Adapter 7 Pole to 6 Pole Universal with LED Tester

Hopkins Wiring - 47525

Adapter converts your 7 pole plug on the vehicle down to 6 pole plug to fit your trailer's connector.

Note: Center pin is set-up as the hot lead but can easily be changed to work with trailers that have the center pin wired as the brake.


Front side of the plug where the trailer's 6-pole slides into.

back side of the plug that slides into the existing vehicle connector.

Hopkins # 47525; TAP # 37525

Customers compare 47525 to these similar products

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Hopkins Wiring

• Brake Controller Causing Trailer Brakes to Lock Up
  
• It sounds as if something is wired incorrectly. Which trailer connector is on your truck? A 7 way? A 6 way? Are you using a 6 to 7 way adapter? If so, there are two accepted ways of wiring a 6 way plug. If your adapter uses the center pin for the 12V lead, and the trailer uses the center pin for the brake lead, there is your problem. We offer an adapter that is universal. It can be easily changed to work with either configuration. If this is not the case, please reply and we will look into some
  view full answer...