Winches > Electric Trailer Winch > Planetary Gear > 2700 lbs > Load Holding Brake > Dutton-Lainson

Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs (Canada)

Code: DL24960

Price:$499.95

Shipping Weight: 34 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Dutton-Lainson Winches - DL24960

This winch includes a 50' cable that increases the load capacity with double-line-pulling capability. Winch works anywhere AC power is available and includes a Load/Unload switch and a spring-loaded clutch for releasing cargo without power.

Features:

Load/Unload, 3-position power switch
- Automatically returns to "Off" position when released
Spring-loaded clutch lever for releasing load without power
- Provides smooth load control from locked or freewheel position
  - Automatically returns to locked position when released
  - Freewheel option allows cable to be removed by hand
Mechanical friction break
120-Volt, AC operation
- 10', 3-Wire grounded power cord
Flexible, high-strength, 7 strand x 19 gauge, galvanized aircraft cable
- Pulley block and snap hook included for double-line pulling
- 50' of Cable - great for double-line operation
- Safety snap hook keeps load securely attached
- Wire cable can be swapped out for 2" wide strap
Emergency crank handle comes standard
- Use in the event of power failure
Heat-treated gears provide smoother, quieter ride and greater strength
Precision needle bearings in high-load areas
- Create low friction and promote longer life
Die-formed base is adapted for quick-mounting applications
High-impact, weather-resistant case
- Provides excellent protection for internal components
- Safer than open-reel models
Brushed stainless steel front plate for superior rust resistance
Made in the USA

Specs:

Load capacity: 2,700 lbs
- Double-line capacity: 4,000 lbs
- Rating based on 10' pull
Current draw: 6 amps at 120 volts
- Electric winches should be used intermittently - maximum continuous run time is 4 minutes
Gear ratio: 570:1
Cable dimensions: 7/32" diameter x 50' long
Load speed (feet per minute):
- No Load/Full Reel - 9
- Full Load/Full Reel - 4
CSA and OSHA certified
1-Year limited warranty

Determining Your Load Capacity

A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating factors, however, that will determine the appropriate winch size for your purposes.

The ratio can be stretched to 3:1 in instances when the trailer in use has high-quality rollers and is most commonly used on ramps where boats float most of the way onto the trailer.

In contrast, using a boat trailer that has wooden bunks, lacks self-alignment capabilities, and is most commonly used on ramps where the boat must be winched most of the way onto the trailer reduces the ratio to 1:1.

Note that pontoon trailers and other special designs require special consideration when determining winch capacity.

Percent Incline	Multiply By
Level Surface	10.0
5 (3 degrees)	6.67
10 (6 degrees)	5.02
20 (11 degrees)	3.40
30 (17 degrees)	2.61
50 (26 degrees)	1.86
70 (35 degrees)	1.53
100 (45 degrees)	1.29

Determining Your Rolling Load Capacity

To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the winch capacity by a factor determined by the degree of the incline.

The multiplication factor shown includes a 10 percent rolling friction factor. Note: A 5 percent - or 3 degree - incline is a 1/2' rise in 10'. Follow the chart to determine your winch's rolling load capacity.

Mounting Your Winch

Note:

All Dutton-Lainson StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.