts Needed to Flat Tow a 2005 Chevy Cobalt Behind a Motor Home
First, according to the research I did, the 2005 Chevy Cobalt is flat towable. Consult the vehicle owners manual to confirm. There are a total of 5 items you will need to flat tow a vehicle: base plates, tow bar, safety cables, lighting, and supplemental braking. Base plates: These provide a proper and secure attachment point on the vehicle for a tow bar. You can use Roadmaster EZ base plates # 523137-1. These will fit models with grille inserts but none of the base plates we carry will fit a
view full answer...

Parts Needed to Flat Tow a 1986 Chevy S-10
In order to use a Falcon tow bar on your 1986 Chevy S-10, you will need to equip the vehicle with base plates first, see link. The base plates provide the safe and secure attachment point required for the tow bar. In addition to the tow bar and base plates you will also need safety cables, like # RM-643 and a lighting solution. I recommend a magnetic light kit like # C-ATL20A because it is cost effective and easy to set up. Most states now require a supplemental braking system on the vehic
view full answer...

Tow Bar, Base Plates, Wiring and Braking System to Flat Tow 2012 Ford F150 4x4
To flat tow your vehicle, you will need a tow bar, base plates that install on the vehicle and provide a connection point, safety cables, a wiring solution and a supplemental braking system. The Blue Ox Aventa would be a great choice. The 360 degree swivel and self-aligning design make hitching the vehicle very easy, even on on terrain that is not pool-table flat. The 10,000 capacity of the Aventa will handle the weight of your F150 with no problem. Safety cables are included with the tow bar
view full answer...

Parts Needed to Flat Tow a 2004 Honda Pilot with a 2013 Jayco Melbourne 28F Motor Home
You have come to the right place. The first thing you are going to want to look at is the vehicle owners manual for the manufacturer recommended towing method and if there are any special recommendations for your 2004 Honda Pilot. There are 5 items you will need to flat tow a vehicle: Base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates, there are several options, see link. If you like the Blue Ox products use # BX2227. These base plates are compatible
view full answer...

Parts Needed to Flat Tow a 2012 Ford Escape Behind a 2012 Ford F-450 Class C Thor Chateau
According to the folks at Remco, in order to flat tow a 2012 Ford Escape you will need a lube pump kit to flat tow the vehicle. Consult the owners manual for more information. After you have the transmission lube pump kit there are 5 items you will need to flat tow the vehicle. First you will need base plates, # BX2605. These base plates are compatible with the certain tow bars, which is the second item you will need. The Alpha, # BX7365, will work with these base plates. The Alpha tow bar
view full answer...

Tow Bar, Base Plates and Accessories to Flat Tow 2008 Saturn Outlook
In order to flat tow your Outlook, you would need base plates, a tow bar, safety cables, wiring and in most states, a supplemental braking system. I would recommend the Blue Ox # BX3330 base plate kit, which would work very well with the Blue Ox Aladdin tow bar, part # BX4325. The Aladdin includes safety cables. There are many different methods of wiring the dinghy so that its lights work in tandem with those of the motorhome, ranging from a magnetic mount system like part # RM-2100 to a h
view full answer...

Parts Needed to Flat Tow a 2012 Ford Focus SE Behind a Motor Home
As long as your 2012 Ford Focus does not have adaptive cruise control, you can use base plates # 524430-1. This base plate kit is compatible with the Tracker Tow bar, # RM-020. I have linked instructions for the tow bar for you. You will also need safety cables, # RM-643, and a lighting solution. I recommend the bulb and socket kit, # RM-155, because you will not have to cut into the vehicle wiring to install it, though you will need to drill holes for the new bulbs in the backs of the tail l
view full answer...

Parts Needed to Flat Tow a 2008 Jeep Rubicon
Without knowing everything you purchased I can just tell you all the parts you will need to flat-tow your 2008 Jeep Rubicon and you can purchase the missing pieces. The first thing you will need is a base plate kit for your vehicle. For that I would recommend you get a Roadmaster XL Base Plate Kit # 1429-1 as long as you do not have any aftermarket bumpers, winches or guards. The RoadMaster Sterling All Terrain Tow Bar # RM-576 that you referenced comes with safety cables, lighting wiring
view full answer...

Parts Needed to Flat Tow a 2010 Chevy Colorado Crew Cab Behind a Motor Home
First, you are going to want to check the owners manual on your 2010 Chevy Colorado to determine if it can be flat towed. I did some research and found that if you have a 2 wheel drive model with the 4L60E transmission, you would need a transmission lube pump kit from Remco to flat tow the truck. If you have a 2 wheel drive manual, the vehicle cannot be flat towed. And if you have a 4 wheel drive automatic or manual it is flat towable as is. Make sure to consult the owners manual to verify t
view full answer...

Parts Needed to Flat Tow a 2012 Jeep Wrangler Behind a Class A Holiday Rambler Arista 300
First, you will want to consult the Jeep owners manual to determine the proper procedure for towing. If you find that you can flat tow the Jeep, there are 5 items you will need to flat tow your 2012 Jeep Wrangler. First, you will need base plates to provide a secure attachment point for a tow bar. For your 2012 Wrangler, if you do not have an aftermarket bumper, you can use Blue Ox base plates, # BX1126. I have included a link to the installation instructions for you. Next, you will need
view full answer...

Parts Needed to Flat Tow a 2003 Pontiac Vibe Behind a Motor Home
I promise not to try to sell you a new car, only what you will need to flat tow the Vibe. The information below is complimentary. If you have an automatic transmission and the vehicle is front wheel drive, you will need to use a tow dolly and I will cover that later. If it is an automatic and all wheel drive it must be towed on a trailer, it cannot be flat towed or carried on a dolly. Now if you a manual transmission you can flat tow it. For all of the above information consult the vehicle ow
view full answer...

What Parts are Needed to Flat Tow a 2012 Chevy Sonic Behind a Class C Motor Home
The first thing you are going to want to do is consult the vehicle owners manual for the proper towing procedure of the vehicle. If it states you can flat tow it then there are 5 items you will need. First, you will need base plates on the vehicle to provide a safe attachment point for a tow bar. You can use EZ2 style base plates, # 523173-1. These base plates are compatible with all Roadmaster tow bars. The most popular tow bar is the Falcon 2, # RM-520 that you have referenced. I have li
view full answer...

Parts Needed to Flat Tow a 2000 GMC Safari Mini Van
In order to flat tow your 2000 GMC Safari Mini Van you will need to purchase a base plate kit that will provide the attachment point for a tow bar like the Tow Ready Tow Bar # 63180 that you referenced. Howver, since this tow bar is limited to 45 miles per hour I would recommend you use a RoadMaster Sterling All Terrain Tow Bar # RM-585. It may cost quite a bit more, but it comes with safety cables, quick disconnects, and tow bar wiring. For a base plate kit you will need a Roadmaster XL Base
view full answer...

Is Supplemental Braking Required When Flat Towing a 2011 Chevy HHR
Most states and Canadian provinces now require supplemental braking on the vehicle being towed by law. There is a good chance that where you will be traveling to or traveling through, a braking system will be required. The easiest system to set up and use is the Roadmaster Even Brake, # RM-9400. You will also need a stop light switch # RM-751428 and a 12 volt outlet kit # RM-9332 to use this braking system on a 2011 Chevy HHR. I have included a link to all of our FAQ articles on flat towi
view full answer...

Installation of Tow Bar Wiring and Even Brake System for Flat Towing 2012 Jeep Wrangler Unlimited
When installing the Roadmaster Even Brake System, part # RM-9400, on your 2012 Jeep Wrangler Unlimited you will need the Roadmaster 12 Volt Outlet Kit, part # RM-9332. This part will connect to your towed vehicle and supply the power for the Even Brake system. For lighting on your 2012 Jeep Wrangler Unlimited, you can wire your vehicle using Roadmaster Diode Wiring Kit, part # RM-154. Another option would be to use Magnetic Towing Light Kit, part # C-ATL20A, which are lights that attach to yo
view full answer...

Base Plates and Flat Towing Accessories for 2006 Buick Rainier and Blackhawk Tow Bar
From the research I did, you will need a transmission lube pump or drive shaft disconnect to flat tow the 2-wheel drive model. For the all wheel drive model you will have to use a transmission lube pump to flat tow. Be sure to consult your owners manual for the proper towing procedure and anything else that may be needed. Once you have determined what you need for your model, you will need compatible base plates to go with the tow bar. You can use the Roadmaster XL base plates, # 3109-1. The
view full answer...

Using 2-1/2 Inch to 2 Inch Receiver Reducer # 58102 to Flat Tow Vehicle
A hitch reducer like the Draw-Tite # 58102 can be used to reduce your hitch opening from 2-1/2 inches to 2 inches so it will accept the shank of your Alpha Tow Bar and allow you to safely tow your Saturn Ion. I went ahead and called my contact at Blue Ox just to make sure, and he confirmed it for me.
view full answer...

Parts Needed to Flat Tow a 1983 Jeep CJ-8 D Scrambler Behind a Motor Home
Actually, yes, the recommendation will be the same for the 1983 CJ-8 Scrambler as it is in the question and answer that you referenced. In order to flat tow a vehicle you will need to install base plates first so the tow bar has something to attach to. For a 1983 Jeep CJ-8 Scrambler, you will need to use Blue Ox base plates, # BX88230. These will actually bolt to the bumper. They need to be bolted to a flat surface on the bumper and in most cases, the bumper will need to be modified and reinf
view full answer...

Parts Needed to Flat Tow a 1985 Jeep CJ-7 Wrangler
In order to flat tow a vehicle you will need to install base plates first so the tow bar has something to attach to. For a 1985 Jeep CJ-7, you will need to use Blue Ox base plates, # BX88230. These will actually bolt to the bumper. They need to be bolted to a flat surface on the bumper and in most cases, the bumper will need to be modified and reinforced to tow the vehicle. You can then use the Adventurer tow bar, # BX7322 that you referenced. Make sure the base plates are spaced 16 to 34 inc
view full answer...

What Parts are Needed to Flat Tow a 2000 Ford Mustang
First, I did some research and found that the manual transmission models of the 2000 Ford Mustang can be flat towed as is but automatic models need a drive shaft coupling to be flat towed. Consult your vehicle owners manual for additional information. If you determine you can flat tow your Mustang you will first need base plates which provide a secure attachment point for a tow bar. For your Mustang you can use XL base plates # 466-1. Please note these base plates will not fit the Cobra SVT m
view full answer...

Parts Needed to Flat Tow a 2012 Ford F150
You are on the right track, the Blue Ox Aventa LX Tow Bar, # BX7445, is a good starting point for flat towing your 2012 Ford F-150. This tow bar includes safety cables so you will not need to purchase those separately. Next, you should check your trucks owners manual for towability and pre tow procedures to make sure it can be flat towed. My information shows that if you have a 2 wd manual transmission, Raptor or SVT, the vehicle is not flat towable. If you have a 4 wd automatic the vehicle w
view full answer...

Parts Needed to Flat Tow a 2001 Ford Sport Trac Automatic Behind a Winnebago Adventurer
To flat tow your 2001 Ford Sport Trac Automatic behind your Winnebago Adventurer with the Blue Ox Alpha Tow Bar, # BX7365, you will need a base plate kit, light kit and supplemental braking system. Typically you would also need a set of safety cables, but they are included with the Alpha tow bar. Please note that if your vehicle is a 4wd automatic, then it is not towable. If your vehicle is a 2wd automatic, then you can use the Blue Ox Base Plate Kit, # BX2166. This base plate kit is comp
view full answer...

Parts Needed to Flat Tow a 2012 Chevrolet Sonic
Before you begin flat towing your new 2012 Chevrolet Sonic, you will want to verify a few things first. If your vehicle has a 1.4 Liter engine and an automatic transmission, then it cannot be flat towed and must be towed using a tow dolly, like part # RM-2000-1. If it has a 1.4L engine and a manual transmission, or has a 1.8L engine and is automatic or manual, then you can flat tow your vehicle. The items that you will need to flat tow your vehicle are a tow bar, base plate kit, wiring harnes
view full answer...

Parts Needed to Flat Tow a 2010 Honda Fit With a Class A Winnebago Journey 34
We have everything that you will need to flat tow your 2010 Honda Fit with automatic transmission behind your Class A Winnebago Journey 34. The Roadmaster Falcon 2 Tow Bar, # RM-520, is a great idea and is one of our most popular tow bars that we sell. You may also be interested in the Falcon All Terrain Tow Bar, # RM-522, as well. I have attached installation instructions and video links for both tow bars for you to compare. The additional items that you will need are a base plate kit, saf
view full answer...

Base Plates and Accessories for Use with a Blue Ox Aventa LX Tow Bar on a 2004 Ford F-150
For a 2004 Ford F-150 XLT, to use the Blue Ox Aventa LX tow bar, # BX7445, you will need compatible base plates, # BX2169. The tow bar comes with safety cables. You will also need a lighting solution for the truck. I recommend the bulb and socket kit, # RM-155, because you will not have to cut into the vehicle wiring. The bulbs are powered directly from the towing vehicle. Most states now require a supplemental braking system on the vehicle being flat towed. I recommend a proportional syst
view full answer...

Parts Needed to Flat Tow a 1997 Chevrolet Astro Van 2WD
For your 1997 Chevrolet Astro Van 2WD we carry the Roadmaster XL Base Plates, # 3138-1. These base plates were designed specifically for your vehicle and include all necessary installation hardware. These base plates do not include a tow bar. I would recommend the Roadmaster Falcon 2 Tow Bar, # RM-520, that you referenced on our website. I have linked a demonstration video of this tow bar for you to check out. You will also need a few other items that I have listed below to flat tow your veh
view full answer...

What Parts are Need to Flat Tow a 2007 Chevy Tahoe Behind a Motor Home
The first thing you are going to want to do is consult the vehicle owners manual to determine if your 2007 Chevy Tahoe can be flat towed and if there are any specific requirements, restrictions, or recommendations. If your Tahoe is a 1500, you will need to use Blue Ox base plates, # BX1676. These base plates are compatible with the Aventa LX tow bar and safety cables, # BX7445. If you have a different model other than a 1500, use Roadmaster base plates, # 3154-1. In order to sue the tow bar w
view full answer...

Parts Needed to Flat Tow a 2012 Ford Focus Behind a Motor Home
There are 5 components needed to flat tow your 2012 Ford Focus and those are a tow bar, base plate kit, safety cables, tow bar wiring and a supplemental braking system. The base plate for your vehicle is the Roadmaster EZ Base Plate Kit, # 524430-1. You will also need safety cables, # RM-645, as they are required by law when flat towing a vehicle. You should not have a problem, but check your tow bar and make sure it is compatible with EZ style base plates. If it is not compatible, then I wo
view full answer...

Parts Needed to Flat Tow a 2012 Chevrolet Equinox with a Blue Ox Alpha Tow Bar
To tow your 2012 Chevy Equinox your first priority would be to have a trailer hitch mounted to your RV that is capable of towing your vehicle. My research shows that the Equinox weighs approximately 4000 lbs, not including fluids and cargo, and that it is flat towable as is. You should also refer to your owners manual to confirm the flat towing procedures for you 2012 Chevy Equinox. The Reese Multi-Fit Motorhome Trailer Hitch, # 82200, may be a good choice if the total weight of your Equinox
view full answer...

Base Plate Recommendation For Flat Towing 1999 Ford F-250 With Blue Ox Aventa LX Tow Bar # BX7445
The Blue Ox Aventa LX Tow Bar, part # BX7445, will be an excellent tow bar to flat tow your 1999 Ford F-250 Super Duty behind a motor home with a 2 inch hitch receiver. It has a weight capacity of 10,000 lbs. You will also want to read your owners manual or check with Ford regarding any other guidelines or modifications necessary so that the vehicle can be safely flat towed. Some vehicles require modifications such as a drive line disconnect, transmission lube pump, freewheeling hubs or axle
view full answer...

Is a Cross Bar Needed to Flat Tow A 2003 Honda Element with a RoadMaster Falcon 5250 Tow Bar
No, a cross bar is not required to flat tow with the RoadMaster Falcon 5250 tow bar if you have the Roadmaster MX Base Plate Kit, # 1541-5, on your 2003 Honda Element. If you have the XL Base Plate Kit, # 1541-1, on your Element then you would need to use a cross bar and quick disconnect system, # 910021-00.
view full answer...

Base Plates, Tow Bar, and Accessories Needed to Flat Tow a 2001 Honda Accord
the first thing you will want to do is consult the vehicle owners manual to determine the proper towing procedure for your 2001 Honda Accord. From what I could find, the vehicle can be flat towed but has not been formally tested. To flat tow a vehicle you will need base plates, a tow bars, safety cables, a lighting solution, and supplemental braking. First, you can use base plates # 1545-1. The base plates provide a safe and secure attachment point for the tow bar. For a compatible tow bar
view full answer...

Parts Needed to Flat Tow a 1997 Ford Escort Station Wagon
You should start by consulting the vehicle owners manual for the proper towing procedure for the Escort. In my research I found that the manual transmission Escort can be flat towed but the automatic transmission models require a transmission lube pump before they can be flat towed. There are 5 items that you will need to flat tow a vehicle. First, you will need to install base plates on the vehicle. The base plates provide a safe attachment point for the tow bar. For a 1997 Ford Escort Stati
view full answer...

Do I Need a Base Plate Kit to Attach Blue Ox Tow Bar to 2010 Jeep Wrangler
Yes, to attach your Blue Ox Tow Bar to your 2010 Jeep Wrangler, you will need to use a base plate kit. The tow bar you have, the Adventurer, part # BX7322, will work with the Blue Ox Base Plate Kit # BX1126, according to Blue Ox. The Blue Ox Base Plate kit will not fit aftermarket bumpers, or bumpers with winches or guards. In addition to a base plate kit and tow bar, you will need safety chains, lighting or wiring, and a supplemental braking kit to flat-tow your Jeep Wrangler. The Roadmas
view full answer...

Parts Needed to Flat Tow a 2012 GMC Sierra 3500HD 4WD
For a base plate kit for your 2012 GMC Sierra 3500HD 4WD truck I would recommend the Roadmaster XL Base Plate Kit # 3167-1, I will send you a separate email with a pdf of the installation instructions for this product for you to check out. This base plate kit would work well with the RoadMaster Blackhawk 2 All Terrain Tow Bar # RM-422 that you referenced. To complete your towing setup you may be interested in a RoadMaster BlackHawk 2 All Terrain Combo Towing Kit # RM-9294-2. And finall
view full answer...

What Do I Need to Flat Tow a 2000 Jeep Wrangler
You will be able to use this RoadMaster Tracker Tow Bar # RM-020 to flat tow your 2000 Jeep Wrangler, but first you will need a base plate kit. I attached a page that has all of the different base plate kits available for your vehicle that are compatible with the # RM-020. You will need to select which bumper style you have and then you will have the correct base plate kit for your vehicle. You will also need a Roadmaster Tow Bar Quick Disconnect Kit # RM-201 to make connecting and disconnect
view full answer...

Parts Needed to Flat Tow a 2011 Toyota Rav4
In order to determine if your 2011 Toyota Rav4 is able to be flat-towed you will need to consult the owners manual of your vehicle to see if there are any restrictions on flat-towing your vehicle. Some vehicles require an axle disconnect, drive line disconnect, transmission lube pump, or free wheeling hubs in order to be flat towed. If you do find that you can flat tow your vehicle the first thing you are going to need is a base-plate kit like a Roadmaster XL Base Plate Kit # 1182-1A. For
view full answer...

Parts Needed To Economically Flat-Tow My 1999 Jeep Cherokee 4x4
I can help you with all the parts you will need to flat-tow your 1999 Jeep Cherokee. To flat-tow your Jeep Cherokee, you will need a base plate kit, tow bar, lighting or wiring, safety cables, and a supplemental braking system. There are a few options for base plate kits on the 1999 Jeep Cherokee that can vary in price but all will work just fine on your vehicle. I would recommend the Roadmaster Classic Base Plate Kit, part # 1418-3. The # 1418-3 Kit will fit all models of the 1999 Jeep Chero
view full answer...

Parts Needed to Flat Tow a 2004 Cadillac Escalade EXT with All Wheel Drive AWD
The 2004 Cadillac Escalade AWD can be flat towed by using a transmission lube pump from Remco Towing. You will also need base plates, a tow bar, safety chains, lighting, and supplemental braking. For base plates, I recommend the Roadmaster XL base plates, # 199-5. These base plates are compatible with numerous Roadmaster tow bars and the draw bars can be removed when not towing the vehicle. For a compatible tow bar, I recommend the RoadMaster Blackhawk 2 All Terrain Tow Bar, # RM-422. The 10,
view full answer...

Base Plates, Lighting, Safety Cables and Supplemental Braking to Flat Tow a 2007 Jeep Wrangler
For your 2007 Jeep Wrangler JK, X model, there are a couple of different base plate options depending on how the vehicle is equipped. If it does NOT have an aftermarket bumper, winch, or guard, you can use # 1429-1. If it does have a Mopar/Warn bumper, use # 1430-1. Both sets of base plates are compatible with the Falcon Tow Bar, # RM-520. In addition to the base plates and tow bar, you will also need safety cables, lighting, and a supplemental braking system in the Wrangler. For safety cable
view full answer...

Tow Bar and Mounting Brackets Needed to Flat Tow a 2001 Buick Century
To tow your 2001 Buick Century behind the 2000 Chevy Venture there are several items that you will need. First and most important, the 2001 Buick Century will need a transmission lube pump to safely be towed behind the Venture. Next, you will need a base plate kit for the front of the Century. The Blue Ox Base Plate Kit, # BX1509, would be a great choice. To attach the base plate kit to your Venture you will need a Tow Bar. If your Venture has a 2 inch hitch, the Blue Ox Alpha Tow Bar, # B
view full answer...

What Parts are Needed to Flat Tow a 2005 Chevy Cavalier
For your 2005 Chevy Cavalier, I recommend the Roadmaster XL Base Plates, # 3116-1. These base plates are compatible with the Tracker Tow Bar, # RM-020, that you have selected. In order to make the arms of the XL base plates removable when using the Tracker tow bar, you will also need quick disconnects, # RM-201. Base plate installation can be an involved task, but if you have experience with automotive projects and all the tools required, you should be able to complete the installation at hom
view full answer...

What Parts are Needed to Use a Tow Ready Tow Bar with Roadmaster Base Plates on a 1992 Geo Tracker
In order to attach the Tow Ready Tow Bar, # 63180, to your Roadmaster base plates, you will need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, # RM-025. This will allow the two different parts to work together. The Roadmaster Quick Disconnect Tow Bar Base Assembly, # 910021-00, is for Roadmaster tow bars so it should not be needed, just the adapter and tow bar listed above. I have included a link to the installation details for the tow bar for you. Keep in mind that the Tow Read
view full answer...

Parts Needed for a Complete Towing Setup for Flat Towing a 1994 Honda Civic
The RoadMaster Tracker Tow Bar, item # RM-020, can be used with all Roadmaster base plate applications. You will need to add a Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201, to the Roadmaster base plates that you select to be able to easily remove the tow bar when not towing the Civic. Base plates for your 1994 Honda Civic are available. For the DX, SI and S and Hatchback models the Roadmaster Classic Base Plate Kit, # 508-1, is the correct fit. For the CX, EX, and LX models the Road
view full answer...

Parts Needed to Flat Tow a 2006 GMC Yukon XL
There are several different base plates available depending on the model 2006 GMC Yukon XL you have. For a 1500 or Denali, use XL Style Base Plates, # 199-5. For a 2500, use # 3115-1. From the research I did, the Yukon has a curb weight of up to 5,770 pounds. With gear loaded in it, it could easily exceed 6,000 pounds. For this reason, I recommend going with a 10,000 pound capacity tow bar like the Roadmaster Blackhawk 2 All Terrain, # RM-422. I have included a link to the installation detail
view full answer...

Tow Bar and Accessories Needed to Flat Tow a 2005 Jetta Wagon, Old Body Style, and 2005 Ford F-350
You will be able to tow your 2005 Jetta Wagon and your 2005 Ford F-350 with the same tow bar. We have two tow bars available which are rated for towing the F-350 so you will need to select one of those. The RoadMaster Blackhawk 2 All Terrain Tow Bar, item # RM-422, or the Blue Ox Aventa LX Tow Bar, item # BX7445, are the correct tow bars for towing the F-350 and are both rated at 10000lbs capacity. You would then need a base plate kit for each vehicle. For the Jetta wagon, you will need th
view full answer...

Parts Needed to Flat Tow a 2011 Chevy Malibu
When flat towing a vehicle, there are 5 main components that are needed. Starting with base plates, for a 2011 Chevy Malibu you can use Roadmaster EZ base plates # 523145-5. The base plates provide a safe and secure attachment point for a tow bar. When choosing a tow bar, you will need one that is compatible with EZ base plates. I recommend the Roadmaster Stowmaster tow bar, part # RM-501. I have included a link to the installation details and a link to a video review for you to view. You can
view full answer...

Parts Needed to Flat Tow a 1996 Toyota RAV4 Behind an RV
In order to flat tow your 1996 Toyota RAV4, all wheel drive with manual transmission, I have found that you will need to have a transmission lube pump installed. For other towing requirements for your vehicle, be sure to consult the owners manual. There are several other components that are needed to flat tow a vehicle starting with base plates. Base plates provide a safe and secure attachment point for a tow bar. You can use XL Base Plates, # 1142-1. For a tow bar, you will need one that is
view full answer...

Parts Necessary To Flat Tow a 2011 Toyota RAV4 Behind a Motor Home
There are 5 components needed to flat tow a vehicle. First, the vehicle will need base plates to provide a safe attachment point for a tow bar. For your 2011 Toyota RAV4, you can use Roadmaster XL Base Plates, # 1182-1A. Second, you will need a compatible tow bar. You can use the Tow Ready Tow Bar, # 63180, but you will need an adapter, # RM-025, and Quick Disconnects, # RM-201, to make the tow bar and base plates compatible, and this tow bar is is rated for towing speeds of 45 miles per hou
view full answer...

Base Plate Kit Needed for a 2011 Honda Fit Sport
Yes, I can help. You will need the Roadmaster EZ Base Plate Kit, item # 521190-1, for your 2011 Honda Fit Sport. This bracket kit is designed to fit all models of the 2011 Honda Fit. Along with the bracket kit you will need a set of car side quick disconnects, item # RM-222, if you did not retain them from your 2003 Suzuki for the the tow bar. You will also need wiring for the Fit. I would recommend using the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, to keep the lighting
view full answer...

Parts Needed To Flat Tow a 2011 Jeep Wrangler Unlimited
From the information I was able to obtain, the 2011 Jeep Wrangler Unlimited does not require a transmission lube pump to be flat-towed. You will still need to check your owners manual or with your Jeep dealer on flat towing the vehicle. Some vehicles require an axle disconnect, drive line disconnect, or free wheeling hubs in order to be flat towed. To complete your towing setup, you will also need a base plate kit, tow bar, safety cables, wiring or lighting, and a supplemental braking system
view full answer...

Parts Needed to Flat Tow a 1987 Honda Civic 4-Door Behind a Motor Home
You will need to check your owners manual or with the Honda dealer to see if your 1987 Honda Civic 4-door can be flat towed. Some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect or free-wheeling hubs before they can be towed. If the correct procedure is not followed it will cause severe damage to the transmission. If you are able to tow your vehicle with your motor home the other parts you will need are the base plates, safety cables, wiring,
view full answer...

What Parts are Needed to Flat Tow a 1989 Chevy Astro 2 Wheel Drive Automatic
I have done a little research and have found that your 1989 Chevy Astro can be flat towed, but it does require a transmission lube pump. A company called Remco makes the part you will need. To verify this, you can consult the vehicle owners manual to determine the proper procedures for flat towing your van. In addition to a pump, some vehicles must be equipped with an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed. In order to flat tow, you will first n
view full answer...

Adapter Needed to Use a Falcon 2 Tow Bar With Blue Ox Base Plates on a 2006 Saturn Vue
Yes, there are adapters you can use to attach your Falcon 2 tow bar setup, item # RM-520, on your Motorhome, to the Blue OX base plate kit , item # BX3317. You can use the Roadmaster Tow Bar to Blue Ox Brackets Adapter, item # RM-031, or the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars, item # BX88151, for your application. Another option would be to go with the Blue Ox Aladdin Tow Bar, item # BX4325, for use with the blue Ox base plates on your Vue.
view full answer...

Parts Needed To Flat-Tow My 1997 Geo Tracker 2 door 4x4
In addition to base plates, tow bar, and wiring, you will also need safety chains and a supplemental braking system to flat-tow your 1997 Geo Tracker 2 door 4x4. The Roadmaster XL Base Plate Kit, part # 118-15, would be a good option for base plates for your Tracker. The XL Base Plate Kit features removable drawbars so that when the vehicle is not being towed, the base plates are less visible. The tow bar you selected, RoadMaster Tracker Tow Bar, part # RM-020, would work to tow your Track
view full answer...

What Would I Need to Flat Tow my 2005 Chevy Aveo
I did some checking and it looks like manual transmission 2005 Chevy Aveos can be flat towed without issue, but the automatic transmission Aveos can not be flat towed. You would have to check your owners manual to see if a tow dolly like a RoadMaster Tow Dolly with Electric Brakes, part # RM-2000-1 could be used. I attached installation instructions below for you to check out also. If you had a manual transmission you could use a RoadMaster Tracker Tow Bar - 5,000 lbs, part # RM-020, like you
view full answer...

Parts Needed To Flat-Tow 1995 Jeep Wrangler Economically
To flat-tow your 1995 Jeep Wrangler, you will need a base plate kit, tow bar, safety cables, vehicle wiring or lights, and a supplemental braking system. The base plate kit I would recommend for your Jeep is the Roadmaster Classic Base Plate Kit, part # 1409-3, which will fit only the U-Channel Bumper, which your Jeep should have. For an economical tow bar, you could use the Tow Ready Adjustable Tow Bar, part # 63180, if the 45 mile per hour limitation is will work for you. To connect the
view full answer...

What Exactly Do I Need to Flat Tow a 1997 Ford Taurus or a 1989 Chevy Astro Van
Along with the RoadMaster Blackhawk 2 All Terrain Tow Bar, item # RM-422, you will need a base plate kit to flat tow the Astro. I did some research and found that, although we have a base plate kit for the 1997 Ford Taurus, item # 445-3, the vehicle cannot be towed because the items needed to make the vehicle tow-able are no longer in production. For the 1989 Chevy Astro Van, the Roadmaster Classic Base Plate Kit - Fixed Arms, item # 101-1, is the correct fit. You will need to add a transm
view full answer...

Everything Needed to Allow Flat Towing of My 2000 Chevy Tracker 4 door Behind Motorhome
You are headed in the right direction. The Roadmaster XL Base Plate Kit, item # 1012-1, will fit your 2000 Chevrolet Tracker, as long as you do not have the factory brush guard option on your vehicle. The RoadMaster Tracker Tow Bar, item # RM-020 will work nicely with the 2000 Tracker that should weigh in at less than 4,000 lbs. To connect the Tracker tow bar to the XL base plate kit and be able to remove the base plate draw bars you will also need the Roadmaster Tow Bar Quick Disconnect Kit, it
view full answer...

What Vehicle Mounting Brackets are Needed to Flat Tow a 2000 Chevrolet Blazer with 4 Wheel Drive
The Roadmaster XL Base Plate Kit with Removable Arms item # 179-2, would be the best choice for towing your 4 wheel drive 2000 Chevrolet Blazer. Along with the Tow Ready Adjustable Tow Bar, 5,000 lbs, item # 63180, you will also need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, item # RM-025, and a Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201, to disconnect the tow bar from the Blazer and be able to remove the drawbars. Keep in mind that this tow bar is rated for towing s
view full answer...

List of Parts Needed to Flat Tow A 2010 Honda CR-V with a RoadMaster Tracker Tow Bar
Along with the Roadmaster Tracker Tow Bar, item # RM-020, you will need a set of base plates for the 2010 Honda CR-V. The correct base plate kit for your vehicle is the Roadmaster XL Base Plate Kit, item # 1559-1. This kit will not work on vehicles with a brushguard installed on the front. You will also need a set of Roadmaster Tow Bar Quick Disconnects, item # RM-201. These will allow you to disconnect the tow bar, cross bar from the vehicle brackets so the brackets can easily be removed.
view full answer...

Parts Needed for Flat Towing a 1993 Ford Explorer
Yes, we have base plates for the 1993 Ford Explorer. You can use the Roadmaster XL Base Plate Kit, item # 449-2. This base plate kit will fit all of the 1993 Explorers including the Eddie Bauer Edition and the XLT, but will not fit the Limited Edition vehicles. To use the Tow Ready Adjustable Tow Bar, 5,000 lbs, item # 63180, with Roadmaster base plates you will also need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, item # RM-025, and a set of Roadmaster Tow Bar Quick Disconnects,
view full answer...

What Towbar and Baseplate Kit are Needed for Towing the 2011 Chevy Equinox
The Roadmaster XL Base Plate Kit - Removable Arms, item # 3160-1A, is the correct base plate kit for your 2011 Chevrolet Equinox. The RoadMaster Sterling All Terrain Tow Bar with 6-Wire Electric Cord - 6,000 lbs, item # RM-576 that you selected would be an excellent choice for towing your vehicle if your motorhome has a 2 inch hitch mounted at the rear. With the Sterling All Terrain Tow Bar and the XL base plate kit you will get the safety cables and the 6 wire wiring needed to span the gap b
view full answer...

What Tow Bar and Mounting Brackets Will I Need to Tow 1987 Suzuki Samurai
There are a few things you will need along with a tow bar to pull your 1987 Suzuki Samurai. First you will need a base plate kit, the Roadmaster Standard Base Plate Kit, part # 1003-1, will fit your 1987 Suzuki Samurai if you do not have a brushguard. If you have a brushguard, you will need to remove it for part # 1003-1, to fit. This base plate kit will go with the hook up style of the tow bar. You will need a tow bar, the Tow Ready Adjustable Tow Bar, part # 63180, will work for your applic
view full answer...

What Is Needed For Flat Towing A 2005 Ford Explorer With A Roadmaster Explorer Tow Bar
Since you have the Roadmaster Explorer tow bar the remaining items you will need are the base plate kit for the 2005 Ford Explorer, the safety cables and the wiring for the lights. The base plate kit you will need for your 2005 Ford Explorer is the Roadmaster XL Base Plate Kit, # 480-1. This base plate kit is the only kit that will work with your Roadmaster Explorer tow bar. It has brackets that will attach to the Ford Explorer and the visible portions of the bracket can be removed when not b
view full answer...

What Components are Need to Tow a 2010 Chevrolet HHR Behind a 22 Foot Gulfstream BT Cruiser RV
It sounds like you pretty much have all your ducks in a row. The mechanic will need one more thing to complete your setup. He will need some sort of tail light system for the Chevy HHR. You can use a temporary light kit that uses magnets, like part # C-ATL20A. Or you can use a diode system like part # RM-154 that the mechanic will wire into the HHR so that when in tow, the factory HHR tail lights will be actiavted by the motorhome. I have added a link to the part numbers below as well as a vi
view full answer...

What Base Plates Are Needed For Towing A 2000 Chevy Tracker 4-Door 4WD
The base plates that you will need for the 2000 Chevy Tracker 4-Door 4WD are the Roadmaster XL Base Plate Kit, # 1012-1. These base plates will not work on models that have a brushguard. These XL series brackets are compatible with the RoadMaster Falcon 2 Tow Bar, # RM-520. You will also need the RoadMaster 68 Inch Single Hook, Coiled Safety Cables, # RM-643, these safety cables will keep the vehicle attached to the tow vehicle in case the coupler becomes detached from the hitch ball. I
view full answer...

What do I need to Flat Tow A 2001 Ford Explorer in the Least Expensive Manner
I am not sure if you will have to disconnect the drive shaft. This varies from vehicle to vehicle and drive line packages within that vehicle. Consult the Explorer Owner Manual to see what will be involved in flat towing your Explorer. The least expensive flat tow route I would recommend is using the Roadmaster Tracker Tow bar, part # RM-020. You will also need base plates that attach to the frame of the Explorer and provide a mounting location for the tow bar. Roadmaster XL Base Plates, part
view full answer...

Additional Equipment Required for Flat Towing a 2010 Toyota Tacoma with Roadmaster Tracker Tow Bar
The Roadmaster Tracker Tow Bar is compatible with the XL bases plates, part # 1175-1, that will fit your 2010 Tacoma as long as it is not an X-Runner model. With these two parts, your tow bar is set. All you have left is wiring/lights and possibly a supplemental braking system. We have two basic options for wiring/lights. You can use a diode wiring kit like part # RM-154. This kit wires diodes into your existing Tacoma wiring and will use the factory Tacoma lights when towing. I have added a
view full answer...

Availability of a Replacement Freedom Latch Handle for a Sterling All Terrain Tow Bar
To replace the latch lever on your discontinued Roadmaster Sterling TowBar, item # RM-576, you will need to use the item # RM-750600, and then put the serial number, that is on your tow bar, in the box provided on that product page.
view full answer...

What Parts Do I Need to Flat Tow a 1999 Chevrolet Suburban
For a complete towing procedure and to see if any additional transmission parts are needed, please refer to your vehicle owner manual. It should have a complete section on towing. The Roadmaster Tracker Tow Bar, part # RM-020, includes the tow bar and crossbar. The tow bar attaches to the cross bar, and the cross bar attaches to a set of base plates. You will also need a set of base plates. These bolt to the underside of your Suburban frame, close to the front bumper. These are the attachm
view full answer...

What is Needed to Tow a 2009 Saturn Vue with Tow Bar RM-520
The Roadmaster Falcon 2 tow bar # RM-520 would be a good choice to tow your 2009 Saturn Vue, but you will need to install base plates on the vehicle in order for the tow bar to connect to it. The base plates for your vehicle would be XL kit # 3151-1A. I would recommend Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 to wire your RV and vehicle for towing. The # RM-154 page shows some great wiring diagrams that should be helpful for your installation. If your Saturn Vue has separa
view full answer...

What is Needed to Flat Tow a 2005 Toyota Echo with Standard Transmission Behind a Motorhome
For your 2005 Toyota Echo we have two options depending on if your Echo is a hatchback or not. For a hatchback: Use base plate kit, # 1174-1 Use tow bar, # RM-520 (instructions included below) Use Magnetic Towing Light Kit, # C-ATL20A Use RoadMaster 68 inch Single Hook, Coiled Safety Cables, # RM643 For all other models (not hatchback): Use base plate kit, # 1167-1 Use tow bar, # RM-520 (instructions included below) Use Magnetic Towing Light Kit, # C-ATL20A Use RoadMaster 68 inch S
view full answer...

How Can I Tow a 2007 Chrysler PT Cruise with Tow Ready Tow Bar Part # 63180
To tow a vehicle, you will need more than just the tow bar. You will also need a base plate kit. A base plate kit attaches to the vehicle frame and provides a place to the tow bar to attach. We carry one base plate kit for your PT Cruiser, RoadMaster part # 278-1. To use the Tow Ready Adjustable tow bar, you will need an adapter as the Tow Ready tow bar will not attach directly to the RoadMaster base plates available for your car. The adapter is RoadMaster part # RM-025. You will also ne
view full answer...

Base Plates, Tow Bar and Accessories to Flat Tow 1999 Ford Mustang
For your 1999 Mustang, you wold need the Roadmaster Base Plate Kit, part # 466-1. You will also need a tow bar, wiring to connect the tail lights of the Mustang to those of the RV, safety cables, and in many states, a supplemental braking system. The Roadmaster Falcon 2 Tow Bar, part # RM-520 is our best seller. It features quick disconnects and telescoping self centering and auto locking arms that make hook up and removal a painless procedure. A Tail Light Isolating Diode wiring system li
view full answer...

Order Tracking
Shipping Information
Contact Us
About Us

Help Videos and Articles
Search
Privacy Policy
Your Account Login