4-Pole 48" Long Vehicle End (Includes 4 Wire Taps)

Tow Ready Wiring - 118001

Tow Ready 4 Way Flat Trailer Connector, Vehicle End by Draw-Tite, Hidden Hitch and Reese

• 18 Gauge Bonded Wires
• Taillight, Stop and Turn functions printed on wires
• Ground Wire Runs Full Length Of Assembly
• 48" Long

Recommended

Wiring Harness Mounting Brackets

Tow Ready # 118001

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Tow Ready Wiring
Do you have a question about this Wiring?

• Trailer Wiring for a 2004 Nissan Frontier
  
• Your vehicle requires a converter to convert the trucks 5-Wire system down to the 4-Wire system used on trailers. You will find a connection point behind the rear bumper on the passenger side frame rail, that you will use to plug in the Plug-N-Tow (TM) Wiring Harness, item # 33515. This wiring harness has a converter installed and plugs inline with the original factory connectors. If you want to hard wire your trailer connection then you could use the Upgraded Circuit Protected Taillight Con
  view full answer...


• How Do I Install a 4-Way Trailer Connector on a 2009 Suzuki Grand Vitara
  
• Part # 118001 will not work on your 2009 Suzukia Grand Vitara. Since the brake and turn signals on your vehicle are on separate circuits, you will need a converter. Part # 118456 is a custom fit harness that will plug into the tail light connectors of your tail lights and convert the separate brake and turn signals to allow proper function with standard 4-Pole trailers. I have added a link to the part and the instructions below.
  view full answer...


• How to Install a 4-Way Flat Trailer Connector on a 2007 GMC Sierra Extended Cab 4X4 Pickup
  
• You can connect the 4-Pole 48 inch Long Vehicle End (with 4 Wire Taps), item # 118001, to the existing trailer wiring harness behind the plug that is located above the spare tire on your Sierra if it is not equipped with a factory trailer connector. To do so you will need to use a circuit tester to identify the wires that right turn and brake signal, the left turn and brake signal, and the tail light signal. Once you have found these wires and labeled them you will connect the white wire on
  view full answer...


• Availability of a Trailer Wiring Diagram for a 2012 Honda Goldwing and 1999 Escapade SE Trailer
  
• Wiring your motorcycle to tow your motorcycle trailer will require some testing and investigation of the lighting configuration on your trailer. First, check the lights on your 1999 Escapade SE trailer. If the trailer has separate lights or bulbs for the turn and stop lights then the trailer will have a 5 wire connector. In this case you will need to contact Honda for wiring for the trailer, that will protect the motorcycles circuitry. If the trailer has combined stop and turn signals then a
  view full answer...